[WHY]
1. The driver forgot to call device_remove_file()
in sh_mobile_lcdc_overlay_fb_unregister(), and there was
no error handling when calling device_create_file() failed.
2. This should probably use device_add_group() instead of
individual files to simplify both creation and removal. [Arnd]
3. The driver core can register and cleanup sysfs groups already.
as commit 95cdd538e0 ("fbdev: efifb: Register sysfs groups
through driver core").
[HOW]
Register sysfs groups through driver core.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
mdacon has roughly the same dependencies as vgacon but expresses them
as a negative list instead of a positive list, with the only practical
difference being PowerPC/CHRP, which uses vga16fb instead of vgacon.
The CONFIG_MDA_CONSOLE description advises to only turn it on when vgacon
is also used because MDA/Hercules-only systems should be using vgacon
instead, so just change the list to enforce that directly for simplicity.
The probing was broken from 2002 to 2008, this improves on the fix
that was added then: If vgacon is a loadable module, then mdacon
cannot be built-in now, and the list of systems that support vgacon
is carried over.
Fixes: 0b9cf3aa6b ("mdacon messing up default vc's - set default to vc13-16 again")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
dummycon fails to build on ARM/footbridge when the VGA console is
disabled, since I got the dependencies slightly wrong in a previous
patch:
drivers/video/console/dummycon.c: In function 'dummycon_init':
drivers/video/console/dummycon.c:27:25: error: 'CONFIG_DUMMY_CONSOLE_COLUMNS' undeclared (first use in this function); did you mean 'CONFIG_DUMMY_CONSOLE'?
27 | #define DUMMY_COLUMNS CONFIG_DUMMY_CONSOLE_COLUMNS
drivers/video/console/dummycon.c:28:25: error: 'CONFIG_DUMMY_CONSOLE_ROWS' undeclared (first use in this function); did you mean 'CONFIG_DUMMY_CONSOLE'?
28 | #define DUMMY_ROWS CONFIG_DUMMY_CONSOLE_ROWS
This only showed up after many thousand randconfig builds on Arm, and
doesn't matter in practice, but should still be fixed. Address it by
using the default row/columns on footbridge after all in that corner
case.
Fixes: 4293b09251 ("dummycon: limit Arm console size hack to footbridge")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409151512.LML1slol-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Dummycon is used as a fallback conswitchp for vgacon and fbcon
in the VT code, and there are no references to it if all three
are disabled, so just leave it out of the kernel image for
configurations without those.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “au1100fb_setmode”.
This issue was detected by using the Coccinelle software.
Fixes: 3b495f2bb7 ("Au1100 FB driver uplift for 2.6.")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The erase colour calculation for fbcon clearing should use get_color instead
of attr_col_ec, like everything else. The latter is similar but is not correct.
For example it's missing the depth dependent remapping and doesn't care about
blanking.
The problem can be reproduced by setting up the background colour to grey
(vt.color=0x70) and having an fbcon console set to 2bpp (4 shades of gray).
Now the background attribute should be 1 (dark gray) on the console.
If the screen is scrolled when pressing enter in a shell prompt at the bottom
line then the new line is cleared using colour 7 instead of 1. That's not
something fillrect likes (at 2bbp it expect 0-3) so the result is interesting.
This patch switches to get_color with vc_video_erase_char to determine the
erase colour from attr_col_ec. That makes the latter function redundant as
no other users were left.
Use correct erase colour for clearing in fbcon
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
I was wondering why there's garbage at the bottom of the screen when
tile blitting is used with an odd mode like 1080, 600 or 200. Sure there's
only space for half a tile but the same area is clean when the buffer
is bitmap.
Then later I found that it's supposed to be cleaned but that's not
implemented. So I took what's in bitblit and adapted it for tileblit.
This implementation was tested for both the horizontal and vertical case,
and now does the same as what's done for bitmap buffers.
If anyone is interested to reproduce the problem then I could bet that'd
be on a S3 or Ark. Just set up a mode with an odd line count and make
sure that the virtual size covers the complete tile at the bottom. E.g.
for 600 lines that's 608 virtual lines for a 16 tall tile. Then the
bottom area should be cleaned.
For the right side it's more difficult as there the drivers won't let an
odd size happen, unless the code is modified. But once it reports back a
few pixel columns short then fbcon won't use the last column. With the
patch that column is now clean.
Btw. the virtual size should be rounded up by the driver for both axes
(not only the horizontal) so that it's dividable by the tile size.
That's a driver bug but correcting it is not in scope for this patch.
Implement missing margin clearing for tileblit
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Pull mtd updates from Miquel Raynal:
"MTD changes:
- The atmel,dataflash binding has been converted to yaml and the
physmap one constrained. Some logs are improved, error path are
getting reworked a bit, few patches target the use of
str_enabled_disabled().
Raw NAND changes:
- i.MX8 and i.MX31 now have their own compatible, the Qcom driver got
cleaned, the Broadcom driver got fixed.
SPI NAND changes:
- OTP support has been brought, and ESMT and Micron manufacturer
drivers implement it.
- Read retry, and Macronix manufacturer driver implement it.
SPI NOR changes:
- Adding support for few flashes. Few cleanup patches for the core
driver, where we touched the headers inclusion list and we start
using the scope based mutex cleanup helpers.
There is also a bunch of minor improvements and fixes in drivers
and bindings"
* tag 'mtd/for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (34 commits)
dt-bindings: mtd: atmel,dataflash: convert txt to yaml
mtd: mchp48l640: Use str_enable_disable() in mchp48l640_write_prepare()
mtd: rawnand: gpmi: Use str_enabled_disabled() in gpmi_nand_attach_chip()
mtd: mtdpart: Do not supply NULL to printf()
dt-bindings: mtd: gpmi-nand: Add compatible string for i.MX8 chips
mtd: nand: Fix a kdoc comment
mtd: spinand: Improve spinand_info macros style
mtd: spi-nor: drop unused <linux/of_platform.h>
mtd: spi-nor: explicitly include <linux/of.h>
mtd: spi-nor: explicitly include <linux/math64.h>
mtd: spi-nor: macronix: add support for mx66{l2, u1}g45g
mtd: spi-nor: macronix: Add post_sfdp fixups for Quad Input Page Program
mtd: Fix error handling in mtd_device_parse_register() error path
mtd: capture device name setting failure when adding mtd
mtd: Add check for devm_kcalloc()
mtd: Replace kcalloc() with devm_kcalloc()
dt-bindings: mtd: physmap: Ensure all properties are defined
mtd: rawnand: brcmnand: fix PM resume warning
dt-bindings: mtd: mxc-nand: Document fsl,imx31-nand
mtd: spinand: macronix: Add support for read retry
...
Pull HID updates from Jiri Kosina:
- PlayStation 5 controllers support (Alex Henrie)
- big revamp and modernization of the aged hid-pidff force feedback
driver (Tomasz Pakuła)
- conversion of hid-lg-g15 to standard multicolor LED API (Kate Hsuan)
- improvement of behavior of Human Presence Sensor (HPD) in amd_sfh
driver (Mario Limonciello)
- other assorted fixes, code cleanups and device ID additions
* tag 'hid-for-linus-2025032601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (70 commits)
HID: remove superfluous (and wrong) Makefile entry for CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER
HID: Intel-thc-hid: Intel-quickspi: Correct device state names gramatically
HID: wacom: Remove static WACOM_PKGLEN_MAX limit
HID: amd_sfh: Don't show wrong status for amd_sfh_hpd_info()
HID: amd_sfh: Default to HPD disabled
HID: amd_sfh: Allow configuring whether HPD is enabled or disabled
HID: pidff: Fix set_device_control()
HID: pidff: Fix 90 degrees direction name North -> East
HID: pidff: Compute INFINITE value instead of using hardcoded 0xffff
HID: pidff: Clamp effect playback LOOP_COUNT value
HID: pidff: Rename two functions to align them with naming convention
HID: lenovo: silence unreachable code warning
HID: lenovo: Fix to ensure the data as __le32 instead of u32
HID: bpf: add a v6.11+ compatible BPF fixup for the XPPen ACK05 remote
HID: bpf: new hid_bpf_async.h common header
HID: bpf: import new kfunc from v6.10 & v6.11
HID: bpf: add support for the XP-Pen Artist Pro 19 (gen2)
HID: bpf: Added updated Kamvas Pro 19 descriptor
HID: bpf: Suppress bogus F13 trigger on Sirius keyboard full fan shortcut
HID: bpf: Add support for the default firmware mode of the Huion K20
...
Pull x86 platform drivers updates from Ilpo Järvinen:
- alienware-wmi:
- Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities:
- Support for mic & audio mute LEDs
- samsung-galaxybook:
- Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl:
- RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits)
platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig
platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
irqdomain: platform/x86: Switch to irq_domain_create_linear()
platform/x86/amd/pmc: fix leak in probe()
tools/power/x86/intel-speed-select: v1.22 release
tools/power/x86/intel-speed-select: Prefix header search path with sysroot
tools/power/x86/intel-speed-select: Die ID for IO dies
tools/power/x86/intel-speed-select: Fix the condition to check multi die system
tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE
platform/x86/amd/pmc: Use managed APIs for mutex
platform/x86/amd/pmc: Remove unnecessary line breaks
platform/x86/amd/pmc: Move macros and structures to the PMC header file
platform/x86/amd/pmc: Notify user when platform does not support s0ix transition
platform/x86: dell-ddv: Use the power supply extension mechanism
platform/x86: dell-ddv: Use devm_battery_hook_register
platform/x86: dell-ddv: Fix temperature calculation
platform/x86: thinkpad_acpi: check the return value of devm_mutex_init()
platform/x86: samsung-galaxybook: Fix block_recording not supported logic
platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static
...
* Raw NAND changes:
i.MX8 and i.MX31 now have their own compatible, the Qcom driver got
cleaned, the Broadcom driver got fixed.
* SPI NAND changes:
Two main features have been added:
- OTP support has been brought, and ESMT and Micron manufacturer drivers
implement it.
- Read retry, and Macronix manufacturer driver implement it.
There is as well a bunch of minor improvements and fixes in drivers and
bindings.
SPI NOR adds support for few flashes. Few cleanup patches for the core
driver, where we touched the headers inclusion list and we start using
the scope based mutex cleanup helpers.
Pull sound updates from Takashi Iwai:
"We've received lots of commits at this time, as a result of various
cleanup and refactoring works as well as a few new drivers and the
generic SoundWire support. Most of changes are device-specific, little
about the core changes. Some highlights below:
Core:
- A couple of (rather minor) race fixes in ALSA sequencer code
- A regression fix in ALSA timer code that may lead to a deadlock
ASoC:
- A large series of code conversion to use modern terminology for the
clocking configuration
- Conversions of PM ops with the modern macros in all ASoC drivers
- Clarification of the control operations
- Prepartory work for more generic SoundWire SCDA controls
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95,
nVidia Tegra interconnects, Rockchip RK3588 S/PDIF, Texas
Instruments SN012776 and TAS5770L, and Wolfson WM8904 DMICs
Others:
- Conversions of PM ops with the modern macros in the rest drivers
- USB-audio quirks and fixes for Presonus Studio, DJM-A9, CME
- HD-audio quirks and fixes ASUS, HP, Lenovo, and others"
* tag 'sound-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (651 commits)
ALSA: hda: tas2781-i2c: Remove unnecessary NULL check before release_firmware()
ALSA: hda: cs35l56: Remove unnecessary NULL check before release_firmware()
ALSA: hda/realtek: Bass speaker fixup for ASUS UM5606KA
ALSA: hda/realtek: Fix built-in mic assignment on ASUS VivoBook X515UA
ALSA: hda/realtek: Add support for various HP Laptops using CS35L41 HDA
ALSA: timer: Don't take register_mutex with copy_from/to_user()
ASoC: SDCA: Correct handling of selected mode DisCo property
ASoC: amd: yc: update quirk data for new Lenovo model
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3247
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3315
ASoC: SOF: mediatek: Commonize duplicated functions
ASoC: dmic: Fix NULL pointer dereference
ASoC: wm8904: add DMIC support
ASoC: wm8904: get platform data from DT
ASoC: dt-bindings: wm8904: Add DMIC, GPIO, MIC and EQ support
ASoC: wm8904: Don't touch GPIO configs set to 0xFFFF
of: Add of_property_read_u16_index
ALSA: oxygen: Fix dependency on CONFIG_PM_SLEEP
ASoC: ops: Apply platform_max after deciding control type
ASoC: ops: Remove some unnecessary local variables
...
From: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
This patch series is focused on improving the compatibility and usability of the
hid-pidff force feedback driver. Last patch introduces a new, universal driver
for PID devices that need some special handling like report fixups, remapping the
button range, managing new pidff quirks and setting desirable fuzz/flat values.
This work has been done in the span of the past months with the help of the great
Linux simracing community, with a little input from sim flight fans from FFBeast.
No changes interfere with compliant and currently working PID devices.
"Generic" codepath was tested as well with Moza and Simxperience AccuForce v2.
I'm not married to the name. It's what we used previously, but if "universal" is
confusing (pidff is already the generic driver), we can come up with something
better like "hid-quirky-pidff" :)
With v8 and tiny finx in v9, all the outstanding issues were resolved,
additional pidff issues were fixed and hid-pidff defines moved to a dedicated
header file. This patch series could be considered done bar any comments and
requests from input maintainers.
I could save more then a dozen lines of code by changing simple if statements
to only occupy on line instead of two in there's a need for that.
From: Mario Limonciello <mario.limonciello@amd.com>
Some platforms include a human presence detection (HPD) sensor. When
enabled and a user is detected a wake event will be emitted from the
sensor fusion hub that software can react to.
Example use cases are "wake from suspend on approach" or to "lock
when leaving".
This is currently enabled by default on supported systems, but users
can't control it. This essentially means that wake on approach is
enabled which is a really surprising behavior to users that don't
expect it.
Instead of defaulting to enabled add a sysfs knob that users can
use to enable the feature if desirable and set it to disabled by
default.
Pull auxdisplay updates from Andy Shevchenko:
- Refactor a couple of APIs to reduce amount of calls to memory
allocator
- Miscellaneous small fixes and improvements
* tag 'auxdisplay-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay:
auxdisplay: hd44780: Rename hd to hdc in hd44780_common_alloc()
auxdisplay: hd44780: Call charlcd_alloc() from hd44780_common_alloc()
auxdisplay: panel: Make use of hd44780_common_free()
auxdisplay: hd44780: Make use of hd44780_common_free()
auxdisplay: hd44780: Introduce hd44780_common_free()
auxdisplay: lcd2s: Allocate memory for custom data in charlcd_alloc()
auxdisplay: charlcd: Partially revert "Move hwidth and bwidth to struct hd44780_common"
auxdisplay: panel: Fix an API misuse in panel.c
auxdisplay: hd44780: Fix an API misuse in hd44780.c
auxdisplay: MAX6959 should select BITREVERSE
auxdisplay: seg-led-gpio: use gpiod_multi_set_value_cansleep
Pull chrome platform updates from Tzung-Bi Shih:
- Support ACPI match for Framework systems
- Expose new sysfs for:
- PD mux status for each EC-managed Type-C port
- EC feature of AP mode entry
- Setting USB mode of EC Type-C
* tag 'chrome-platform-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Add support for setting USB mode via sysfs
platform/chrome: cros_ec_sysfs: Expose AP_MODE_ENTRY feature state
platform/chrome: cros_ec_sysfs: Expose PD mux status
platform/chrome: cros_ec_lpc: Match on Framework ACPI device
MAINTAINERS: Update maintainers for ChromeOS USBC related drivers
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add dev_pm_genpd_rpm_always_on() to support more fine-grained PM
pmdomain providers:
- arm: Remove redundant state verification for the SCMI PM domain
- bcm: Add system-wakeup support for bcm2835 via GENPD_FLAG_ACTIVE_WAKEUP
- rockchip: Add support for regulators
- rockchip: Use SMC call to properly inform firmware
- sunxi: Add V853 ppu support
- thead: Add support for RISC-V TH1520 power-domains
firmware:
- Add support for the AON firmware protocol for RISC-V THEAD
cpuidle-psci:
- Update section in MAINTAINERS for cpuidle-psci
- Add trace support for PSCI domain-idlestates"
* tag 'pmdomain-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (29 commits)
firmware: thead: add CONFIG_MAILBOX dependency
firmware: thead,th1520-aon: Fix use after free in th1520_aon_init()
pmdomain: arm: scmi_pm_domain: Remove redundant state verification
pmdomain: thead: fix TH1520_AON_PROTOCOL dependency
pmdomain: thead: Add power-domain driver for TH1520
dt-bindings: power: Add TH1520 SoC power domains
firmware: thead: Add AON firmware protocol driver
dt-bindings: firmware: thead,th1520: Add support for firmware node
pmdomain: rockchip: add regulator dependency
pmdomain: rockchip: add regulator support
pmdomain: rockchip: fix rockchip_pd_power error handling
pmdomain: rockchip: reduce indentation in rockchip_pd_power
pmdomain: rockchip: forward rockchip_do_pmu_set_power_domain errors
pmdomain: rockchip: cleanup mutex handling in rockchip_pd_power
dt-bindings: power: rockchip: add regulator support
pmdomain: rockchip: Fix build error
pmdomain: imx: gpcv2: use proper helper for property detection
MAINTAINERS: Update section for cpuidle-psci
pmdomain: rockchip: Check if SMC could be handled by TA
cpuidle: psci: Add trace for PSCI domain idle
...
Pull MMC updates from Ulf Hansson:
"MMC host:
- atmel-mci: Convert DT bindings to json schema
- dw_mmc: Add support for the Exynos7870 variant
- dw_mmc-rockchip: Add support for the RK3562/3528 variants
- omap: Fix potential memory leak in the probe error path
- renesas_sdhi: Add support for RZ/G3E variants
- sdhci: Disable SD card clock before changing parameters
- sdhci-esdhc-imx: Add support for the i.MX94 variant
- sdhci-of-dwcmshc: Add support for the RK3562/RK3528 variants
- sdhci-omap: Disable aggressive PM for eMMC/SD-cards
- sdhci-pci-core: Wait for VDD to settle on card power off
- sdhci-pxav3: Fix busy-signalling by using MMC_CAP_NEED_RSP_BUSY
- sunxi-mmc: Add support for the A523 variant
MEMSTICK:
- rtsx_usb_ms: Fix potential use-after-free during remove"
* tag 'mmc-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
mmc: core: Remove redundant null check
mmc: host: Wait for Vdd to settle on card power off
mmc: omap: Fix memory leak in mmc_omap_new_slot
memstick: rtsx_usb_ms: Fix slab-use-after-free in rtsx_usb_ms_drv_remove
mmc: renesas_sdhi: fix error code in renesas_sdhi_probe()
mmc: sdhci-pxav3: set NEED_RSP_BUSY capability
mmc: sdhci-omap: Disable MMC_CAP_AGGRESSIVE_PM for eMMC/SD
tty: mmc: sdio: use bool for cts and remove parentheses
dt-bindings: mmc: sunxi: add compatible strings for Allwinner A523
dt-bindings: mmc: sunxi: Simplify compatible string listing
dt-bindings: mmc: sdhci-of-dwcmhsc: Add compatible string for RK3528
dt-bindings: mmc: rockchip-dw-mshc: Add compatible string for RK3528
mmc: renesas_sdhi: Add support for RZ/G3E SoC
dt-bindings: mmc: renesas,sdhi: Document RZ/G3E support
dt-bindings: mmc: rockchip-dw-mshc: Add support for rk3562
dt-bindings: mmc: Add support for rk3562 eMMC
mmc: core: Trim trailing whitespace from card product names
dt-bindings: mmc: atmel,hsmci: Convert to json schema
dt-bindings: mmc: mmc-slot: Make compatible property optional
dt-bindings: mmc: fsl-imx-esdhc: Add i.MX94 support
...
Pull gpio updates from Bartosz Golaszewski:
"There are no new drivers this time but several changes to the core
GPIO framework and various driver updates.
This release cycle, we're starting a relatively straightforward but
tedious rework of the GPIO consumer API: for historical reasons, the
gpiod_set_value() variants would return void. Not only that but the
GPIO provider interface does not even allow drivers to return a value
to GPIO core. This is because initial GPIO controllers would be MMIO
based and could not fail. We've had I2C, SPI and USB controllers for
years too but no way of indicating failures to callers.
This changes the consumer interface, adds new provider callbacks and
starts converting the drivers under drivers/gpio/ to using them. Once
this gets upstream, we'll keep on converting GPIO drivers that live
elsewhere and once there are no more users of the old callbacks, we'll
remove them and rename the new ones to the previous name. I imagine
the last step would happen in one sweeping change like what you did
for the remove_new() -> remove() renaming.
We've also addressed an issue where invalid return values from GPIO
drivers would get propagated to user-space by adding some
GPIO-core-level sanitization. Again: not a complex change but way
overdue.
Other than that: lots of driver and core refactoring, DT-bindings
changes and some other minor changes like coding style fixes or header
reordering.
GPIO core:
- add sanitization of return values of GPIO provider callbacks so
that invalid ones don't get propagated to user-space
- add new variants of the line setter callbacks for GPIO providers
that return an integer and allow to indicate driver errors to the
GPIO core
- change the interface of all gpiod_set_value() variants to return an
integer thus becoming able to indicate failures in the underlying
layer to callers
- drop unneeded ERR_CAST in gpiolib-acpi
- use for_each_if() where applicable
- provide gpiod_multi_set_value_cansleep() as a new, simpler
interface to gpiod_set_array_value_cansleep() and use it across
several drivers treewide
- reduce the number of atomic reads of the descriptor flags in
gpiolib debugfs code
- simplify for_each_hwgpio_in_range() and
for_each_requested_gpio_in_range()
- add support for three-cell GPIO specifiers in GPIO OF code
- don't build HTE (hardware timestamp engine) GPIO code with the HTE
subsystem disabled in Kconfig
- unduplicate calls to gpiod_direction_input_nonotify()
- rework the handling of the valid_mask property of GPIO chips: don't
allow drivers to set it as it should only be handled by GPIO core
and start actually enforcing it in GPIO core for *all* drivers, not
only the ones implementing a custom request() callback
- get the `ngpios` property from the fwnode of the GPIO chip, not its
device in order to handle multi-bank GPIO chips
Driver improvements:
- convert a part of the GPIO drivers under drivers/gpio/ to using the
new value setter callbacks
- convert several drivers to using automatic lock guards from
cleanup.h
- allow building gpio-bt8xx with COMPILE_TEST=y
- refactor gpio-74x164 (use devres, cleanup helpers, __counted_by()
and bits.h macros)
- refactor gpio-latch (use generic device properties, lock guards and
some local variables for better readability)
- refactor gpio-xilinx (improve the usage of the bitmap API)
- support multiple virtual GPIO controller instances in gpio-virtio
- allow gpio-regmap to use the standard `ngpios` property from
GPIOLIB
- factor out the common code for synchronous probing of virtual GPIO
devices into its own library
- use str_enable_disable(), str_high_low() and other string helpers
where applicable
- extend the gpio-mmio abstraction layer to allow calling into the
pinctrl back-end when setting direction
- convert gpio-vf610 to using the gpio-mmio library
- use more devres in gpio-adnp
- add support for reset-gpios in gpio-pcf857x
- add support for more models to gpio-loongson-64bit
DT bindings:
- add new compatibles to gpio-vf610 and gpio-loongson
- add missing gpio-ranges property to gpio-mvebu
- add reset-gpios to nxp,pcf8575
- enable gpio-hog parsing in ast2400-gpio
Misc:
- coding style improvements
- kerneldoc fixes
- includes reordering
- updates to the TODO list"
* tag 'gpio-updates-for-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (119 commits)
gpio: TODO: add an item to track reworking the sysfs interface
gpio: TODO: add an item to track the conversion to the new value setters
gpio: TODO: add delimiters between tasks for better readability
gpio: TODO: remove the pinctrl integration task
gpio: TODO: remove task duplication
gpio: TODO: remove the item about the new debugfs interface
gpio: da9055: use new line value setter callbacks
gpio: da9052: use new line value setter callbacks
gpio: cs5535: use new line value setter callbacks
gpio: crystalcove: use new line value setter callbacks
gpio: cros-ec: use new line value setter callbacks
gpio: creg-snps: use new line value setter callbacks
gpio: cgbc: use new line value setter callbacks
gpio: bt8xx: use new line value setter callbacks
gpio: bt8xx: use lock guards
gpio: bt8xx: allow to build the module with COMPILE_TEST=y
gpio: bd9571mwv: use new line value setter callbacks
gpio: bd71828: use new line value setter callbacks
gpio: bd71815: use new line value setter callbacks
gpio: bcm-kona: use new line value setter callbacks
...
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for HTU31
- Congatec Board Controller monitoring driver
- Driver for TI INA233 Current and Power Monitor
Support for additional chips or boards in existing drivers:
- pmbus/ltc2978: Add support for LT717x and LTM4673
- asus-ec-sensors: Add PRIME X670E-PRO WIFI
- k10temp: Add support for cyan skillfish
- nct6683: Add customer ID for AMD BC-250
- lm90: Add support for NCT7716, NCT7717 and NCT7718
Other notable improvements in existing drivers:
- emc2305: Add devicetree support, and use
devm_thermal_of_cooling_device_register
- acpi_power_meter: Convert to with_info API
- dell-smm: Increase the number of fans
- pmbus/core: Optimize debugfs support and use i2c_client
debugfs directory
- hwmon core: Fix the missing of 'average' word in
hwmon_power_attr_templates
- Various drivers: Use per-client debugfs entry provided by
I2C subsystem"
* tag 'hwmon-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
hwmon: emc2305: Use devm_thermal_of_cooling_device_register
hwmon: emc2305: Add OF support
dt-bindings: hwmon: Add Microchip emc2305 support
dt-bindings: hwmon: Drop stray blank line in the header
hwmon: (acpi_power_meter) Replace the deprecated hwmon_device_register
hwmon: add driver for HTU31
dt-bindings: hwmon: Add description for sensor HTU31
hwmon: Add driver for TI INA233 Current and Power Monitor
dt-bindings: hwmon: ti,ina2xx: Add INA233 device
hwmon: Add Congatec Board Controller monitoring driver
hwmon: (pmbus/ltc2978) add support for lt717x
dt-bindings: hwmon: ltc2978: add support for LT717x
hwmon: (pmbus/ltc2978) Add support for LT717x - docs
hwmon: (dell-smm) Increment the number of fans
hwmon: (ntc_thermistor) return error instead of clipping on OOB
hwmon: (pt5161l) Use per-client debugfs entry
hwmon: Fix the missing of 'average' word in hwmon_power_attr_templates
hwmon: (acpi_power_meter) Fix the fake power alarm reporting
hwmon: (gpio-fan) Add missing mutex locks
dt-bindings: hwmon: gpio-fan: Add optional regulator support
...
Pull pwm updates from Uwe Kleine-König:
"Here comes the usual mix of cleanups, new dt-bindings for existing
drivers and nexus nodes; and a new driver for the pwm subsystem.
Patches were contributed by Andy Shevchenko, Chen Wang, Chukun Pan,
Frank Li, Herve Codina, Kever Yang, and Nam Cao. Patch feedback was
provided by Andy Shevchenko, Conor Dooley, Daniel Mack, Duje
Mihanović, Heiko Stuebner, Herve Codina, Krzysztof Kozlowski, Neil
Armstrong, Rob Herring, and Zack Rusin. Thanks to all of them"
* tag 'pwm/for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
dt-bindings: pwm: imx: Add i.MX93, i.MX94 and i.MX95 support
dt-bindings: pwm: rockchip: Add rockchip,rk3528-pwm
pwm: stmpe: Allow to compile as a module
pwm: Check for CONFIG_PWM using IS_REACHABLE() in main header
dt-bindings: pwm: rockchip: Add rockchip,rk3562-pwm
pwm: Strengthen dependency for PWM_SIFIVE
pwm: clps711x: Drop of_match_ptr() usage for .of_match_table
pwm: pca9685: Drop ACPI_PTR() and of_match_ptr()
pwm: Add support for pwm nexus dt bindings
dt-bindings: pwm: Add support for PWM nexus node
pwm: Add upgrade path to #pwm-cells = <3> for users of of_pwm_single_xlate()
pwm: gpio: Switch to use hrtimer_setup()
pwm: sophgo: add driver for Sophgo SG2042 PWM
dt-bindings: pwm: sophgo: add PWM controller for SG2042
pwm: lpss: Only include <linux/pwm.h> where needed
Pull spi updates from Mark Brown:
"The biggest change for SPI this release is the addition of offload
support from David Lechner, allowing the hardware to trigger SPI
transactions autonomously. The initial use case is for triggering IIO
operations but there are other applications where having the hardware
ready to go at a minimal signal is useful for synchronising with
external inputs (eg, interrupt handling) or reducing latency (eg, CAN
networking).
Otherwise there's the usual fixes, improvements and cleanups, plus
support for a bunch of new devices.
- Support for offloading support from David Lechner
- Support for GOcontrol1 Moduline modules, Mediatek MT7988, NXP
i.MX94, Qualcomm SPI NAMD, Rockchip RK3562, Sophogo SG2044 and ST
STM32 OSPI"
* tag 'spi-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (59 commits)
spi: spi-mem: Introduce a default ->exec_op() debug log
spi: dt-bindings: cdns,qspi-nor: Require some peripheral properties
spi: dt-bindings: cdns,qspi-nor: Deprecate the Cadence compatible alone
spi: dt-bindings: cdns,qspi-nor: Be more descriptive regarding what this controller is
spi: stm32-ospi: Include "gpio/consumer.h"
MAINTAINERS: adjust the file entry in GOCONTROLL MODULINE MODULE SLOT
spi: spi-qpic-snand: avoid memleak in qcom_spi_ecc_init_ctx_pipelined()
spi: spi-mux: Fix coverity issue, unchecked return value
spi: sophgo: fix incorrect type for ret in sg2044_spifmc_write()
spi: sg2044-nor: fix uninitialized variable in probe
spi: sg2044-nor: fix signedness bug in sg2044_spifmc_write()
spi: sg2044-nor: Convert to dev_err_probe()
spi: sg2044-nor: Fully convert to device managed resources
dt-bindings: spi: add compatibles for mt7988
spi: spidev: Add an entry for the gocontroll moduline module slot
MAINTAINERS: add maintainer for the GOcontroll Moduline module slot
dt-bindings: connector: Add the GOcontroll Moduline module slot bindings
dt-bindings: vendor-prefixes: add GOcontroll
spi: Use inclusive language
spi: cadence-qspi: Improve spi memory performance
...
Pull regulator updates from Mark Brown:
"This has been a very quiet release, we've got support for one device
added, another removed, and some smaller fixes and API improvements.
The main thing of note is the rework of the PCA9450 LDO5 handling.
- A rework of the handling of LDO5 on the PCA9450, this was quite
wrong in how it handled the SD_VSEL conrol and only worked for some
system designs. This includes a DTS update since there was a not
quite ABI compatible change as part of the fix
- A devres change introducing devm_kmemdup_array() was pulled in so
it could be used with some regulator conversions to that function,
this pulled in some other devres and IIO stuff that was part of the
same pull request
- Removal of the PCF50633 driver, the SoC for the OpenMoko platform
that used it has been removed
- Support for the NXP PF9453"
* tag 'regulator-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
regulator: axp20x: AXP717: dcdc4 doesn't have delay
regulator: dt-bindings: rtq2208: Cleanup whitespace
regulator: dt-bindings: rtq2208: Mark fixed LDO VOUT property as deprecated
regulator: rtq6752: make const read-only array fault_mask static
regulator: pf9453: add PMIC PF9453 support
regulator: dt-bindings: pca9450: Add nxp,pf9453 compatible string
regulator: pcf50633-regulator: Remove
regulator: pca9450: Handle hardware with fixed SD_VSEL for LDO5
regulator: cros-ec: use devm_kmemdup_array()
regulator: devres: use devm_kmemdup_array()
regulator: Add (devm_)of_regulator_get()
devres: Introduce devm_kmemdup_array()
iio: imu: st_lsm9ds0: Replace device.h with what is needed
driver core: Split devres APIs to device/devres.h
err.h: move IOMEM_ERR_PTR() to err.h
regulator: pca9450: Remove duplicate code in probe
regulator: ad5398: Fix incorrect power down bit mask
regulator: pca9450: Fix enable register for LDO5
regulator: pca9450: Fix control register for LDO5
Revert "regulator: pca9450: Add SD_VSEL GPIO for LDO5"
...
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
Pull fscrypt updates from Eric Biggers:
"A fix for an issue where CONFIG_FS_ENCRYPTION could be enabled without
some of its dependencies, and a small documentation update"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: mention init_on_free instead of page poisoning
fscrypt: drop obsolete recommendation to enable optimized ChaCha20
Revert "fscrypt: relax Kconfig dependencies for crypto API algorithms"
Pull fsverity updates from Eric Biggers:
"A fix for an issue where CONFIG_FS_VERITY could be enabled without
some of its dependencies, and a small documentation update"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
Revert "fsverity: relax build time dependency on CRYPTO_SHA256"
Documentation: add a usecase for FS_IOC_READ_VERITY_METADATA
Pull smack updates from Casey Schaufler:
"This is a larger set of patches than usual, consisting of a set of
build clean-ups, a rework of error handling in setting up CIPSO label
specification and a bug fix in network labeling"
* tag 'Smack-for-6.15' of https://github.com/cschaufler/smack-next:
smack: recognize ipv4 CIPSO w/o categories
smack: Revert "smackfs: Added check catlen"
smack: remove /smack/logging if audit is not configured
smack: ipv4/ipv6: tcp/dccp/sctp: fix incorrect child socket label
smack: dont compile ipv6 code unless ipv6 is configured
Smack: fix typos and spelling errors
Pull selinux updates from Paul Moore:
- Add additional SELinux access controls for kernel file reads/loads
The SELinux kernel file read/load access controls were never updated
beyond the initial kernel module support, this pull request adds
support for firmware, kexec, policies, and x.509 certificates.
- Add support for wildcards in network interface names
There are a number of userspace tools which auto-generate network
interface names using some pattern of <XXXX>-<NN> where <XXXX> is a
fixed string, e.g. "podman", and <NN> is a increasing counter.
Supporting wildcards in the SELinux policy for network interfaces
simplifies the policy associted with these interfaces.
- Fix a potential problem in the kernel read file SELinux code
SELinux should always check the file label in the
security_kernel_read_file() LSM hook, regardless of if the file is
being read in chunks. Unfortunately, the existing code only
considered the file label on the first chunk; this pull request fixes
this problem.
There is more detail in the individual commit, but thankfully the
existing code didn't expose a bug due to multi-stage reads only
taking place in one driver, and that driver loading a file type that
isn't targeted by the SELinux policy.
- Fix the subshell error handling in the example policy loader
Minor fix to SELinux example policy loader in scripts/selinux due to
an undesired interaction with subshells and errexit.
* tag 'selinux-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: get netif_wildcard policycap from policy instead of cache
selinux: support wildcard network interface names
selinux: Chain up tool resolving errors in install_policy.sh
selinux: add permission checks for loading other kinds of kernel files
selinux: always check the file label in selinux_kernel_read_file()
selinux: fix spelling error
Pull lsm updates from Paul Moore:
- Various minor updates to the LSM Rust bindings
Changes include marking trivial Rust bindings as inlines and comment
tweaks to better reflect the LSM hooks.
- Add LSM/SELinux access controls to io_uring_allowed()
Similar to the io_uring_disabled sysctl, add a LSM hook to
io_uring_allowed() to enable LSMs a simple way to enforce security
policy on the use of io_uring. This pull request includes SELinux
support for this new control using the io_uring/allowed permission.
- Remove an unused parameter from the security_perf_event_open() hook
The perf_event_attr struct parameter was not used by any currently
supported LSMs, remove it from the hook.
- Add an explicit MAINTAINERS entry for the credentials code
We've seen problems in the past where patches to the credentials code
sent by non-maintainers would often languish on the lists for
multiple months as there was no one explicitly tasked with the
responsibility of reviewing and/or merging credentials related code.
Considering that most of the code under security/ has a vested
interest in ensuring that the credentials code is well maintained,
I'm volunteering to look after the credentials code and Serge Hallyn
has also volunteered to step up as an official reviewer. I posted the
MAINTAINERS update as a RFC to LKML in hopes that someone else would
jump up with an "I'll do it!", but beyond Serge it was all crickets.
- Update Stephen Smalley's old email address to prevent confusion
This includes a corresponding update to the mailmap file.
* tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
mailmap: map Stephen Smalley's old email addresses
lsm: remove old email address for Stephen Smalley
MAINTAINERS: add Serge Hallyn as a credentials reviewer
MAINTAINERS: add an explicit credentials entry
cred,rust: mark Credential methods inline
lsm,rust: reword "destroy" -> "release" in SecurityCtx
lsm,rust: mark SecurityCtx methods inline
perf: Remove unnecessary parameter of security check
lsm: fix a missing security_uring_allowed() prototype
io_uring,lsm,selinux: add LSM hooks for io_uring_setup()
io_uring: refactor io_uring_allowed()
Pull thermal control updates from Rafael Wysocki:
"These include one thermal core fix for an issue leading to a NULL
pointer dereference, a similar fix for the int340x thermal driver
(even though the issue may not actually occur in practice in this
particular case), and a bunch of cleanups, mostly related to replacing
kzalloc() with kcalloc() where applicable.
Summary:
- Delay exposing thermal zone sysfs interface to prevent user space
from accessing thermal zones that have not been completely
initialized yet (Lucas De Marchi)
- Check a pointer against NULL early in int3402_thermal_probe() to
avoid a potential NULL pointer dereference (Chenyuan Yang)
- Use kcalloc() instead of kzalloc() in some places in the thermal
control subsystem (Lukasz Luba, Ethan Carter Edwards)
- Fix a spelling mistake in a comment in the thermal core (Colin Ian
King)
- Clean up variable initialization in int340x_thermal_zone_add()
(Christophe JAILLET)"
* tag 'thermal-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: Add NULL check for adev
thermal: core: Delay exposing sysfs interface
thermal: core: Fix spelling mistake "Occurences" -> "Occurrences"
thermal: intel: Clean up zone_trips[] initialization in int340x_thermal_zone_add()
thermal: hisi: Use kcalloc() instead of kzalloc() with multiplication
thermal: int340x: Use kcalloc() instead of kzalloc() with multiplication
thermal: k3_j72xx_bandgap: Use kcalloc() instead of kzalloc()
thermal/of: Use kcalloc() instead of kzalloc() with multiplication
thermal/debugfs: replace kzalloc() with kcalloc() in thermal_debug_tz_add()
Pull power management updates from Rafael Wysocki:
"These are dominated by cpufreq updates which in turn are dominated by
updates related to boost support in the core and drivers and
amd-pstate driver optimizations.
Apart from the above, there are some cpuidle updates including a
rework of the most recent idle intervals handling in the venerable
menu governor that leads to significant improvements in some
performance benchmarks, as the governor is now more likely to predict
a shorter idle duration in some cases, and there are updates of the
core device power management code, mostly related to system suspend
and resume, that should help to avoid potential issues arising when
the drivers of devices depending on one another want to use different
optimizations.
There is also a usual collection of assorted fixes and cleanups,
including removal of some unused code.
Specifics:
- Manage sysfs attributes and boost frequencies efficiently from
cpufreq core to reduce boilerplate code in drivers (Viresh Kumar)
- Minor cleanups to cpufreq drivers (Aaron Kling, Benjamin Schneider,
Dhananjay Ugwekar, Imran Shaik, zuoqian)
- Migrate some cpufreq drivers to using for_each_present_cpu() (Jacky
Bai)
- cpufreq-qcom-hw DT binding fixes (Krzysztof Kozlowski)
- Use str_enable_disable() helper in cpufreq_online() (Lifeng Zheng)
- Optimize the amd-pstate driver to avoid cases where call paths end
up calling the same writes multiple times and needlessly caching
variables through code reorganization, locking overhaul and tracing
adjustments (Mario Limonciello, Dhananjay Ugwekar)
- Make it possible to avoid enabling capacity-aware scheduling (CAS)
in the intel_pstate driver and relocate a check for out-of-band
(OOB) platform handling in it to make it detect OOB before checking
HWP availability (Rafael Wysocki)
- Fix dbs_update() to avoid inadvertent conversions of negative
integer values to unsigned int which causes CPU frequency selection
to be inaccurate in some cases when the "conservative" cpufreq
governor is in use (Jie Zhan)
- Update the handling of the most recent idle intervals in the menu
cpuidle governor to prevent useful information from being discarded
by it in some cases and improve the prediction accuracy (Rafael
Wysocki)
- Make it possible to tell the intel_idle driver to ignore its
built-in table of idle states for the given processor, clean up the
handling of auto-demotion disabling on Baytrail and Cherrytrail
chips in it, and update its MAINTAINERS entry (David Arcari, Artem
Bityutskiy, Rafael Wysocki)
- Make some cpuidle drivers use for_each_present_cpu() instead of
for_each_possible_cpu() during initialization to avoid issues
occurring when nosmp or maxcpus=0 are used (Jacky Bai)
- Clean up the Energy Model handling code somewhat (Rafael Wysocki)
- Use kfree_rcu() to simplify the handling of runtime Energy Model
updates (Li RongQing)
- Add an entry for the Energy Model framework to MAINTAINERS as
properly maintained (Lukasz Luba)
- Address RCU-related sparse warnings in the Energy Model code
(Rafael Wysocki)
- Remove ENERGY_MODEL dependency on SMP and allow it to be selected
when DEVFREQ is set without CPUFREQ so it can be used on a wider
range of systems (Jeson Gao)
- Unify error handling during runtime suspend and runtime resume in
the core to help drivers to implement more consistent runtime PM
error handling (Rafael Wysocki)
- Drop a redundant check from pm_runtime_force_resume() and rearrange
documentation related to __pm_runtime_disable() (Rafael Wysocki)
- Rework the handling of the "smart suspend" driver flag in the PM
core to avoid issues hat may occur when drivers using it depend on
some other drivers and clean up the related PM core code (Rafael
Wysocki, Colin Ian King)
- Fix the handling of devices with the power.direct_complete flag set
if device_suspend() returns an error for at least one device to
avoid situations in which some of them may not be resumed (Rafael
Wysocki)
- Use mutex_trylock() in hibernate_compressor_param_set() to avoid a
possible deadlock that may occur if the "compressor" hibernation
module parameter is accessed during the registration of a new
ieee80211 device (Lizhi Xu)
- Suppress sleeping parent warning in device_pm_add() in the case
when new children are added under a device with the
power.direct_complete set after it has been processed by
device_resume() (Xu Yang)
- Remove needless return in three void functions related to system
wakeup (Zijun Hu)
- Replace deprecated kmap_atomic() with kmap_local_page() in the
hibernation core code (David Reaver)
- Remove unused helper functions related to system sleep (David Alan
Gilbert)
- Clean up s2idle_enter() so it does not lock and unlock CPU offline
in vain and update comments in it (Ulf Hansson)
- Clean up broken white space in dpm_wait_for_children() (Geert
Uytterhoeven)
- Update the cpupower utility to fix lib version-ing in it and memory
leaks in error legs, remove hard-coded values, and implement CPU
physical core querying (Thomas Renninger, John B. Wyatt IV, Shuah
Khan, Yiwei Lin, Zhongqiu Han)"
* tag 'pm-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (139 commits)
PM: sleep: Fix bit masking operation
dt-bindings: cpufreq: cpufreq-qcom-hw: Narrow properties on SDX75, SA8775p and SM8650
dt-bindings: cpufreq: cpufreq-qcom-hw: Drop redundant minItems:1
dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing constraint for interrupt-names
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCS8300 compatible
cpufreq: Init cpufreq only for present CPUs
PM: sleep: Fix handling devices with direct_complete set on errors
cpuidle: Init cpuidle only for present CPUs
PM: clk: Remove unused pm_clk_remove()
PM: sleep: core: Fix indentation in dpm_wait_for_children()
PM: s2idle: Extend comment in s2idle_enter()
PM: s2idle: Drop redundant locks when entering s2idle
PM: sleep: Remove unused pm_generic_ wrappers
cpufreq: tegra186: Share policy per cluster
cpupower: Make lib versioning scheme more obvious and fix version link
PM: EM: Rework the depends on for CONFIG_ENERGY_MODEL
PM: EM: Address RCU-related sparse warnings
cpupower: Implement CPU physical core querying
pm: cpupower: remove hard-coded topology depth values
pm: cpupower: Fix cmd_monitor() error legs to free cpu_topology
...
Pull ACPI updates from Rafael Wysocki:
"From the functional perspective, the most significant changes here are
the ACPI fan driver update allowing it to handle fans with
fine-grained state checking supported, but without fine-grained
control, and the ACPI button driver update making it subscribe to
system event notifications (in addition to device notifications) which
on some systems is requisite for waking up the system from sleep.
The rest is fixes and cleanups including removal of some dead code.
Specifics:
- Use the str_on_off() helper function instead of hard-coded strings
in the ACPI power resources handling code (Thorsten Blum)
- Add fan speed reporting for ACPI fans that have _FST, but otherwise
do not support the entire ACPI 4 fan interface (Joshua Grisham)
- Fix a stale comment regarding trip points in acpi_thermal_add()
that diverged from the commented code after removing _CRT
evaluation from acpi_thermal_get_trip_points() (xueqin Luo)
- Make ACPI button driver also subscribe to system events (Mario
Limonciello)
- Use the str_yes_no() helper function instead of hard-coded strings
in the ACPI backlight (video) driver (Thorsten Blum)
- Add a missing header file include to the x86 arch CPPC code (Mario
Limonciello)
- Rework the sysfs attributes implementation in the ACPI
platform-profile driver and improve the unregistration code in it
(Nathan Chancellor, Kurt Borja)
- Prevent the ACPI HED driver from being built as a module and change
its initcall level to subsys_initcall to avoid initialization
ordering issues related to it (Xiaofei Tan)
- Update a maintainer email address in the ACPI PMIC entry in
MAINTAINERS (Mika Westerberg)
- Address a GCC 15's -Wunterminated-string-initialization warning in
the core PNP subsystem code and remove some dead code from it (Kees
Cook, David Alan Gilbert)"
* tag 'acpi-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PNP: Expand length of fixup id string
PNP: Remove prehistoric deadcode
ACPI: button: Install notifier for system events as well
ACPI: fan: Add fan speed reporting for fans with only _FST
ACPI: HED: Always initialize before evged
x86/ACPI: CPPC: Add missing include
ACPI: video: Use str_yes_no() helper in acpi_video_bus_add()
ACPI: platform_profile: Improve platform_profile_unregister()
ACPI: platform-profile: Fix CFI violation when accessing sysfs files
ACPI: power: Use str_on_off() helper function
ACPI: thermal: Fix stale comment regarding trip points
MAINTAINERS: Use my kernel.org address for ACPI PMIC work
