The Comedi "comedi_8254.h" header file is included by various Comedi
drivers with timer/counters based on the 8254 chip. The drivers do not
compile cleanly if this header file is included first. It uses pointers
to the `struct comedi_device`, `struct comedi_subdevice`, and `struct
comedi_insn` structures in various function prototypes, so declare those
as incomplete types. It use the `bool` type, so include
<linux/types.h>. It also uses the `__iomem` tag, but that seems to be
taken care of indirectly by including <linux/types.h>.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Comedi "addi_watchdog.h" header doesn't use anything form
"comedidev.h" apart from `struct comedi_subdevice`, which it only uses
to construct a corresponding pointer type within the parameter list of a
function prototype. Just declare the structure type incompletely and
don't bother including the header file.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use braces when the single statement following an `if` (or `else`)
spans more than one line (including any preceding comments).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Comedi "amplc_dio200.h" header file included by drivers for Amplicon
DIO200 series cards does not compile cleanly when it is the first header
included by the ".c" file. It uses `struct comedi_device *` in the
parameter lists of some function prototypes, so just declare `struct
comedi_device` as an incomplete type. It also uses `bool`, so include
<linux/types.h> to declare it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Comedi "8255" module is both a standalone Comedi device driver
module for simple devices with one or more 8255 "Programmable Peripheral
Interface" chips at known I/O base addresses (configured at run-time),
and a helper module to configure a 8255-based digital I/O subdevice for
other Comedi drivers.
Split the "8255 subdevice helper" functionality into a new module:
"comedi_8255", leaving the standalone 8255 Comedi driver in the "8255"
module.
The Comedi "detach" routine of the standalone "8255" driver needs to
retrieve the I/O base address passed to the "comedi_8255" module to set
up each subdevice in order to release the I/O port regions it requested
in its "attach" routine. The "comedi_8255" module stores it in a
"subdevice private" data structure that is no longer known to the "8255"
module, so add a new, exported function `subdev_8255_regbase()` to
retrieve it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several Comedi driver modules call `subdev_8255_init()` or
`subdev_8255_mm_init()` to set up a digital I/O subdevice based on the
"8255" chip. One of the parameters to these functions is an optional
pointer to an I/O callback function to perform the actual register
accesses (an internal default callback function is used if NULL).
The kerneldoc for `subdev_8255_init()` and `subdev_8255_mm_init()`
describe the prototype of the optional I/O callback function
incorrectly (my fault), adding a non-existent parameter of type `struct
comedi_subdevice *`. Fix the kerneldoc. Also add parameter names to
the callback function pointer type wherever it occurs to make the usage
clearer.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Comedi "8255.h" header doesn't use anything from "comedidev.h" apart
from `struct comedi_device` and `struct comedi_subdevice`, which are
only used to construct corresponding pointer types within the parameter
lists of function prototypes. Just declare those structure types
incompletely and don't bother including "comedidev.h".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Comedi "8255" driver does not clean up properly on failure. It can
leave requested I/O port regions unreleased. Specifically, the Comedi
"attach" handler (`dev_8255_attach()`) requests a specified I/O port
region before calling `subdev_8255_init()` to set up the subdevice. If
that fails, the "attach" handler returns an error and the Comedi core
will call the "detach" handler (`dev_8255_detach()`) to clean up. The
"detach" handler is responsible for releasing the I/O port regions
successfully requested by the "attach" handler. Unfortunately, it is
unable to obtain the base address of the region if the call to
`subdev_8255_init()` failed.
Fix the I/O region leak by releasing the region in the "attach" handler
directly if the call to `subdev_8255_init()` fails.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
check return value of kmalloc before accessing the memory pointer and
return -ENOMEM if allocation fails.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A recent patch to simplify the lustre large memory allocation
causes new warnings as an unintended side-effect:
lustre/lov/lov_request.c: In function 'lov_finish_set':
lustre/lov/lov_request.c:78:7: warning: unused variable 'len' [-Wunused-variable]
int len = set->set_oabufs * sizeof(*set->set_pga);
^
lustre/obdclass/acl.c: In function 'lustre_ext_acl_xattr_reduce_space':
lustre/obdclass/acl.c:123:6: warning: unused variable 'old_size' [-Wunused-variable]
int old_size = CFS_ACL_XATTR_SIZE(old_count, ext_acl_xattr);
^
The reason is that the 'size' argument to OBD_FREE_LARGE()
is never needed, which was previously hidden by the extra
abstractions.
This avoids the warnings by adding a cast to void, to tell
the compiler that the argument is intentionally unused.
A better fix is probably to remove the entire set of allocation
macros and open-code the normal kernel interface calls.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 99d56ff7c1 ("staging/lustre: Always try kmalloc first for OBD_ALLOC_LARGE")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LNET_MUTEX_LOCK and LNET_MUTEX_UNLOCK are verbose wrappers to mutex_lock and
mutex_unlock. Get rid of these.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unify spacing in variable declarations, and align indentation in headers.
General whitespace cleanups.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unify variable declarations to use a single space. Also include several
miscellaneous whitespace cleanups, particularly in socklnd.h.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unify variable declarations to use a single whitespace. Also line up
declarations and comments in o2iblnd.h.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LNetSetAsync() returns 0, and is never called. Doesn't exist in the Intel
tree, either. Remove it.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unify variable declarations to use a single space, and any other obvious
spacing flaws.
Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
smatch highlighted a wrongly indented bit of code that almost
hides the extra assignment.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In __l_wait_event the condition could be a complicated function that does
allocations and other potentialy blocking activities, so it sohuld
not be called in a task state other than RUNNABLE
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
change cast to __le16 to fix the following warning:
drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c:1488:20: warning: cast to restricted __le16
Signed-off-by: Juston Li <juston.h.li@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable pHalData is initialized twice in this same function with
same value.So removing one of them.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use roundup_pow_of_two() and drop the private cfs_power2_roundup()
implementation.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove bunch of duplicate helpers from libcfs.h that are guaranteed to
be present.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux requires a GNU C compatible compiler so drop a pointless define.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
check the return value of kzalloc before accessing the memory pointer
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl warning:
WARNING: else is not generally useful after a break or return
+ return result;
+ } else {
Signed-off-by: Ankit Garg <kerneldvlper@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NL80211_IFTYPE_MAX represents the largest interface type number defined,
so declaring the array with that size will actually leave out the last
interface.
This causes invalid memory access whenever this array is used, which starts
happening at boot.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver version is meaningless, and in particular does not
have to be passed from the Makefile. This removes the macros,
but leaves the behavior of printing the 10.2 version untouched
for the moment.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The wilc_thread code is a very thin wrapper around kthread,
so just remove it and use kthread directly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For code that is integrated into mainline Linux, checks for
the OS platform make no sense, because we know that we
are on Linux.
This removes all checks and the associated dead code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For code that is integrated into mainline Linux, checks for
the kernel version make no sense, because we know which version
we are compiling against.
This removes all checks and the associated dead code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The newly added wilc1000 driver lacks several Kconfig dependencies,
resulting in a multitude of randconfig build errors, e.g.:
drivers/built-in.o: In function `WILC_WFI_mgmt_tx_cancel_wait':
binder.c:(.text+0x12bd28): undefined reference to `cfg80211_remain_on_channel_expired'
drivers/built-in.o: In function `WILC_WFI_CfgSetChannel':
binder.c:(.text+0x12c9d8): undefined reference to `ieee80211_frequency_to_channel'
drivers/built-in.o: In function `WILC_WFI_CfgAlloc':
binder.c:(.text+0x132530): undefined reference to `wiphy_new_nm'
drivers/built-in.o: In function `wilc_netdev_init':
binder.c:(.text+0x1356d0): undefined reference to `register_inetaddr_notifier'
drivers/built-in.o: In function `linux_spi_init':
binder.c:(.text+0x210a68): undefined reference to `spi_register_driver'
This change ensures that we always have at least one of SPI or MMC
enabled, and are only able to pick an interface that works. It also
adds all the missing dependencies for networking infrastructure
(cfg80211, wext, and ipv4).
In order to make it readable, I also took the liberty of re-indenting
the Kconfig file to the normal conventions.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The wilc1000 driver uses definitions such as DEBUG_LEVEL, DEBUG,
and PRINT_INFO. This causes compile errors on S390 which has similar
definitions in its core code. Disable the driver for S390 instead
of giving the non-standard messaging code credit by trying to fix it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix:
drivers/staging/wilc1000/linux_wlan.c:18:22: fatal error:
asm/gpio.h: No such file or directory
Not every architecture has asm/gpio.h. Include linux/gpio.h instead.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver is for the wilc1000 which is a single chip IEEE 802.11
b/g/n device.
The driver works together with cfg80211, which is the kernel side of
configuration management for wireless devices because the wilc1000
chipset is fullmac where the MLME is managed in hardware.
The driver worked from kernel version 2.6.38 and being now ported
to several others since then.
A TODO file is included as well in this commit.
Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
Signed-off-by: Rachel Kim <rachel.kim@atmel.com>
Signed-off-by: Dean Lee <dean.lee@atmel.com>
Signed-off-by: Chris Park <chris.park@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
