RZ/G2L General PWM Timer (GPT) composed of 8 channels with 32-bit timer
(GPT32E). It supports the following functions
* 32 bits x 8 channels
* Up-counting or down-counting (saw waves) or up/down-counting
(triangle waves) for each counter.
* Clock sources independently selectable for each channel
* Two I/O pins per channel
* Two output compare/input capture registers per channel
* For the two output compare/input capture registers of each channel,
four registers are provided as buffer registers and are capable of
operating as comparison registers when buffering is not in use.
* In output compare operation, buffer switching can be at crests or
troughs, enabling the generation of laterally asymmetric PWM waveforms.
* Registers for setting up frame cycles in each channel (with capability
for generating interrupts at overflow or underflow)
* Generation of dead times in PWM operation
* Synchronous starting, stopping and clearing counters for arbitrary
channels
* Starting, stopping, clearing and up/down counters in response to input
level comparison
* Starting, clearing, stopping and up/down counters in response to a
maximum of four external triggers
* Output pin disable function by dead time error and detected
short-circuits between output pins
* A/D converter start triggers can be generated (GPT32E0 to GPT32E3)
* Enables the noise filter for input capture and external trigger
operation
Add basic pwm support for RZ/G2L GPT driver by creating separate
logical channels for each IOs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250226144531.176819-4-biju.das.jz@bp.renesas.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Newer meson PWM IPs support constant and polarity bits. Support them to
correctly implement constant and inverted output levels.
Using constant bit allows to have truly stable low or high output level.
Since hi and low regs internally increment its values by 1 just writing
zero to any of them gives 1 clock count impulse. If constant bit is set
zero value in hi and low regs is not incremented.
Using polarity bit instead of swapping hi and low reg values allows to
correctly identify inversion in .get_state().
Signed-off-by: George Stark <gnstark@salutedevices.com>
Link: https://lore.kernel.org/r/20241119125318.3492261-3-gnstark@salutedevices.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Pull erofs fixes from Gao Xiang:
- Properly handle errors when file-backed I/O fails
- Fix compilation issues on ARM platform (arm-linux-gnueabi)
- Fix parsing of encoded extents
- Minor cleanup
* tag 'erofs-for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: remove duplicate code
erofs: fix encoded extents handling
erofs: add __packed annotation to union(__le16..)
erofs: set error to bio if file-backed IO fails
Pull ext4 fixes from Ted Ts'o:
"A few more miscellaneous ext4 bug fixes and cleanups including some
syzbot failures and fixing a stale file handing refeencing an inode
previously used as a regular file, but which has been deleted and
reused as an ea_inode would result in ext4 erroneously considering
this a case of fs corruption"
* tag 'ext4_for_linus-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off-by-one error in do_split
ext4: make block validity check resistent to sb bh corruption
ext4: avoid -Wflex-array-member-not-at-end warning
Documentation: ext4: Add fields to ext4_super_block documentation
ext4: don't treat fhandle lookup of ea_inode as FS corruption
Pull memblock fix from Mike Rapoport:
"Fix build of memblock test.
Add missing stubs for mutex and free_reserved_area() to memblock
tests"
* tag 'fixes-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: Fix mutex related build error
Syzkaller detected a use-after-free issue in ext4_insert_dentry that was
caused by out-of-bounds access due to incorrect splitting in do_split.
BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847
CPU: 0 UID: 0 PID: 5847 Comm: syz-executor335 Not tainted 6.12.0-rc6-syzkaller-00318-ga9cda7c0ffed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
add_dirent_to_buf+0x3d9/0x750 fs/ext4/namei.c:2154
make_indexed_dir+0xf98/0x1600 fs/ext4/namei.c:2351
ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2455
ext4_add_nondir+0x8d/0x290 fs/ext4/namei.c:2796
ext4_symlink+0x920/0xb50 fs/ext4/namei.c:3431
vfs_symlink+0x137/0x2e0 fs/namei.c:4615
do_symlinkat+0x222/0x3a0 fs/namei.c:4641
__do_sys_symlink fs/namei.c:4662 [inline]
__se_sys_symlink fs/namei.c:4660 [inline]
__x64_sys_symlink+0x7a/0x90 fs/namei.c:4660
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
The following loop is located right above 'if' statement.
for (i = count-1; i >= 0; i--) {
/* is more than half of this entry in 2nd half of the block? */
if (size + map[i].size/2 > blocksize/2)
break;
size += map[i].size;
move++;
}
'i' in this case could go down to -1, in which case sum of active entries
wouldn't exceed half the block size, but previous behaviour would also do
split in half if sum would exceed at the very last block, which in case of
having too many long name files in a single block could lead to
out-of-bounds access and following use-after-free.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Fixes: 5872331b3d ("ext4: fix potential negative array index in do_split()")
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250404082804.2567-3-a.sadovnikov@ispras.ru
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Block validity checks need to be skipped in case they are called
for journal blocks since they are part of system's protected
zone.
Currently, this is done by checking inode->ino against
sbi->s_es->s_journal_inum, which is a direct read from the ext4 sb
buffer head. If someone modifies this underneath us then the
s_journal_inum field might get corrupted. To prevent against this,
change the check to directly compare the inode with journal->j_inode.
**Slight change in behavior**: During journal init path,
check_block_validity etc might be called for journal inode when
sbi->s_journal is not set yet. In this case we now proceed with
ext4_inode_block_valid() instead of returning early. Since systems zones
have not been set yet, it is okay to proceed so we can perform basic
checks on the blocks.
Suggested-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/0c06bc9ebfcd6ccfed84a36e79147bf45ff5adc1.1743142920.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
fs/ext4/mballoc.c:3041:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/Z-SF97N3AxcIMlSi@kspp
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Documentation and implementation of the ext4 super block have
slightly diverged: Padding has been removed in order to make room for
new fields that are still missing in the documentation.
Add the new fields s_encryption_level, s_first_error_errorcode,
s_last_error_errorcode to the documentation of the ext4 super block.
Fixes: f542fbe8d5 ("ext4 crypto: reserve codepoints used by the ext4 encryption feature")
Fixes: 878520ac45 ("ext4: save the error code which triggered an ext4_error() in the superblock")
Signed-off-by: Tom Vierjahn <tom.vierjahn@acm.org>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20250324221004.5268-1-tom.vierjahn@acm.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull tracing fixes from Steven Rostedt:
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not
defined. Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s"
for dynamic size strings even though the user space exported
arguments had only __get_str() macro that provided just a nul
terminated string. This was fixed so that user space could parse this
properly.
But the reason that it had "%.*s" was because internally it provided
the maximum size of the string as one of the arguments. The fix that
replaced "%.*s" with "%s" caused the trace output (when the kernel
reads the event) to write "(efault)" as it would now read the length
of the string as "%s".
As the string provided is always nul terminated, there's no reason
for the internal code to use "%.*s" anyway. Just remove the length
argument to match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a
way to have a single ftrace_ops registered with ftrace to determine
what functions will call the ftrace_ops callback. More than one user
of function graph can register a ftrace_ops with it. The function
graph infrastructure will then add this ftrace_ops as a subops with
the main ftrace_ops it registers with ftrace. This is because the
functions will always call the function graph callback which in turn
calls the subops ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will
update the main ftrace_ops hash to include the functions it wants.
This is the logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" where
all the functions in the filter_hash but not in the notrace_hash are
attached by ftrace. The original logic would have the main ftrace_ops
filter_hash be a union of all the subops filter_hashes and the main
notrace_hash would be a intersect of all the subops filter hashes.
But this was incorrect because the notrace hash depends on the
filter_hash it is associated to and not the union of all
filter_hashes.
Instead, when a subops is added, just include all the functions of
the subops hash that are in its filter_hash but not in its
notrace_hash. The main subops hash should not use its notrace hash,
unless all of its subops hashes have an empty filter_hash (which
means to attach to all functions), and then, and only then, the main
ftrace_ops notrace hash can be the intersect of all the subops
hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and
called print_graph_retval() and also printed a newline. The
print_graph_retval() also prints a newline which caused blank lines
to be printed in the function graph tracer when retval was added.
This caused one of the selftests to fail if retvals were enabled.
Instead remove the new line output from print_graph_retval() and have
the callers always print the new line so that it doesn't have to do
special logic if it calls print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the
link list it references the next entry, which is the list head and
causes an out-of-bound memory access.
* tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix out-of-bound memory access in rv_is_container_monitor()
ftrace: Do not have print_graph_retval() add a newline
tracing/selftest: Add test to better test subops filtering of function graph
ftrace: Fix accounting of subop hashes
ftrace: Properly merge notrace hashes
tracing: Do not add length to print format in synthetic events
tracing: Hide get_vm_area() from MMUless builds
Pull bpf fixes from Alexei Starovoitov:
- Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi):
- Make res_spin_lock test less verbose, since it was spamming BPF
CI on failure, and make the check for AA deadlock stronger
- Fix rebasing mistake and use architecture provided
res_smp_cond_load_acquire
- Convert BPF maps (queue_stack and ringbuf) to resilient spinlock
to address long standing syzbot reports
- Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF
offsets works when skb is fragmeneted (Willem de Bruijn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Convert ringbuf map to rqspinlock
bpf: Convert queue_stack map to rqspinlock
bpf: Use architecture provided res_smp_cond_load_acquire
selftests/bpf: Make res_spin_lock AA test condition stronger
selftests/net: test sk_filter support for SKF_NET_OFF on frags
bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
selftests/bpf: Make res_spin_lock test less verbose
When rv_is_container_monitor() is called on the last monitor in
rv_monitors_list, KASAN yells:
BUG: KASAN: global-out-of-bounds in rv_is_container_monitor+0x101/0x110
Read of size 8 at addr ffffffff97c7c798 by task setup/221
The buggy address belongs to the variable:
rv_monitors_list+0x18/0x40
This is due to list_next_entry() is called on the last entry in the list.
It wraps around to the first list_head, and the first list_head is not
embedded in struct rv_monitor_def.
Fix it by checking if the monitor is last in the list.
Cc: stable@vger.kernel.org
Cc: Gabriele Monaco <gmonaco@redhat.com>
Fixes: cb85c660fc ("rv: Add option for nested monitors and include sched")
Link: https://lore.kernel.org/e85b5eeb7228bfc23b8d7d4ab5411472c54ae91b.1744355018.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The retval and retaddr options for function_graph tracer will add a
comment at the end of a function for both leaf and non leaf functions that
looks like:
__wake_up_common(); /* ret=0x1 */
} /* pick_next_task_fair ret=0x0 */
The function print_graph_retval() adds a newline after the "*/". But if
that's not called, the caller function needs to make sure there's a
newline added.
This is confusing and when the function parameters code was added, it
added a newline even when calling print_graph_retval() as the fact that
the print_graph_retval() function prints a newline isn't obvious.
This caused an extra newline to be printed and that made it fail the
selftests when the retval option was set, as the selftests were not
expecting blank lines being injected into the trace.
Instead of having print_graph_retval() print a newline, just have the
caller always print the newline regardless if it calls print_graph_retval()
or not. This not only fixes this bug, but it also simplifies the code.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250411133015.015ca393@gandalf.local.home
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/ccc40f2b-4b9e-4abd-8daf-d22fce2a86f0@sirena.org.uk/
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull pwm fixes from Uwe Kleine-König:
"A set of fixes for pwm core and various drivers
The first three patches handle clk_get_rate() returning 0 (which might
happen for example if the CCF is disabled). The first of these was
found because this triggered a warning with clang, the two others by
looking for similar issues in other drivers.
The remaining three fixes address issues in the new waveform pwm API.
Now that I worked on this a bit more, the finer details and corner
cases are better understood and the code is fixed accordingly"
* tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was rounded up
pwm: stm32: Search an appropriate duty_cycle if period cannot be modified
pwm: Let pwm_set_waveform() succeed even if lowlevel driver rounded up
pwm: fsl-ftm: Handle clk_get_rate() returning 0
pwm: rcar: Improve register calculation
pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()
Pull smb client fixes from Steve French:
- Fix multichannel decryption UAF
- Fix regression mounting to onedrive shares
- Fix missing mount option check for posix vs. noposix
- Fix version field in WSL symlinks
- Three minor cleanup to reparse point handling
- SMB1 fix for WSL special files
- SMB1 Kerberos fix
- Add SMB3 defines for two new FS attributes
* tag 'v6.15-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Add defines for two new FileSystemAttributes
cifs: Fix querying of WSL CHR and BLK reparse points over SMB1
cifs: Split parse_reparse_point callback to functions: get buffer and parse buffer
cifs: Improve handling of name surrogate reparse points in reparse.c
cifs: Remove explicit handling of IO_REPARSE_TAG_MOUNT_POINT in inode.c
cifs: Fix encoding of SMB1 Session Setup Kerberos Request in non-UNICODE mode
smb: client: fix UAF in decryption with multichannel
cifs: Fix support for WSL-style symlinks
smb311 client: fix missing tcon check when mounting with linux/posix extensions
cifs: Ensure that all non-client-specific reparse points are processed by the server
Pull pci fix from Bjorn Helgaas:
- Run quirk_huawei_pcie_sva() before arm_smmu_probe_device(), which
depends on the quirk, to avoid IOMMU initialization failures
(Zhangfei Gao)
* tag 'pci-v6.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Run quirk_huawei_pcie_sva() before arm_smmu_probe_device()
The function graph infrastructure uses ftrace to hook to functions. It has
a single ftrace_ops to manage all the users of function graph. Each
individual user (tracing, bpf, fprobes, etc) has its own ftrace_ops to
track the functions it will have its callback called from. These
ftrace_ops are "subops" to the main ftrace_ops of the function graph
infrastructure.
Each ftrace_ops has a filter_hash and a notrace_hash that is defined as:
Only trace functions that are in the filter_hash but not in the
notrace_hash.
If the filter_hash is empty, it means to trace all functions.
If the notrace_hash is empty, it means do not disable any function.
The function graph main ftrace_ops needs to be a superset containing all
the functions to be traced by all the subops it has. The algorithm to
perform this merge was incorrect.
When the first subops was added to the main ops, it simply made the main
ops a copy of the subops (same filter_hash and notrace_hash).
When a second ops was added, it joined the new subops filter_hash with the
main ops filter_hash as a union of the two sets. The intersect between the
new subops notrace_hash and the main ops notrace_hash was created as the
new notrace_hash of the main ops.
The issue here is that it would then start tracing functions than no
subops were tracing. For example if you had two subops that had:
subops 1:
filter_hash = '*sched*' # trace all functions with "sched" in it
notrace_hash = '*time*' # except do not trace functions with "time"
subops 2:
filter_hash = '*lock*' # trace all functions with "lock" in it
notrace_hash = '*clock*' # except do not trace functions with "clock"
The intersect of '*time*' functions with '*clock*' functions could be the
empty set. That means the main ops will be tracing all functions with
'*time*' and all "*clock*" in it!
Instead, modify the algorithm to be a bit simpler and correct.
First, when adding a new subops, even if it's the first one, do not add
the notrace_hash if the filter_hash is not empty. Instead, just add the
functions that are in the filter_hash of the subops but not in the
notrace_hash of the subops into the main ops filter_hash. There's no
reason to add anything to the main ops notrace_hash.
The notrace_hash of the main ops should only be non empty iff all subops
filter_hashes are empty (meaning to trace all functions) and all subops
notrace_hashes include the same functions.
That is, the main ops notrace_hash is empty if any subops filter_hash is
non empty.
The main ops notrace_hash only has content in it if all subops
filter_hashes are empty, and the content are only functions that intersect
all the subops notrace_hashes. If any subops notrace_hash is empty, then
so is the main ops notrace_hash.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/20250409152720.216356767@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
quirk_huawei_pcie_sva() sets properties needed by arm_smmu_probe_device(),
but bcb81ac6ae ("iommu: Get DT/ACPI parsing into the proper probe path")
changed the iommu_probe_device() flow so arm_smmu_probe_device() is now
invoked before the quirk, leading to failures like this:
reg-dummy reg-dummy: late IOMMU probe at driver bind, something fishy here!
WARNING: CPU: 0 PID: 1 at drivers/iommu/iommu.c:449 __iommu_probe_device+0x140/0x570
RIP: 0010:__iommu_probe_device+0x140/0x570
The SR-IOV enumeration ordering changes like this:
pci_iov_add_virtfn
pci_device_add
pci_fixup_device(pci_fixup_header) <--
device_add
bus_notify
iommu_bus_notifier
+ iommu_probe_device
+ arm_smmu_probe_device
pci_bus_add_device
pci_fixup_device(pci_fixup_final) <--
device_attach
driver_probe_device
really_probe
pci_dma_configure
acpi_dma_configure_id
- iommu_probe_device
- arm_smmu_probe_device
The non-SR-IOV case is similar in that pci_device_add() is called from
pci_scan_single_device() in the generic enumeration path and
pci_bus_add_device() is called later, after all host bridges have been
enumerated.
Declare quirk_huawei_pcie_sva() as a header fixup to ensure that it happens
before arm_smmu_probe_device().
Fixes: bcb81ac6ae ("iommu: Get DT/ACPI parsing into the proper probe path")
Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/all/SJ1PR11MB61295DE21A1184AEE0786E25B9D22@SJ1PR11MB6129.namprd11.prod.outlook.com/
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
[bhelgaas: commit log, add failure info and reporter]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250317011352.5806-1-zhangfei.gao@linaro.org
Pull spi fixes from Mark Brown:
"A couple of cleanups for the error handling in the Freescale drivers"
* tag 'spi-fix-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl-spi: Remove redundant probe error message
spi: fsl-qspi: Fix double cleanup in probe error path
Pull ata fixes from Damien Le Moal:
- Fix missing error checks during controller probe in the sata_sx4
driver (Wentao)
- Fix missing error checks during controller probe in the pata_pxa
driver (Henry)
* tag 'ata-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: sata_sx4: Add error handling in pdc20621_i2c_read()
ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe()
Pull more block fixes from Jens Axboe:
"Apparently my internal clock was off, or perhaps it was just wishful
thinking, but I sent out block fixes yesterday as my brain assumed it
was Friday. Subsequently, that missed the NVMe fixes that should go
into this weeks release as well. Hence, here's a followup with those,
and another simple fix.
- NVMe pull request via Christoph:
- nvmet fc/fcloop refcounting fixes (Daniel Wagner)
- fix missed namespace/ANA scans (Hannes Reinecke)
- fix a use after free in the new TCP netns support (Kuniyuki
Iwashima)
- fix a NULL instead of false review in multipath (Uday Shankar)
- Use strscpy() for null_blk disk name copy"
* tag 'block-6.15-20250411' of git://git.kernel.dk/linux:
null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev()
nvmet-fc: put ref when assoc->del_work is already scheduled
nvmet-fc: take tgtport reference only once
nvmet-fc: update tgtport ref per assoc
nvmet-fc: inline nvmet_fc_free_hostport
nvmet-fc: inline nvmet_fc_delete_assoc
nvmet-fcloop: add ref counting to lport
nvmet-fcloop: replace kref with refcount
nvmet-fcloop: swap list_add_tail arguments
nvme-tcp: fix use-after-free of netns by kernel TCP socket.
nvme: multipath: fix return value of nvme_available_path
nvme: re-read ANA log page after ns scan completes
nvme: requeue namespace scan on missed AENs
Pull iommu fixes from Joerg Roedel:
- Fix two crashes, one in core code and a NULL-ptr dereference in the
Mediatek IOMMU driver
- Dma_ops cleanup fix for core code
- Two fixes for Intel VT-d driver:
- Fix posted MSI issue when users change cpu affinity
- Remove invalid set_dma_ops() call in the iommu driver
- Warning fix for Tegra IOMMU driver
- Suspend/Resume fix for Exynos IOMMU driver
- Probe failure fix for Renesas IOMMU driver
- Cosmetic fix
* tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()
iommu: remove unneeded semicolon
iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group
iommu/exynos: Fix suspend/resume with IDENTITY domain
iommu/ipmmu-vmsa: Register in a sensible order
iommu: Clear iommu-dma ops on cleanup
iommu/vt-d: Remove an unnecessary call set_dma_ops()
iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIs
iommu: Fix crash in report_iommu_fault()
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI button driver, add quirks
related to EC wakeups from suspend-to-idle and fix coding mistakes
related to the usage of sizeof() in the PPTT parser code:
Summary:
- Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario
Limonciello)
- Prevent ACPI button from sending spurions KEY_POWER events to user
space in some cases after a recent update (Mario Limonciello)
- Compute the size of a structure instead of the size of a pointer in
two places in the PPTT parser code (Jean-Marc Eurin)"
* tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls
ACPI: EC: Set ec_no_wakeup for Lenovo Go S
ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
Pull s390 updates from Heiko Carstens:
"Note that besides two bug fixes this includes three commits for IBM
z17, which was announced this week.
- Add IBM z17 bits:
- Setup elf_platform for new machine types
- Allow to compile the kernel with z17 optimizations
- Add new performance counters
- Fix mismatch between indicator bits and queue indexes in virtio CCW code
- Fix double free in pmu setup error path"
* tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Fix double free on error in cpumf_pmu_event_init()
s390/cpumf: Update CPU Measurement facility extended counter set support
s390: Allow to compile with z17 optimizations
s390: Add z17 elf platform
s390/virtio_ccw: Don't allocate/assign airqs for non-existing queues
Merge updates of the ACPI EC and button drivers for 6.15-rc2:
- Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario
Limonciello).
- Prevent ACPI button from sending spurions KEY_POWER events to user
space in some cases after a recent update (Mario Limonciello).
* acpi-ec:
ACPI: EC: Set ec_no_wakeup for Lenovo Go S
* acpi-button:
ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
blk_mq_alloc_disk() already zero-initializes the destination buffer,
making strscpy() sufficient for safely copying the disk's name. The
additional NUL-padding performed by strscpy_pad() is unnecessary.
If the destination buffer has a fixed length, strscpy() automatically
determines its size using sizeof() when the argument is omitted. This
makes the explicit size argument unnecessary.
The source string is also NUL-terminated and meets the __must_be_cstr()
requirement of strscpy().
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250410154727.883207-1-thorsten.blum@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
