Jiawen Wu says:
====================
Fix IRQ vectors
The interrupt vector order was adjusted by [1]commit 937d46ecc5 ("net:
wangxun: add ethtool_ops for channel number") in Linux-6.8. Because at
that time, the MISC interrupt acts as the parent interrupt in the GPIO
IRQ chip. When the number of Rx/Tx ring changes, the last MISC
interrupt must be reallocated. Then the GPIO interrupt controller would
be corrupted. So the initial plan was to adjust the sequence of the
interrupt vectors, let MISC interrupt to be the first one and do not
free it.
Later, irq_domain was introduced in [2]commit aefd013624 ("net: txgbe:
use irq_domain for interrupt controller") to avoid this problem.
However, the vector sequence adjustment was not reverted. So there is
still one problem that has been left unresolved.
Due to hardware limitations of NGBE, queue IRQs can only be requested
on vector 0 to 7. When the number of queues is set to the maximum 8,
the PCI IRQ vectors are allocated from 0 to 8. The vector 0 is used by
MISC interrupt, and althrough the vector 8 is used by queue interrupt,
it is unable to receive packets. This will cause some packets to be
dropped when RSS is enabled and they are assigned to queue 8.
This patch set fix the above problems.
[1] https://git.kernel.org/netdev/net-next/c/937d46ecc5f9
[2] https://git.kernel.org/netdev/net-next/c/aefd013624a1
====================
Link: https://patch.msgid.link/20250701063030.59340-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For NGBE devices, the queue number is limited to be 1 when SRIOV is
enabled. In this case, IRQ vector[0] is used for MISC and vector[1] is
used for queue, based on the previous patches. But for the hardware
design, the IRQ vector[1] must be allocated for use by the VF[6] when
the number of VFs is 7. So the IRQ vector[0] should be shared for PF
MISC and QUEUE interrupts.
+-----------+----------------------+
| Vector | Assigned To |
+-----------+----------------------+
| Vector 0 | PF MISC and QUEUE |
| Vector 1 | VF 6 |
| Vector 2 | VF 5 |
| Vector 3 | VF 4 |
| Vector 4 | VF 3 |
| Vector 5 | VF 2 |
| Vector 6 | VF 1 |
| Vector 7 | VF 0 |
+-----------+----------------------+
Minimize code modifications, only adjust the IRQ vector number for this
case.
Fixes: 877253d2cb ("net: ngbe: add sriov function support")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20250701063030.59340-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Due to hardware limitations of NGBE, queue IRQs can only be requested
on vector 0 to 7. When the number of queues is set to the maximum 8,
the PCI IRQ vectors are allocated from 0 to 8. The vector 0 is used by
MISC interrupt, and althrough the vector 8 is used by queue interrupt,
it is unable to receive packets. This will cause some packets to be
dropped when RSS is enabled and they are assigned to queue 8.
So revert the adjustment of the MISC IRQ location, to make it be the
last one in IRQ vectors.
Fixes: 937d46ecc5 ("net: wangxun: add ethtool_ops for channel number")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20250701063030.59340-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Laurent Vivier says:
====================
virtio: Fixes for TX ring sizing and resize error reporting
This patch series contains two fixes and a cleanup for the virtio subsystem.
The first patch fixes an error reporting bug in virtio_ring's
virtqueue_resize() function. Previously, errors from internal resize
helpers could be masked if the subsequent re-enabling of the virtqueue
succeeded. This patch restores the correct error propagation, ensuring that
callers of virtqueue_resize() are properly informed of underlying resize
failures.
The second patch does a cleanup of the use of '2+MAX_SKB_FRAGS'
The third patch addresses a reliability issue in virtio_net where the TX
ring size could be configured too small, potentially leading to
persistently stopped queues and degraded performance. It enforces a
minimum TX ring size to ensure there's always enough space for at least one
maximally-fragmented packet plus an additional slot.
====================
Link: https://patch.msgid.link/20250521092236.661410-1-lvivier@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The `tx_may_stop()` logic stops TX queues if free descriptors
(`sq->vq->num_free`) fall below the threshold of (`MAX_SKB_FRAGS` + 2).
If the total ring size (`ring_num`) is not strictly greater than this
value, queues can become persistently stopped or stop after minimal
use, severely degrading performance.
A single sk_buff transmission typically requires descriptors for:
- The virtio_net_hdr (1 descriptor)
- The sk_buff's linear data (head) (1 descriptor)
- Paged fragments (up to MAX_SKB_FRAGS descriptors)
This patch enforces that the TX ring size ('ring_num') must be strictly
greater than (MAX_SKB_FRAGS + 2). This ensures that the ring is
always large enough to hold at least one maximally-fragmented packet
plus at least one additional slot.
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250521092236.661410-4-lvivier@redhat.com
Tested-by: Lei Yang <leiyang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The virtqueue_resize() function was not correctly propagating error codes
from its internal resize helper functions, specifically
virtqueue_resize_packet() and virtqueue_resize_split(). If these helpers
returned an error, but the subsequent call to virtqueue_enable_after_reset()
succeeded, the original error from the resize operation would be masked.
Consequently, virtqueue_resize() could incorrectly report success to its
caller despite an underlying resize failure.
This change restores the original code behavior:
if (vdev->config->enable_vq_after_reset(_vq))
return -EBUSY;
return err;
Fix: commit ad48d53b5b ("virtio_ring: separate the logic of reset/enable from virtqueue_resize")
Cc: xuanzhuo@linux.alibaba.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250521092236.661410-2-lvivier@redhat.com
Tested-by: Lei Yang <leiyang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Historically KVM hyp code saved the host's FPSIMD state into the hosts's
fpsimd_state memory, and so it was necessary to map this into the hyp
Stage-1 mappings before running a vCPU.
This is no longer necessary as of commits:
* fbc7e61195 ("KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state")
* 8eca7f6d51 ("KVM: arm64: Remove host FPSIMD saving for non-protected KVM")
Since those commits, we eagerly save the host's FPSIMD state before
calling into hyp to run a vCPU, and hyp code never reads nor writes the
host's fpsimd_state memory. There's no longer any need to map the host's
fpsimd_state memory into the hyp Stage-1, and kvm_arch_vcpu_run_map_fp()
is unnecessary but benign.
Remove kvm_arch_vcpu_run_map_fp(). Currently there is no code to perform
a corresponding unmap, and we never mapped the host's SVE or SME state
into the hyp Stage-1, so no other code needs to be removed.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Cc: kvmarm@lists.linux.dev
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20250619134817.4075340-1-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Booting an EL2 guest on a system only supporting a subset of the
possible page sizes leads to interesting situations.
For example, on a system that only supports 4kB and 64kB, and is
booted with a 4kB kernel, we end-up advertising 16kB support at
stage-2, which is pretty weird.
That's because we consider that any S2 bigger than our base granule
is fair game, irrespective of what the HW actually supports. While this
is not impossible to support (KVM would happily handle it), it is likely
to be confusing for the guest.
Add new checks that will verify that this granule size is actually
supported before publishing it to the guest.
Fixes: e7ef6ed458 ("KVM: arm64: Enforce NV limits on a per-idregs basis")
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In probe appletb_kbd_probe() a "struct appletb_kbd *kbd" is allocated
via devm_kzalloc() to store touch bar keyboard related data.
Later on if backlight_device_get_by_name() finds a backlight device
with name "appletb_backlight" a timer (kbd->inactivity_timer) is setup
with appletb_inactivity_timer() and the timer is armed to run after
appletb_tb_dim_timeout (60) seconds.
A use-after-free is triggered when failure occurs after the timer is
armed. This ultimately means probe failure occurs and as a result the
"struct appletb_kbd *kbd" which is device managed memory is freed.
After 60 seconds the timer will have expired and __run_timers will
attempt to access the timer (kbd->inactivity_timer) however the kdb
structure has been freed causing a use-after free.
[ 71.636938] ==================================================================
[ 71.637915] BUG: KASAN: slab-use-after-free in __run_timers+0x7ad/0x890
[ 71.637915] Write of size 8 at addr ffff8881178c5958 by task swapper/1/0
[ 71.637915]
[ 71.637915] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.16.0-rc2-00318-g739a6c93cc75-dirty #12 PREEMPT(voluntary)
[ 71.637915] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 71.637915] Call Trace:
[ 71.637915] <IRQ>
[ 71.637915] dump_stack_lvl+0x53/0x70
[ 71.637915] print_report+0xce/0x670
[ 71.637915] ? __run_timers+0x7ad/0x890
[ 71.637915] kasan_report+0xce/0x100
[ 71.637915] ? __run_timers+0x7ad/0x890
[ 71.637915] __run_timers+0x7ad/0x890
[ 71.637915] ? __pfx___run_timers+0x10/0x10
[ 71.637915] ? update_process_times+0xfc/0x190
[ 71.637915] ? __pfx_update_process_times+0x10/0x10
[ 71.637915] ? _raw_spin_lock_irq+0x80/0xe0
[ 71.637915] ? _raw_spin_lock_irq+0x80/0xe0
[ 71.637915] ? __pfx__raw_spin_lock_irq+0x10/0x10
[ 71.637915] run_timer_softirq+0x141/0x240
[ 71.637915] ? __pfx_run_timer_softirq+0x10/0x10
[ 71.637915] ? __pfx___hrtimer_run_queues+0x10/0x10
[ 71.637915] ? kvm_clock_get_cycles+0x18/0x30
[ 71.637915] ? ktime_get+0x60/0x140
[ 71.637915] handle_softirqs+0x1b8/0x5c0
[ 71.637915] ? __pfx_handle_softirqs+0x10/0x10
[ 71.637915] irq_exit_rcu+0xaf/0xe0
[ 71.637915] sysvec_apic_timer_interrupt+0x6c/0x80
[ 71.637915] </IRQ>
[ 71.637915]
[ 71.637915] Allocated by task 39:
[ 71.637915] kasan_save_stack+0x33/0x60
[ 71.637915] kasan_save_track+0x14/0x30
[ 71.637915] __kasan_kmalloc+0x8f/0xa0
[ 71.637915] __kmalloc_node_track_caller_noprof+0x195/0x420
[ 71.637915] devm_kmalloc+0x74/0x1e0
[ 71.637915] appletb_kbd_probe+0x37/0x3c0
[ 71.637915] hid_device_probe+0x2d1/0x680
[ 71.637915] really_probe+0x1c3/0x690
[ 71.637915] __driver_probe_device+0x247/0x300
[ 71.637915] driver_probe_device+0x49/0x210
[...]
[ 71.637915]
[ 71.637915] Freed by task 39:
[ 71.637915] kasan_save_stack+0x33/0x60
[ 71.637915] kasan_save_track+0x14/0x30
[ 71.637915] kasan_save_free_info+0x3b/0x60
[ 71.637915] __kasan_slab_free+0x37/0x50
[ 71.637915] kfree+0xcf/0x360
[ 71.637915] devres_release_group+0x1f8/0x3c0
[ 71.637915] hid_device_probe+0x315/0x680
[ 71.637915] really_probe+0x1c3/0x690
[ 71.637915] __driver_probe_device+0x247/0x300
[ 71.637915] driver_probe_device+0x49/0x210
[...]
The root cause of the issue is that the timer is not disarmed
on failure paths leading to it remaining active and accessing
freed memory. To fix this call timer_delete_sync() to deactivate
the timer.
Another small issue is that timer_delete_sync is called
unconditionally in appletb_kbd_remove(), fix this by checking
for a valid kbd->backlight_dev before calling timer_delete_sync.
Fixes: 93a0fc4894 ("HID: hid-appletb-kbd: add support for automatic brightness control while using the touchbar")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When calling buf_to_xdp, the len argument is the frame data's length
without virtio header's length (vi->hdr_len). We check that len with
xsk_pool_get_rx_frame_size() + vi->hdr_len
to ensure the provided len does not larger than the allocated chunk
size. The additional vi->hdr_len is because in virtnet_add_recvbuf_xsk,
we use part of XDP_PACKET_HEADROOM for virtio header and ask the vhost
to start placing data from
hard_start + XDP_PACKET_HEADROOM - vi->hdr_len
not
hard_start + XDP_PACKET_HEADROOM
But the first buffer has virtio_header, so the maximum frame's length in
the first buffer can only be
xsk_pool_get_rx_frame_size()
not
xsk_pool_get_rx_frame_size() + vi->hdr_len
like in the current check.
This commit adds an additional argument to buf_to_xdp differentiate
between the first buffer and other ones to correctly calculate the maximum
frame's length.
Cc: stable@vger.kernel.org
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Fixes: a4e7ba7027 ("virtio_net: xsk: rx: support recv small mode")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250630151315.86722-2-minhquangbui99@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Bui Quang Minh says:
====================
virtio-net: fixes for mergeable XDP receive path
This series contains fixes for XDP receive path in virtio-net
- Patch 1: add a missing check for the received data length with our
allocated buffer size in mergeable mode.
- Patch 2: remove a redundant truesize check with PAGE_SIZE in mergeable
mode
- Patch 3: make the current repeated code use the check_mergeable_len to
check for received data length in mergeable mode
====================
Link: https://patch.msgid.link/20250630144212.48471-1-minhquangbui99@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jann reports that uprobes can be used destructively when used in the
middle of an instruction. The kernel only verifies there is a valid
instruction at the requested offset, but due to variable instruction
length cannot determine if this is an instruction as seen by the
intended execution stream.
Additionally, Mark Rutland notes that on architectures that mix data
in the text segment (like arm64), a similar things can be done if the
data word is 'mistaken' for an instruction.
As such, require CAP_SYS_ADMIN for uprobes.
Fixes: c9e0924e5c ("perf/core: open access to probes for CAP_PERFMON privileged process")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/CAG48ez1n4520sq0XrWYDHKiKxE_+WCfAK+qt9qkY4ZiBGmL-5g@mail.gmail.com
The name of BTN_GEAR_DOWN was WheelBtn and BTN_WHEEL was missing. Further,
BTN_GEAR_UP had a space in its name and no Btn, which is against convention.
This makes the names BtnGearDown, BtnGearUp, and BtnWheel, fixing the errors
and matching convention.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The ELECOM M-HT1DRBK trackball has an additional device ID (056E:019B)
not yet recognized by the driver, despite using the same report
descriptor as earlier variants. This patch adds the new ID and applies
the same fixups, enabling all 8 buttons to function properly.
Signed-off-by: Leonard Dizon <leonard@snekbyte.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
In appletb_kbd_probe an input handler is initialised and then registered
with input core through input_register_handler(). When this happens input
core will add the input handler (specifically its node) to the global
input_handler_list. The input_handler_list is central to the functionality
of input core and is traversed in various places in input core. An example
of this is when a new input device is plugged in and gets registered with
input core.
The input_handler in probe is allocated as device managed memory. If a
probe failure occurs after input_register_handler() the input_handler
memory is freed, yet it will remain in the input_handler_list. This
effectively means the input_handler_list contains a dangling pointer
to data belonging to a freed input handler.
This causes an issue when any other input device is plugged in - in my
case I had an old PixArt HP USB optical mouse and I decided to
plug it in after a failure occurred after input_register_handler().
This lead to the registration of this input device via
input_register_device which involves traversing over every handler
in the corrupted input_handler_list and calling input_attach_handler(),
giving each handler a chance to bind to newly registered device.
The core of this bug is a UAF which causes memory corruption of
input_handler_list and to fix it we must ensure the input handler is
unregistered from input core, this is done through
input_unregister_handler().
[ 63.191597] ==================================================================
[ 63.192094] BUG: KASAN: slab-use-after-free in input_attach_handler.isra.0+0x1a9/0x1e0
[ 63.192094] Read of size 8 at addr ffff888105ea7c80 by task kworker/0:2/54
[ 63.192094]
[ 63.192094] CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.16.0-rc2-00321-g2aa6621d
[ 63.192094] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.164
[ 63.192094] Workqueue: usb_hub_wq hub_event
[ 63.192094] Call Trace:
[ 63.192094] <TASK>
[ 63.192094] dump_stack_lvl+0x53/0x70
[ 63.192094] print_report+0xce/0x670
[ 63.192094] kasan_report+0xce/0x100
[ 63.192094] input_attach_handler.isra.0+0x1a9/0x1e0
[ 63.192094] input_register_device+0x76c/0xd00
[ 63.192094] hidinput_connect+0x686d/0xad60
[ 63.192094] hid_connect+0xf20/0x1b10
[ 63.192094] hid_hw_start+0x83/0x100
[ 63.192094] hid_device_probe+0x2d1/0x680
[ 63.192094] really_probe+0x1c3/0x690
[ 63.192094] __driver_probe_device+0x247/0x300
[ 63.192094] driver_probe_device+0x49/0x210
[ 63.192094] __device_attach_driver+0x160/0x320
[ 63.192094] bus_for_each_drv+0x10f/0x190
[ 63.192094] __device_attach+0x18e/0x370
[ 63.192094] bus_probe_device+0x123/0x170
[ 63.192094] device_add+0xd4d/0x1460
[ 63.192094] hid_add_device+0x30b/0x910
[ 63.192094] usbhid_probe+0x920/0xe00
[ 63.192094] usb_probe_interface+0x363/0x9a0
[ 63.192094] really_probe+0x1c3/0x690
[ 63.192094] __driver_probe_device+0x247/0x300
[ 63.192094] driver_probe_device+0x49/0x210
[ 63.192094] __device_attach_driver+0x160/0x320
[ 63.192094] bus_for_each_drv+0x10f/0x190
[ 63.192094] __device_attach+0x18e/0x370
[ 63.192094] bus_probe_device+0x123/0x170
[ 63.192094] device_add+0xd4d/0x1460
[ 63.192094] usb_set_configuration+0xd14/0x1880
[ 63.192094] usb_generic_driver_probe+0x78/0xb0
[ 63.192094] usb_probe_device+0xaa/0x2e0
[ 63.192094] really_probe+0x1c3/0x690
[ 63.192094] __driver_probe_device+0x247/0x300
[ 63.192094] driver_probe_device+0x49/0x210
[ 63.192094] __device_attach_driver+0x160/0x320
[ 63.192094] bus_for_each_drv+0x10f/0x190
[ 63.192094] __device_attach+0x18e/0x370
[ 63.192094] bus_probe_device+0x123/0x170
[ 63.192094] device_add+0xd4d/0x1460
[ 63.192094] usb_new_device+0x7b4/0x1000
[ 63.192094] hub_event+0x234d/0x3fa0
[ 63.192094] process_one_work+0x5bf/0xfe0
[ 63.192094] worker_thread+0x777/0x13a0
[ 63.192094] </TASK>
[ 63.192094]
[ 63.192094] Allocated by task 54:
[ 63.192094] kasan_save_stack+0x33/0x60
[ 63.192094] kasan_save_track+0x14/0x30
[ 63.192094] __kasan_kmalloc+0x8f/0xa0
[ 63.192094] __kmalloc_node_track_caller_noprof+0x195/0x420
[ 63.192094] devm_kmalloc+0x74/0x1e0
[ 63.192094] appletb_kbd_probe+0x39/0x440
[ 63.192094] hid_device_probe+0x2d1/0x680
[ 63.192094] really_probe+0x1c3/0x690
[ 63.192094] __driver_probe_device+0x247/0x300
[ 63.192094] driver_probe_device+0x49/0x210
[ 63.192094] __device_attach_driver+0x160/0x320
[...]
[ 63.192094]
[ 63.192094] Freed by task 54:
[ 63.192094] kasan_save_stack+0x33/0x60
[ 63.192094] kasan_save_track+0x14/0x30
[ 63.192094] kasan_save_free_info+0x3b/0x60
[ 63.192094] __kasan_slab_free+0x37/0x50
[ 63.192094] kfree+0xcf/0x360
[ 63.192094] devres_release_group+0x1f8/0x3c0
[ 63.192094] hid_device_probe+0x315/0x680
[ 63.192094] really_probe+0x1c3/0x690
[ 63.192094] __driver_probe_device+0x247/0x300
[ 63.192094] driver_probe_device+0x49/0x210
[ 63.192094] __device_attach_driver+0x160/0x320
[...]
Fixes: 7d62ba8dea ("HID: hid-appletb-kbd: add support for fn toggle between media and function mode")
Cc: stable@vger.kernel.org
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-07-01 (idpf, igc)
For idpf:
Michal returns 0 for key size when RSS is not supported.
Ahmed changes control queue to a spinlock due to sleeping calls.
For igc:
Vitaly disables L1.2 PCI-E link substate on I226 devices to resolve
performance issues.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: disable L1.2 PCI-E link substate to avoid performance issue
idpf: convert control queue mutex to a spinlock
idpf: return 0 size for RSS key if not supported
====================
Link: https://patch.msgid.link/20250701164317.2983952-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udp_v4_early_demux now returns drop reasons as it either returns 0 or
ip_mc_validate_source, which returns itself a drop reason. However its
use was not converted in ip_rcv_finish_core and the drop reason is
ignored, leading to potentially skipping increasing LINUX_MIB_IPRPFILTER
if the drop reason is SKB_DROP_REASON_IP_RPFILTER.
This is a fix and we're not converting udp_v4_early_demux to explicitly
return a drop reason to ease backports; this can be done as a follow-up.
Fixes: d46f827016 ("net: ip: make ip_mc_validate_source() return drop reason")
Cc: Menglong Dong <menglong8.dong@gmail.com>
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250701074935.144134-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The link status is latched low so that momentary link drops
can be detected. Always double-reading the status defeats this
design feature. Only double read if link was already down
This prevents unnecessary duplicate readings of the link status.
Fixes: 4f3b20bfbb ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701065016.4140707-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Certain classful qdiscs may invoke their classes' dequeue handler on an
enqueue operation. This may unexpectedly empty the child qdisc and thus
make an in-flight class passive via qlen_notify(). Most qdiscs do not
expect such behaviour at this point in time and may re-activate the
class eventually anyways which will lead to a use-after-free.
The referenced fix commit attempted to fix this behavior for the HFSC
case by moving the backlog accounting around, though this turned out to
be incomplete since the parent's parent may run into the issue too.
The following reproducer demonstrates this use-after-free:
tc qdisc add dev lo root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo parent 1: classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: hfsc def 1
tc class add dev lo parent 2: classid 2:1 hfsc rt m1 8 d 1 m2 0
tc qdisc add dev lo parent 2:1 handle 3: netem
tc qdisc add dev lo parent 3:1 handle 4: blackhole
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
tc class delete dev lo classid 1:1
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
Since backlog accounting issues leading to a use-after-frees on stale
class pointers is a recurring pattern at this point, this patch takes
a different approach. Instead of trying to fix the accounting, the patch
ensures that qdisc_tree_reduce_backlog always calls qlen_notify when
the child qdisc is empty. This solves the problem because deletion of
qdiscs always involves a call to qdisc_reset() and / or
qdisc_purge_queue() which ultimately resets its qlen to 0 thus causing
the following qdisc_tree_reduce_backlog() to report to the parent. Note
that this may call qlen_notify on passive classes multiple times. This
is not a problem after the recent patch series that made all the
classful qdiscs qlen_notify() handlers idempotent.
Fixes: 3f98113810 ("sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()")
Signed-off-by: Lion Ackermann <nnamrec@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
riscv fixes for 6.16-rc4
- A fix for a percpu variable that may lie in the vmalloc region and on which we used __pa()
- A fix to require at least clang-17 to prevent build issues with previous versions on kCFI
* tag 'riscv-fixes-6.16-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux:
riscv: cpu_ops_sbi: Use static array for boot_data
riscv: Require clang-17 or newer for kCFI
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Apply BROKEN_SD_DISCARD quirk earlier during init
- Silence some confusing error messages for SD UHS-II cards
MMC host:
- mtk-sd:
- Prevent memory corruption from DMA map failure
- Fix a pagefault in dma_unmap_sg() for not prepared data
- sdhci: Revert "Disable SD card clock before changing parameters"
- sdhci-of-k1: Fix error code in probe()
- sdhci-uhs2: Silence some confusing error messages for SD UHS-II cards"
* tag 'mmc-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mtk-sd: reset host->mrq on prepare_data() error
Revert "mmc: sdhci: Disable SD card clock before changing parameters"
mmc: sdhci-uhs2: Adjust some error messages and register dump for SD UHS-II card
mmc: sdhci: Add a helper function for dump register in dynamic debug mode
mmc: core: Adjust some error messages for SD UHS-II cards
mtk-sd: Prevent memory corruption from DMA map failure
mtk-sd: Fix a pagefault in dma_unmap_sg() for not prepared data
mmc: sdhci-of-k1: Fix error code in probe()
mmc: core: sd: Apply BROKEN_SD_DISCARD quirk earlier
Pull s390 fixes from Alexander Gordeev:
- Fix PCI error recovery and bring it in line with AER/EEH
* tag 's390-6.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: Allow automatic recovery with minimal driver support
s390/pci: Do not try re-enabling load/store if device is disabled
s390/pci: Fix stale function handles in error handling
Pull iommufd fixes from Jason Gunthorpe:
"Some changes to the userspace selftest framework cause the iommufd
tests to start failing. This turned out to be bugs in the iommufd side
that were just getting uncovered.
- Deal with MAP_HUGETLB mmaping more than requested even when in
MAP_FIXED mode
- Fixup missing error flow cleanup in the test
- Check that the memory allocations suceeded
- Suppress some bogus gcc 'may be used uninitialized' warnings"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Fix build warnings due to uninitialized mfd
iommufd/selftest: Add asserts testing global mfd
iommufd/selftest: Add missing close(mfd) in memfd_mmap()
iommufd/selftest: Fix iommufd_dirty_tracking with large hugepage sizes
Pull rdma fixes from Jason Gunthorpe:
"Several mlx5 bugs, crashers, and reports:
- Limit stack usage
- Fix mis-use of __xa_store/erase() without holding the lock to a
locked version
- Rate limit prints in the gid cache error cases
- Fully initialize the event object before making it globally visible
in an xarray
- Fix deadlock inside the ODP code if the MMU notifier was called
from a reclaim context
- Include missed counters for some switchdev configurations and
mulit-port MPV mode
- Fix loopback packet support when in mulit-port MPV mode"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Fix vport loopback for MPV device
RDMA/mlx5: Fix CC counters query for MPV
RDMA/mlx5: Fix HW counters query for non-representor devices
IB/core: Annotate umem_mutex acquisition under fs_reclaim for lockdep
IB/mlx5: Fix potential deadlock in MR deregistration
RDMA/mlx5: Initialize obj_event->obj_sub_list before xa_insert
RDMA/core: Rate limit GID cache warning messages
RDMA/mlx5: Fix unsafe xarray access in implicit ODP handling
RDMA/mlx5: reduce stack usage in mlx5_ib_ufile_hw_cleanup
dma_map_XXX() functions return values DMA_MAPPING_ERROR as error values
which is often ~0. The error value should be tested with
dma_mapping_error().
This patch creates a new function in niu_ops to test if the mapping
failed. The test is fixed in niu_rbr_add_page(), added in
niu_start_xmit() and the successfully mapped pages are unmaped upon error.
Fixes: ec2deec1f3 ("niu: Fix to check for dma mapping errors.")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A GEM handle can be released while the GEM buffer object is attached
to a DRM framebuffer. This leads to the release of the dma-buf backing
the buffer object, if any. [1] Trying to use the framebuffer in further
mode-setting operations leads to a segmentation fault. Most easily
happens with driver that use shadow planes for vmap-ing the dma-buf
during a page flip. An example is shown below.
[ 156.791968] ------------[ cut here ]------------
[ 156.796830] WARNING: CPU: 2 PID: 2255 at drivers/dma-buf/dma-buf.c:1527 dma_buf_vmap+0x224/0x430
[...]
[ 156.942028] RIP: 0010:dma_buf_vmap+0x224/0x430
[ 157.043420] Call Trace:
[ 157.045898] <TASK>
[ 157.048030] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.052436] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.056836] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.061253] ? drm_gem_shmem_vmap+0x74/0x710
[ 157.065567] ? dma_buf_vmap+0x224/0x430
[ 157.069446] ? __warn.cold+0x58/0xe4
[ 157.073061] ? dma_buf_vmap+0x224/0x430
[ 157.077111] ? report_bug+0x1dd/0x390
[ 157.080842] ? handle_bug+0x5e/0xa0
[ 157.084389] ? exc_invalid_op+0x14/0x50
[ 157.088291] ? asm_exc_invalid_op+0x16/0x20
[ 157.092548] ? dma_buf_vmap+0x224/0x430
[ 157.096663] ? dma_resv_get_singleton+0x6d/0x230
[ 157.101341] ? __pfx_dma_buf_vmap+0x10/0x10
[ 157.105588] ? __pfx_dma_resv_get_singleton+0x10/0x10
[ 157.110697] drm_gem_shmem_vmap+0x74/0x710
[ 157.114866] drm_gem_vmap+0xa9/0x1b0
[ 157.118763] drm_gem_vmap_unlocked+0x46/0xa0
[ 157.123086] drm_gem_fb_vmap+0xab/0x300
[ 157.126979] drm_atomic_helper_prepare_planes.part.0+0x487/0xb10
[ 157.133032] ? lockdep_init_map_type+0x19d/0x880
[ 157.137701] drm_atomic_helper_commit+0x13d/0x2e0
[ 157.142671] ? drm_atomic_nonblocking_commit+0xa0/0x180
[ 157.147988] drm_mode_atomic_ioctl+0x766/0xe40
[...]
[ 157.346424] ---[ end trace 0000000000000000 ]---
Acquiring GEM handles for the framebuffer's GEM buffer objects prevents
this from happening. The framebuffer's cleanup later puts the handle
references.
Commit 1a148af060 ("drm/gem-shmem: Use dma_buf from GEM object
instance") triggers the segmentation fault easily by using the dma-buf
field more widely. The underlying issue with reference counting has
been present before.
v2:
- acquire the handle instead of the BO (Christian)
- fix comment style (Christian)
- drop the Fixes tag (Christian)
- rename err_ gotos
- add missing Link tag
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.15/source/drivers/gpu/drm/drm_gem.c#L241 # [1]
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Anusha Srivatsa <asrivats@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250630084001.293053-1-tzimmermann@suse.de
There are two bugs in rose_rt_device_down() that can cause
use-after-free:
1. The loop bound `t->count` is modified within the loop, which can
cause the loop to terminate early and miss some entries.
2. When removing an entry from the neighbour array, the subsequent entries
are moved up to fill the gap, but the loop index `i` is still
incremented, causing the next entry to be skipped.
For example, if a node has three neighbours (A, A, B) with count=3 and A
is being removed, the second A is not checked.
i=0: (A, A, B) -> (A, B) with count=2
^ checked
i=1: (A, B) -> (A, B) with count=2
^ checked (B, not A!)
i=2: (doesn't occur because i < count is false)
This leaves the second A in the array with count=2, but the rose_neigh
structure has been freed. Code that accesses these entries assumes that
the first `count` entries are valid pointers, causing a use-after-free
when it accesses the dangling pointer.
Fix both issues by iterating over the array in reverse order with a fixed
loop bound. This ensures that all entries are examined and that the removal
of an entry doesn't affect subsequent iterations.
Reported-by: syzbot+e04e2c007ba2c80476cb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e04e2c007ba2c80476cb
Tested-by: syzbot+e04e2c007ba2c80476cb@syzkaller.appspotmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250629030833.6680-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update the Clause 37 Auto-Negotiation implementation to properly align
with the PCS hardware specifications:
- Fix incorrect bit settings in Link Status and Link Duplex fields
- Implement missing sequence steps 2 and 7
These changes ensure CL37 auto-negotiation protocol follows the exact
sequence patterns as specified in the hardware databook.
Fixes: 1bf40ada62 ("amd-xgbe: Add support for clause 37 auto-negotiation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20250630192636.3838291-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an option for completely disabling casefolding on a filesystem, as a
workaround for overlayfs.
This should only be needed as a temporary workaround, until the
overlayfs fix arrives.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
