Rename crtc_get_shared_dpll to take into the individual PLL framework
which came in at DISPLAY_VER >= 14.
Also having shared dpll stuff also in intel_dpll.c is just confusing.
--v2
-Change naming to dpll_global to keep consistency with rest of the
naming
--v3
-Just use intel_dpll [Jani]
--v4
-Modify commit message [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-9-suraj.kandpal@intel.com
Rename intel_shared_dpll to intel_dpll to represent both
shared and individual dplls. Since from MTL each PHY has it's
own PLL making the shared PLL naming a little outdated. In an
effort to make this framework accepting of future changes this
needs to be done.
--v2
-Use intel_dpll_global to make sure names start with the filename
[Jani/Ville]
-Explain the need of this rename [Jani]
--v3
-Just keep it intel_dpll [Jani]
--v4
-Fix comment [Jani]
-Use just num_dpll and dplls [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-7-suraj.kandpal@intel.com
Rename intel_shared_dpll_funcs to intel_dpll_funcs
since it needs to represent both shared and individual
dplls.
--v2
-Change intel_global_dpll to intel_dpll_global to be more
in line with the naming standard where the name should
start with the file name [Jani]
--v3
-Drop shared and global altogether [Jani]
--v4
-Keep declarations sorted [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-6-suraj.kandpal@intel.com
The register EMP_AS_SDP_TL (MTL) was introduced for configuring the
double buffering point and transmission line for all
HDMI2.1 Extended Metadata Packets (VT-EMP for VRR, CVT-EMP for DSC etc).
This was also intended to be configured for DP to HDMI2.1 PCON to
support VRR.
From BMG and LNL+ onwards, this register was extended to Display Port
Adaptive Sync SDP to have a common register to configure double
buffering point and transmission line for both HDMI EMPs and DP VRR related
packets.
Currently, we do not support VRR for either native HDMI or via PCON.
However we need to configure this for DP SDP case. As per the spec,
program the register to set Vsync start as the double buffering point
for DP AS SDP.
v2:
-Make the helper more readable. (Jani)
-Add more information in commit message and comment.
Bspec:70984, 71197
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Tested-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250505033911.393628-1-ankit.k.nautiyal@intel.com
Hook up PIPEDMC interrupts. We'll need these for:
- flip queue signalling
- GTT/ATS faults on LNL+
- unclaimed register access errors (supposedly that is what
the error interrupt indicated according to Windows code).
On LNL+ we get a new level of interrupts registers PIPEDMC_INTERRUPT*.
On earlier platforms we only have the INT_VECTOR field in the
PIPEDMC_STATUS registers, whose values are defined by the firmware.
For now we'll enable the interrupts on LNL+ only. For earlier platforms
it's not clear that there is any use for these interrupts, and some
ADL machines have exhibited spurious DE_PIPE interrupts with the
PIPEDMC interrupts unmasked/enabled. We can revisit enabling these
for earlier platforms in the future.
For some unknown reason LNL pipe B triggers the error interrupt
during the first DC state transition (subsequent transitions are
maybe OK?). No clear idea what's going on here yet, so keep the
error interrupt disabled for now.
Similar to DSB interrupt registers, the unused bits in
PIPEDMC_INTERRUPT* seem to act like randomg r/w bits (instead
of being hardwired to 0 like one would expect), and so we'll try
to avoid setting them so that we don't mistake them for real
interrupts.
v2: Only enable/unmask for LNL+
Keep the flip queue interrupt masked off for now since
we don't have a use for it yet
v3: Also keep the error interrupt masked off for now due to
LNL pipe B triggering it
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250514174257.8708-1-ville.syrjala@linux.intel.com
As the first step towards making struct intel_display an opaque pointer
in i915 and xe drivers, convert the struct drm_i915_private and struct
xe_device display members into pointers.
Initially, add temporary struct intel_display __display members, and
point display at it to avoid dynamic allocation. In the future, we can
drop this, and switch to dynamic allocation.
The conversion is done simply with sed:
sed -i 's/&\([a-zA-Z0-9_>.-]*\)\(dev_priv\|i915\|xe\)->display\([^.]\)/\1\2->display\3/g' \
$(git ls-files -- drivers/gpu/drm/i915 drivers/gpu/drm/xe)
sed -i 's/\(dev_priv\|i915\|xe\)->display\./\1->display->/g' \
$(git ls-files -- drivers/gpu/drm/i915 drivers/gpu/drm/xe)
With a couple of manual tweaks on top.
v2: Initialize i915->display also in selftest mock_gem_device()
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250507152254.2398934-1-jani.nikula@intel.com
drm-misc-next for v6.16-rc1:
Once more, with async flips.
UAPI Changes:
- Add IN_FORMATS_ASYNC property, use in i915.
Cross-subsystem Changes:
- Remove some unused debug code in dma-buf.
Core Changes:
Driver Changes:
- Add Novatek NT37801 panel.
- Allow submitting empty commands in amdxdna.
- Convert cirrus to use managed request_all_regions.
- Move Sitronix from tiny to their own place.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/23ded62c-6a62-4195-9c08-4dfb81eafd72@linux.intel.com
When calling component_bind_all(), if a component that is included
in the list fails, all of those that have been successfully bound
will be unbound, but this driver has two components lists for two
actual devices, as in, each mmsys instance has its own components
list.
In case mmsys0 (or actually vdosys0) is able to bind all of its
components, but the secondary one fails, all of the components of
the first are kept bound, while the ones of mmsys1/vdosys1 are
correctly cleaned up.
This is not right because, in case of a failure, the components
are re-bound for all of the mmsys/vdosys instances without caring
about the ones that were previously left in a bound state.
Fix that by calling component_unbind_all() on all of the previous
component masters that succeeded binding all subdevices when any
of the other masters errors out.
Fixes: 1ef7ed4835 ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
In function mtk_drm_get_all_drm_priv(), this driver is incrementing
the refcount for the sub-drivers of mediatek-drm with a call to
device_find_child() when taking a reference to all of those child
devices.
When the component bind fails multiple times this results in a
refcount_t overflow, as the reference count is never decremented:
fix that by adding a call to put_device() for all of the mmsys
devices in a loop, in error cases of mtk_drm_bind() and in the
mtk_drm_unbind() callback.
Fixes: 1ef7ed4835 ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This driver is taking a kobject for mtk_mutex only once per mmsys
device for each drm-mediatek driver instance, differently from the
behavior with other components, but it is decrementing the kobj's
refcount in a loop and once per mmsys: this is not right and will
result in a refcount_t underflow warning when mediatek-drm returns
multiple probe deferrals in one boot (or when manually bound and
unbound).
Besides that, the refcount for mutex_dev was not decremented for
error cases in mtk_drm_bind(), causing another refcount_t warning
but this time for overflow, when the failure happens not during
driver bind but during component bind.
In order to fix one of the reasons why this is happening, remove
the put_device(xx->mutex_dev) loop from the mtk_drm_kms_init()'s
put_mutex_dev label (and drop the label) and add a single call to
correctly free the single incremented refcount of mutex_dev to
the mtk_drm_unbind() function to fix the refcount_t underflow.
Moreover, add the same call to the error cases in mtk_drm_bind()
to fix the refcount_t overflow.
Fixes: 1ef7ed4835 ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-2-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Currently we are seeing these on PTL:
xe 0000:00:02.0: [drm] *ERROR* Timeout waiting for DDI BUF A to get active
These seem to be caused by writing ALPM registers while Panel Replay is
enabled.
Fix this by writing ALPM registers only when Panel Replay is about to be
enabled.
v4: improve comment on intel_psr_panel_replay_enable_sink call
v3: enable/disable ALPM from PSR code
Fixes: 172757acd6 ("drm/i915/lobf: Add lobf enablement in post plane update")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250513054814.3702977-3-jouni.hogander@intel.com
(cherry picked from commit a8eb102ce0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Currently we are seeing these on PTL:
xe 0000:00:02.0: [drm] *ERROR* Timeout waiting for DDI BUF A to get active
These seem to be caused by writing ALPM registers while Panel Replay is
enabled.
Fix this by writing ALPM registers only when Panel Replay is about to be
enabled.
v4: improve comment on intel_psr_panel_replay_enable_sink call
v3: enable/disable ALPM from PSR code
Fixes: 172757acd6 ("drm/i915/lobf: Add lobf enablement in post plane update")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250513054814.3702977-3-jouni.hogander@intel.com
