fragmentation_lru derives from dirty_sectors, and wasn't being checked.
Co-developed-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We need to make sure we're not missing any fragmenation entries in the
LRU BTREE after repairing ALLOC BTREE
Also, use the new bch2_btree_write_buffer_maybe_flush() helper; this was
only working without it before since bucket invalidation (usually)
wasn't happening while fsck was running.
Co-developed-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new helper for checking references to write buffer btrees, where
we need a flush before we definitively know we have an inconsistency.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
BCH_READ_NODECODE mode - used by the move paths - really wants to use
only the original rbio, but the retry path really wants to clone - oof.
Make sure to copy the crc of the pointer we read from back to the
original rbio, or we'll see spurious checksum errors later.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
On a new filesystem or device we have to allocate the journal with a
bump allocator, because allocation info isn't ready yet - but when
hot-adding a device that doesn't have a journal, we don't want to use
that path.
Reported-by: syzbot+24a867cb90d8315cccff@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
the unlock is now in read_extent, this fixes an assertion pop in
read_from_stale_dirty_pointer()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There's no reason for discards to be single threaded across all devices;
this will improve performance on multi device setups.
Additionally, making them per-device simplifies the refcounting on
bch_dev->io_ref; we now hold it for the duration that the discard path
is running, which fixes a race between the discard path and device
removal.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a rare deadlock when we're doing an emergency shutdown due to
failure to do a journal write.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The debug code relies on btree_trans_list being ordered so that it can
resume on subsequent calls or lock restarts.
However, it was using trans->locknig_wait.task.pid, which is incorrect
since btree_trans objects are cached and reused - typically by different
tasks.
Fix this by switching to pointer order, and also sort them lazily when
required - speeding up the btree_trans_get() fastpath.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
debug.c was using closure_get() on a different thread's closure where
the we don't know if the object being refcounted is alive.
We keep btree_trans objects on a list so they can be printed by debug
code, and because it is cost prohibitive to touch the btree_trans list
every time we allocate and free btree_trans objects, cached objects are
also on this list.
However, we do not want the debug code to see cached but not in use
btree_trans objects - critically because the btree_paths array will have
been freed (if it was reallocated).
closure_get() is also incorrect to use when that get may race with it
hitting zero, i.e. we must already have a ref on the object or know the
ref can't currently hit 0 for other reasons (as used in the cycle
detector).
to fix this, use the previously introduced closure_get_not_zero(),
closure_return_sync(), and closure_init_stack_release(); the debug code
now can only take a ref on a trans object if it's alive and in use.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Provide new primitives for solving a lifetime issue with bcachefs
btree_trans objects.
closure_sync_return(): like closure_sync(), wait synchronously for any
outstanding gets. like closure_return, the closure is considered
"finished" and the ref left at 0.
closure_get_not_zero(): get a ref on a closure if it's alive, i.e. the
ref is not zero.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree_deadlock_to_text() searches the list of btree transactions to find
a deadlock - when it finds one it's done; it's not like other *_read()
functions that's printing each object.
Factor out btree_deadlock_to_text() to make this clearer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We were grabbing the sequence number before unlock incremented it - fix
this by moving the increment to seqmutex_lock() (so the seqmutex_relock()
failure path skips the mutex_trylock()), and returning the sequence
number from unlock(), to make the API simpler and safer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
`inode->ei_flags` setting and cleaning should be done after initialization,
otherwise the operation is invalid.
Fixes: 9ca4853b98 ("bcachefs: Fix quota support for snapshots")
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
printk strings get truncated to 1024 bytes; if we have a long error
message (journal debug info) we need to use a helper.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
discard_new_inode() is the correct interface for tearing down an indoe
that was fully created but not made visible to other threads, but it
expects I_NEW to be set, which we don't use.
Reported-by: https://github.com/koverstreet/bcachefs/issues/690
Fixes: bcachefs: Fix race path in bch2_inode_insert()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Incorrect bucket state transition in the discard path; when incrementing
a bucket's generation number that had already been discarded, we were
forgetting to check if it should be need_gc_gens, not free.
This was caught by the .invalid checks in the transaction commit path,
causing us to go emergency read only.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With CONFIG_READ_ONLY_THP_FOR_FS, the Linux kernel supports using THPs
for read-only mmapped files, such as shared libraries. However, the
kernel makes no attempt to actually align those mappings on 2MB
boundaries, which makes it impossible to use those THPs most of the
time. This issue applies to general file mapping THP as well as
existing setups using CONFIG_READ_ONLY_THP_FOR_FS. This is easily
fixed by using thp_get_unmapped_area for the unmapped_area function
in bcachefs, which is what ext2, ext4, fuse, xfs and btrfs all use.
Similar to commit b0c582233a ("btrfs: fix alignment of VMA for
memory mapped files on THP").
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
i.e. the start of automatic self healing:
If errors=continue or fix_safe, we now automatically fix simple errors
without user intervention.
New error action option: fix_safe
This replaces the existing errors=ro option, which gets a new slot, i.e.
existing errors=ro users now get errors=fix_safe.
This is currently only enabled for a limited set of errors - initially
just disk accounting; errors we would never not want to fix, and we
don't want to require user intervention (i.e. to make sure a bug report
gets filed).
Errors will still be counted in the superblock, so we (developers) will
still know they've been occuring if a bug report gets filed (as bug
reports typically include the errors superblock section).
Eventually we'll be enabling this for a much wider set of errors, after
we've done thorough error injection testing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
reference: https://github.com/koverstreet/bcachefs/issues/692
trans->ref is the reference used by the cycle detector, which walks
btree_trans objects of other threads to walk the graph of held locks and
issue wakeups when an abort is required.
We have to wait for the ref to go to 1 before freeing trans->paths or
clearing trans->locking_wait.task.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We can only handle btree IDs up to 62, since the btree id (plus the type
for interior btree nodes) has to fit ito a 64 bit bitmask - check for
invalid ones to avoid invalid shifts later.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We can't discard a bucket while it's still open; this needs the
bucket_is_open_safe() version, which takes the open_buckets lock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We use 0 size arrays as markers, but ubsan doesn't know that - cast them
to a pointer to fix the splat.
Also, make sure this code gets tested a bit more.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull parisc fix from Helge Deller:
"On parisc we have suffered since years from random segfaults which
seem to have been triggered due to cache inconsistencies. Those
segfaults happened more often on machines with PA8800 and PA8900 CPUs,
which have much bigger caches than the earlier machines.
Dave Anglin has worked over the last few weeks to fix this bug. His
patch has been successfully tested by various people on various
machines and with various kernels (6.6, 6.8 and 6.9), and the debian
buildd servers haven't shown a single random segfault with this patch.
Since the cache handling has been reworked, the patch is slightly
bigger than I would like in this stage, but the greatly improved
stability IMHO justifies the inclusion now"
* tag 'parisc-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Try to fix random segmentation faults in package builds
Pull i2c fixes from Wolfram Sang:
"Two fixes to correctly report i2c functionality, ensuring that
I2C_FUNC_SLAVE is reported when a device operates solely as a slave
interface"
* tag 'i2c-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: Fix the functionality flags of the slave-only interface
i2c: at91: Fix the functionality flags of the slave-only interface
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.10-rc4.
Included in here are:
- thunderbolt debugfs bugfix
- USB typec bugfixes
- kcov usb bugfix
- xhci bugfixes
- usb-storage bugfix
- dt-bindings bugfix
- cdc-wdm log message spam bugfix
All of these, except for the last cdc-wdm log level change, have been
in linux-next for a while with no reported problems. The cdc-wdm
bugfix has been tested by syzbot and proved to fix the reported cpu
lockup issues when the log is constantly spammed by a broken device"
* tag 'usb-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages
xhci: Handle TD clearing for multiple streams case
xhci: Apply broken streams quirk to Etron EJ188 xHCI host
xhci: Apply reset resume quirk to Etron EJ188 xHCI host
xhci: Set correct transferred length for cancelled bulk transfers
usb-storage: alauda: Check whether the media is initialized
usb: typec: ucsi: Ack also failed Get Error commands
kcov, usb: disable interrupts in kcov_remote_start_usb_softirq
dt-bindings: usb: realtek,rts5411: Add missing "additionalProperties" on child nodes
usb: typec: tcpm: Ignore received Hard Reset in TOGGLING state
usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps
USB: xen-hcd: Traverse host/ when CONFIG_USB_XEN_HCD is selected
usb: typec: ucsi: glink: increase max ports for x1e80100
Revert "usb: chipidea: move ci_ulpi_init after the phy initialization"
thunderbolt: debugfs: Fix margin debugfs node creation condition
