[why]
When first time of link training is fail,
eDP would be powered down and
would not be powered up for next retry link training.
It causes that all of retry link linking would be fail.
[how]
We has extracted both power up and down sequence from
enable/disable link output function before DCN32.
We remov eDP power down in dcn32_disable_link_output().
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f5860c88cd)
[Why]
There should not be any need to revalidate bandwidth on memory placement
change, since the fb is expected to be pinned to DCN-accessable memory
before scanout. For APU it's DRAM, and DGPU, it's VRAM. However, async
flips + memory type change needs to be rejected.
[How]
Do not set lock_and_validation_needed on mem_type change. Instead,
reject an async_flip request if the crtc's buffer(s) changed mem_type.
This may fix stuttering/corruption experienced with PSR SU and PSR1
panels, if the compositor allocates fbs in both VRAM carveout and GTT
and flips between them.
Fixes: a7c0cad0dc ("drm/amd/display: ensure async flips are only accepted for fast updates")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4caacd1671)
Cc: stable@vger.kernel.org
[Why]
Outside of a modeset/link configuration change, we should not have to
wait for the panel to exit PSR. Depending on the panel and it's state,
it may take multiple frames for it to exit PSR. Therefore, waiting in
all scenarios may cause perceived stuttering, especially in combination
with faster vblank shutdown.
[How]
PSR1 disable is hooked up to the vblank enable event, and vice versa. In
case of vblank enable, do not wait for panel to exit PSR, but still wait
in all other cases.
We also avoid a call to unnecessarily change power_opts on disable -
this ends up sending another command to dmcub fw.
When testing against IGT, some crc tests like kms_plane_alpha_blend and
amd_hotplug were failing due to CRC timeouts. This was found to be
caused by the early return before HW has fully exited PSR1. Fix this by
first making sure we grab a vblank reference, then waiting for panel to
exit PSR1, before programming hw for CRC generation.
Fixes: 58a261bfc9 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3743
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit aa6713fa20)
Cc: stable@vger.kernel.org
Revert commit 284f141f5c ("drm/amd/display: Enable urgent latency adjustments for DCN35")
[Why & How]
Urgent latency increase caused 2.8K OLED monitor caused it to
block this panel support P0.
Reverting this change does not reintroduce the netflix corruption issue
which it fixed.
Fixes: 284f141f5c ("drm/amd/display: Enable urgent latency adjustments for DCN35")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c7ccfc0d42)
Cc: stable@vger.kernel.org
[Why]
Observed frame rate get dropped by tool like glxgear. Even though the
output to monitor is 60Hz, the rendered frame rate drops to 30Hz lower.
It's due to code path in some cases will trigger
dm_dp_mst_is_port_support_mode() to read out remote Link status to
assess the available bandwidth for dsc maniplation. Overhead of keep
reading remote DPCD is considerable.
[How]
Store the remote link BW in mst_local_bw and use end-to-end full_pbn
as an indicator to decide whether update the remote link bw or not.
Whenever we need the info to assess the BW, visit the stored one first.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3720
Fixes: fa57924c76 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4a9a918545)
Cc: stable@vger.kernel.org
Only apply when compute profile is selected. This is
the only supported configuration. Selecting other
profiles can lead to performane degradations.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d477e39532)
Cc: stable@vger.kernel.org # 6.12.x
Mediatek DRM Fixes - 20250104
1. Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing"
2. Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err
3. Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
4. Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
5. Add support for 180-degree rotation in the display driver
6. Stop selecting foreign drivers
7. Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
8. Fix YCbCr422 color format issue for DP
9. Fix mode valid issue for dp
10. dp: Reference common DAI properties
11. dsi: Add registers to pdata to fix MT8186/MT8188
12. Remove unneeded semicolon
13. Add return value check when reading DPCD
14. Initialize pointer in mtk_drm_of_ddp_path_build_one()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250104124227.45505-1-chunkuang.hu@kernel.org
If GuC fails to load, the driver wedges, but in the process it tries to
do stuff that may not be initialized yet. This moves the
xe_gt_tlb_invalidation_init() to be done earlier: as its own doc says,
it's a software-only initialization and should had been named with the
_early() suffix.
Move it to be called by xe_gt_init_early(), so the locks and seqno are
initialized, avoiding a NULL ptr deref when wedging:
xe 0000:03:00.0: [drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01
xe 0000:03:00.0: [drm] *ERROR* GT0: firmware signature verification failed
xe 0000:03:00.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:03:00.0 as wedged.
...
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 UID: 0 PID: 3908 Comm: modprobe Tainted: G U W 6.13.0-rc4-xe+ #3
Tainted: [U]=USER, [W]=WARN
Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DDR5 UDIMM CRB, BIOS ADLSFWI1.R00.3275.A00.2207010640 07/01/2022
RIP: 0010:xe_gt_tlb_invalidation_reset+0x75/0x110 [xe]
This can be easily triggered by poking the GuC binary to force a
signature failure. There will still be an extra message,
xe 0000:03:00.0: [drm] *ERROR* GT0: GuC mmio request 0x4100: no reply 0x4100
but that's better than a NULL ptr deref.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3956
Fixes: c9474b726b ("drm/xe: Wedge the entire device")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103001111.331684-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 5001ef3af8)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
[WHY & HOW]
commit 7fb363c575 ("drm/amd/display: Let drm_crtc_vblank_on/off manage interrupts")
lets drm_crtc_vblank_* to manage interrupts in amdgpu_dm_crtc_set_vblank,
and amdgpu_irq_get/put do not need to be called here. Part of that
patch got lost somehow, so fix it up.
Fixes: 7fb363c575 ("drm/amd/display: Let drm_crtc_vblank_on/off manage interrupts")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3782305ce5)
Cc: stable@vger.kernel.org
Pull Kbuild fixes from Masahiro Yamada:
- Fix escaping of '$' in scripts/mksysmap
- Fix a modpost crash observed with the latest binutils
- Fix 'provides' in the linux-api-headers pacman package
* tag 'kbuild-fixes-v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: pacman-pkg: provide versioned linux-api-headers package
modpost: work around unaligned data access error
modpost: refactor do_vmbus_entry()
modpost: fix the missed iteration for the max bit in do_input()
scripts/mksysmap: Fix escape chars '$'
Pull hotfixes from Andrew Morton:
"25 hotfixes. 16 are cc:stable. 18 are MM and 7 are non-MM.
The usual bunch of singletons and two doubletons - please see the
relevant changelogs for details"
* tag 'mm-hotfixes-stable-2025-01-04-18-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
MAINTAINERS: change Arınç _NAL's name and email address
scripts/sorttable: fix orc_sort_cmp() to maintain symmetry and transitivity
mm/util: make memdup_user_nul() similar to memdup_user()
mm, madvise: fix potential workingset node list_lru leaks
mm/damon/core: fix ignored quota goals and filters of newly committed schemes
mm/damon/core: fix new damon_target objects leaks on damon_commit_targets()
mm/list_lru: fix false warning of negative counter
vmstat: disable vmstat_work on vmstat_cpu_down_prep()
mm: shmem: fix the update of 'shmem_falloc->nr_unswapped'
mm: shmem: fix incorrect index alignment for within_size policy
percpu: remove intermediate variable in PERCPU_PTR()
mm: zswap: fix race between [de]compression and CPU hotunplug
ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv
fs/proc/task_mmu: fix pagemap flags with PMD THP entries on 32bit
kcov: mark in_softirq_really() as __always_inline
docs: mm: fix the incorrect 'FileHugeMapped' field
mailmap: modify the entry for Mathieu Othacehe
mm/kmemleak: fix sleeping function called from invalid context at print message
mm: hugetlb: independent PMD page table shared count
maple_tree: reload mas before the second call for mas_empty_area
...
Pull clk fixes from Stephen Boyd:
"A randconfig build fix and a performance fix:
- Fix the CONFIG_RESET_CONTROLLER=n path signature of
clk_imx8mp_audiomix_reset_controller_register() to appease
randconfig
- Speed up the sdhci clk on TH1520 by a factor of 4 by adding
a fixed factor clk"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: clk-imx8mp-audiomix: fix function signature
clk: thead: Fix TH1520 emmc and shdci clock rate
The Arch Linux glibc package contains a versioned dependency on
"linux-api-headers". If the linux-api-headers package provided by
pacman-pkg does not specify an explicit version this dependency is not
satisfied.
Fix the dependency by providing an explicit version.
Fixes: c8578539de ("kbuild: add script and target to generate pacman package")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull watchdog fix from Wim Van Sebroeck:
- fix error message during stm32 driver probe
* tag 'linux-watchdog-6.13-rc6' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: stm32_iwdg: fix error message during driver probe
Pull sched_ext fixes from Tejun Heo:
- Fix a bug where bpf_iter_scx_dsq_new() was not initializing the
iterator's flags and could inadvertently enable e.g. reverse
iteration
- Fix a bug where scx_ops_bypass() could call irq_restore twice
- Add Andrea and Changwoo as maintainers for better review coverage
- selftests and tools/sched_ext build and other fixes
* tag 'sched_ext-for-6.13-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix dsq_local_on selftest
sched_ext: initialize kit->cursor.flags
sched_ext: Fix invalid irq restore in scx_ops_bypass()
MAINTAINERS: add me as reviewer for sched_ext
MAINTAINERS: add self as reviewer for sched_ext
scx: Fix maximal BPF selftest prog
sched_ext: fix application of sizeof to pointer
selftests/sched_ext: fix build after renames in sched_ext API
sched_ext: Add __weak to fix the build errors
Pull workqueue fixes from Tejun Heo:
- Suppress a corner case spurious flush dependency warning
- Two trivial changes
* tag 'wq-for-6.13-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: add printf attribute to __alloc_workqueue()
workqueue: Do not warn when cancelling WQ_MEM_RECLAIM work from !WQ_MEM_RECLAIM worker
rust: add safety comment in workqueue traits
Pull block fixes from Jens Axboe:
"Collection of fixes for block. Particularly the target name overflow
has been a bit annoying, as it results in overwriting random memory
and hence shows up as triggering various other bugs.
- NVMe pull request via Keith:
- Fix device specific quirk for PRP list alignment (Robert)
- Fix target name overflow (Leo)
- Fix target write granularity (Luis)
- Fix target sleeping in atomic context (Nilay)
- Remove unnecessary tcp queue teardown (Chunguang)
- Simple cdrom typo fix"
* tag 'block-6.13-20250103' of git://git.kernel.dk/linux:
cdrom: Fix typo, 'devicen' to 'device'
nvme-tcp: remove nvme_tcp_destroy_io_queues()
nvmet-loop: avoid using mutex in IO hotpath
nvmet: propagate npwg topology
nvmet: Don't overflow subsysnqn
nvme-pci: 512 byte aligned dma pool segment quirk
Pull io_uring fixes from Jens Axboe:
- Fix an issue with the read multishot support and posting of CQEs from
io-wq context
- Fix a regression introduced in this cycle, where making the timeout
lock a raw one uncovered another locking dependency. As a result,
move the timeout flushing outside of the timeout lock, punting them
to a local list first
- Fix use of an uninitialized variable in io_async_msghdr. Doesn't
really matter functionally, but silences a valid KMSAN complaint that
it's not always initialized
- Fix use of incrementally provided buffers for read on non-pollable
files, where the buffer always gets committed upfront. Unfortunately
the buffer address isn't resolved first, so the read ends up using
the updated rather than the current value
* tag 'io_uring-6.13-20250103' of git://git.kernel.dk/linux:
io_uring/kbuf: use pre-committed buffer address for non-pollable file
io_uring/net: always initialize kmsg->msg.msg_inq upfront
io_uring/timeout: flush timeouts outside of the timeout lock
io_uring/rw: fix downgraded mshot read
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireles and netfilter.
Nothing major here. Over the last two weeks we gathered only around
two-thirds of our normal weekly fix count, but delaying sending these
until -rc7 seemed like a really bad idea.
AFAIK we have no bugs under investigation. One or two reverts for
stuff for which we haven't gotten a proper fix will likely come in the
next PR.
Current release - fix to a fix:
- netfilter: nft_set_hash: unaligned atomic read on struct
nft_set_ext
- eth: gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
Previous releases - regressions:
- net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
- mptcp:
- fix sleeping rcvmsg sleeping forever after bad recvbuffer adjust
- fix TCP options overflow
- prevent excessive coalescing on receive, fix throughput
- net: fix memory leak in tcp_conn_request() if map insertion fails
- wifi: cw1200: fix potential NULL dereference after conversion to
GPIO descriptors
- phy: micrel: dynamically control external clock of KSZ PHY, fix
suspend behavior
Previous releases - always broken:
- af_packet: fix VLAN handling with MSG_PEEK
- net: restrict SO_REUSEPORT to inet sockets
- netdev-genl: avoid empty messages in NAPI get
- dsa: microchip: fix set_ageing_time function on KSZ9477 and LAN937X
- eth:
- gve: XDP fixes around transmit, queue wakeup etc.
- ti: icssg-prueth: fix firmware load sequence to prevent time
jump which breaks timesync related operations
Misc:
- netlink: specs: mptcp: add missing attr and improve documentation"
* tag 'net-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init
net: ti: icssg-prueth: Fix firmware load sequence.
mptcp: prevent excessive coalescing on receive
mptcp: don't always assume copied data in mptcp_cleanup_rbuf()
mptcp: fix recvbuffer adjust on sleeping rcvmsg
ila: serialize calls to nf_register_net_hooks()
af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK
af_packet: fix vlan_get_tci() vs MSG_PEEK
net: wwan: iosm: Properly check for valid exec stage in ipc_mmio_init()
net: restrict SO_REUSEPORT to inet sockets
net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
net: sfc: Correct key_len for efx_tc_ct_zone_ht_params
net: wwan: t7xx: Fix FSM command timeout issue
sky2: Add device ID 11ab:4373 for Marvell 88E8075
mptcp: fix TCP options overflow.
net: mv643xx_eth: fix an OF node reference leak
gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
eth: bcmsysport: fix call balance of priv->clk handling routines
net: llc: reset skb->transport_header
netlink: specs: mptcp: fix missing doc
...
Pull nios2 fixlet from Dinh Nguyen:
- Use str_yes_no() helper function
* tag 'nios2_update_for_v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
nios2: Use str_yes_no() helper in show_cpuinfo()
Pull rdma fixes from Jason Gunthorpe:
"A lot of fixes accumulated over the holiday break:
- Static tool fixes, value is already proven to be NULL, possible
integer overflow
- Many bnxt_re fixes:
- Crashes due to a mismatch in the maximum SGE list size
- Don't waste memory for user QPs by creating kernel-only
structures
- Fix compatability issues with older HW in some of the new HW
features recently introduced: RTS->RTS feature, work around 9096
- Do not allow destroy_qp to fail
- Validate QP MTU against device limits
- Add missing validation on madatory QP attributes for RTR->RTS
- Report port_num in query_qp as required by the spec
- Fix creation of QPs of the maximum queue size, and in the
variable mode
- Allow all QPs to be used on newer HW by limiting a work around
only to HW it affects
- Use the correct MSN table size for variable mode QPs
- Add missing locking in create_qp() accessing the qp_tbl
- Form WQE buffers correctly when some of the buffers are 0 hop
- Don't crash on QP destroy if the userspace doesn't setup the
dip_ctx
- Add the missing QP flush handler call on the DWQE path to avoid
hanging on error recovery
- Consistently use ENXIO for return codes if the devices is
fatally errored
- Try again to fix VLAN support on iwarp, previous fix was reverted
due to breaking other cards
- Correct error path return code for rdma netlink events
- Remove the seperate net_device pointer in siw and rxe which
syzkaller found a way to UAF
- Fix a UAF of a stack ib_sge in rtrs
- Fix a regression where old mlx5 devices and FW were wrongly
activing new device features and failing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits)
RDMA/mlx5: Enable multiplane mode only when it is supported
RDMA/bnxt_re: Fix error recovery sequence
RDMA/rtrs: Ensure 'ib_sge list' is accessible
RDMA/rxe: Remove the direct link to net_device
RDMA/hns: Fix missing flush CQE for DWQE
RDMA/hns: Fix warning storm caused by invalid input in IO path
RDMA/hns: Fix accessing invalid dip_ctx during destroying QP
RDMA/hns: Fix mapping error of zero-hop WQE buffer
RDMA/bnxt_re: Fix the locking while accessing the QP table
RDMA/bnxt_re: Fix MSN table size for variable wqe mode
RDMA/bnxt_re: Add send queue size check for variable wqe
RDMA/bnxt_re: Disable use of reserved wqes
RDMA/bnxt_re: Fix max_qp_wrs reported
RDMA/siw: Remove direct link to net_device
RDMA/nldev: Set error code in rdma_nl_notify_event
RDMA/bnxt_re: Fix reporting hw_ver in query_device
RDMA/bnxt_re: Fix to export port num to ib_query_qp
RDMA/bnxt_re: Fix setting mandatory attributes for modify_qp
RDMA/bnxt_re: Add check for path mtu in modify_qp
RDMA/bnxt_re: Fix the check for 9060 condition
...
Pull pin control fixes from Linus Walleij:
- A small Kconfig fixup for the i.MX.
In principle this could come in from the SoC tree but the bug was
introduced from the pin control tree so let's fix it from here.
- Fix a sleep in atomic context in the MCP23xxx GPIO expander by
disabling the regmap locking and using explicit mutex locks.
* tag 'pinctrl-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mcp23s08: Fix sleeping in atomic context due to regmap locking
ARM: imx: Re-introduce the PINCTRL selection
Pull sound fixes from Takashi Iwai:
"The first new year pull request: no surprises, all small fixes,
including:
- Follow-up fixes for the new compress-offload API extension
- A couple of fixes for MIDI 2.0 UMP handling
- A trivial race fix for OSS sequencer emulation ioctls
- USB-audio and HD-audio fixes / quirks"
* tag 'sound-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: seq: Check UMP support for midi_version change
ALSA hda/realtek: Add quirk for Framework F111:000C
Revert "ALSA: ump: Don't enumeration invalid groups for legacy rawmidi"
ALSA: seq: oss: Fix races at processing SysEx messages
ALSA: compress_offload: fix remaining descriptor races in sound/core/compress_offload.c
ALSA: compress_offload: Drop unneeded no_free_ptr()
ALSA: hda/tas2781: Ignore SUBSYS_ID not found for tas2563 projects
ALSA: usb-audio: US16x08: Initialize array before use
Pull drm fixes from Dave Airlie:
"Happy New Year.
It was fairly quiet for holidays period, certainly nothing that worth
getting off the couch before I needed to, this is for the past two
weeks, i915, xe and some adv7511, I expect we will see some amdgpu etc
happening next week, but otherwise all quiet.
i915:
- Fix C10 pll programming sequence [cx0_phy]
- Fix power gate sequence. [dg1]
xe:
- uapi: Revert some devcoredump file format changes breaking a mesa
debug tool
- Fixes around waits when moving to system
- Fix a typo when checking for LMEM provisioning
- Fix a fault on fd close after unbind
- A couple of OA fixes squashed for stable backporting
adv7511:
- fix UAF
- drop single lane support
- audio infoframe fix"
* tag 'drm-fixes-2025-01-03' of https://gitlab.freedesktop.org/drm/kernel:
xe/oa: Fix query mode of operation for OAR/OAC
drm/i915/dg1: Fix power gate sequence.
drm/i915/cx0_phy: Fix C10 pll programming sequence
drm/xe: Fix fault on fd close after unbind
drm/xe/pf: Use correct function to check LMEM provisioning
drm/xe: Wait for migration job before unmapping pages
drm/xe: Use non-interruptible wait when moving BO to system
drm/xe: Revert some changes that break a mesa debug tool
drm: adv7511: Drop dsi single lane support
dt-bindings: display: adi,adv7533: Drop single lane support
drm: adv7511: Fix use-after-free in adv7533_attach_dsi()
drm/bridge: adv7511_audio: Update Audio InfoFrame properly
Pull ftrace fixes from Steven Rostedt:
- Add needed READ_ONCE() around access to the fgraph array element
The updates to the fgraph array can happen when callbacks are
registered and unregistered. The __ftrace_return_to_handler() can
handle reading either the old value or the new value. But once it
reads that value it must stay consistent otherwise the check that
looks to see if the value is a stub may show false, but if the
compiler decides to re-read after that check, it can be true which
can cause the code to crash later on.
- Make function profiler use the top level ops for filtering again
When function graph became available for instances, its filter ops
became independent from the top level set_ftrace_filter. In the
process the function profiler received its own filter ops as well.
But the function profiler uses the top level set_ftrace_filter file
and does not have one of its own. In giving it its own filter ops, it
lost any user interface it once had. Make it use the top level
set_ftrace_filter file again. This fixes a regression.
* tag 'ftrace-v6.13-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Fix function profiler's filtering functionality
fgraph: Add READ_ONCE() when accessing fgraph_array[]
For non-pollable files, buffer ring consumption will commit upfront.
This is fine, but io_ring_buffer_select() will return the address of the
buffer after having committed it. For incrementally consumed buffers,
this is incorrect as it will modify the buffer address.
Store the pre-committed value and return that. If that isn't done, then
the initial part of the buffer is not used and the application will
correctly assume the content arrived at the start of the userspace
buffer, but the kernel will have put it later in the buffer. Or it can
cause a spurious -EFAULT returned in the CQE, depending on the buffer
size. As bounds are suitably checked for doing the actual IO, no adverse
side effects are possible - it's just a data misplacement within the
existing buffer.
Reported-by: Gwendal Fernet <gwendalfernet@gmail.com>
Cc: stable@vger.kernel.org
Fixes: ae98dbf43d ("io_uring/kbuf: add support for incremental buffer consumption")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Meghana Malladi says:
====================
IEP clock module bug fixes
This series has some bug fixes for IEP module needed by PPS and
timesync operations.
Patch 1/2 fixes firmware load sequence to run all the firmwares
when either of the ethernet interfaces is up. Move all the code
common for firmware bringup under common functions.
Patch 2/2 fixes distorted PPS signal when the ethernet interfaces
are brough down and up. This patch also fixes enabling PPS signal
after bringing the interface up, without disabling PPS.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When ICSSG interfaces are brought down and brought up again, the
pru cores are shut down and booted again, flushing out all the memories
and start again in a clean state. Hence it is expected that the
IEP_CMP_CFG register needs to be flushed during iep_init() to ensure
that the existing residual configuration doesn't cause any unusual
behavior. If the register is not cleared, existing IEP_CMP_CFG set for
CMP1 will result in SYNC0_OUT signal based on the SYNC_OUT register values.
After bringing the interface up, calling PPS enable doesn't work as
the driver believes PPS is already enabled, (iep->pps_enabled is not
cleared during interface bring down) and driver will just return true
even though there is no signal. Fix this by disabling pps and perout.
Fixes: c1e0230eea ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Timesync related operations are ran in PRU0 cores for both ICSSG SLICE0
and SLICE1. Currently whenever any ICSSG interface comes up we load the
respective firmwares to PRU cores and whenever interface goes down, we
stop the resective cores. Due to this, when SLICE0 goes down while
SLICE1 is still active, PRU0 firmwares are unloaded and PRU0 core is
stopped. This results in clock jump for SLICE1 interface as the timesync
related operations are no longer running.
As there are interdependencies between SLICE0 and SLICE1 firmwares,
fix this by running both PRU0 and PRU1 firmwares as long as at least 1
ICSSG interface is up. Add new flag in prueth struct to check if all
firmwares are running and remove the old flag (fw_running).
Use emacs_initialized as reference count to load the firmwares for the
first and last interface up/down. Moving init_emac_mode and fw_offload_mode
API outside of icssg_config to icssg_common_start API as they need
to be called only once per firmware boot.
Change prueth_emac_restart() to return error code and add error prints
inside the caller of this functions in case of any failures.
Move prueth_emac_stop() from common to sr1 driver.
sr1 and sr2 drivers have different logic handling for stopping
the firmwares. While sr1 driver is dependent on emac structure
to stop the corresponding pru cores for that slice, for sr2
all the pru cores of both the slices are stopped and is not
dependent on emac. So the prueth_emac_stop() function is no
longer common and can be moved to sr1 driver.
Fixes: c1e0230eea ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts says:
====================
mptcp: rx path fixes
Here are 3 different fixes, all related to the MPTCP receive buffer:
- Patch 1: fix receive buffer space when recvmsg() blocks after
receiving some data. For a fix introduced in v6.12, backported to
v6.1.
- Patch 2: mptcp_cleanup_rbuf() can be called when no data has been
copied. For 5.11.
- Patch 3: prevent excessive coalescing on receive, which can affect the
throughput badly. It looks better to wait a bit before backporting
this one to stable versions, to get more results. For 5.10.
====================
Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-0-8608af434ceb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the skb size after coalescing is only limited by the skb
layout (the skb must not carry frag_list). A single coalesced skb
covering several MSS can potentially fill completely the receive
buffer. In such a case, the snd win will zero until the receive buffer
will be empty again, affecting tput badly.
Fixes: 8268ed4c9d ("mptcp: introduce and use mptcp_try_coalesce()")
Cc: stable@vger.kernel.org # please delay 2 weeks after 6.13-final release
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-3-8608af434ceb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
