Microchip ARM64 device tree updates for v7.1
This update includes:
- device tree files for the Microchip LAN9691 SoC and its evaluation
board (Microchip EV23X71A)
* tag 'microchip-dt64-7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/at91/linux:
arm64: dts: microchip: add EV23X71A board
dt-bindings: arm: AT91: document EV23X71A board
arm64: dts: microchip: add LAN969x support
arm64: dts: microchip: add LAN969x clock header file
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Krzysztof notes:
1. This might impact users of i.MX8MM SPDIF as compatible is being
replaced.
Frank Li writes:
i.MX arm64 device tree changes for 7.1:
- New Board Support
S32N79-RDB, Variscite DART-MX95, DART-MX91 with Sonata carrier boards,
Verdin iMX95 with multiple carrier boards (Yavia, Mallow, Ivy, Dahlia)
TQMa93xx/MBa93xxLA-MINI, SolidRun i.MX8MP HummingBoard IIoT,
SolidRun i.MX8MM SOM and EVB, SolidRun SolidSense-N8 board
Ka-Ro Electronics tx8m-1610 COM, GOcontroll Moduline IV and Moduline Mini,
NXP FRDM-IMX91S board, i.MX93 Wireless EVK board with Wireless SiP,
NXP i.MX8MP audio board v2.
- USB & Type-C Support
Type-C and USB nodes for imx943, correct power-fole for
imx8qxp-mek/imx8qm-mek.
- Audio Enhancements
PDM microphone, bt-sco, and WM8962 sound card support for i.MX952. AONMIX
MQS for i.MX95. Use audio-graph-card2 for imx8dxl-evk. WM8904 audio codec
for imx8mm-var-som.
- Thermal & Cooling
PF09/53 thermal zone, fan node, active cooling on A55, SCMI
sensor/lmm/cpu for imx943/imx94.
- Display Support
Multiple LVDS and parallel display overlays for TQ boards (imx91/imx93).
Parallel display for i.MX93. ontat,kd50g21-40nt-a1 panel for
imx93-9x9-qsb. pixpaper display overlay for i.MX93 FRDM.
- Networking
Multiple queue configuration on eqos for TQMa8MPxL.
MaxLinear PHY support, MCP251xFD CAN controller for imx8mm-var-som.
SDIO WiFi support (imx91-evk, imx8mp-evk, imx943-evk)
- Bluetooth Support
imx943-evk, imx93-14x14-evk, imx95-19x19-evk, imx8mp-evk, imx8mn-evk,
imx8mm-evk.
- Miscellaneous
xspi and MT35XU01G SPI NOR flash for i.MX952.
V2X/ELE mailbox nodes, SCMI misc ctrl-ids for imx94.
eDMA channel reservation for V2X, Cortex M7 support for imx95.
Ethos-U65 NPU and SRAM nodes for imx93.
Wire up DMA IRQ for PCIe for imx8qm-ss-hsio.
- Bug Fixes & Improvements
Complete pinmux for rcwsr12 to fix I2C bus recovery affect other module
pinmux for layscape platform.
Multiple bug fixes for GPIO polarity, IRQ types, pinmux configurations.
GICv3 PPI interrupt CPU mask cleanup across multiple SoCs.
Fixed Ethernet PHY IRQ types on TQ boards.
Fixed UART RTS/CTS muxing issues.
Fixed SD card issues on Kontron boards.
Fixed touch reset configuration.
Removed fallback ethernet-phy-ieee802.3-c22 where appropriate.
Move funnel outside from soc.
TMU sensor ID cleanup.
Change usdhc tuning step for eMMC and SD.
Hexadecimal format, readability improvements, duplicate removal.
* tag 'imx-dt64-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux: (139 commits)
arm64: dts: imx8qxp-mek: switch Type-C connector power-role to dual
arm64: dts: imx8qm-mek: switch Type-C connector power-role to dual
arm64: dts: lx2162a-clearfog: set sfp connector leds function and source
arm64: dts: lx2162a-sr-som: add crypto & rtc aliases, model
arm64: dts: lx2160a-cex7: add rtc alias
arm64: dts: lx2160a: complete pinmux for rcwsr12 configuration word
arm64: dts: lx2160a: change zeros to hexadecimal in pinmux nodes
arm64: dts: lx2160a: add sda gpio references for i2c bus recovery
arm64: dts: lx2160a: rename pinmux nodes for readability
arm64: dts: lx2160a: remove duplicate pinmux nodes
arm64: dts: lx2160a: change i2c0 (iic1) pinmux mask to one bit
arm64: dts: lx2160a-cex7/lx2162a-sr-som: fix usd-cd & gpio pinmux
arm64: dts: freescale: imx8mp-moduline-display-106: add typec-power-opmode property
arm64: dts: imx8mp-tqma8mpql: Add DT overlays to explicit list
arm64: dts: imx8mp-evk: Specify ADV7535 register addresses
arm64: dts: imx8dxl-evk: Use audio-graph-card2 for wm8960-2 and wm8960-3
arm64: dts: imx943-evk: Add pf09/53 thermal zone
arm64: dts: imx943-evk: Add fan node and enable active cooling on A55
arm64: dts: imx943-evk: Add nxp,ctrl-ids for scmi_misc
arm64: dts: imx943: Add thermal support
...
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
arm64: tegra: Device tree changes for v7.1-rc1
Various fixes and new additions across a number of devices. GPIO and PCI
are enabled on Tegra264 and the Jetson AGX Thor Developer Kit, allowing
it to boot via network and mass storage.
* tag 'tegra-for-7.1-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add Tegra264 GPIO controllers
arm64: tegra: smaug: Enable SPI-NOR flash
arm64: tegra: Add Jetson AGX Thor Developer Kit support
arm64: tegra: Add PCI controllers on Tegra264
arm64: tegra: Fix RTC aliases
arm64: tegra: Drop redundant clock and reset names for TSEC
arm64: tegra: Fix snps,blen properties
dt-bindings: pci: Document the NVIDIA Tegra264 PCIe controller
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
ARM: tegra: Device tree changes for v7.1-rc1
Various improvements for Tegra114 boards, as well as some legacy cleanup
for PAZ00 and Transformers devices.
* tag 'tegra-for-7.1-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: paz00: Configure WiFi rfkill switch through device tree
ARM: tegra: transformers: Add connector node
ARM: tegra: Add External Memory Controller node on Tegra114
ARM: tegra: Add ACTMON node to Tegra114 device tree
ARM: tegra: lg-x3: Add node for capacitive buttons
ARM: tegra: lg-x3: Add USB and power related nodes
ARM: tegra: lg-x3: Add panel and bridge nodes
ARM: tn7: Adjust panel node
ARM: tegra: Add SOCTHERM support on Tegra114
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Qualcomm Arm64 DeviceTree updates for v7.1
Introduce the Eliza, Glymur, Mahua, and IPQ5210 Qualcomm SoCs.
Introduce the Redmi 4A, Redmi Go, Arduino Monza (VENTUNO Q), Redmi Note
8T, Purwa EVK, ECS Liva QCS710, additional variants of the DB820c,
Ayaneo Pocket S2, Thundercomm AI Mini PC G1, Samsung Galaxy Core Prime
LTE Verizon Wireless, Wiko Pulp 4G, the Purwa-variant of ASUS Vivobook
S15, the Eliza MTP, and the Glymur and Mahua CRDs.
Introduce UFS support and flatten the DWC3 node on Hamoa. Enable UFS,
SDC, DisplayPort audio playback, and an EL2 overlay for the Hamoa IoT
EVK. Enable DisplayPort audio on the Hamoa CRD and add HDMI support on
the ASUS Zenbook A14. Reduce the duplication of thermal sensors across
Purwa and Hamoa.
Add the QPIC SPI NAND controller on IPQ5332 and IPQ9574. Describe and
enable the eMMC controller on IPQ9574.
Add display, audio/compute remoteprocs, QUP devices, thermal sensors,
display, and CoreSight on the Kaanapali platform. Enable audio, compute
display, PMIC, Bluetooth, and WiFi on the MTP. Describe PMIC, audio and
compute remoteprocs on QRD.
Add role-switching support for the tertiary USB controller on Lemans.
Enable the tertiary USB controller and the GPIO expander on the Lemans
EVK, and add an overlay for the IFP Mezzanine.
Add UFS, camera control interface, audio GPR, and FastRPC support on
Milos. Enable UFS, camera EEPROMs, and hall effect sensor on the
Fairphone FP6.
Add camera control interface and fix a variety of things on the Monaco
platform, add missing FastRPC compute banks. Add eMMC support, describe
the DisplayPort bridge and GPIO expander on the Monaco EVK. Add overlay
for EVK camera and the IFP mezzanine.
Add touchscreen to the Xiaomi Redmi 4A, 5A, and Go, and fix the board-id
on the 4A.
Add the ambient light and proximity sensor on the Asus ZenFone 2
Laser/Selfie.
On Kodiak-based boards, enable the ethernet and USB Type-A ports on the
Rb3Gen2, correct the LT9611 routing on the RubikPi3, add Bluetooth on
the IDP, and add front camera support on the Fairphone FP5.
Introduce an overlay for the Rb3Gen2 Industrial Mezzanine.
Describe DSI on the Monaco SoC and enable Bluetooth, WiFi and DSI/DP
bridge on the Ride board.
Describe the WiFi/BT combo chip properly on the QRB2210 RB1 and QRB4210.
The describe the DSI/DP bringde on the Arduino UnoQ.
01022af2d2 arm64: dts: qcom: sc7280-chrome-common: disable Venus
Introduce DSI display support on SC8280XP.
Add LLCC on SDM670 and another SPI controller on SDM630.
Properly describe the WiFi/BT chip on a variety of SDM845-based
devices. Introduce the "alert slider" on the OnePlus 6 and OnePlus 6T
devices.
Introduce the PRNG, describe the debug UART, and add the MDSS core reset
on SM6125. Enable the debug UART and fix various issues on the Xiaomi
Redmi Note 8. Describe the touchscreen on the Xiaomi Mi A3.
Properly describe the WiFi/BT combo chip in SM8150 HDK.
Improve the EAS properties on SM8550, in addition to various other
fixes. Introduce a new overlay for the HDK display card.
Introduce various smaller fixes across SM8450 and SM8650.
Add display support on SM8750 and enable DSI and DisplayPort on the MTP.
Also add tsens and thermal-zones.
Add ETR devices, flatten the USB controller node, and mark USB
controllers as wakeup-capable devices, on Talos.
Properly describe the IPA IMEM slice on a variety of platforms.
Drop redundant non-controllable regulator definitions from a variety of
boards.
Drop redundant VSYNC pin state definition from various platforms.
* tag 'qcom-arm64-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (254 commits)
arm64: dts: qcom: sm8250: Add missing CPU7 3.09GHz OPP
arm64: dts: qcom: sm8550-hdk: add support for the Display Card overlay
arm64: dts: qcom: msm8916-samsung-coreprimeltevzw: add device tree
dt-bindings: qcom: Document samsung,coreprimeltevzw
arm64: dts: qcom: msm8916-samsung-fortuna: Move SM5504 from rossa and refactor MUIC
arm64: dts: qcom: sdm670: add llcc
arm64: dts: qcom: qcm6490-fairphone-fp5: Add front camera support
arm64: dts: qcom: qcm6490-fairphone-fp5: Sort pinctrl nodes by pins
arm64: dts: qcom: milos-fairphone-fp6: Add camera EEPROMs on CCI busses
arm64: dts: qcom: milos: Add CCI busses
arm64: dts: qcom: purwa-iot-evk: Enable UFS
arm64: dts: qcom: eliza: Add thermal sensors
arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP
arm64: dts: qcom: sdm845-oneplus: Describe Wi-Fi/BT properly
arm64: dts: qcom: sdm845-google: Describe Wi-Fi/BT properly
arm64: dts: qcom: drop redundant zap-shader memory-region
arm64: dts: qcom: fix remaining gpu_zap_shader labels
arm64: dts: qcom: msm8996: fix indentation in sdhc2 node
arm64: dts: qcom: monaco-evk: enable UART6 for robot expansion board
arm64: dts: qcom: lemans-evk: enable UART0 for robot expansion board
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: soc/omap updates for v7.1
* tag 'omap-for-v7.1/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: omap2: dead code cleanup in kconfig for ARCH_OMAP4
ARM: OMAP1: Fix DEBUG_LL and earlyprintk on OMAP16XX
ARM: omap: fix all kernel-doc warnings
ARM: omap2: Replace scnprintf with strscpy in omap3_cpuinfo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New board, the Khadas Edge 2L. Newly added peripherals are the
OTP nvmem controllers for RK3528, RK3562 and RK3566/8, SPDIF on RK3576.
The RK3566/8 SoCs now also control the Pipe-clocks on their PCIe
controllers and UFSHC controller on RK3576 got an additional reset line.
Apart from that are of course individual board changes and fixes for
older issues that are not specific to the current development cycle.
* tag 'v7.1-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (44 commits)
arm64: dts: rockchip: configure hdmirx in Rock 5 ITX
arm64: dts: rockchip: assign pipe clock to rk356x PCIe lanes
arm64: dts: rockchip: Add mphy reset to ufshc node
arm64: dts: rockchip: Enable OTP controller for RK3528
arm64: dts: rockchip: Enable OTP controller for RK356x
arm64: dts: rockchip: Enable OTP controller for RK3562
arm64: dts: rockchip: Enable PCIe CLKREQ# for RK3588 on Rock 5b-5bp-5t series
arm64: dts: rockchip: add SD/eMMC aliases for ArmSom Sige5
arm64: dts: rockchip: Add SPDIF nodes to RK3576 device tree
arm64: dts: rockchip: Add Khadas Edge 2L board
dt-bindings: arm: rockchip: Add Khadas Edge 2L board
arm64: dts: rockchip: Fix RK3562 EVB2 model name
arm64: dts: rockchip: Correct Joystick Axes on Gameforce Ace
arm64: dts: rockchip: Correct Fan Supply for Gameforce Ace
Revert "arm64: dts: rockchip: add SPDIF audio to Beelink A1"
arm64: dts: rockchip: Fix Bluetooth stability on LCKFB TaiShan Pi
arm64: dts: rockchip: enable vicap dvp on wolfvision pf5 io expander
arm64: dts: rockchip: Add analog audio switches to RK3576 EVB1
arm64: dts: rockchip: Enable GPU on rk3566-pinenote
arm64: dts: rockchip: Make Jaguar PCIe-refclk pin use pull-up config
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
TI K3 device tree updates for v7.1
Generic Fixes/Cleanups:
- k3-pinctrl: Cleanup alignment and reorder macros
- ti,min-output-impedance addition to all K3 board DT files
SoC Specific Features and Fixes:
AM62L:
- Add RNG node
- Support cpufreq scaling
J721S2:
- Make MAIN domain system control bus a simple-bus
- Add second DSI node
J722S:
- Add main_i2c4 device node
J7200:
- Make MAIN domain system control bus a simple-bus
Board Specific Features and Fixes:
AM642 EVM:
- Add ICSSG0 overlay for dual EMAC support
AM62:
- LP-SK: Enable internal pulls for MMC0 data pins
- SK: Enable Main UART wakeup
- phycore-som: Add 128MiB of global CMA
- Verdin: Add Zinnia board support and misc cleanup
AM62A7-SK:
- Enable Main UART wakeup
- Fix pin name in comment from M19 to N22
AM62D2 EVM:
- Enable Main UART wakeup and set wakeup-source system-states
AM62L3 EVM:
- Disable MMC1 internal pulls on data pins
- Enable Main UART wakeup and enable wkup_uart0 pins/target node
AM62P:
- SK: Disable MMC1 internal pulls on data pins and enable Main UART
wakeup
- Verdin: Add Zinnia support and misc cleanup
AM68 PHYBoard:
- Add DSI->LVDS bridge, LVDS-Display overlay and PEB-AV-15 overlay
AM69 Aquila:
- Fix DP regulator enable GPIO
J721S2 CPB:
- Add QSPI flash partition details
Removal of SMARC-sAM67 board:
- Kontron SMARC-sAM67 board support along with all bindings
are dropped as board is no longer planned for production
* tag 'ti-k3-dt-for-v7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (47 commits)
arm64: dts: ti: k3-pinctrl: sort shift values numerically
arm64: dts: ti: k3-pinctrl: consistently use tabs for alignment
arm64: dts: ti: k3-am642-evm: Add ICSSG0 overlay for dual EMAC support
arm64: dts: ti: k3-am62p-verdin: Add Zinnia
arm64: dts: ti: k3-am62p-verdin: Add SPI_1_CS as GPIO
arm64: dts: ti: k3-am62p-verdin: Split UART_2 pinctrl group
arm64: dts: ti: k3-am62-verdin: Add Zinnia
arm64: dts: ti: k3-am62-verdin: Split UART_2 pinctrl group
arm64: dts: ti: k3-am62-verdin: Fix SPI_1 GPIO CS pinctrl label
dt-bindings: arm: ti: Add verdin am62/am62p zinnia board
arm64: dts: ti: k3-j721s2: Make MAIN domain system control bus a simple-bus
arm64: dts: ti: k3-j7200: Make MAIN domain system control bus a simple-bus
arm64: dts: ti: k3-am62-lp-sk: Enable internal pulls for MMC0 data pins
arm64: dts: ti: k3-am62l3-evm: Disable MMC1 internal pulls on data pins
arm64: dts: ti: k3-am62p5-sk: Disable MMC1 internal pulls on data pins
arm64: dts: ti: k3-am62d2-evm: Enable Main UART wakeup
arm64: dts: ti: k3-am62l3-evm: Enable Main UART wakeup
arm64: dts: ti: k3-am62p5-sk: Enable Main UART wakeup
arm64: dts: ti: k3-am62a7-sk: Enable Main UART wakeup
arm64: dts: ti: k3-am62x-sk-common: Enable Main UART wakeup
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
spear13xx.dtsi defines a thermal_flags property in spear thermal sensor
node which is both unused in kernel and undocumented in spear thermal
sensor's binding.
There were no dtbs_check warnings associated with this property as the
underlying spear thermal binding was not converted to DTSchema.
Most likely st,thermal-flags is a misspelling of thermal_flags in
spear13xx.dtsi. Since both st/spear1310.dtsi and st/spear1340.dtsi
define st,thermal-flags property in spear thermal sensor node, we can
safely remove this property from spear13xx.dtsi.
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20260329123449.309814-3-krishnagopi487@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm Arm32 DeviceTree updates for v7.1
Qualcomm APQ8084 is incomplete and hasn't seen functional contributions
since 2016, so drop the platform (for now?). Also drop a number of
unused IPQ-related dtsi files.
Lastly clean up the RPM bus clocks in MSM8974 interconnect nodes.
* tag 'qcom-arm32-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8974: Drop RPM bus clocks
ARM: dts: qcom: drop apq8084 support
ARM: dts: qcom: Drop unused .dtsi
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM64: DT: HiSilicon ARM64 DT updates for v7.1
- Rename dwmmc nodes to mmc to comply with the schema
* tag 'hisi-arm64-dt-for-7.1' of https://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: Rename dwmmc nodes to mmc
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SoCFPGA DTS updates for v7.1
- dt-bindings updates:
- Document fallback compatible for Stratix10 SoCDK eMMC board
- Document compatible for the Agilex5 SoCFPGA modular board
- Add emmc support for the Stratix10
- Drop CPU masks from the GICv3 PPI interrupts for Agilex5
* tag 'socfpga_updates_for_v7.1_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: intel: agilex5: Drop CPU masks from GICv3 PPI interrupts
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: stratix10: Add emmc support
dt-bindings: altera: Add fallback compatible for Stratix 10 SoCDK eMMC variant
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
T-HEAD Devicetrees for 7.1, part 2
Additional updates to T-Head device trees for v7.1:
- Enable the display pipeline for the TH1520-based BeagleV Ahead board
by adding the HDMI connector node, connecting it to the HDMI
controller, and activating the DPU and HDMI nodes.
- Add coefficients to the TH1520 PVT node as the values in the TH1520
manual differ from the defaults in the driver.
* tag 'thead-dt-for-v7.1-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux:
riscv: dts: thead: beaglev-ahead: enable HDMI output
riscv: dts: thead: th1520: add coefficients to the PVT node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add power domain and reset for SoC
- Add GPIO for both SoC and Radxa Orion O6 board
* tag 'cix-dt-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/cix:
arm64: dts: cix: add FCH(S0)/S5 GPIO controllers for sky1
arm64: dts: cix: Add scmi powerdomain nodes for sky1
arm64: dts: cix: add support for cix sky1 resets
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v7.1
1. New board: Exynos5250 based Google Manta (Nexus 10).
2. Few cleanups.
* tag 'samsung-dt-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exyons4412: Drop duplicated I2C address/size-cells
ARM: dts: exynos4210-smdkv310: Drop duplicated I2C address/size-cells
ARM: dts: exynos3250: Drop duplicated I2C address/size-cells
ARM: dts: exynos: Add Google Manta (Nexus 10)
dt-bindings: ARM: samsung: Add Google Manta (Nexus 10)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM64 changes for v7.1
1. Add initial support for Axis ARTPEC-9 SoC and Alfred board using it.
Just like ARTPEC-8, this is a derivative of Samsung Exynos SoC made
for Axis, sharing most or all of core SoC blocks with Samsung
designs.
2. New boards: Exynos7870 based Samsung Galaxy J7 (2016) and Samsung
Galaxy J5 (2017).
3. Google GS101 Pixel phone: describe all PMIC regulators and Maxim
fuel-gauge.
4. ExynosAutov920: add G3D (GPU) clock controller (CMU).
* tag 'samsung-dt64-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos8895: Move I2C address/size-cells to DTSI
arm64: dts: exynos7870: Move I2C address/size-cells to DTSI
arm64: dts: exynos: gs101-pixel-common: add Maxim MAX77759 fuel gauge
arm64: dts: exynos: add initial support for Samsung Galaxy J5
dt-bindings: arm: samsung: add compatible for samsung-j5y17lte
arm64: dts: exynosautov920: add CMU_G3D clock DT nodes
arm64: dts: exynos: gs101-pixel: add all S2MPG1x regulators
arm64: dts: exynos: add initial support for Samsung Galaxy J7 (2016)
dt-bindings: arm: samsung: add compatible for samsung-j7xelte
arm64: dts: axis: artpec9: Fix missing soc unit address
arm64: dts: axis: Add ARTPEC-9 Alfred board support
arm64: dts: exynos: axis: Add initial ARTPEC-9 SoC support
dt-bindings: arm: axis: Add ARTPEC-9 alfred board
dt-bindings: clock: Add ARTPEC-9 clock controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 7.1, please pull the following:
- Maira adds the V3D DT node to the 2712 (Raspberry Pi 5) SoC
- Gergor adds the I2C controller, CSI (camera), ISP (image signal
processor), fixes the pinctrl node and updates the UART10 interrupt
for the RP1 sister chip to the 2712 (Raspberry Pi 5)
- Rob moves the firmware and GPU to the root level to fix DTC warnings
* tag 'arm-soc/for-7.1/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm2712: Move non simple-bus nodes to root level
arm64: dts: broadcom: bcm2712-d-rpi-5-b: update uart10 interrupt
arm64: dts: broadcom: bcm2712-d-rpi-5-b: add fixes for pinctrl/pinctrl_aon
arm64: dts: broadcom: bcm2712-rpi-5-b: add pinctrl properties for csi i2cs
arm64: dts: broadcom: bcm2712: add camera backend node pispbe
arm64: dts: broadcom: rp1: add csi nodes
arm64: dts: broadcom: rp1: add i2c controller
arm64: dts: broadcom: bcm2712: Add V3D device node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 7.1, please pull the following:
- Rafal provides a complete description of the PCIe Root Complex nodes
in order to silence a number of dtc warnings
- Rosen provides the necessary NVMEM properties to allow describing the
WAN device MAC address from NVRAM, also adds better LEDs, USB GPIOs
and Wi-Fi buttons for the Linksys EA9200 router
- Linus completes the BCA devices description by adding the I2C block
and fixing interrupts for the DMA block on 63138 and 6878
* tag 'arm-soc/for-7.1/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: EA9200: specify partitions
ARM: dts: BCM5301X: EA9200: add LEDs
ARM: dts: BCM5301X: EA9200: add USB GPIOs
ARM: dts: BCM5301X: EA9200: add WiFi button
ARM: dts: broadcom: bcm2835-rpi: Move non simple-bus nodes to root level
ARM: dts: bcm63148: Add I2C block
ARM: dts: bcm63138: Add I2C block
ARM: dts: bcm6878: Add I2C bus block
ARM: dts: bcm6855: Add I2C bus blocks
ARM: dts: bcm6846: Add I2C bus block
ARM: dts: bcm63138: Fix DMA IRQ
ARM: dts: bcm6878: Fix PL081 DMA block IRQ
ARM: dts: BCM5301X: AC5300: set WAN MAC from nvram
ARM: dts: BCM5301X: AC3100: set WAN MAC from nvram
ARM: dts: BCM5301X: panamera: set WAN MAC from nvram
ARM: dts: BCM5301X: EA9200: set WAN MAC from nvram
ARM: dts: BCM5301X: add root pcie bridges
ARM: dts: BCM5301X: Drop extra NAND controller compatible
ARM: dts: BCM5301X: Describe PCIe controllers fully
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
nuvoton: first batch of arm64 devicetree changes for v7.1
Just the one change this time, dropping syscon properties where they weren't
defined.
* tag 'nuvoton-arm64-7.1-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
arm64: dts: nuvoton: drop unused syscon property from watchdog node
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add devicetree overlay for the Seeed Studio BeagleBone HDMI cape, which
provides HDMI output via an ITE IT66121 HDMI bridge and audio support
through McASP.
The cape is designed for BeagleBone Green but is also compatible with
BeagleBone and BeagleBone Black due to pin compatibility.
Link: https://www.seeedstudio.com/Seeed-Studio-BeagleBoner-Green-HDMI-Cape.html
Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com>
Signed-off-by: Kevin Hilman (TI) <khilman@baylibre.com>
Unlike older GIC variants, the GICv3 DT bindings do not support
specifying a CPU mask in PPI interrupt specifiers. Drop the masks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Stratix10 devkit supports a separate eMMC daughter card. The eMMC
daughter card replaces the SDMMC slot that is on the default daughter card
and thus requires a separate board dts file.
Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Stratix 10 devkit support a separate eMMC daughter card. Add compatible
string for the Stratix 10 SoCDK eMMC daughter board with
"altr,socfpga-stratix10-socdk" as a fallback, since this variant is based
on the standard SoCDK board.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Samsung Galaxy Core Prime Verizon Wireless is a phone based on MSM8916.
They are similar to the other Samsung devices based on MSM8916 with only a
few minor differences.
The device trees contain initial support with:
- GPIO keys
- Regulator haptic
- SDHCI (internal and external storage)
- USB Device Mode
- UART (on USB connector via the SM5502 MUIC)
- WCNSS (WiFi/BT)
- Regulators
- QDSP6 audio
- Speaker/earpiece/headphones/microphones via digital/analog codec in
MSM8916/PM8916
- WWAN Internet via BAM-DMUX
- PMIC and charger
- Touchscreen
There are different variants of Core Prime, with some differences in
NFC and MUIC.
The common parts are shared in
msm8916-samsung-fortuna-common.dtsi and msm8916-samsung-rossa-common.dtsi
to reduce duplication.
Signed-off-by: Max McNamee <maxmcnamee@proton.me>
[Raymond: Refactor touchscreen and MUIC. Add commit messages.]
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260223220514.2556033-4-wonderfulshrinemaidenofparadise@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The onboard Wi-Fi / BT device, WCN3990, has a simple on-chip PMU, which
further spreads generated voltage. Describe the PMU in the device tree
and rewire Bluetooth and WiFi supply properties to use the PMU LDO
outputs instead of referencing the SoC regulators directly.
Verified against the datasheet.
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327-wcn3990-pwrctl-sdm845-v1-2-3f5c34e3fdd0@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The onboard Wi-Fi / BT device, WCN3990, has a simple on-chip PMU, which
further spreads generated voltage. Describe the PMU in the device tree
and rewire Bluetooth and Wi-Fi supply properties to use the PMU LDO
outputs instead of referencing the SoC regulators directly.
Couldn't verify the swctrl GPIO thus omitted.
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327-wcn3990-pwrctl-sdm845-v1-1-3f5c34e3fdd0@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
