The shift and w value in rcar_canfd_setrnc() are dictated by the
field width:
- R-Car Gen4 packs 2 values in a 32-bit word, using a field width
of 16 bits,
- R-Car Gen3 packs up to 4 values in a 32-bit word, using a field
width of 8 bits.
Add rnc_field_width variable to struct rcar_canfd_hw_info to handle this
difference. The rnc_stride is 32 / rnc_field_width and the index parameter
w is calculated by ch / rnc_stride. The shift value in rcar_canfd_setrnc()
is computed by using (32 - (ch % rnc_stride + 1) * rnc_field_width).
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250417054320.14100-10-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
After having factored out the provider part from mdio_bus.c, we can
make the mdio consumer / device layer a separate module. This also
allows to remove Kconfig symbol MDIO_DEVICE.
The module init / exit functions from mdio_bus.c no longer have to be
called from phy_device.c. The link order defined in
drivers/net/phy/Makefile ensures that init / exit functions are called
in the right order.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/dba6b156-5748-44ce-b5e2-e8dc2fcee5a7@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Gur Stavi says:
====================
queue_api: reduce risk of name collision over txq
Rename local variable in macros from txq to _txq.
When macro parameter get_desc is expended it is likely to have a txq
token that refers to a different txq variable at the caller's site.
====================
Link: https://patch.msgid.link/cover.1747559621.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
idpf: add initial PTP support
Milena Olech says:
This patch series introduces support for Precision Time Protocol (PTP) to
Intel(R) Infrastructure Data Path Function (IDPF) driver. PTP feature is
supported when the PTP capability is negotiated with the Control
Plane (CP). IDPF creates a PTP clock and sets a set of supported
functions.
During the PTP initialization, IDPF requests a set of PTP capabilities
and receives a writeback from the CP with the set of supported options.
These options are:
- get time of the PTP clock
- set the time of the PTP clock
- adjust the PTP clock
- Tx timestamping
Each feature is considered to have direct access, where the operations
on PCIe BAR registers are allowed, or the mailbox access, where the
virtchnl messages are used to perform any PTP action. Mailbox access
means that PTP requests are sent to the CP through dedicated secondary
mailbox and the CP reads/writes/modifies desired resource - PTP Clock
or Tx timestamp registers.
Tx timestamp capabilities are negotiated only for vports that have
UPLINK_VPORT flag set by the CP. Capabilities provide information about
the number of available Tx timestamp latches, their indexes and size of
the Tx timestamp value. IDPF requests Tx timestamp by setting the
TSYN bit and the requested timestamp index in the context descriptor for
the PTP packets. When the completion tag for that packet is received,
IDPF schedules a worker to read the Tx timestamp value.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
idpf: add support for Rx timestamping
idpf: add Tx timestamp flows
idpf: add Tx timestamp capabilities negotiation
idpf: add PTP clock configuration
idpf: add mailbox access to read PTP clock time
idpf: negotiate PTP capabilities and get PTP clock
idpf: move virtchnl structures to the header file
virtchnl: add PTP virtchnl definitions
idpf: add initial PTP support
idpf: change the method for mailbox workqueue allocation
====================
Link: https://patch.msgid.link/20250516170645.1172700-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Seems like the extack cookie hasn't found any users outside
of wireless, which always uses nl_set_extack_cookie_u64().
Thus, allocating 20 bytes for it is pointless, reduce that
to 8 bytes, and add a BUILD_BUG_ON() to ensure it's enough
(obviously it is, for a u64, but in case it changes again.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250516115927.38209-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Antonio Quartulli says:
====================
ovpn: pull request for net-next: ovpn 2025-05-15
this is a new version of the previous pull request.
These time I have removed the fixes that we are still discussing,
so that we don't hold the entire series back.
There is a new fix though: it's about properly checking the return value
of skb_to_sgvec_nomark(). I spotted the issue while testing pings larger
than the iface's MTU on a TCP VPN connection.
I have added various Closes and Link tags where applicable, so
that we have references to GitHub tickets and other public discussions.
Since I have resent the PR, I have also added Andrew's Reviewed-by to
the first patch.
Please pull or let me know if something should be changed!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Patchset highlights:
- update MAINTAINERS entry for ovpn
- extend selftest with more cases
- avoid crash in selftest in case of getaddrinfo() failure
- fix ndo_start_xmit return value on error
- set ignore_df flag for IPv6 packets
- drop useless reg_state check in keepalive worker
- retain skb's dst when entering xmit function
- fix check on skb_to_sgvec_nomark() return value
When the other peer calls shutdown(SHUT_RD), there is a chance that
the send() call could occur before the message carrying the close
information arrives over the transport. In such cases, the send()
might still succeed. To avoid this race, let's retry the send() call
a few times, ensuring the test is more reliable.
Sleep a little before trying again to avoid flooding the other peer
and filling its receive buffer, causing false-negative.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-3-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tools: ynl-gen: support sub-messages and rt-link
Sub-messages are how we express "polymorphism" in YNL. Donald added
the support to specs and Python a while back, support them in C, too.
Sub-message is a nest, but the interpretation of the attribute types
within that nest depends on a value of another attribute. For example
in rt-link the "kind" attribute contains the link type (veth, bonding,
etc.) and based on that the right enum has to be applied to interpret
link-specific attributes.
The last message is probably the most interesting to look at, as it
adds a fairly advanced sample.
This patch only contains enough support for rtnetlink, we will need
a little more complexity to support TC, where sub-messages may contain
fixed headers, and where the selector may be in a different nest than
the submessage.
====================
Link: https://patch.msgid.link/20250515231650.1325372-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a fairly complete example of rt-link usage. If run without any
arguments it simply lists the interfaces and some of their attrs.
If run with an arg it tries to create and delete a netkit device.
1 # ./tools/net/ynl/samples/rt-link 1
2 Trying to create a Netkit interface
3 Testing error message for policy being bad:
4 Kernel error: 'Provided default xmit policy not supported' (bad attribute: .linkinfo.data(netkit).policy)
5 1: lo: mtu 65536
6 2: wlp0s1: mtu 1500
7 3: enp0s13: mtu 1500
8 4: dummy0: mtu 1500 kind dummy altname one two
9 5: nk0: mtu 1500 kind netkit primary 0 policy forward
10 6: nk1: mtu 1500 kind netkit primary 1 policy blackhole
11 Trying to delete a Netkit interface (ifindex 6)
Sample creates the device first, it sets an invalid value for a netkit
attribute to trigger reverse parsing. Line 4 shows the error with the
attribute path correctly generated by YNL.
Then sample fixes the bad attribute and re-issues the request, with
NLM_F_ECHO set. This flag causes the notification to be looped back
to the initiating socket (our socket). Sample parses this notification
to save the ifindex of the created netkit.
Sample then proceeds to list the devices. Line 8 above shows a dummy
device with two alt names. Lines 9 and 10 show the netkit devices
the sample itself created.
The "primary" and "policy" attrs are from inside the netkit submsg.
The string values are auto-generated for the enums by YNL.
To clean up sample deletes the interface it created (line 11).
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reverse parsing lets YNL convert bad and missing attr pointers
from extack into a string like "missing attribute nest1.nest2.attr_name".
It's a feature that's unique to YNL C AFAIU (even the Python YNL
can't do nested reverse parsing). Add support for reverse-parsing
of sub-messages.
To simplify the logic and the code annotate the type policies
with extra metadata. Mark the selectors and the messages with
the information we need. We assume that key / selector always
precedes the sub-message while parsing (and also if there are
multiple sub-messages like in rt-link they are interleaved
selector 1 ... submsg 1 ... selector 2 .. submsg 2, not
selector 1 ... selector 2 ... submsg 1 ... submsg 2).
The rt-link sample in a subsequent changes shows reverse parsing
of sub-messages in action.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adjust parsing and rendering appropriately to make sub-messages work.
Rendering is pretty trivial, as the submsg -> netlink conversion looks
like rendering a nest in which only one attr was set. Only trick
is that we use the enum value of the sub-message rather than the nest
as the type, and effectively skip one layer of nesting. A real double
nested struct would look like this:
[SELECTOR]
[SUBMSG]
[NEST]
[MSG1-ATTR]
A submsg "is" the nest so by skipping I mean:
[SELECTOR]
[SUBMSG]
[MSG1-ATTR]
There is no extra validation in YNL if caller has set the selector
matching the submsg type (e.g. link type = "macvlan" but the nest
attrs are set to carry "veth"). Let the kernel handle that.
Parsing side is a little more specialized as we need to render and
insert a new kind of function which switches between what to parse
based on the selector. But code isn't too complicated.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The easiest (or perhaps only sane) way to support submessages in C
is to treat them as if they were nests. Build fake attributes to
that effect in the codegen. Render the submsg as a big nest of all
possible values.
With this in place the main missing part is to hook in the switch
which selects how to parse based on the key.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for constructing Struct() instances which represent
sub-messages rather than nested attributes.
Restructure the code / indentation to more easily insert
a case where nested reference comes from annotation other
than the 'nested-attributes' property. Make sure we don't
construct the Struct() object from scratch in multiple
places as the constructor will soon have more arguments.
This should cause no functional change.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFS can exhibit lower performance for workloads using short-lived
flows and a small set of 4-tuple.
This is often the case for load-testers, using a pair of hosts,
if the server has a single listener port.
Typical use case :
Server : tcp_crr -T128 -F1000 -6 -U -l30 -R 14250
Client : tcp_crr -T128 -F1000 -6 -U -l30 -c -H server | grep local_throughput
This is because RFS global hash table contains stale information,
when the same RSS key is recycled for another socket and another cpu.
Make sure to undo the changes and go back to initial state when
a flow is disconnected.
Performance of the above test is increased by 22 %,
going from 372604 transactions per second to 457773.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Octavian Purdila <tavip@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250515100354.3339920-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch synchronizes code that accesses from both user-space
and IRQ contexts. The `get_stats()` function can be called from both
context.
`dev->stats.tx_errors` and `dev->stats.collisions` are also updated
in the `tx_errors()` function. Therefore, these fields must also be
protected by synchronized.
There is no code that accessses `dev->stats.tx_errors` between the
previous and updated lines, so the updating point can be moved.
Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com>
Link: https://patch.msgid.link/20250515075333.48290-1-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CONFIG_INIT_STACK_ALL_ZERO introduces a performance cost by
zero-initializing all stack variables on function entry. The mlx5 XDP
RX path previously allocated a struct mlx5e_xdp_buff on the stack per
received CQE, resulting in measurable performance degradation under
this config.
This patch reuses a mlx5e_xdp_buff stored in the mlx5e_rq struct,
avoiding per-CQE stack allocations and repeated zeroing.
With this change, XDP_DROP and XDP_TX performance matches that of
kernels built without CONFIG_INIT_STACK_ALL_ZERO.
Performance was measured on a ConnectX-6Dx using a single RX channel
(1 CPU at 100% usage) at ~50 Mpps. The baseline results were taken from
net-next-6.15.
Stack zeroing disabled:
- XDP_DROP:
* baseline: 31.47 Mpps
* baseline + per-RQ allocation: 32.31 Mpps (+2.68%)
- XDP_TX:
* baseline: 12.41 Mpps
* baseline + per-RQ allocation: 12.95 Mpps (+4.30%)
Stack zeroing enabled:
- XDP_DROP:
* baseline: 24.32 Mpps
* baseline + per-RQ allocation: 32.27 Mpps (+32.7%)
- XDP_TX:
* baseline: 11.80 Mpps
* baseline + per-RQ allocation: 12.24 Mpps (+3.72%)
Reported-by: Sebastiano Miano <mianosebastiano@gmail.com>
Reported-by: Samuel Dobron <sdobron@redhat.com>
Link: https://lore.kernel.org/all/CAMENy5pb8ea+piKLg5q5yRTMZacQqYWAoVLE1FE9WhQPq92E0g@mail.gmail.com/
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/1747253032-663457-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current implementation requires syscon compatible for pio property
which is used for driving the switch leds on mt7988.
Replace syscon_regmap_lookup_by_phandle with of_parse_phandle and
device_node_to_regmap to get the regmap already assigned by pinctrl
driver.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://patch.msgid.link/20250510174933.154589-1-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add Rx timestamp function when the Rx timestamp value is read directly
from the Rx descriptor. In order to extend the Rx timestamp value to 64
bit in hot path, the PHC time is cached in the receive groups.
Add supported Rx timestamp modes.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: YiFei Zhu <zhuyifei@google.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add functions to request Tx timestamp for the PTP packets, read the Tx
timestamp when the completion tag for that packet is being received,
extend the Tx timestamp value and set the supported timestamping modes.
Tx timestamp is requested for the PTP packets by setting a TSYN bit and
index value in the Tx context descriptor. The driver assumption is that
the Tx timestamp value is ready to be read when the completion tag is
received. Then the driver schedules delayed work and the Tx timestamp
value read is requested through virtchnl message. At the end, the Tx
timestamp value is extended to 64-bit and provided back to the skb.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Co-developed-by: Josh Hay <joshua.a.hay@intel.com>
Signed-off-by: Josh Hay <joshua.a.hay@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
PTP clock configuration operations - set time, adjust time and adjust
frequency are required to control the clock and maintain synchronization
process.
Extend get PTP capabilities function to request for the clock adjustments
and add functions to enable these actions using dedicated virtchnl
messages.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When the access to read PTP clock is specified as mailbox, the driver
needs to send virtchnl message to perform PTP actions. Message is sent
using idpf_mbq_opc_send_msg_to_peer_drv mailbox opcode, with the parameters
received during PTP capabilities negotiation.
Add functions to recognize PTP messages, move them to dedicated secondary
mailbox, read the PTP clock time and cross timestamp using mailbox
messages.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
PTP capabilities are negotiated using virtchnl commands. There are two
available modes of the PTP support: direct and mailbox. When the direct
access to PTP resources is negotiated, virtchnl messages returns a set
of registers that allow read/write directly. When the mailbox access to
PTP resources is negotiated, virtchnl messages are used to access
PTP clock and to read the timestamp values.
Virtchnl API covers both modes and exposes a set of PTP capabilities.
Using virtchnl API, the driver recognizes also HW abilities - maximum
adjustment of the clock and the basic increment value.
Additionally, API allows to configure the secondary mailbox, dedicated
exclusively for PTP purposes.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
