__nvmem_device_put() is wrapped by nvmem_device_put() but there's no
extra functionality offered by the latter so just fold one into the
other. There's still the corresponding __nvmem_device_get() so in order
to keep things symmetrical: rename it to nvmem_device_match() to better
reflect its functionality and not confuse users by its presence in the
absence of the similarly prefixed put() counterpart.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260729094647.111468-6-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__nvmem_reg_read/write() currently return -EINVAL if the relevant
callback is not present. User-space helpers again check the presence
of the callbacks to see if they should return -EPERM.
Ahead of adding SRCU synchronization: change the error code returned to
in-kernel users to -EOPNOTSUPP which is more indicative of the actual
reason for the failure.
Remove the checks from the sysfs attribute callbacks as these are not
visible without the required callbacks.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260729094647.111468-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Newer DSP firmware implements a PD (Protection Domain) notification
framework that sends PD state notifications upon request. The PD exit
notification is unconditionally sent by the DSP with a fixed sentinel
0xABCDABCD in the context field.
fastrpc_rpmsg_callback() treats every inbound message as an invoke
response, so the sentinel is masked and shifted like any real response
((0xABCDABCD & 0xFF0) >> 4 == 188) and looked up in the channel's
context idr.
This is not merely cosmetic. In the common case idr slot 188 is empty,
the lookup fails, and the driver only logs a spurious "No context ID
matches response" error on every teardown. But the context idr is shared
by every protection domain and the listener thread on the channel and is
filled cyclically over [1, FASTRPC_CTX_MAX]. If slot 188 holds a live
context when the sentinel arrives, the sentinel's return value is written
into that unrelated in-flight invocation and it is completed early.
Since neither the fastrpc library nor the driver supports the DSP PD
notification framework, it is safe to drop the PD exit notification
before it is ever turned into a context lookup. This removes both the
log spam and the mis-completion race. A genuine response can never be
masked: a real context is (idr_index << 4) | pd (at most 0xFF3) and
can never equal the sentinel.
Assisted-by: Claude:claude-opus-4-8
Reviewed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260729094352.111065-11-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For any remote call to DSP, after sending an invocation message,
the fastRPC driver waits for a glink response, during which the CPU
can enter low power modes. This adds latency to the fastRPC call
due to CPU wakeup and scheduling overhead. Add polling mode support
where the fastRPC driver polls a shared memory location for
completion after sending the invocation, avoiding CPU wakeup and
scheduling latency and reducing fastRPC overhead. If the poll times
out, the call falls back to the normal interrupt/glink-based
completion path.
Poll mode is only applied to dynamic modules running in a user PD
(handle > FASTRPC_MAX_STATIC_HANDLE), since static/root-PD handles
are not expected to benefit from, or require, this optimization.
Support is advertised per SoC via fastrpc_soc_data, with a closed
exception list for older platforms whose DSP firmware is known to
support polling but which otherwise use the default soc_data.
Poll mode can be enabled by userspace via the FASTRPC_IOCTL_SET_OPTION
ioctl with the FASTRPC_POLL_MODE request id.
Since context IDs (ctxid) are allocated from a fixed-size, per-channel
cyclic IDR shared by all processes on a DSP, a context ID can be
recycled for a new request soon after it is freed. In poll mode the
context can be considered complete (and released) as soon as the poll
memory is updated, while the corresponding glink COMPLETE response
from the DSP may still be in flight. If that response arrives after
the ctxid has been reused, it would otherwise match the new context
and incorrectly signal completion for it while the DSP may still be
operating on the new context's buffers. To prevent this, embed a
monotonically increasing per-channel sequence number in the unused
upper bits of the ctxid/message context and validate it in the
rpmsg callback, dropping any response whose sequence number does not
match the current owner of that ctxid slot.
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260729094352.111065-8-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current FastRPC context uses a 12-bit mask:
[ID(8 bits)][PD type(4 bits)] = GENMASK(11, 4)
This works for normal calls but fails for DSP polling mode.
Polling mode expects a 16-bit layout:
[15:8] = context ID (8 bits)
[7:5] = reserved
[4] = async mode bit
[3:0] = PD type (4 bits)
If async bit (bit 4) is set, DSP disables polling. With current
mask, odd IDs can set this bit, causing DSP to skip poll updates.
Update FASTRPC_CTXID_MASK to GENMASK(15, 8) so IDs occupy upper
byte and lower byte is left for DSP flags and PD type.
Reserved bits remain unused. This change is compatible with
polling mode and does not break non-polling behavior.
Bit layout:
[15:8] = CCCCCCCC (context ID)
[7:5] = xxx (reserved)
[4] = A (async mode)
[3:0] = PPPP (PD type)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260729094352.111065-7-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dev_err() and dev_info() were called while holding a spinlock with
IRQs disabled, which is incorrect as printk can be slow and should
not be called in atomic context.
Move the dev_err() for the FASTRPC_MAX_SESSIONS check to after the
spinlock is released, and save the return value of of_property_read_u32()
to print dev_info() after the lock is dropped. Minor variable style
correction in probe function.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260729094352.111065-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add asynchronous Stratix 10 service layer support for hardware monitor
temperature and voltage read commands in stratix10_svc_async_send() and
stratix10_svc_async_prepare_response().
Register a socfpga-hwmon platform device from the service layer driver
when hardware monitor support is enabled, similar to the RSU device.
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Signed-off-by: Tze Yee Ng <tze.yee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
We need the char/misc fixes AND this resolves two merge conflicts in:
drivers/android/binder/thread.rs
drivers/misc/nsm.c
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull vfs fixes from Christian Brauner:
- vfs: Preserve the ACL_DONT_CACHE state in forget_cached_acl().
ACL_DONT_CACHE is meant to be a permanent opt-out from ACL caching
which FUSE relies on for servers that don't negotiate FUSE_POSIX_ACL.
The helper replaced it with ACL_NOT_CACHED, silently re-enabling the
cache, and as fuse doesn't invalidate the cache for such servers a
properly timed get_acl() returned stale ACLs. Comes with a fuse
selftest reproducing this.
- pidfs:
- Preserve PIDFD_THREAD when a thread pidfd is reopened via
open_by_handle_at(). PIDFD_THREAD shares the O_EXCL bit which
do_dentry_open() strips after the flags have been validated, so
the reopened pidfd silently became a process pidfd. Comes with a
selftest.
- Add a pidfs_dentry_open() helper so the regular pidfd allocation
path and the file handle path share the code that forces O_RDWR
and reapplies the pidfd flags that do_dentry_open() strips.
- Handle FS_IOC32_GETVERSION in the compat ioctl path.
- Make pidfs_ino_lock static.
- iomap:
- Fix the block range calculation in ifs_clear_range_dirty() so a
partial clear doesn't drop the dirty state of blocks the range
only partially covers.
- Support invalidating partial folios so a partial truncate or hole
punch with blocksize < foliosize doesn't leave stale dirty bits
behind.
- Only set did_zero when iomap_zero_iter() actually zeroed
something.
- Guard ifs_set_range_dirty() and ifs_set_range_uptodate() against
zero-length ranges where the unsigned last-block calculation
underflows and bitmap_set() writes far beyond the ifs->state
allocation.
- Don't merge ioends with different io_private values as the merge
could leak or corrupt the private data of the individual ioends.
- exec:
- Raise bprm->have_execfd only once the binfmt_misc interpreter has
actually been opened. The flag was set as soon as a matching 'O'
or 'C' entry was found. If the interpreter open failed with
ENOEXEC the exec fell through to the next binary format with
have_execfd raised but no executable staged and begin_new_exec()
NULL derefed past the point of no return.
- Fix an unsigned loop counter wrap in transfer_args_to_stack() on
nommu. An overlong argument or environment string pushes bprm->p
below PAGE_SIZE, the stop index becomes zero, and the loop never
terminates, wrapping its counter and copying garbage from in
front of the page array into the new process stack.
- Make binfmt_elf_fdpic only honour the first PT_INTERP like
binfmt_elf does. Each additional PT_INTERP overwrote the previous
interpreter, leaking the name allocation and the interpreter file
reference together with the write denial open_exec() took,
leaving the file unwritable for as long as the system runs.
- overlayfs:
- Compare the full escaped xattr prefix including the trailing dot.
An xattr like "trusted.overlay.overlayfoo" was misclassified as
an escaped overlay xattr.
- Check read access to the copy_file_range() source with the
source's mounter credentials.
- super: Thawing a filesystem whose block device was frozen with
bdev_freeze() deadlocked. Dropping the last block layer freeze
reference from under s_umount ends up in fs_bdev_thaw() which
reacquires s_umount on the same task. Pin the superblock with an
active reference instead and call bdev_thaw() without holding
s_umount.
- procfs: Return EACCES instead of success when the ptrace access check
for namespace links fails.
- afs: Use afs_dir_get_block() rather than afs_dir_find_block() for
block 0 in afs_edit_dir_remove(), matching afs_edit_dir_add().
- Push the memcg gating of ->nr_cached_objects() down into the btrfs
and shmem callbacks instead of skipping every callback during
non-root memcg reclaim. The blanket check short-circuited XFS whose
inode reclaim hook is intentionally driven from per-memcg contexts to
free memcg-charged slab.
- eventpoll: Pin files while checking reverse paths.
Since struct file became SLAB_TYPESAFE_BY_RCU a concurrent close
could free and recycle the file under the check which then took and
dropped the f_lock of whatever live file now occupies that slot.
* tag 'vfs-7.2-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
super: fix emergency thaw deadlock on frozen block devices
pidfs: make pidfs_ino_lock static
eventpoll: pin files while checking reverse paths
fs: push nr_cached_objects memcg gating into individual filesystems
afs: Fix afs_edit_dir_remove() to get, not find, block 0
iomap: prevent ioend merge when io_private differs
iomap: add comments for ifs_clear/set_range_dirty()
iomap: fix out-of-bounds bitmap_set() with zero-length range
iomap: fix incorrect did_zero setting in iomap_zero_iter()
iomap: support invalidating partial folios
iomap: correct the range of a partial dirty clear
fs/super: fix emergency thaw double-unlock of s_umount
pidfs: handle FS_IOC32_GETVERSION in compat ioctl
ovl: check access to copy_file_range source with src mounter creds
proc: Fix broken error paths for namespace links
pidfs: add pidfs_dentry_open() helper
selftests/pidfd: check PIDFD_THREAD survives open_by_handle_at()
pidfs: preserve thread pidfds reopened by file handle
ovl: fix trusted xattr escape prefix matching
selftests/fuse: add ACL_DONT_CACHE regression test
...
Pull spi fixes from Mark Brown:
"Just a couple of small bits for the SpacemiT driver - one small fix,
and a new compatible in the DT binding"
* tag 'spi-fix-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: spacemit: add K3 SPI compatible
spi: spacemit: Correct TX FIFO slot calculation
Pull regulator fixes from Mark Brown:
"One driver specific fix where one of the MediaTek drivers duplicated
some core code buggily, and a core fix for an ordering issue on
startup where we could end up configuring a voltage outside of
constraints due to the order in which we applied constraints"
* tag 'regulator-fix-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: clamp voltage constraints before applying apply_uV
regulator: mt6358: use regmap helper to read fixed LDO calibration
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc/etc driver fixes for 7.2-rc5 that
resolve a bunch of different reported issues. Included in here are:
- rust_binder error message reporting fix
- stratix10-svc firmware driver fixes
- mei driver fix
- intel_th hardware tracing driver fix
- comedi driver fix
- uio_hv_generic driver fix
- ntsync selftest fix
- nsm misc driver fix
- some MAINTAINER file updates
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: Update wine-devel list address
rust_binder: only print failure if error has source
intel_th: fix MSC output device reference leak
misc: nsm: pin the module while the device is open
mei: bus: access mei_device under device_lock on cleanup
misc: nsm: only unlock nsm_dev on post-lock error paths
selftests: ntsync: correct CONFIG_NTSYNC name
comedi: comedi_parport: deal with premature interrupt
uio_hv_generic: Bind to FCopy device by default
MAINTAINERS: Add Greg Kroah-Hartman to GPIB
firmware: stratix10-svc: fix teardown order in remove to prevent race
firmware: stratix10-svc: handle NO_RESPONSE in async poll
firmware: stratix10-svc: fix FCS SMC call kernel-doc
firmware: stratix10-svc: fix memory leaks and list corruption bugs
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 7.2-rc5. They both resolve
some reported bugs in the rtl8723bs staging driver and have been in
linux-next for over a week with no reported issues"
* tag 'staging-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie()
staging: rtl8723bs: fix inverted HT40 secondary channel offset
Pull serial driver fixes from Greg KH:
"Here are two small serial driver fixes for 7.2-rc5. They are:
- sc16is7xx get_direction() callback fix, which resolves a
user-triggerable warning in the driver
- NULL pointer dereference on some platforms using the 8250_mid
serial driver
Both have been in linux-next for over a week with no reported issues"
* tag 'tty-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sc16is7xx: implement gpio get_direction() callback
serial: 8250_mid: Fix NULL function pointer dereference on DNV/ICX-D/SNR platforms
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device quirks and ids:
- usb storage quirk added
- new usb serial device ids added
- usb-serial device name leak and other bug fixes
- small xhci driver fixes
- normal batch of typec driver fixes for reported issues
- usb-atm much-reported-by-syzbot fix for firmware download races
- sysfs BOS device removal race fix
- lots of usb gadget driver fixes for reported issues
- other small USB driver fixes for other reported problems
All of these have been in linux-next this past week, many of them much
longer"
* tag 'usb-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (30 commits)
usb: typec: ucsi: Correct teardown ordering in ucsi_init() error path
USB: serial: io_edgeport: cap received transmit credits
USB: serial: option: add TDTECH MT5710-CN
USB: serial: io_ti: reject oversized boot-mode firmware
USB: serial: mxuport: validate firmware header size
usb: atm: ueagle-atm: reject descriptors that confuse probe and disconnect
usb: typec: ucsi: yoga_c630: Remove redundant duplicate altmode handling
usb: typec: ucsi: Add duplicate detection to nvidia registration path
usb: typec: ucsi: Detect and skip duplicate altmodes from buggy firmware
usb: gadget: dummy_hcd: prevent fifo_req reuse during giveback
usb: chipidea: fix usage_count leak when autosuspend_delay is negative
usb: core: sysfs: add lock to bos_descriptors_read()
usb: musb: omap2430: Do not put borrowed of_node in probe
usb: core: port: Deattach Type-C connector on component unbind
USB: storage: add NO_ATA_1X quirk for Longmai USB Key
USB: serial: ftdi_sio: add support for E+H FXA291
USB: serial: keyspan_pda: fix data loss on receive throttling
usb: gadget: printer: fix infinite loop in printer_read()
usb: gadget: f_midi: cancel pending IN work before freeing the midi object
usb: gadget: udc: bdc: free IRQ and drain func_wake_notify before teardown
...
Pull tracing fixes from Steven Rostedt:
- Move rb_desc->nr_page_va before updating dynamic array
The rb_descr->page_va is a dynamic array counted by nr_page_va. But
the updating of the page_va[] is done before the nr_page_va is
incremented causing a build with CONFIG_UBSAN_BOUNDS to flag it as an
overflow.
Move the increment of the counted by value before the array element
is updated.
- Propagate errors from remote event bulk updates
The return value of trace_remote_enable_event() was not being checked
by remote_events_dir_enable_write() where it would silently fail.
Have it check the return value and propagate that back up to user
space.
- Fix resource leak on mmiotrace trace_pipe close
The mmiotrace tracer was created in 2008 before the trace_pipe had a
close callback to allow tracers to do clean up from trace_pipe open.
The trace_pipe close cleanup callback was added in 2009 but the
mmiotrace tracer was not updated. It had a hack to do the cleanup in
the read call, where it may leak if user space did not read the
entire buffer.
Add a callback to mmiotrace trace_pipe close do to the cleanup
properly.
- Fix a possible NULL pointer dereference in the mmiotrace tracer
If the mmio_pipe_open() fails to find a PCI device, it will set the
hiter->dev pointer to NULL. The read function will blindly
dereference that pointer. Fix the read call to check to see if that
pointer is populated before dereferencing it.
- Fix union collision of module and refcnt for dynamic events
In 'struct trace_event_call', the 'module' pointer and the 'refcnt'
atomic variable share the same memory space in a union. The filter on
module logic only checked if the 'module' was set to determine if the
event belonged to the module. As dynamic events are always builtin,
it doesn't need the 'module' field of the structure and used a
refcount. But the module filtering logic would then mistaken these
dynamic events as a module and call module_name(event->module) on it.
Add a check to see if the event is a dynamic event and if so, do not
check it for being part of the given module.
- Reset the top level buffer in selftests before running instances
The ftracetest selftest initializes each instance before executing
the tests. But it does not reset the top level buffer. Dynamic events
are only added and removed by the top level so any left over dynamic
events will not be removed by the reset in the instances.
Left over dynamic events can cause the tests to incorrectly fail.
Reset the top level buffer before running the instances.
- Make the context_switch counter 64 bit
The code to read user space for a system call trace event or for a
trace_marker will disable migration, enable preemption, read user
space into a per CPU buffer, disable preemption and enable migration
again. It checks if the per CPU context switch counter to see if it
changed, and if it did not, it would know that the per CPU buffer was
not touched by another task.
But the save counter was 32 bit and it would compare it to the 64 bit
context_switch variable. A long running system could have the
context_switch variable greater that 1<<32 in which case the compare
will always fail. The compare will promote the 32 bit int saved value
to 64 bit and compare it to the full 64 bit counter. Since the top 32
bits of the saved value was zero, it would never match.
- Fix a use-after-free of the event_enable trigger
The event_enable trigger allows for enabling one event when another
event is triggered. When the trigger is removed, it must go through a
synchronization phase to make sure it is not triggered again. The
trigger itself is delayed by the "bulk delay" logic that was recently
added. But the code that frees the event_enable data used to rely on
the trigger code to do the synchronization. Now that the code uses
the call RCU functions (and a workqueue), that delay no longer is
there.
Add a callback private_data_free() function that allows triggers to
clean up data after the synchronization phase has completed.
- Move the module_ref counter into the delay callback
Since an event of the event_enable trigger can enable an event for a
module, it ups the module ref count for that event's module. This
prevents the event from trying to enable an event that no longer
exists and cause a use-after-free bug.
The ref counter was set back down when the trigger was removed but
not after thy synchronization phase. This could lead to the module
data being accessed after module was unloaded.
Move the module ref decrement into the private_data_free() callback
of the event_enable trigger.
- Add mutex to protect parser in ftrace filtering
The set_ftrace_filter file uses a parsing descriptor that is
allocated at open and modified by writes. If multiple threads were to
write to the descriptor at the same time, it can corrupt the parser.
Add a mutex around the modifications of the parser descriptor.
- Fix possible corruption in perf syscall tracing
The perf system call trace events can now read user space. To do so,
the reads of user space enable preemption and disables it again.
During this time that preemption is enabled, the task can migrate.
The perf event list head is assigned via a per CPU pointer. It is
done before the user space part is called. If the user space reading
migrates the task to another CPU, then the head pointer is no longer
valid.
Re-assign the head pointer after the reading of user space to keep it
using the correct data.
* tag 'trace-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: perf: Fix stale head for perf syscall tracing
ftrace: Add global mutex to serialize trace_parser access
tracing: Delay module ref count for "enable_event" trigger
tracing: Fix use-after-free freeing trigger private data
tracing: Fix context switch counter truncation
selftests/ftrace: Reset triggers at top level before instance loop
tracing: Fix union collision of module and refcnt for dynamic events
tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev
tracing: Fix resource leak on mmiotrace trace_pipe close
tracing: Propagate errors from remote event bulk updates
tracing/remotes: Fix page_va[] access before counter update in trace_remote_alloc_buffer()
Pull m68knommu fix from Greg Ungerer:
- fix broken local SoC IO accesses for ColdFire
* tag 'm68knommu-fixes-on-top-off-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire: fix breakage of missed IO access update
Pull x86 fix from Ingo Molnar:
- Disable jump/lookup tables in the x86 boot decompressor code
a bit more widely, because newer versions of LLVM started
optimizing it a bit better and introduced run-time relocations
in PIE code (Nathan Chancellor)
* tag 'x86-urgent-2026-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Disable jump tables
do_thaw_all_callback() calls bdev_thaw() while holding sb->s_umount
exclusively. If the block device was frozen via bdev_freeze() dropping
the last block layer freeze reference calls fs_bdev_thaw() which
reacquires s_umount:
do_thaw_all_callback(sb)
super_lock_excl(sb) # holds sb->s_umount
bdev_thaw(sb->s_bdev)
mutex_lock(&bdev->bd_fsfreeze_mutex)
# bd_fsfreeze_count drops 1 -> 0
bd_holder_ops->thaw == fs_bdev_thaw
get_bdev_super(bdev)
bdev_super_lock(bdev, true)
super_lock(sb, true)
down_write(&sb->s_umount) # same task: deadlock
The emergency thaw worker deadlocks against itself holding both
s_umount and bd_fsfreeze_mutex. That fscks any subsequent unmount,
freeze, or thaw of that filesystem and block device.
[ 81.878470] sysrq: Show Blocked State
[ 81.880140] task:kworker/0:1 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208060 flags:0x00080000
[ 81.884876] Workqueue: events do_thaw_all
[ 81.886656] Call Trace:
[ 81.887759] <TASK>
[ 81.888763] __schedule+0x579/0x1420
[ 81.890372] schedule+0x3a/0x100
[ 81.891794] schedule_preempt_disabled+0x15/0x30
[ 81.893848] rwsem_down_write_slowpath+0x1ea/0x900
[ 81.895191] ? __pfx_do_thaw_all_callback+0x10/0x10
[ 81.896528] down_write+0xbd/0xc0
[ 81.897505] super_lock+0x91/0x180
[ 81.898457] ? __mutex_lock+0xa99/0x1140
[ 81.900748] ? __mutex_unlock_slowpath+0x1f/0x400
[ 81.902069] bdev_super_lock+0x5b/0x150
[ 81.903132] get_bdev_super+0x10/0x60
[ 81.904042] fs_bdev_thaw+0x23/0xf0
[ 81.904755] bdev_thaw+0x82/0x100
[ 81.905484] do_thaw_all_callback+0x2c/0x50
[ 81.906298] __iterate_supers+0x5d/0x130
[ 81.907067] do_thaw_all+0x20/0x40
[ 81.907739] process_one_work+0x206/0x5e0
[ 81.908545] worker_thread+0x1e2/0x3c0
[ 81.909339] ? __pfx_worker_thread+0x10/0x10
[ 81.910171] kthread+0xf4/0x130
[ 81.910799] ? __pfx_kthread+0x10/0x10
[ 81.911528] ret_from_fork+0x2e2/0x3b0
[ 81.912259] ? __pfx_kthread+0x10/0x10
[ 81.913010] ret_from_fork_asm+0x1a/0x30
[ 81.913806] </TASK>
bdev_super_lock() even documents the violated requirement with
lockdep_assert_not_held(&sb->s_umount).
Acquiring bd_fsfreeze_mutex under s_umount also inverts the
bd_fsfreeze_mutex vs. s_umount ordering established by
bdev_{freeze,thaw}() and can thus ABBA against a concurrent block-layer
freeze even when the recursive path isn't hit.
Fix this by not holding s_umount around the bdev_thaw() loop at all. Pin
the superblock with an active reference instead as
filesystems_freeze_callback() does. The active reference keeps the
superblock from being shut down and so ->s_bdev stays valid without
holding s_umount. The block-layer-held freeze is dropped by
fs_bdev_thaw() with FREEZE_MAY_NEST | FREEZE_HOLDER_USERSPACE exactly as
a regular unfreeze would and thaw_super_locked() handles
filesystem-level freezes as before.
The emergency thaw path has deadlocked like this in one form or
another for a long long time but the current exclusively-held
shape dates back to commit [1] where thaw_bdev() already ended in
thaw_super() with s_umount held by do_thaw_all_callback().
Fixes: 08fdc8a013 ("buffer.c: call thaw_super during emergency thaw") [1]
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260723-work-super-emergency_thaw-v1-1-7c315c600245@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- 'zerocopy' crates: update to v0.8.54 to fix a modpost error under
'CONFIG_CC_OPTIMIZE_FOR_SIZE=y'.
There are actually two updates in the PR: the one to v0.8.52 is
fairly large and was originally not intended for a fixes PR, but the
actual fix landed in the v0.8.54 one. Thus I included both here.
The v0.8.52 update includes two things upstream added for us:
'--cfg no_fp_fmt_parse' to avoid a local workaround, and the new
'most_traits' feature.
The good news is that, after these updates, the delta with upstream
is now trivial: only an identifier prefix change and the SPDX
parentheses.
- Fix an objtool warning by adding one more 'noreturn' function for
Rust 1.99.0 (expected 2026-10-01).
- Clean up new 'semicolon_in_expressions_from_macros' lint errors for
Rust 1.99.0 (expected 2026-10-01). The lint can be allowed, but it
will be a hard error at some point in the future anyway, so clean it
up now.
- Locally allow new 'suspicious_runtime_symbol_definitions' lint for
Rust 1.98.0 (expected 2026-08-20).
- Globally allow 'clippy::unwrap_or_default' lint since it relies on
optimizations -- under 'CONFIG_CC_OPTIMIZE_FOR_SIZE=y' it does not
work well.
'kernel' crate:
- 'time' module: fix 'Delta::as_micros_ceil()' to round negative values
correctly"
* tag 'rust-fixes-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: time: fix as_micros_ceil() to round correctly for negative Delta
rust: device: avoid trailing ; in printing macros
objtool/rust: add one more `noreturn` Rust function for Rust 1.99.0
rust: zerocopy: update to v0.8.54
rust: zerocopy: update to v0.8.52
rust: allow `clippy::unwrap_or_default` globally
rust: allow `suspicious_runtime_symbol_definitions` lint for Rust >= 1.98
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Update header copies of kernel headers, including const.h, fs.h,
perf_event.h, gfp_types.h, kvm.h, cpufeatures.h, rtnetlink.hp,
msr-index.h, drm.h and socket.h
- Add some build files related to BPF skels to .gitignore
* tag 'perf-tools-fixes-for-v7.2-1-2026-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools headers: Sync KVM headers with the kernel sources
tools headers: Sync UAPI linux/fs.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers: Sync UAPI drm/drm.h with kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers: Sync linux/gfp_types.h with the kernel sources
tools headers UAPI: Sync linux/rtnetlink.h with the kernel sources
tools headers UAPI: Sync linux/const.h with the kernel sources
perf bench bpf: Add missing .gitignore file
Pull firewire fix from Takashi Sakamoto:
"Fix a bug in unit driver for RFC 2734 IPv4 over IEEE 1394.
The driver failed to reassemble a complete datagram when it was stored
across multiple buffer ranges in the list. Ruoyu Wang reported and
fixed it"
* tag 'firewire-fixes-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: net: Fix fragmented datagram reassembly
Pull LoongArch fixes from Huacai Chen:
- fix build warnings and errors
- move jump_label_init() before parse_early_param()
- retrieve CPU package ID from PPTT when available
- fix some bugs kgdb, BPF JIT and laptop platform driver bugs
* tag 'loongarch-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Explicitly reset bl_powered state when suspend
platform/loongarch: laptop: Stop setting acpi_device_class()
LoongArch: BPF: Fix memory leak in bpf_jit_free()
LoongArch: BPF: Zero-extend signed ALU32 div/mod results
LoongArch: Fix oops during single-step debugging
LoongArch: Fix address space mismatch in kexec command line lookup
LoongArch: Retrieve CPU package ID from PPTT when available
LoongArch: Move jump_label_init() before parse_early_param()
LoongArch: Fix build errors due to wrong instructions for 32BIT
LoongArch: Increase TASK_STRUCT_OFFSET up to 2040 for 32BIT
Pull block fixes from Jens Axboe:
- Fix a ublk recovery hang, where END_USER_RECOVERY without a
successful START_USER_RECOVERY could be satisfied by a stale
completion latch
- Fix a stack out-of-bounds read in the CDROMVOLCTRL ioctl
- MAINTAINERS email address update for Roger Pau Monne
* tag 'block-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
MAINTAINERS: update my email address
cdrom: fix stack out-of-bounds read in CDROMVOLCTRL
ublk: wait on ublk_dev_ready() instead of ub->completion
Pull io_uring fixes from Jens Axboe:
- Fix a missing ERESTARTSYS conversion in the read paths, which got
messed up back when some code consolidation was done for read
multishot support
- zcrx UAPI rename, dropping the abbreviated "notif" naming in favor of
"event" for consistency and to be less ambiguous for users. This was
added for 7.2, so let's rename it while we still can. No functional
or code changes, just a strict rename
* tag 'io_uring-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/zcrx: rename notif to event
io_uring/zcrx: rename ZCRX_NOTIF_NO_BUFFERS
io_uring/zcrx: drop "notif" from stats struct names
io_uring/rw: fix missing ERESTARTSYS conversion in read paths
In ftrace, the trace_parser structure is allocated and initialized when
a trace file is opened, and is subsequently used across write and release
handlers to parse user input.
The affected handler paths and their specific functions are:
- Open paths: ftrace_regex_open(), ftrace_graph_open()
- Write paths: ftrace_regex_write(), ftrace_graph_write()
- Release paths: ftrace_regex_release(), ftrace_graph_release()
If userspace opens a trace file descriptor and shares it across multiple
threads, concurrent write calls will race on the parser's internal state,
specifically the 'idx', 'cont', and 'buffer' fields, leading to corrupted
input or undefined behavior.
Fix this by adding a global mutex, parser_lock, to serialize all access
to trace_parser across write and release paths, preventing concurrent
corruption of parser state.
Fixes: e704eff3ff ("ftrace: Have set_graph_function handle multiple functions in one write")
Fixes: 689fd8b65d ("tracing: trace parser support for function and graph")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260725024721.1983675-1-wutengda@huaweicloud.com
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull smb server fixes from Steve French:
"This contains eight ksmbd fixes covering POSIX ACL handling, SMB
signing enforcement, DACL parsing and construction hardening, session
lifetime handling, and validation of malformed transform and
compressed SMB2 requests:
- preserve inherited POSIX ACL mask when creating objects.
- enforce the session signing requirement for plaintext SMB requests.
- harden DACL/ACE processing against size overflows, incomplete ACE
copies, and undersized SIDs.
- defer teardown of a previous session until NTLM authentication
succeeds.
- reject undersized encryption-transform and decompressed SMB2
requests before they can reach normal SMB2 request processing"
* tag 'v7.2-rc4-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: reject undersized decompressed SMB2 requests
ksmbd: validate minimum PDU size for transform requests
ksmbd: defer destroy_previous_session() until after NTLM authentication
ksmbd: validate ACE size against SID sub-authorities
ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL
ksmbd: bound DACL dedup walk to copied ACEs
ksmbd: enforce signing required by the session
ksmbd: preserve VFS inherited POSIX ACL mask
Pull bpf fixes from Eduard Zingerman:
- Fix tcp_bpf_sendmsg() error path mistaking a concurrently-freed
sk_psock->cork for the local temporary message and freeing it again
(Chengfeng Ye)
- Reject passing scalar NULL to nonnull arg of a global subprog.
Previously the verifier did not account for the cases directly
passing scalars to a global subprog, e.g.: 'global_func(0);' would
pass even if 'global_func' argument was marked nonnull (Amery Hung)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg()
selftests/bpf: Test passing scalar NULL to nonnull global subprog
bpf: Reject passing scalar NULL to nonnull arg of a global subprog
Triggers are now delayed from freeing, but can still be triggered until
after the RCU grace period has ended. The freeing of the enable_event data
is put into the private_data_free() callback, but the put of the module
refcount is done immediately.
It is possible that if a module is removed that has an event that would
enable (or disable) it is still active, it can read the data of the module
after it is removed causing a use-after-free bug.
Move the trace_event_put_ref() that releases the module into the delayed
callback so that the module can not be removed until any reference to its
events are finished.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260724132415.1b5005db@gandalf.local.home
Reported-by: Sashiko <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260724030523.19081-1-devnexen%40gmail.com
Fixes: 61d445af0a ("tracing: Add bulk garbage collection of freeing event_trigger_data")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 61d445af0a ("tracing: Add bulk garbage collection of freeing
event_trigger_data") moved the kfree() of event_trigger_data to a kthread
that runs tracepoint_synchronize_unregister() before freeing. That removed
the synchronization the trigger .free callbacks used to get implicitly and
inline from trigger_data_free().
event_hist_trigger_free(), event_hist_trigger_named_free() and
event_enable_trigger_free() free their satellite data (hist_data, cmd_ops,
enable_data) right after trigger_data_free() returns. With the
synchronization now deferred to the kthread, a concurrent tracepoint
handler can still reach that data through the list_del_rcu()'d trigger,
causing a use-after-free.
The histogram teardown must stay synchronous: remove_hist_vars() and
unregister_field_var_hists() have to detach a synthetic event from the
histogram before the trigger-removal write returns, otherwise a following
command races in and the synthetic-event removal fails with -EBUSY, as the
trigger-synthetic-eprobe.tc selftest catches. Make those callbacks wait
with the correct barrier - tracepoint_synchronize_unregister(), matching
the free kthread - before freeing.
The enable trigger has no such synchronous requirement, and a blocking
synchronize there would re-serialize the path that commit deliberately
deferred. Give it an optional private_data_free() callback that the free
kthread runs after its grace period, and free enable_data from there.
Link: https://patch.msgid.link/20260724030523.19081-1-devnexen@gmail.com
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Fixes: 61d445af0a ("tracing: Add bulk garbage collection of freeing event_trigger_data")
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tcp_bpf_sendmsg() keeps msg_tx across sk_stream_wait_memory(), which
drops and reacquires the socket lock. Its error path tries to decide
whether msg_tx names the local temporary message by comparing it with
the current value of psock->cork.
This comparison is unsafe when two threads send on the same socket:
Thread A Thread B
msg_tx = psock->cork
sk_msg_alloc() fails
sk_stream_wait_memory()
releases the socket lock acquires the socket lock
completes the cork
psock->cork = NULL
frees the cork
reacquires the socket lock
msg_tx != psock->cork
sk_msg_free(msg_tx)
The stale cork is therefore mistaken for the local temporary message
and freed again. KASAN reported:
BUG: KASAN: slab-use-after-free in sk_msg_free+0x49/0x50
Read of size 4 at addr ffff88810c908800 by task poc/90
Call Trace:
sk_msg_free+0x49/0x50
tcp_bpf_sendmsg+0x14f5/0x1cc0
__sys_sendto+0x32c/0x3a0
__x64_sys_sendto+0xdb/0x1b0
Allocated by task 89:
__kasan_kmalloc+0x8f/0xa0
tcp_bpf_sendmsg+0x16b3/0x1cc0
Freed by task 91:
__kasan_slab_free+0x43/0x70
kfree+0x131/0x3c0
tcp_bpf_sendmsg+0xec3/0x1cc0
msg_tx can only name the stack-local tmp or the shared cork. Check for
tmp directly so a changed psock->cork cannot turn a shared message into
an apparent local one.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/87fr18lmzo.fsf%40cloudflare.com/
Link: https://lore.kernel.org/netdev/20260719161630.2901208-1-nicoyip.dev%40gmail.com/ [v1]
Link: https://patch.msgid.link/20260724103856.3399001-1-nicoyip.dev@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Pull drm fixes from Dave Airlie:
"Weekly drm pull request, small and scattered seems to be the new
normal, the ttm change is probably the largest, with xe being the
most. Alex was out this week so amdgpu is smaller and only has some
urgent fixes.
MAINTAINERS:
- update mailmap address
ttm:
- backup pages using correct order
gpusvm:
- fix mm leak on eviction
- properly zero page array in mm scanning
tests:
- fix dma mask errors in tests
panel:
- fix dependency issues
- ilitek-ili9881c - fix probing
i915:
- Remove DP_EDP_BACKLIGHT_AUX_ENABLE_CAP check for DPCD backlight
xe:
- Skip invalidation for purgeable state updates
- Add drm_dev guards when detaching CCS read / write buffers
- Alloc per domain unique i2c id
- Fix SVM leak on resv obj alloc failure in xe_vm_create
amdgpu:
- Fix a backport mistake for dm_gpureset_toggle_interrupts()
- Fix a failure on flip-done timeouts for mode1 reset
appletbdrm:
- fix issue in damage handling
amdxdna:
- fix command timeout race
imagination:
- fix gpu vm locking
vc4:
- prevent trusted bo from being mapped again
- prevent timer rearm on shutdown
v3d:
- fix NULL deref in unbind
- idle AXI before clock disable on suspend
- use proper GMP access for newer hw
vmwgfx:
- validate shader array size
ethosu:
- fix length calculations
- handle internal chaining buffers
gma500:
- return errors from HDMI i2c reads"
* tag 'drm-fixes-2026-07-25' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
drm/amd/display: Fix missing DCE check in dm_gpureset_toggle_interrupts()
drm/amd/display: Fix flip-done timeouts on mode1 reset
Revert "drm/pagemap: Guard HPAGE_PMD_ORDER use with CONFIG_ARCH_ENABLE_THP_MIGRATION"
drm/vc4: Shut down BO cache timer before teardown
drm/tests: shmem: Set DMA mask to 64-bit in drm_gem_shmem
drm/xe/vm: Fix SVM leak on resv obj alloc failure in xe_vm_create()
drm/xe/i2c: Allow per domain unique id
drm/gma500: return errors from Oaktrail HDMI I2C reads
drm/vc4: hvs/v3d: Fix null dereference in unbind
drm/panel: fix unmet dependency bug for DRM_PANEL_HIMAX_HX83121A
drm/panel: s6e3ha8: fix unmet dependency on DRM_DISPLAY_HELPER
drm/panel: ilitek-ili9882t: fix unmet dependency for DRM_PANEL_ILITEK_ILI9882T
drm/panel: ilitek-ili9881c: do not fail probe if iovcc is absent
drm/v3d: Idle AXI transactions before disabling the clock on suspend
drm/v3d: Reach the GMP through the hub registers on V3D 7.x
mailmap: Update Maíra Canal's email address
drm/pagemap: Guard HPAGE_PMD_ORDER use with CONFIG_ARCH_ENABLE_THP_MIGRATION
drm/pagemap: Clear driver-provided PFNs from migration PFN array
drm/xe/vf: Add drm_dev guards when detaching CCS read/write buffers
accel: ethosu: Handle U85 internal chaining buffer
...
Pull ceph fixes from Ilya Dryomov:
"A bunch of assorted fixes with the majority being hardening against
malformed input and invalid data scenarios that don't happen in real
deployments but can be utilized to trigger use-after-free and similar
issues, some error path leak fixups and two patches from Max to avoid
a potential hang in __ceph_get_caps() and unintended nesting of
current->journal_info while handling replies from the MDS.
All marked for stable"
* tag 'ceph-for-7.2-rc5' of https://github.com/ceph/ceph-client:
ceph: avoid fs reclaim while using current->journal_info
ceph: add owner/capability checks for CEPH_IOC_SET_LAYOUT*
ceph: fix hanging __ceph_get_caps() with stale mds_wanted
rbd: Reset positive result codes to zero in object map update path
libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE
libceph: refresh auth->authorizer_buf{,_len} after authorizer update
ceph: fix refcount leak in ceph_readdir()
libceph: guard missing CRUSH type name lookup
libceph: remove debugfs files before client teardown
libceph: bound get_version reply decode to front len
ceph: fix writeback_count leak in write_folio_nounlock()
libceph: fix two unsafe bare decodes in decode_lockers()
ceph: fix pre-auth out-of-bounds read on snaptrace in ceph_handle_caps()
libceph: Reject monmaps advertising zero monitors
libceph: reject zero bucket types in crush_decode
libceph: Fix multiplication overflow in decode_new_up_state_weight()
Pull fscrypt fixes from Eric Biggers:
"A couple fixes for AI-detected bugs"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: Avoid dynamic allocation in fscrypt_get_devices()
fscrypt: Add missing superblock check in find_or_insert_direct_key()
