On SDM845 PCI controller bindings are not compatible with snps,dw-pcie
binding. The platform doesn't provide second (global) IRQ, it requires
additional glue code. To prevent it from probing against the dw-pcie
driver, remove corresponding compatible.
Fixes: 5c538e09cb ("arm64: dts: qcom: sdm845: Add first PCIe controller and PHY")
Fixes: 42ad231338 ("arm64: dts: qcom: sdm845: Add second PCIe PHY and controller")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411115808.1976500-1-dmitry.baryshkov@linaro.org
Dragonboard845c doesn't have board-specific board-id programmed, it uses
generic 0xff. Thus add the property with the 'variant' of the
calibration data.
Note: the driver will check for the calibration data for the following
IDs, so older board-2.bin files that were distributed as a part of
Linaro releases will continue to work.
- 'bus=snoc,qmi-board-id=ff,qmi-chip-id=30214,variant=Thundercomm_DB845C'
- 'bus=snoc,qmi-board-id=ff,qmi-chip-id=30214'
- 'bus=snoc,qmi-board-id=ff'
For the reference, the board is identified by the driver in the
following way:
ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40030001
ath10k_snoc 18800000.wifi: qmi fw_version 0x2009856b fw_build_timestamp 2018-07-19 12:28 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
Fixes: 3f72e2d3e6 ("arm64: dts: qcom: Add Dragonboard 845c")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220403105711.1173161-1-dmitry.baryshkov@linaro.org
The property vddp-ref-clk-max-microamp (for VDDP ref clk supply which is
l25 regulator) is not documented in MSM8996 UFS PHY bindings
(qcom,msm8996-qmp-ufs-phy). It is mentioned in the other UFS PHY
bindings for qcom,msm8996-ufs-phy-qmp-14nm.
The MSM8996-based Xiaomi devices configure l25 regulator in a
conflicting way:
1. with maximum 100 uAmp for VDDP ref clk supply of UFS PHY,
2. with maximum 450 mAmp for VCCQ supply of UFS.
Since the vddp-ref-clk-max-microamp property is basically not
documented for that UFS PHY and has a conflicting values, drop it
entirely as it looks like not tested and not used ever.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220407092725.232463-1-krzysztof.kozlowski@linaro.org
The SAR node, ap_sar_sensor, needs to be enabled in addition to the i2c
bus it resides on. Let's simplify this by leaving the sensor node
enabled by default while leaving the i2c bus disabled by default. On
boards that use the sensor, we already enable the i2c bus so we can
simply remove the extra bit that enables the sar sensor node. This saves
some lines but is otherwise a non-functional change.
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220325211640.54228-1-swboyd@chromium.org
Having these pins with outputs is good on a fresh boot because it puts
the boot and reset pins in a known "good" state. Unfortunately, that
conflicts with the fingerprint firmware flashing code. The firmware
flashing process binds and unbinds the cros-ec and spidev drivers and
that reapplies the pin output values after the flashing code has
overridden the gpio values. This causes a problem because we try to put
the device into bootloader mode, bind the spidev driver and that
inadvertently puts it right back into normal boot mode, breaking the
flashing process.
Fix this by removing the outputs. We'll introduce a binding for
fingerprint cros-ec specifically to set the gpios properly via gpio APIs
during cros-ec driver probe instead.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Alexandru M Stan <amstan@chromium.org>
Fixes: 116f7cc43d ("arm64: dts: qcom: sc7280: Add herobrine-r1")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220317010640.2498502-2-swboyd@chromium.org
While scoping signals, we found that the PCIe signals weren't
compliant at bootup. Specifically, the bootloader was setting up PCIe
and leaving it configured, then jumping to the kernel. The kernel was
turning off the regulator while leaving the PCIe clock running, which
was a violation.
In the regulator bindings (and the Linux kernel driver that uses
them), there's currently no way to specify that a GPIO-controlled
regulator should keep its state at bootup. You've got to pick either
"on" or "off". Let's switch it so that the PCIe regulator defaults to
"on" instead of "off". This should be a much safer way to go and
avoids the timing violation. The regulator will still be turned off
later if there are no users.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220310130429.1.Id41fda1d7f5d9230bc45c1b85b06b0fb0ddd29af@changeid
Pull more tracing updates from Steven Rostedt:
- Rename the staging files to give them some meaning. Just
stage1,stag2,etc, does not show what they are for
- Check for NULL from allocation in bootconfig
- Hold event mutex for dyn_event call in user events
- Mark user events to broken (to work on the API)
- Remove eBPF updates from user events
- Remove user events from uapi header to keep it from being installed.
- Move ftrace_graph_is_dead() into inline as it is called from hot
paths and also convert it into a static branch.
* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Move user_events.h temporarily out of include/uapi
ftrace: Make ftrace_graph_is_dead() a static branch
tracing: Set user_events to BROKEN
tracing/user_events: Remove eBPF interfaces
tracing/user_events: Hold event_mutex during dyn_event_add
proc: bootconfig: Add null pointer check
tracing: Rename the staging files for trace_events
Pull clk fix from Stephen Boyd:
"A single revert to fix a boot regression seen when clk_put() started
dropping rate range requests. It's best to keep various systems
booting so we'll kick this out and try again next time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
Revert "clk: Drop the rate range on clk_put()"
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
Pull RT signal fix from Thomas Gleixner:
"Revert the RT related signal changes. They need to be reworked and
generalized"
* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
Pull more dma-mapping updates from Christoph Hellwig:
- fix a regression in dma remap handling vs AMD memory encryption (me)
- finally kill off the legacy PCI DMA API (Christophe JAILLET)
* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: move pgprot_decrypted out of dma_pgprot
PCI/doc: cleanup references to the legacy PCI DMA API
PCI: Remove the deprecated "pci-dma-compat.h" API
