The switch() logic there misses a break and a default case.
That makes it more prone to problems as the code change.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add basic support for Maxim MAX96712 quad GMSL2 deserializers. The
driver is capable of powering on the device and configuring the MIPI
CSI-2 bus in a DPHY 4-lane configuration as well as operating the
internal VTG (Video Timing Generator) and VPG (Video Pattern Generator).
Using these features the driver is able to act as a 1080p @ 30 fps V4L2
video source. Producing either a checkerboard or gradient pattern on the
CSI-2 bus, selectable thru a V4L2 control.
While the driver is useful as-is and have been used to prove the correct
operation of the MAX96712 itself and "downstream" devices using the
MAX96712 as a video source there are a lot of features missing. Most
notably the ability to operate the GMSL bus.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This is already disabled on some parts of the code, and trying
to use it with current firmware causes an error:
[ 53.799946] atomisp-isp2 0000:00:03.0: can't create streams
[ 53.799962] atomisp-isp2 0000:00:03.0: __get_frame_info 1600x900 (padded to 0) returned -22
So, completely disable reporting it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The atomisp sensors and logic adds an extra pad lines/columns,
called "dvs envelope". It also uses an extra 12 lines/columns
at the sensor for BYT.
As those are not visible to userspace, the V4L2 API should
decrement such values when reporting the current resolution.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The bayer formats aren't currently available for userspace
to select: those are marked as IA_CSS_FRAME_FORMAT_RAW and
trying to get them result on binary firmware load errors:
[74625.258097] atomisp-isp2 0000:00:03.0: Using binary isp_preview_var_isp2 (id 22), type 0, mode 1, continuous true
[74625.258146] atomisp-isp2 0000:00:03.0: Seeking for binary failed at:
[74625.258161] CPU: 3 PID: 2792 Comm: v4l2grab Tainted: G C 5.15.0-rc4+ #77
[74625.258190] Hardware name: ASUSTeK COMPUTER INC. T101HA/T101HA, BIOS T101HA.306 04/23/2019
[74625.258208] Call Trace:
[74625.258231] dump_stack_lvl+0x46/0x5a
[74625.258272] ia_css_binary_find+0xa7d/0xcf0 [atomisp]
[74625.258570] load_preview_binaries+0x323/0x3c0 [atomisp]
...
[74625.265892] atomisp-isp2 0000:00:03.0: can't create streams
[74625.265937] atomisp-isp2 0000:00:03.0: __get_frame_info 1604x1200 (padded to 0) returned -22
[74625.265962] atomisp-isp2 0000:00:03.0: Can't set format on ISP. Error -22
As those formats are ignored by purpose, it doesn't make any sense
to print a message like:
atomisp_enum_fmt_cap(): format for code 3007 not found.
for those.
Yet, some day it would be interesting to also report the bayer
formats, letting userspace to decode them on a different way.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While different sensors could have different colorspaces, the
colorspace V4L2 support didn't exist by the time atomisp driver
was written. So, the sensors won't have any data about that.
So, let's report what Asus T101HA uses (ov2680 sensor).
It may require further changes, if other sensors used on this
driver have different colorspaces.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current logic only initializes pipe->pix after setting up a
pipeline - e. g. after start streaming.
While it makes sense to get the format of the pipeline, when
it is set, this breaks support for generic applications, as they
rely on getting the current sensor format (which is usually the
highest resolution format).
So, implement a call to the sensor's get_fmt, when this is called
before setting up a pipeline.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When atomisp is used by a normal client, it fails to get
frame info. However, the information is confusing and misleading,
as there are several wrappers for such function, and the error
could be on different places.
So, improve the error log in order to allow narrowing down
where the error is actually occuring.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Changeset 374d62e7aa ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument")
added an extra verification for a pads parameter for enum mbus
format code.
Such change broke atomisp, because now the V4L2 core
refuses to enum MBUS formats if the state is empty.
So, add .which field in order to select the active formats,
in order to make it work again.
While here, improve error messages.
Fixes: 374d62e7aa ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Date: Mon, 06 Nov 2017 23:36:36 +0000
This isn't the ideal final solution but it stops the main problem for now
where an open (often from udev) races the device initialization and we try
and load the firmware twice at the same time. This needless to say doesn't
usually end well.
[kitakar: ported to upstream Kernel]
[mchehab: make comments to use our coding style]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch removes the unnamed struct `shading` from
`struct sh_css_sp_pipeline` as well as its usage [1].
[1] added on updating css version to irci_master_20150701_0213
https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch
("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213")
This patch, together with the 4 patches applied before it revert incompatible
changes in the current css version for ISP2401 (irci_ecr-master_20150911_0724)
back to irci_stable_candrpv_0415_20150521_0458.
Some `struct`s are `sizeof()`ed in sh_css_firmware.c file. So, I guess
issues will happen if these sizes are changed. Therefore, keep them the
same as css version irci_stable_candrpv_0415_20150521_0458 to make atomisp
work for firmware made for such css version since we don't have firmware
made for the current css version.
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
## `if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_TPG) {` case
The intel-aero atomisp has `#if defined(IS_ISP_2400_SYSTEM)` [1]. It is
to be defined in the following two places [2]:
- css/hive_isp_css_common/system_global.h
- css/css_2401_csi2p_system/system_global.h
and the former file is to be included on ISP2400 devices, too. So, it
is to be defined for both ISP2400 and ISP2401 devices.
Because the upstreamed atomisp driver now supports only ISP2400 and
ISP2401, just remove the ISP version test again. This matches the other
upstream commits like 3c0538fbad ("media: atomisp: get rid of most
checks for ISP2401 version").
While here, moved the comment for define GP_ISEL_TPG_MODE to the
appropriate place.
[1] a1b673258f/drivers/media/pci/atomisp/css/sh_css.c (L552-L558)
[2] https://github.com/intel-aero/linux-kernel/search?q=IS_ISP_2400_SYSTEM
## `isys_stream_descr->polling_mode` case
This does not exist on the intel-aero atomisp. This is because it is
based on css version irci_stable_candrpv_0415_20150521_0458.
On the other hand, the upstreamed atomisp is based on the following css
version depending on the ISP version using ifdefs:
- ISP2400: irci_stable_candrpv_0415_20150521_0458
- ISP2401: irci_master_20150911_0724
The `isys_stream_descr->polling_mode` usage was added on updating css
version to irci_master_20150701_0213 [3].
So, it is not a ISP version specific thing, but css version specific
thing. Because the upstreamed atomisp driver uses irci_master_20150911_0724
for ISP2401, re-add the ISP version check for now.
I say "for now" because ISP2401 should eventually use the same css
version with ISP2400 (i.e., irci_stable_candrpv_0415_20150521_0458)
[3] https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch
("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213")
Link to Intel's Android kernel patch.
## `coord = &me->config.internal_frame_origin_bqs_on_sctbl;` case
it was added on commit 4f744a573d ("media: atomisp: make
sh_css_sp_init_pipeline() ISP version independent") for ISP2401. Because
the upstreamed atomisp for the ISP2401 part is based on
irci_master_20150911_0724, hence the difference.
Because the upstreamed atomisp driver uses irci_master_20150911_0724
for ISP2401, revert the test back to `if (IS_ISP2401)`.
Fixes: 27333dadef ("media: atomisp: adjust some code at sh_css that could be broken")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some debug messages for error cases (messages contain "error: ") use
IA_CSS_DEBUG_TRACE_PRIVATE debug level. This causes these error messages
not to appear unless users raise debug output level to 7 or higher (using
module parameter, dbg_level=7).
So, use IA_CSS_DEBUG_ERROR debug level (dbg_level=1) instead considering
that these are error messages. There is already a macro IA_CSS_ERROR()
for this use case. Let's use it. It automatically appends "error: " at
the beginning and a newline to a message. Therefore, we can remove them
from these messages.
While here, remove the unnecessary newline from one IA_CSS_ERROR()
occurrence in the same file.
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function ia_css_mipi_is_source_port_valid() returns true if the port
is valid. So, we can't use the existing err variable as is.
To fix this issue while reusing that variable, invert the return value
when assigning it to the variable.
Fixes: 3c0538fbad ("media: atomisp: get rid of most checks for ISP2401 version")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, the `port >= N_CSI_PORTS || err` checks for ISP2400 are always
evaluated as true because the err variable is set to `-EINVAL` on
declaration but the variable is never used until the evaluation.
Looking at the diff of commit 3c0538fbad ("media: atomisp: get rid of
most checks for ISP2401 version"), the `port >= N_CSI_PORTS` check is
for ISP2400 and the err variable check is for ISP2401. Fix this issue
by adding ISP version test there accordingly.
Fixes: 3c0538fbad ("media: atomisp: get rid of most checks for ISP2401 version")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When config.mode is IA_CSS_INPUT_MODE_BUFFERED_SENSOR, it rather needs
buffers. Fix it by inverting the return value.
Fixes: 3c0538fbad ("media: atomisp: get rid of most checks for ISP2401 version")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When comparing with intel-aero atomisp [1], it looks like
punit_ddr_dvfs_enable() should take `false` as an argument on mrfld_power
up case.
Code from the intel-aero kernel [1]:
int atomisp_mrfld_power_down(struct atomisp_device *isp)
{
[...]
/*WA:Enable DVFS*/
if (IS_CHT)
punit_ddr_dvfs_enable(true);
int atomisp_mrfld_power_up(struct atomisp_device *isp)
{
[...]
/*WA for PUNIT, if DVFS enabled, ISP timeout observed*/
if (IS_CHT)
punit_ddr_dvfs_enable(false);
This patch fixes the inverted argument as per the intel-aero code, as
well as its comment. While here, fix space issues for comments in
atomisp_mrfld_power().
Note that it does not seem to be possible to unify the up/down cases for
punit_ddr_dvfs_enable(), i.e., we can't do something like the following:
if (IS_CHT)
punit_ddr_dvfs_enable(!enable);
because according to the intel-aero code [1], the DVFS is disabled
before "writing 0x0 to ISPSSPM0 bit[1:0]" and the DVFS is enabled after
"writing 0x3 to ISPSSPM0 bit[1:0]".
[1] a1b673258f/drivers/media/pci/atomisp/atomisp_driver/atomisp_v4l2.c (L431-L514)
Fixes: 0f441fd70b ("media: atomisp: simplify the power down/up code")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
After the commit 9832e155f1 ("[media] media-device: split media
initialization and registration"), calling media_device_cleanup()
is needed it seems. However, currently it is missing for the module
unload path.
Note that for the probe failure path, it is already added in
atomisp_register_entities().
This patch adds the missing call of media_device_cleanup() in
atomisp_unregister_entities().
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When dw9768 working with ACPI systems, the dw9768 was turned
by i2c-core during probe, driver need activate the PM runtime
and ask runtime PM to turn off the device.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
show() should not use snprintf() when formatting the value to be
returned to user space.
Fix the following coccicheck warning:
drivers/media/i2c/ccs/ccs-core.c:3761: WARNING: use scnprintf or sprintf.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Those cause build to break with -Werror with clang-12:
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/gdc.c:121:24: error: unused function 'gdc_reg_load' [-Werror,-Wunused-function]
drivers/staging/media/atomisp/pci/isp/kernels/raw/raw_1.0/ia_css_raw.host.c:33:1: error: unused function 'sh_css_elems_bytes_from_info' [-Werror,-Wunused-function]
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This V4L2 subdev m2m driver enables Chrom-Art Accelerator unit
of STMicroelectronics STM32 SoC series.
Currently support r2m, m2m, m2m_pfc functions.
- r2m, Filling a part or the whole of a destination image with a specific
color.
- m2m, Copying a part or the whole of a source image into a part or the
whole of a destination.
- m2m_pfc, Copying a part or the whole of a source image into a part or the
whole of a destination image with a pixel format conversion.
[hverkuil: fix typo in commit log]
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add V4L2_COLORFX_SET_RGB color effects control, V4L2_CID_COLORFX_RGB
for RGB color setting.
with two mirror changes:
- change 0xFFFFFF to 0xffffff
- fix comments 2^24 to 2^24 - 1
[hverkuil: dropped spaces around + with V4L2_CID_BASE for consistency]
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since the type of parameter size is unsigned long,
it should printk by %lu, instead of %ld, fix it.
Fixes: 7952be9b6e ("media: drivers/media/common/videobuf2: rename from videobuf")
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For platforms without MMU the m2m provides a helper method
v4l2_m2m_get_unmapped_area(), The mmap() routines will call
this to get a proposed address for the mapping.
More detailed information about get_unmapped_area can be found in
Documentation/nommu-mmap.txt
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Pull xfs cleanups from Darrick Wong:
"The most 'exciting' aspect of this branch is that the xfsprogs
maintainer and I have worked through the last of the code
discrepancies between kernel and userspace libxfs such that there are
no code differences between the two except for #includes.
IOWs, diff suffices to demonstrate that the userspace tools behave the
same as the kernel, and kernel-only bits are clearly marked in the
/kernel/ source code instead of just the userspace source.
Summary:
- Clean up open-coded swap() calls.
- A little bit of #ifdef golf to complete the reunification of the
kernel and userspace libxfs source code"
* tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: sync xfs_btree_split macros with userspace libxfs
xfs: #ifdef out perag code for userspace
xfs: use swap() to make dabtree code cleaner
Pull more parisc fixes from Helge Deller:
"Fix a build error in stracktrace.c, fix resolving of addresses to
function names in backtraces, fix single-stepping in assembly code and
flush userspace pte's when using set_pte_at()"
* tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/entry: fix trace test in syscall exit path
parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
parisc: Fix implicit declaration of function '__kernel_text_address'
parisc: Fix backtrace to always include init funtion names
Pull arch/sh updates from Rich Felker.
* tag 'sh-for-5.16' of git://git.libc.org/linux-sh:
sh: pgtable-3level: Fix cast to pointer from integer of different size
sh: fix READ/WRITE redefinition warnings
sh: define __BIG_ENDIAN for math-emu
sh: math-emu: drop unused functions
sh: fix kconfig unmet dependency warning for FRAME_POINTER
sh: Cleanup about SPARSE_IRQ
sh: kdump: add some attribute to function
maple: fix wrong return value of maple_bus_init().
sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/
sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y
sh: boards: Fix the cacography in irq.c
sh: check return code of request_irq
sh: fix trivial misannotations
Pull ARM fixes from Russell King:
- Fix early_iounmap
- Drop cc-option fallbacks for architecture selection
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9156/1: drop cc-option fallbacks for architecture selection
ARM: 9155/1: fix early early_iounmap()
Pull devicetree fixes from Rob Herring:
- Two fixes due to DT node name changes on Arm, Ltd. boards
- Treewide rename of Ingenic CGU headers
- Update ST email addresses
- Remove Netlogic DT bindings
- Dropping few more cases of redundant 'maxItems' in schemas
- Convert toshiba,tc358767 bridge binding to schema
* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: watchdog: sunxi: fix error in schema
bindings: media: venus: Drop redundant maxItems for power-domain-names
dt-bindings: Remove Netlogic bindings
clk: versatile: clk-icst: Ensure clock names are unique
of: Support using 'mask' in making device bus id
dt-bindings: treewide: Update @st.com email address to @foss.st.com
dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
dt-bindings: media: Update maintainers for st,stm32-cec.yaml
dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
dt-bindings: timer: Update maintainers for st,stm32-timer
dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
Pull timer fix from Thomas Gleixner:
"A single fix for POSIX CPU timers to address a problem where POSIX CPU
timer delivery stops working for a new child task because
copy_process() copies state information which is only valid for the
parent task"
* tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
Pull irq fixes from Thomas Gleixner:
"A set of fixes for the interrupt subsystem
Core code:
- A regression fix for the Open Firmware interrupt mapping code where
a interrupt controller property in a node caused a map property in
the same node to be ignored.
Interrupt chip drivers:
- Workaround a limitation in SiFive PLIC interrupt chip which
silently ignores an EOI when the interrupt line is masked.
- Provide the missing mask/unmask implementation for the CSKY MP
interrupt controller.
PCI/MSI:
- Prevent a use after free when PCI/MSI interrupts are released by
destroying the sysfs entries before freeing the memory which is
accessed in the sysfs show() function.
- Implement a mask quirk for the Nvidia ION AHCI chip which does not
advertise masking capability despite implementing it. Even worse
the chip comes out of reset with all MSI entries masked, which due
to the missing masking capability never get unmasked.
- Move the check which prevents accessing the MSI[X] masking for XEN
back into the low level accessors. The recent consolidation missed
that these accessors can be invoked from places which do not have
that check which broke XEN. Move them back to he original place
instead of sprinkling tons of these checks all over the code"
* tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
of/irq: Don't ignore interrupt-controller when interrupt-map failed
irqchip/sifive-plic: Fixup EOI failed when masked
irqchip/csky-mpintc: Fixup mask/unmask implementation
PCI/MSI: Destroy sysfs before freeing entries
PCI: Add MSI masking quirk for Nvidia ION AHCI
PCI/MSI: Deal with devices lying about their MSI mask capability
PCI/MSI: Move non-mask check back into low level accessors
Pull x86 static call update from Thomas Gleixner:
"A single fix for static calls to make the trampoline patching more
robust by placing explicit signature bytes after the call trampoline
to prevent patching random other jumps like the CFI jump table
entries"
* tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
static_call,x86: Robustify trampoline patching
Pull scheduler fixes from Borislav Petkov:
- Avoid touching ~100 config files in order to be able to select the
preemption model
- clear cluster CPU masks too, on the CPU unplug path
- prevent use-after-free in cfs
- Prevent a race condition when updating CPU cache domains
- Factor out common shared part of smp_prepare_cpus() into a common
helper which can be called by both baremetal and Xen, in order to fix
a booting of Xen PV guests
* tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
preempt: Restore preemption model selection configs
arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology()
sched/fair: Prevent dead task groups from regaining cfs_rq's
sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
x86/smp: Factor out parts of native_smp_prepare_cpus()
Pull perf fixes from Borislav Petkov:
- Prevent unintentional page sharing by checking whether a page
reference to a PMU samples page has been acquired properly before
that
- Make sure the LBR_SELECT MSR is saved/restored too
- Reset the LBR_SELECT MSR when resetting the LBR PMU to clear any
residual data left
* tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Avoid put_page() when GUP fails
perf/x86/vlbr: Add c->flags to vlbr event constraints
perf/x86/lbr: Reset LBR_SELECT during vlbr reset
Pull x86 fixes from Borislav Petkov:
- Add the model number of a new, Raptor Lake CPU, to intel-family.h
- Do not log spurious corrected MCEs on SKL too, due to an erratum
- Clarify the path of paravirt ops patches upstream
- Add an optimization to avoid writing out AMX components to sigframes
when former are in init state
* tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add Raptor Lake to Intel family
x86/mce: Add errata workaround for Skylake SKX37
MAINTAINERS: Add some information to PARAVIRT_OPS entry
x86/fpu: Optimize out sigframe xfeatures when in init state
