Current test-component.c is using for_each_endpoint_of_node()
for parsing "port", because there was no "port" base loop before.
It has been assuming 1 port has 1 endpoint here.
But now we can use "port" base loop (= for_each_of_graph_port()).
Let's replace for_each function from "endpoint" base to "port" base.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/87h692b5sw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
We already have of_graph_get_next_endpoint(), but it is not
intuitive to use in some case.
(X) node {
(Y) ports {
(P0) port@0 { endpoint { remote-endpoint = ...; };};
(P10) port@1 { endpoint { remote-endpoint = ...; };
(P11) endpoint { remote-endpoint = ...; };};
(P2) port@2 { endpoint { remote-endpoint = ...; };};
};
};
For example, if I want to handle port@1's 2 endpoints (= P10, P11),
I want to use like below
P10 = of_graph_get_next_endpoint(port1, NULL);
P11 = of_graph_get_next_endpoint(port1, P10);
But 1st one will be error, because of_graph_get_next_endpoint()
requested 1st parameter is "node" (X) or "ports" (Y), not but "port".
Below works well, but it will get P0
P0 = of_graph_get_next_endpoint(node, NULL);
P0 = of_graph_get_next_endpoint(ports, NULL);
In other words, we can't handle P10/P11 directly via
of_graph_get_next_endpoint().
There is another non intuitive behavior on of_graph_get_next_endpoint().
In case of if I could get P10 pointer for some way, and if I want to
handle port@1 things by loop, I would like use it like below
/*
* "ep" is now P10, and handle port1 things here,
* but we don't know how many endpoints port1 have.
*
* Because "ep" is non NULL now, we can use port1
* as of_graph_get_next_endpoint(port1, xxx)
*/
do {
/* do something for port1 specific things here */
} while (ep = of_graph_get_next_endpoint(port1, ep))
But it also not worked as I expected.
I expect it will be P10 -> P11 -> NULL,
but it will be P10 -> P11 -> P2, because
of_graph_get_next_endpoint() will fetch "endpoint" beyond the "port".
It is not useful for generic driver.
To handle endpoint more intuitive, create of_graph_get_next_port_endpoint()
of_graph_get_next_port_endpoint(port1, NULL); // P10
of_graph_get_next_port_endpoint(port1, P10); // P11
of_graph_get_next_port_endpoint(port1, P11); // NULL
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87jzdyb5t5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
We have endpoint base functions
- of_graph_get_next_endpoint()
- of_graph_get_endpoint_count()
- for_each_endpoint_of_node()
Here, for_each_endpoint_of_node() loop finds each endpoints
ports {
port@0 {
(1) endpoint {...};
};
port@1 {
(2) endpoint {...};
};
...
};
In above case, it finds endpoint as (1) -> (2) -> ...
Basically, user/driver knows which port is used for what, but not in
all cases. For example on flexible/generic driver case, how many ports
are used is not fixed.
For example Sound Generic Card driver which is very flexible/generic and
used from many venders can't know how many ports are used, and used for
what, because it depends on each vender SoC and/or its used board.
And more, the port can have multi endpoints. For example Generic Sound
Card case, it supports many type of connection between CPU / Codec, and
some of them uses multi endpoint in one port. see below.
ports {
(A) port@0 {
(1) endpoint@0 {...};
(2) endpoint@1 {...};
};
(B) port@1 {
(3) endpoint {...};
};
...
};
Generic Sound Card want to handle each connection via "port" base instead
of "endpoint" base. But, it is very difficult to handle each "port" via
existing for_each_endpoint_of_node(). Because getting each "port" via
of_get_parent() from each "endpoint" doesn't work. For example in above
case, both (1) (2) endpoint has same "port" (= A).
Add "port" base functions.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ldyeb5t9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
In of_modalias(), there's no dire need to call strlen() (and then add 1
to its result to account for the 'C' char preceding the compat string).
Replace that strlen() with snprintf() (currently below it) -- this way,
we always try to print the compat string but then only advance the str
and len parameters iff the compat string fit into the remaining buffer
space...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/471418be-5d2f-4d14-bd9e-9e8f0526241f@omp.ru
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The reserved_mem array is statically allocated with a size of
MAX_RESERVED_REGIONS(64). Therefore, if the number of reserved_mem
regions exceeds this size, there will not be enough space to store
all the data.
Hence, extend the use of the static array by introducing a
dynamically allocated array based on the number of reserved memory
regions specified in the DT.
On architectures such as arm64, memblock allocated memory is not
writable until after the page tables have been setup. Hence, the
dynamic allocation of the reserved_mem array will need to be done only
after the page tables have been setup.
As a result, a temporary static array is still needed in the initial
stages to store the information of the dynamically-placed reserved
memory regions because the start address is selected only at run-time
and is not stored anywhere else.
It is not possible to wait until the reserved_mem array is allocated
because this is done after the page tables are setup and the reserved
memory regions need to be initialized before then.
After the reserved_mem array is allocated, all entries from the static
array is copied over to the new array, and the rest of the information
for the statically-placed reserved memory regions are read in from the
DT and stored in the new array as well.
Once the init process is completed, the temporary static array is
released back to the system because it is no longer needed. This is
achieved by marking it as __initdata.
Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Link: https://lore.kernel.org/r/20241008220624.551309-3-quic_obabatun@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reserved memory regions defined in the devicetree can be broken up into
two groups:
i) Statically-placed reserved memory regions
i.e. regions defined with a static start address and size using the
"reg" property.
ii) Dynamically-placed reserved memory regions.
i.e. regions defined by specifying an address range where they can be
placed in memory using the "alloc_ranges" and "size" properties.
These regions are processed and set aside at boot time.
This is done in two stages as seen below:
Stage 1:
At this stage, fdt_scan_reserved_mem() scans through the child nodes of
the reserved_memory node using the flattened devicetree and does the
following:
1) If the node represents a statically-placed reserved memory region,
i.e. if it is defined using the "reg" property:
- Call memblock_reserve() or memblock_mark_nomap() as needed.
- Add the information for that region into the reserved_mem array
using fdt_reserved_mem_save_node().
i.e. fdt_reserved_mem_save_node(node, name, base, size).
2) If the node represents a dynamically-placed reserved memory region,
i.e. if it is defined using "alloc-ranges" and "size" properties:
- Add the information for that region to the reserved_mem array with
the starting address and size set to 0.
i.e. fdt_reserved_mem_save_node(node, name, 0, 0).
Note: This region is saved to the array with a starting address of 0
because a starting address is not yet allocated for it.
Stage 2:
After iterating through all the reserved memory nodes and storing their
relevant information in the reserved_mem array,fdt_init_reserved_mem() is
called and does the following:
1) For statically-placed reserved memory regions:
- Call the region specific init function using
__reserved_mem_init_node().
2) For dynamically-placed reserved memory regions:
- Call __reserved_mem_alloc_size() which is used to allocate memory
for each of these regions, and mark them as nomap if they have the
nomap property specified in the DT.
- Call the region specific init function.
The current size of the resvered_mem array is 64 as is defined by
MAX_RESERVED_REGIONS. This means that there is a limitation of 64 for
how many reserved memory regions can be specified on a system.
As systems continue to grow more and more complex, the number of
reserved memory regions needed are also growing and are starting to hit
this 64 count limit, hence the need to make the reserved_mem array
dynamically sized (i.e. dynamically allocating memory for the
reserved_mem array using membock_alloc_*).
On architectures such as arm64, memory allocated using memblock is
writable only after the page tables have been setup. This means that if
the reserved_mem array is going to be dynamically allocated, it needs to
happen after the page tables have been setup, not before.
Since the reserved memory regions are currently being processed and
added to the array before the page tables are setup, there is a need to
change the order in which some of the processing is done to allow for
the reserved_mem array to be dynamically sized.
It is possible to process the statically-placed reserved memory regions
without needing to store them in the reserved_mem array until after the
page tables have been setup because all the information stored in the
array is readily available in the devicetree and can be referenced at
any time.
Dynamically-placed reserved memory regions on the other hand get
assigned a start address only at runtime, and hence need a place to be
stored once they are allocated since there is no other referrence to the
start address for these regions.
Hence this patch changes the processing order of the reserved memory
regions in the following ways:
Step 1:
fdt_scan_reserved_mem() scans through the child nodes of
the reserved_memory node using the flattened devicetree and does the
following:
1) If the node represents a statically-placed reserved memory region,
i.e. if it is defined using the "reg" property:
- Call memblock_reserve() or memblock_mark_nomap() as needed.
2) If the node represents a dynamically-placed reserved memory region,
i.e. if it is defined using "alloc-ranges" and "size" properties:
- Call __reserved_mem_alloc_size() which will:
i) Allocate memory for the reserved region and call
memblock_mark_nomap() as needed.
ii) Call the region specific initialization function using
fdt_init_reserved_mem_node().
iii) Save the region information in the reserved_mem array using
fdt_reserved_mem_save_node().
Step 2:
1) This stage of the reserved memory processing is now only used to add
the statically-placed reserved memory regions into the reserved_mem
array using fdt_scan_reserved_mem_reg_nodes(), as well as call their
region specific initialization functions.
2) This step has also been moved to be after the page tables are
setup. Moving this will allow us to replace the reserved_mem
array with a dynamically sized array before storing the rest of
these regions.
Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Link: https://lore.kernel.org/r/20241008220624.551309-2-quic_obabatun@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The YAML format has a couple of different forms for multi-line text
blocks which control allowed characters and handling of line-breaks.
Getting this wrong is a common review issue. Either a literal block is
used when there's no formatting needed or a folded/literal block is
not used when there is formatting to maintain.
Add some descriptions of the different forms to point folks to in
reviews.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240918195130.2024205-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Schemas for array properties should only have 1 level of array
constraints (e.g. items, maxItems, minItems). Sometimes the old
encoding of all properties into a matrix leaked into the schema, and
didn't matter for validation. Now the inner constraints are just
silently ignored as json-schema array keywords are ignored on scalar
values.
Generally, keep the inner constraints and drop the outer "items". With
gicv3 "mbi-alias" property, it is more appropriately a uint32 or uint64
as it is an address and size depends on "#address-cells".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240925232409.2208515-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The adt7462 supports monitoring and controlling up to
four PWM Fan drive outputs and eight TACH inputs measures.
The adt7462 supports reading a single on chip temperature
sensor and three remote temperature sensors. There are up
to 13 voltage monitoring inputs.
Add device tree bindings for the adt7462 device.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20240923093800.892949-1-chanh@os.amperecomputing.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
Pull dma-mapping fix from Christoph Hellwig:
- handle chained SGLs in the new tracing code (Christoph Hellwig)
* tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix DMA API tracing for chained scatterlists
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
Pull more bcachefs updates from Kent Overstreet:
"Assorted minor syzbot fixes, and for bigger stuff:
Fix two disk accounting rewrite bugs:
- Disk accounting keys use the version field of bkey so that journal
replay can tell which updates have been applied to the btree.
This is set in the transaction commit path, after we've gotten our
journal reservation (and our time ordering), but the
BCH_TRANS_COMMIT_skip_accounting_apply flag that journal replay
uses was incorrectly skipping this for new updates generated prior
to journal replay.
This fixes the underlying cause of an assertion pop in
disk_accounting_read.
- A couple of fixes for disk accounting + device removal.
Checking if acocunting replicas entries were marked in the
superblock was being done at the wrong point, when deltas in the
journal could still zero them out, and then additionally we'd try
to add a missing replicas entry to the superblock without checking
if it referred to an invalid (removed) device.
A whole slew of repair fixes:
- fix infinite loop in propagate_key_to_snapshot_leaves(), this fixes
an infinite loop when repairing a filesystem with many snapshots
- fix incorrect transaction restart handling leading to occasional
"fsck counted ..." warnings
- fix warning in __bch2_fsck_err() for bkey fsck errors
- check_inode() in fsck now correctly checks if the filesystem was
clean
- there shouldn't be pending logged ops if the fs was clean, we now
check for this
- remove_backpointer() doesn't remove a dirent that doesn't actually
point to the inode
- many more fsck errors are AUTOFIX"
* tag 'bcachefs-2024-09-28' of git://evilpiepirate.org/bcachefs: (35 commits)
bcachefs: check_subvol_path() now prints subvol root inode
bcachefs: remove_backpointer() now checks if dirent points to inode
bcachefs: dirent_points_to_inode() now warns on mismatch
bcachefs: Fix lost wake up
bcachefs: Check for logged ops when clean
bcachefs: BCH_FS_clean_recovery
bcachefs: Convert disk accounting BUG_ON() to WARN_ON()
bcachefs: Fix BCH_TRANS_COMMIT_skip_accounting_apply
bcachefs: Check for accounting keys with bversion=0
bcachefs: rename version -> bversion
bcachefs: Don't delete unlinked inodes before logged op resume
bcachefs: Fix BCH_SB_ERRS() so we can reorder
bcachefs: Fix fsck warnings from bkey validation
bcachefs: Move transaction commit path validation to as late as possible
bcachefs: Fix disk accounting attempting to mark invalid replicas entry
bcachefs: Fix unlocked access to c->disk_sb.sb in bch2_replicas_entry_validate()
bcachefs: Fix accounting read + device removal
bcachefs: bch_accounting_mode
bcachefs: fix transaction restart handling in check_extents(), check_dirents()
bcachefs: kill inode_walker_entry.seen_this_pos
...
Pull x86 fixes from Ingo Molnar:
"Fix TDX MMIO #VE fault handling, and add two new Intel model numbers
for 'Pantherlake' and 'Diamond Rapids'"
* tag 'x86-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add two Intel CPU model numbers
x86/tdx: Fix "in-kernel MMIO" check
Pull coccinelle updates from Julia Lawall:
"Extend string_choices.cocci to use more available helpers
Ten patches from Hongbo Li extending string_choices.cocci with the
complete set of functions offered by include/linux/string_choices.h.
One patch from myself reducing the number of redundant cases that are
checked by Coccinelle, giving a small performance improvement"
* tag 'cocci-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
Reduce Coccinelle choices in string_choices.cocci
coccinelle: Remove unnecessary parentheses for only one possible change.
coccinelle: Add rules to find str_yes_no() replacements
coccinelle: Add rules to find str_on_off() replacements
coccinelle: Add rules to find str_write_read() replacements
coccinelle: Add rules to find str_read_write() replacements
coccinelle: Add rules to find str_enable{d}_disable{d}() replacements
coccinelle: Add rules to find str_lo{w}_hi{gh}() replacements
coccinelle: Add rules to find str_hi{gh}_lo{w}() replacements
coccinelle: Add rules to find str_false_true() replacements
coccinelle: Add rules to find str_true_false() replacements
Pull kselftest fix from Shuah Khan:
"One urgent fix to vDSO as automated testing is failing due to this
bug"
* tag 'linux_kselftest-next-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vDSO: align stack for O2-optimized memcpy
The isomorphism neg_if_exp negates the test of a ?: conditional,
making it unnecessary to have an explicit case for a negated test
with the branches inverted.
At the same time, we can disable neg_if_exp in cases where a
different API function may be more suitable for a negated test.
Finally, in the non-patch cases, E matches an expression with
parentheses around it, so there is no need to mention ()
explicitly in the pattern. The () are still needed in the patch
cases, because we want to drop them, if they are present.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
The parentheses are only needed if there is a disjunction, ie a
set of possible changes. If there is only one pattern, we can
remove these parentheses. Just like the format:
- x
+ y
not:
(
- x
+ y
)
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
As other rules done, we add rules for str_yes_no()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
As other rules done, we add rules for str_on_off()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
As other rules done, we add rules for str_write_read()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
As other rules done, we add rules for str_read_write()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
As other rules done, we add rules for str_enable{d}_
disable{d}() to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
As other rules done, we add rules for str_lo{w}_hi{gh}()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
As other rules done, we add rules for str_hi{gh}_lo{w}()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
As done with str_true_false(), add checks for str_false_true()
opportunities. A simple test can find over 9 cases currently
exist in the tree.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
