Commit Graph

1309948 Commits

Author SHA1 Message Date
Imre Deak
b1d43e6fb3 drm/i915/dp: Flush modeset commits during connector detection
Make sure that a DP connector detection doesn't happen in parallel
with an ongoing modeset on the connector. The reasons for this are:

- Besides reading the capabilities, EDID etc. the detection may change
  the state of the sink (via the AUX bus), for instance by setting the
  LTTPR mode or the source OUI (the latter introduced by an upcoming
  patch). It's better to avoid such changes affecting an onging modeset
  in any way.

- During a modeset's link training any access to DPCD registers, besides
  the registers used for link training should be avoided, at least in
  the LTTPR non-transparent and transparent link training modes.

  Such asynchronous accesses - besides connector detection - can also
  happen via the AUX device node for instance, for those a parallel
  modeset will have to be avoided in a similar way to the change in this
  patch. (A topic for a follow-up change.)

- The source OUI written to an eDP sink is valid only while the panel
  power is enabled. A modeset on eDP will enable/disable the panel power
  synchronously; this should be prevented in the middle of the connector
  detection, to ensure a consistent sink state (which depends on the
  source OUI) for the whole duration of detection. The panel power could
  still get disabled during detection after an idle period (1 sec), this
  will be prevented by the next patch.

v2: (Ville)
- s/wait_for_crtc_hw_done/wait_for_connector_hw_done
- Get drm_device using an intel_display instead of drm_i915_private ptr.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-2-imre.deak@intel.com
2024-10-31 17:47:24 +02:00
Jani Nikula
5eb2e78559 drm/i915/display: use x100 version for full version and release
Use x100, or ver * 100 + rel, versions for full IP version checks,
similar to what xe driver does:

- Replace IP_VER(14, 1) inline with 1401, etc.

- Convert DISPLAY_VER_FULL() to DISPLAY_VERx100()

- Convert IS_DISPLAY_VER_FULL() to IS_DISPLAY_VERx100()

- Convert IS_DISPLAY_VER_STEP() to IS_DISPLAY_VERx100_STEP()

This makes ver.rel versions easier to use, follows the xe driver
pattern, and drops the dependency on the IP_VER() macro.

v2: Rebase, drop IP_VER() from xe compat headers

v3: Rebase

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029155536.753413-1-jani.nikula@intel.com
2024-10-30 14:19:07 +02:00
Jani Nikula
3291b7418a drm/i915/de: remove unnecessary generic wrappers
With many of the intel_de_* callers switched over to struct
intel_display, we can remove some of the unnecessary generic wrappers.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/82da66027a122b336278daa2c9a9eb39843082ba.1730146000.git.jani.nikula@intel.com
2024-10-30 13:52:25 +02:00
Jani Nikula
7c05c58c15 drm/i915/dsi: convert to struct intel_display
struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch ICL DSI code over to it.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f62a3616ef15e02cf19c5d041656fc6e09b37f6a.1730146000.git.jani.nikula@intel.com
2024-10-30 13:52:20 +02:00
Jani Nikula
60acb54f05 drm/i915/ips: convert to struct intel_display
struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch HSW IPS code over to it.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/66060d0c3fbb20e5d2c98a92133f091de6b25230.1730146000.git.jani.nikula@intel.com
2024-10-30 13:52:16 +02:00
Jani Nikula
a00d086bca drm/i915/power: convert assert_chv_phy_status() to struct intel_display
struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch assert_chv_phy_status() and its
callers to it. Main motivation to do just one function is to stop
passing i915 to intel_de_wait(), so its generic wrapper can be removed.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/de6b01e1f21934ff520aa3b49ab5f97cbbf028f2.1730146000.git.jani.nikula@intel.com
2024-10-30 13:52:12 +02:00
Jani Nikula
6400c0b979 drm/i915/display: convert vlv_wait_port_ready() to struct intel_display
struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch vlv_wait_port_ready() over to
it. The main motivation to do just one function is to stop passing i915
to intel_de_wait(), so its generic wrapper can be removed.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9505ea49dfc8c7a52cacd2749875a680b01e5bbd.1730146000.git.jani.nikula@intel.com
2024-10-30 13:52:09 +02:00
Jani Nikula
40eb34c3f4 drm/i915/crt: convert to struct intel_display
struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch CRT code over to it.

v2: Rebase

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029105257.391572-1-jani.nikula@intel.com
2024-10-30 13:52:03 +02:00
Jani Nikula
1fb26d0260 drm/i915/dp/hdcp: convert to struct intel_display
struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch DP HDCP code over to it.

v2: Rebase

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029090422.198749-1-jani.nikula@intel.com
2024-10-30 13:51:57 +02:00
Jani Nikula
c214fc98cf drm/i915/hdcp: further conversion to struct intel_display
There are some unconverted stragglers left in the HDCP API still using
struct drm_i915_private. Convert to struct intel_display.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9680cc9e5ed7798a736fa73ad9ea0eb9c88e64bb.1730146000.git.jani.nikula@intel.com
2024-10-30 13:51:51 +02:00
Jani Nikula
86e89eca10 drm/i915/dpio: convert to struct intel_display
struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch DPIO PHY code over to it.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1138083101f3c9058284592009b25f41065fbe30.1730146000.git.jani.nikula@intel.com
2024-10-30 13:51:44 +02:00
Jani Nikula
5a12173d48 drm/i915/cx0: convert to struct intel_display
struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch Cx0 PHY code over to it.

v2: Rebase, split out the include cleanups (Rodrigo)

v3: Rebase

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029160822.800097-1-jani.nikula@intel.com
2024-10-30 13:51:35 +02:00
Jani Nikula
685333aabf drm/i915/cx0: remove unnecessary includes
There's nothing in the header that requires the bit or bitfield
headers. Remove.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3e12f1d5ab17e501e4700044072fbb6dd9b2f459.1730146000.git.jani.nikula@intel.com
2024-10-30 13:51:32 +02:00
Jani Nikula
fdc387383e drm/i915/gmbus: convert to struct intel_display
struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch gmbus code over to it.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d784e4799ab5095baa5c8fd840920066878c6273.1730146000.git.jani.nikula@intel.com
2024-10-30 13:51:26 +02:00
Jani Nikula
331313aa50 drm/i915/vblank: use display->platform.<platform> instead of IS_<PLATFORM>()
Switch to using the new display->platform.<platform> members for
platform identification in display code.

v2: Split out an unrelated hunk to a separate patch (Rodrigo)

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ed7295a7246bf00d8ae39f78c78dcc842c6939d9.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:52 +02:00
Jani Nikula
b95d975ca3 drm/i915/vblank: drop unnecessary i915 local variable
Use struct intel_display where possible.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c925fd0a56ba0a9183b62b7cc0ead0e37264f024.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:52 +02:00
Jani Nikula
ac87b7a5a0 drm/i915/vga: use display->platform.<platform> instead of IS_<PLATFORM>()
Switch to using the new display->platform.<platform> members for
platform identification in display code.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee09546f217723a5f869749562eea7d6e97472f7.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:51 +02:00
Jani Nikula
d9f5160bca drm/i915/tv: use display->platform.<platform> instead of IS_<PLATFORM>()
Switch to using the new display->platform.<platform> members for
platform identification in display code.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/24306709d58bff03c819f44dfada95c1c998ad11.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:51 +02:00
Jani Nikula
471c51e625 drm/i915/pps: use display->platform.<platform> instead of IS_<PLATFORM>()
Switch to using the new display->platform.<platform> members for
platform identification in display code.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/05de39ea5ef3898c115cc4f3725f58116d285339.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:51 +02:00
Jani Nikula
eb164298f7 drm/i915/bios: use display->platform.<platform> instead of IS_<PLATFORM>()
Switch to using the new display->platform.<platform> members for
platform identification in display code.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20dd28a25fbeedb36c576dfbbd11ec97376b903d.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:51 +02:00
Jani Nikula
96670b2b0f drm/i915/display: add subplatform group for HSW/BDW ULT
Add support for defining aliases for subplatform groups, such as HSW/BDW
ULT that covers both ULT and ULX.

ULT is a special case, because we slightly abuse the ULT subplatform
both as a subplatform and group, but with the way this is defined, it
should be fairly clear.

This follows i915 core and IS_HASWELL_ULT()/IS_BROADWELL_ULT()
conventions, i.e. "is ULT" also matches ULX platforms.

Note: Pedantically, this should have been done earlier, but it's only
feasible now that we no longer have a subplatform enum and can actually
initialize multiple subplatforms.

v2: Use the subplatform group idea

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d148b6210a561b874642ae3e0ad10073d0615de7.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:51 +02:00
Jani Nikula
97b4a61ca3 drm/i915/display: add platform group for g4x
Add support for defining aliases for platform groups, such as g4x that
covers both g45 and gm45.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/947bdbc03913838383d75b3e07cf340100cbb5bb.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:51 +02:00
Jani Nikula
e994c6f0b8 drm/i915/display: remove the display platform enum as unnecessary
The display platform enums are not really needed for anything. Remove.

Without the enum, PLATFORM_UNINITIALIZED is also no longer needed for
keeping the first enum 0. Also need to switch from sp->subplatform to
sp->pciidlist as the check for array end.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d20966f1d7a69a1e66768110b427be2fc611bcd2.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:51 +02:00
Jani Nikula
3705e3f48e drm/i915/display: add platform member to struct intel_display
Facilitate using display->platform.haswell and
display->platform.haswell_ult etc. for identifying platforms and
subplatforms.

Merge the platform and subplatform bitmaps together, and check that
there's no overlap.

v4:
- Lower case, s/is/platform/

v3:
- Fix sanity check on display->is after merging subplatform members

v2:
- Use bitmap ops
- Add some sanity checks with warnings

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2ae79637390372903a9808b5adc4d2dcf2c5959b.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:51 +02:00
Jani Nikula
c27cce227e drm/i915/display: add display platforms structure with platform members
Add a structure with a bitfield member for each platform and
subplatform, and initialize them in platform and subplatform descs.

The structure also contains a bitmap in a union for easier manipulation
of the bits. This, in turn, requires a bit of trickery with
INTEL_DISPLAY_PLATFORMS() to count the number of bits required for
DECLARE_BITMAP().

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bf1d828cd333d34862ad3198e282c9d294c6e1ad.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:51 +02:00
Jani Nikula
8cbbc37de4 drm/i915/display: convert display platforms to lower case
This will be helpful for follow-up, where the names here become struct
member names.

This does impact debug logs as well, making everything lower case.

v2: Rebase to adapt to PTL

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8eab1be56093f33a7573e3caa78a4933bbf1ee76.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:51 +02:00
Jani Nikula
2ef1f7abb7 drm/i915/display: join the platform and subplatform enums
We'll want to use the subplatforms similar to platforms. Join the
subplatforms next to their corresponding platforms. Update the comment
while at it.

v2: Put the subplatforms next to the platforms

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/de274ffcd06a249a3983905b285c05d1c89953a8.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:51 +02:00
Jani Nikula
efdc22e910 drm/i915/display: use a macro to define platform enumerations
We'll be needing a macro based list of platforms for more things in the
future. Start by defining the platform enumerations with it.

v3: Rebase for PTL

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fca14c018c54ef4099012d2a764257d651d672d9.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:51 +02:00
Jani Nikula
ee51ffd268 drm/i915/display: use a macro to initialize subplatforms
Make it easier to change the underlying structures by using a macro
similar to PLATFORM() for initialization.

The subplatform names in debug logs change slightly as they now reflect
the enum rather than manually entered names. For example, RAPTORLAKE_S
rather than RPL-S.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c4c9d7ea779475513db68e843c970a4dd8f8ac2c.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:51 +02:00
Jani Nikula
1ca4dc47cc drm/i915/display: reindent subplatform initialization
Make the subplatform initialization less cramped, and follow the coding
style more closely. Initialize .pciidlist using designated initializers.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0b7c3c44e4111c07e38a4bc842bbbced6f97c827.1730144869.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30 11:15:51 +02:00
Clint Taylor
3fb0501f0c drm/i915/display/dp: Reduce log level for SOURCE OUI write failures
Some devices NAK DPCD writes to the SOURCE OUI (0x300) DPCD registers.
Reduce the log level priority to prevent dmesg noise for these devices.

Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241004210816.3976058-1-clinton.a.taylor@intel.com
2024-10-29 17:25:14 -07:00
Ville Syrjälä
654c4ad1a3 drm/i915/color: Make color .get_config() mandatory
Every platforms implements the color .get_config() hook. Just
make it mandatory.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241024165356.17756-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-10-29 20:54:24 +02:00
Ville Syrjälä
9d476ce24f drm/i915/color: Convert color management code to intel_display
struct intel_display will replace struct drm_i915_private as
the main thing for display code. Convert the color management
code to use it (as much as possible at this stage).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241024165356.17756-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-10-29 20:54:12 +02:00
Ville Syrjälä
a0442e8d66 drm/i915: Handle intel_plane and intel_plane_state in to_intel_display()
Allow one to pass intel_plane/intel_plane_state to
to_intel_display(). Works exactly like their crtc
counterparts.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241024165356.17756-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-10-29 20:53:52 +02:00
Ville Syrjälä
dd3721a76f drm/i915/color: Pimp debugs
Include the CRTC id+name information in the color management
debug prints to help identify who is at fault. And also specify
which LUT check_lut_size() is unhappy about.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241024165356.17756-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-10-29 20:53:42 +02:00
Haridhar Kalvala
b7207bdf01 drm/xe/ptl: Enable PTL display
At this point we should have enough support landed to turn on and start
basic testing of display functionality.

Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Signed-off-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Acked-by: Jani Saarinen <jani.saarinen@intel.com>
Tested-by: Jani Saarinen<jani.saarinen@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-10-clinton.a.taylor@intel.com
2024-10-29 07:36:34 -07:00
Heikkila, Juha-pekka
f3759374ad drm/i915/display/xe3: disable x-tiled framebuffers
Xe3 has no more support for x-tile on display.

v2: Include up to display 29 for X-tiled support. (Gustavo)

Signed-off-by: Heikkila, Juha-pekka <juha-pekka.heikkila@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-9-clinton.a.taylor@intel.com
2024-10-29 07:36:34 -07:00
Ravi Kumar Vodapalli
0d94f52cec drm/i915/xe3: Underrun recovery does not exist post Xe2
From platforms xe3 Underrun recovery does not exist

v2: improve DISPLAY_VER checking

BSpec: 68849
Signed-off-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-8-clinton.a.taylor@intel.com
2024-10-29 07:36:34 -07:00
Dnyaneshwar Bhadane
2cffe8b310 drm/i915/xe3lpd: Move async flip bit to PLANE_SURF register
The async flip moved from PLANE_CTL to PLANE_SURF for Xe3_LPD.

Bspec: 69853,69878
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-7-clinton.a.taylor@intel.com
2024-10-29 07:36:34 -07:00
Clint Taylor
b66a028a82 drm/i915/cx0: Remove bus reset after every c10 transaction
C10 phy timeouts occur on xe3lpd if the c10 bus is reset every
transaction. Although not required by BSPEC bus resets were added for
prior platforms as a workaround. Starting with xe3_lpd this bus reset is
not necessary.

Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-6-clinton.a.taylor@intel.com
2024-10-29 07:36:34 -07:00
Dnyaneshwar Bhadane
55371ac670 drm/i915/cx0: Extend C10 check to PTL
When deciding the type of the phy, add PTL support to make
sure the correct path is taken for selection of C10 PHY.
Only port A is connected C10 PHY for Pantherlake.

Bspec:  72571
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-5-clinton.a.taylor@intel.com
2024-10-29 07:36:34 -07:00
Dnyaneshwar Bhadane
f3c5df8118 drm/i915/ptl: Define IS_PANTHERLAKE macro
Common display code requires IS_PANTHERLAKE macro.
Define the macro and set 0 as PTL is no longer support for i915.

Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-4-clinton.a.taylor@intel.com
2024-10-29 07:36:34 -07:00
Suraj Kandpal
75a988f2ce drm/i915/xe3lpd: Add check to see if edp over type c is allowed
Read PICA register to see if edp over type C is possible and then
add the appropriate tables for it.

--v2
-remove bool from intel_encoder have it in runtime_info [Jani]
-initialize the bool in runtime_info init [Jani]
-dont abbreviate the bool [Jani]

--v3
-Remove useless display version check [Jani]
-change the warn on condition [Jani]
-no need for a different function for edp type c check [Jani]
-dont add register in i915_reg [Jani]

Bspec: 68846
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-3-clinton.a.taylor@intel.com
2024-10-29 07:36:34 -07:00
Matt Roper
ae03d70748 drm/i915/xe3lpd: Update pmdemand programming
There are some minor changes to pmdemand handling on Xe3:
 - Active scalers are no longer tracked.  We can simply skip the readout
   and programming of this field.
 - Active dbuf slices are no longer tracked.  We should skip the readout
   and programming of this field and also make sure that it stays 0 in
   our software bookkeeping so that we won't erroneously return true
   from intel_pmdemand_needs_update() due to mismatches.
 - Even though there aren't enough pipes to utilize them, the size of
   the 'active pipes' field has expanded to four bits, taking over the
   register bits previously used for dbuf slices.  Since the lower bits
   of the mask have moved, we need to update our reads/writes to handle
   this properly.

v2: active pipes is no longer always max 3, add in the ability to go to
4 for PTL.
v3: use intel_display for display_ver check, use INTEL_NUM_PIPES
v4: add a conditional for number of pipes macro vs using 3.
v5: reverse conditional order of v4.
v6: undo v5 and fix num_pipes assignment
v7: pass display struct instead of i915, checkpatch fix
v8: Alignment issue

Bspec: 68883, 69125
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-2-clinton.a.taylor@intel.com
2024-10-29 07:36:34 -07:00
Jani Nikula
493454445c drm/xe: switch to common PCI ID macros
Switch to the shared PCI ID macros in drm/intel/pciids.h. Remove
xe_pciids.h.

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84e08172184bdc6409cf6dd13f6c52971c647dbb.1729590029.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-29 16:29:58 +02:00
Jani Nikula
f719c2a2d1 drm/intel/pciids: rename i915_pciids.h to just pciids.h
In preparation of sharing the PCI ID macros between i915 and xe, rename
i915_pciids.h to pciids.h.

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/835143845faa5310e4bb58405a8a0848392bbf06.1729590029.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-29 16:14:04 +02:00
Jani Nikula
1db363f697 drm/i915/pciids: add PVC PCI ID macros
The xe PCI ID macros are a subset of the i915 PCI IDs macros, apart from
the PVC PCI IDs (naturally, because i915 does not and will not support
PVC). In preparation of using a shared file, add PVC PCI IDs to
i915_pciids.h.

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bc62e37cbfa3ed4dbfc75a7ca69b87afae6a727b.1729590029.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-29 16:13:16 +02:00
Jani Nikula
0f4869b163 drm/i915/display: convert I915_STATE_WARN() to struct intel_display
Convert I915_STATE_WARN() to struct intel_display *, and rename to
INTEL_DISPLAY_STATE_WARN(). Do some minor opportunistic struct
drm_i915_private to struct intel_display conversions while at it.

v2: crtc_state may be NULL in intel_connector_verify_state()

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241024162510.2410128-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-29 12:31:28 +02:00
Suraj Kandpal
8c2659dea8 drm/i914/xe3lpd: Increase bigjoiner limitations
With 6k resolution support for a single crtc being added
bigjoiner will only come into picture when hdisplay > 6144

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028074333.182041-4-suraj.kandpal@intel.com
2024-10-29 10:46:45 +05:30
Suraj Kandpal
809f3dd0c9 drm/i915/psr: Change psr size limits check
Change the check to only check for psr size limits till Pre-Xe2
since after that the psr size is equal to maximum pipe size anyways.

--v2
-Check only size limit until pre-Xe2 [Matt]

--v3
-Make sure psr_max_{h,v} and max_bpp are equal to crtc_{h,v}_display
and pipe_bpp [Ankit]

Bspec: 69885, 68858
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028130012.199090-1-suraj.kandpal@intel.com
2024-10-29 10:46:44 +05:30