With 'unevaluatedProperties' support implemented, the ti,rti-wdt example
has the following warning:
/home/rob/proj/git/linux-dt/.build-arm64/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.example.dt.yaml: watchdog@2200000: Unevaluated properties are not allowed ('assigned-clock-parents' was unexpected)
The problem is the schema has a typo in 'assigned-clocks-parents'. As
it is not required to list assigned clocks in bindings, just drop the
property definitions to fix this.
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211206174028.2294330-1-robh@kernel.org
There are valid cases when two nodes can have the same address. For
example, in Exynos SoCs there is USI IP-core, which might be configured
to provide UART, SPI or I2C block, all of which having the same base
register address. But only one can be enabled at a time. That looks like
this:
usi@138200c0 {
serial@13820000 {
status = "okay";
};
i2c@13820000 {
status = "disabled";
};
};
When running "make dt_binding_check", it reports next warning:
Warning (unique_unit_address):
/example-0/usi@138200c0/serial@13820000:
duplicate unit-address (also used in node
/example-0/usi@138200c0/i2c@13820000)
Disable "unique_unit_address" in DTC_FLAGS to suppress warnings like
that, but enable "unique_unit_address_if_enabled" warning, so that dtc
still reports a warning when two enabled nodes are having the same
address.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211203183517.11390-1-semen.protsenko@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Both are already used by HW and drivers inside Linux.
Fix warnings as:
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dt.yaml: ethernet@0,2: fixed-link:speed:0:0: 2500 is not one of [10, 100, 1000]
From schema: Documentation/devicetree/bindings/net/ethernet-controller.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20211124202046.81136-1-david@ixit.cz
Signed-off-by: Rob Herring <robh@kernel.org>
Few Texas Instruments DC-DC converters on PMBus like TPS544B20 do not
have bindings and are used only as hardware monitoring sensor. These
devices are actually not trivial and can receive basic configuration
(e.g. power up mode, CNTL pin polarity, expected input voltage), however
devicetree support for configuration was never added.
Therefore in current state the devices are used only in read-only mode
and have trivial bindings, so document them to have basic dtschema
tests.
Cc: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211116110207.68494-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
When converting the thermal-zones bindings to yaml the definition of the
contribution property changed. The intention is the same, an integer
value expressing a ratio of a sum on how much cooling is provided by the
device to the zone. But after the conversion the integer value is
limited to the range 0 to 100 and expressed as a percentage.
This is problematic for two reasons.
- This do not match how the binding is used. Out of the 18 files that
make use of the property only two (ste-dbx5x0.dtsi and
ste-hrefv60plus.dtsi) sets it at a value that satisfy the binding,
100. The remaining 16 files set the value higher and fail to validate.
- Expressing the value as a percentage instead of a ratio of the sum is
confusing as there is nothing to enforce the sum in the zone is not
greater then 100.
This patch restore the pre yaml conversion description and removes the
value limitation allowing the usage of the bindings to validate.
Fixes: 1202a442a3 ("dt-bindings: thermal: Add yaml bindings for thermal zones")
Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20211109103045.1403686-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Rob Herring <robh@kernel.org>
In the struct supplier_bindings the member 'node_not_dev' is described as
"The consumer node containing the property is never a device.", but that is
inconsistent with the behaviour of the code in of_link_property(), as it
calls of_get_compat_node() that starts parsing for a compatible property
from the node it gets passed to it. The proper behaviour is to start at the
node's parent, so let's do that.
While at it, let's take the opportunity to update the description of the
'node_not_dev' flag, as to clarify its purpose.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210902090221.820254-1-ulf.hansson@linaro.org
Pull xfs cleanups from Darrick Wong:
"The most 'exciting' aspect of this branch is that the xfsprogs
maintainer and I have worked through the last of the code
discrepancies between kernel and userspace libxfs such that there are
no code differences between the two except for #includes.
IOWs, diff suffices to demonstrate that the userspace tools behave the
same as the kernel, and kernel-only bits are clearly marked in the
/kernel/ source code instead of just the userspace source.
Summary:
- Clean up open-coded swap() calls.
- A little bit of #ifdef golf to complete the reunification of the
kernel and userspace libxfs source code"
* tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: sync xfs_btree_split macros with userspace libxfs
xfs: #ifdef out perag code for userspace
xfs: use swap() to make dabtree code cleaner
Pull more parisc fixes from Helge Deller:
"Fix a build error in stracktrace.c, fix resolving of addresses to
function names in backtraces, fix single-stepping in assembly code and
flush userspace pte's when using set_pte_at()"
* tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/entry: fix trace test in syscall exit path
parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
parisc: Fix implicit declaration of function '__kernel_text_address'
parisc: Fix backtrace to always include init funtion names
Pull arch/sh updates from Rich Felker.
* tag 'sh-for-5.16' of git://git.libc.org/linux-sh:
sh: pgtable-3level: Fix cast to pointer from integer of different size
sh: fix READ/WRITE redefinition warnings
sh: define __BIG_ENDIAN for math-emu
sh: math-emu: drop unused functions
sh: fix kconfig unmet dependency warning for FRAME_POINTER
sh: Cleanup about SPARSE_IRQ
sh: kdump: add some attribute to function
maple: fix wrong return value of maple_bus_init().
sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/
sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y
sh: boards: Fix the cacography in irq.c
sh: check return code of request_irq
sh: fix trivial misannotations
Pull ARM fixes from Russell King:
- Fix early_iounmap
- Drop cc-option fallbacks for architecture selection
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9156/1: drop cc-option fallbacks for architecture selection
ARM: 9155/1: fix early early_iounmap()
