Having 1280 bytes of local variables on the stack exceeds the limit
on 32-bit architectures:
drivers/firmware/cirrus/test/cs_dsp_test_bin.c: In function 'bin_patch_mixed_packed_unpacked_random':
drivers/firmware/cirrus/test/cs_dsp_test_bin.c:2097:1: error: the frame size of 1784 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Use dynamic allocation for the largest two here.
Fixes: dd0b6b1f29 ("firmware: cs_dsp: Add KUnit testing of bin file download")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241216121541.3455880-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Original sample-card assumes SND_SOC_CLOCK_IN is used for
snd_soc_dai_set_sysclk(), but someday, Codec uses SND_SOC_CLOCK_IN
and CPU uses SND_SOC_CLOCK_OUT at hw_params(), and dai->clk_direction
is used at simple_init_dai().
There is no uniformity today. Let's use dai->clk_direction for all cases.
Fortunately, almost all DAI doesn't care about "dir"
(= SND_SOC_CLOCK_IN/OUT) in .set_sysclk callback function (which is called
in snd_soc_dai_set_sysclk()), so this patch has no effect in such DAIs.
But this patch might breaks some existing Sound Card. Use
"system-clock-direction-out" property if it needs to use SND_SOC_CLOCK_OUT
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87y10lu0gx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit a22ae72b86 ("ASoC: soc-core: disable route checks for legacy
devices") added card->disable_route_checks to disable route checks
for legacy devices at soc_probe_component() and snd_soc_bind_card().
And commit 6974857c2b ("ASoC: topology: Do not ignore route checks
when parsing graphs") tidyup soc-topology for same reason.
In snd_soc_bind_card() case, if snd_soc_dapm_add_routes() (A) error,
but has card->disable_route_checks case (B), it will indicate
dev_info() only, and then, next function (C) will be called.
Thus, "ret" will be over written, and it is handled as non-error.
static int snd_soc_bind_card(...)
{
...
(A) ret = snd_soc_dapm_add_routes(...);
if (ret < 0) {
(B) if (card->disable_route_checks) {
dev_info(...);
} else {
...
goto probe_end;
}
}
(C) ret = snd_soc_dapm_add_routes(...);
...
In soc_probe_component() case, if snd_soc_dapm_add_routes() (a)
error, and has card->disable_route_checks case (b), it will indicate
dev_info(). But there is no next function after that, this means ret is
still indicating error, and will not be over written.
So error handline (c) will be handled, and will return error (d)
static int soc_probe_component(...)
{
...
(a) ret = snd_soc_dapm_add_routes(...);
if (ret < 0) {
(b) if (card->disable_route_checks) {
dev_info(...);
} else {
...
goto err_probe;
}
}
/* see for_each_card_components */
list_add(...);
err_probe:
(c) if (ret < 0)
soc_remove_component(...);
(d) return ret;
}
In soc_tplg_dapm_graph_elems_load() case, snd_soc_dapm_add_routes()
is called in for loop (1). if it was error (2), and doesn't have
card->disable_route_checks case flag (3), it will break from loop.
If card has flag, it will indicate dev_info() and handled as non-error.
But ret is still indicating error in this case. If this error happen
in last of loop, if will return error (4).
static int soc_tplg_dapm_graph_elems_load(...)
{
...
(1) for (i = 0; i < count; i++) {
...
(2) ret = snd_soc_dapm_add_routes(...);
if (ret) {
(3) if (!dapm->card->disable_route_checks) {
dev_err(...);
break;
}
dev_info(...);
}
}
(4) return ret;
}
This patch set "ret = 0" for each case.
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Cc: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87wmg5tzra.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
This function is base on the accelerator implementation
for compress API:
04177158cf ("ALSA: compress_offload: introduce accel operation mode")
Audio signal processing also has the requirement for memory to
memory similar as Video.
This asrc memory to memory (memory ->asrc->memory) case is a non
real time use case.
User fills the input buffer to the asrc module, after conversion, then asrc
sends back the output buffer to user. So it is not a traditional ALSA playback
and capture case.
Because we had implemented the "memory -> asrc ->i2s device-> codec"
use case in ALSA. Now the "memory->asrc->memory" needs
to reuse the code in asrc driver, so the patch 1 and patch 2 is for refining
the code to make it can be shared by the "memory->asrc->memory"
driver.
Other change is to add memory to memory support for two kinds of i.MX ASRC
modules.
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This series adds KUnit tests for the cs_dsp module.
Most of the functionality in cs_dsp is for downloading firmware to
DSP memory and interacting with "control" words defined in that
memory. This doesn't require any emulation of running firmware,
because it is only reading and writing registers. So the testing can
be done using a dummy regmap. The way this is used to perform testing
is described in more detail in the commit message for each test.
ADSP1 is not tested because this was only used by the WM2200 codec,
a long-obsolete part that was discontinued in 2015.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
A new set of tokens have been added to SOF topology to indicate that the pause
operation is supported or not on the given PCM device.
Pause is an optional feature that depends on pipeline, topology and modules
used by the PCM.
Add a pause_supported flag to snd_sof_pcm_stream and use this flag in Intel
platform code to keep the pause support enabled or to disable it.
Add tests for various types of errors and illegal values in
wmfw files. This covers buffer overflows as well as general
unsupported field values.
There are several sets of test cases to cover various different
versions of the wmfw file format.
V0 format was only used on the earlier ADSP2 devices. It does
not have algorithm blocks.
V1 format is used on all ADSP2 versions. It added algorithm
blocks and firmware coefficient descriptor blocks. Strings
are stored in fixed-length arrays.
V2 format is used on all ADSP2 versions. It is similar to V1
but space for strings is variable-length with either an 8-bit
or 16-bit length field.
V3 format is used on Halo Core DSPs and is mostly identical to
the V3 format.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add KUnit test cases for control read/write.
Tests cases cover general reading and writing of controls:
1) Read/write at offset position in control.
2) Read/write of various lengths less than length of the control.
3) Rejecting illegal arguments.
The test cases are run for ADSP2 with 16-bit registers, ADSP2
with 32-bit registers and Halo Core with 32-bit registers. The
ADSP2 cases are further divided into runs for V1 and V2 format
WMFW files, because there are differences in how V1 and V2
defines controls.
The obsolete V0 format does not have controls, so no testing of
that format is needed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-10-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add KUnit test cases for the caching of control content.
The test cases can be divided into four groups:
1) The cache is correctly initialized when the firmware is first
downloaded.
2) Reads return the correct data.
3) Writes update the registers and cache.
4) If a value has been written to the control it is retained in
the cache and written out to the registers when the firmware
is started.
There are multiple test suites to cover:
- V1 and V2 format files on 16-bit and 32-bit ADSP2.
- V3 format files on Halo Core DSPs.
V1 format files, and some V2 format files, didn't provide access
flags for the controls. There are a couple of test cases for
unspecified flags to ensure backwards compatibility with the
original implementation of these older firmware versions.
The obsolete V0 format does not have controls, so no testing of
that format is needed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add KUnit test cases for parsing of firmware controls out of the
wmfw. These test cases are only testing that the data in the wmfw
is correctly interpreted and entered into the list of controls.
The test cases can be roughly divided into three types:
1) The correct values are extracted from the wmfw.
2) Variable-length strings are handled correctly.
3) Controls are correctly identified as unique or identical.
There are multiple test suites to cover:
- V1 and V2 format files on 16-bit and 32-bit ADSP2.
- V3 format files on Halo Core DSPs.
V1 format does not have named controls, and the strings in the
coefficient descriptor are fixed-length fields. On V2 and V3 format
the controls are named and all strings are variable-length.
The obsolete V0 format does not have controls, so no testing of
that format is needed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds a KUnit test suite to test downloading wmfw files.
The general technique is
1. Create mock wmfw file content
2. Tell cs_dsp to download the wmfw file
3. Check in the emulated regmap registers that the correct values have
been written to DSP memory
4. Drop the regmap cache for the expected written registers and then do a
regcache_sync() to check for unexpected writes to other registers.
The test covers ADSP2 v1 and v2, and HALO Core DSPs. (ADSP1 is very
obsolete so isn't tested).
There is a large number of test cases and parameterized variants of tests
because of the many different addressing schemes supported by the Cirrus
devices. The DSP has 2 or 3 memory spaces: XM, YM and ZM. The DSP sees
these using its native addressing, which is word-addressed (not
byte-addressed). The host sees these through one of several register
mappings (depending on the DSP type and parent codec family). The
registers have three different addressing schemes: 16-bit registers
addressed by register number, 32-bit registers addressed by register
number, or 32-bit registers addressed by byte (with a stride of 4). In
addition to these multiple addressing schemes, the Halo Core DSPs have a
"packed" register mapping that maps 4 DSP words into 3 registers. In
addition to this there are 4 versions of the wmfw file format to be
tested.
The test cases intentionally have relatively little factoring-out of
similar code. This makes it much easier to visually verify that a test
case is testing correctly, and what exactly it is testing. Factoring out
large amounts of code into helper functions tends to obscure what the
actual test procedure is, so increasing the chance of hidden errors where
test cases don't actually test as intended.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds a KUnit test suite to test downloading bin files.
The general technique is
1. Create mock bin file content
2. Tell cs_dsp to download the bin file
3. Check in the emulated regmap registers that the correct values have
been written to DSP memory
4. Drop the regmap cache for the expected written registers and then do a
regcache_sync() to check for unexpected writes to other registers.
The test covers ADSP2 v1 and v2, and HALO Core DSPs. (ADSP1 is very
obsolete so isn't tested).
There is a large number of test cases and parameterized variants of tests
because of the many different addressing schemes supported by the Cirrus
devices. The DSP has 2 or 3 memory spaces: XM, YM and ZM. The DSP sees
these using its native addressing, which is word-addressed (not
byte-addressed). The host sees these through one of several register
mappings (depending on the DSP type and parent codec family). The
registers have three different addressing schemes: 16-bit registers
addressed by register number, 32-bit registers addressed by register
number, or 32-bit registers addressed by byte (with a stride of 4). In
addition to these multiple addressing schemes, the Halo Core DSPs have a
"packed" register mapping that maps 4 DSP words into 3 registers. The bin
file addresses the data blob relative to the base address of an algorithm,
which has to be calculated in both DSP words (for the DSP to access) and
register addresses (for the host).
This results in many different addressing schemes used in parallel, hence
the complexity of the address and size manipulation in the test cases:
word addresses in DSP memory, byte offsets, word offsets, register
addresses (either byte-addressed 32-bit or index-addressed 16-bit), and
packed register addresses.
The test cases intentionally have relatively little factoring-out of
similar code. This makes it much easier to visually verify that a test
case is testing correctly, and what exactly it is testing. Factoring out
large amounts of code into helper functions tends to obscure what the
actual test procedure is, so increasing the chance of hidden errors where
test cases don't actually test as intended.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a mock firmware file that emulates what the firmware build tools
would normally create. This will be used by KUnit tests to generate a
test bin file.
The data payload in a bin is an opaque blob, so the mock bin only needs
to generate the appropriate file header and description block for each
payload blob.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper functions to implement an emulation of the DSP memory map.
There are three main groups of functionality:
1. Define a mock cs_dsp_region table.
2. Calculate the addresses of memory and algorithms from the firmware
header in XM.
3. Build a mock XM header in emulated XM.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a mock regmap implementation to act as a simulated DSP for KUnit
testing. This is built as a utility module so that it could be used by
clients of cs_dsp to create a mock "DSP" for their own testing.
cs_dsp interacts with the DSP only through registers. Most of the
register space of the DSP is RAM. ADSP cores have a small set of control
registers. HALO Core DSPs have a much larger set of control registers but
only a small subset are used.
Most writes are "blind" in the sense that cs_dsp does not expect to
receive any sort of response from the DSP. So there isn't any need to
emulate a "DSP", only a set of registers that can be written and read
back.
The idea of the mock regmap is to use the cache to accumulate writes
which can then be tested against the values that are expected to be in
the registers.
Stray writes can be detected by dropping the cache entries for all
addresses that should have been written and then issuing a regcache_sync().
If this causes bus writes it means there were writes to unexpected
registers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
New tokens are added to topology:
1202: SOF_TKN_STREAM_PLAYBACK_PAUSE_SUPPORTED
1203: SOF_TKN_STREAM_CAPTURE_PAUSE_SUPPORTED
The new tokens are used to advertise support for PAUSE/RESUME operation on
a PCM device depending on firmware product, use case, pipeline topology.
The snd_sof_pcm_stream.pause_supported is updated to reflect the advertised
value for the PCM device.
If the token does not exist then the pause_supported is set to false.
Note: it is up to the platform code to use this flag to decide to advertise
the PAUSE support for user space or not.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20241213101123.27318-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASRC can be used on memory to memory case, define several
functions for m2m usage.
m2m_prepare: prepare for the start step
m2m_start: the start step
m2m_unprepare: unprepare for stop step, optional
m2m_stop: stop step
m2m_check_format: check format is supported or not
m2m_calc_out_len: calculate output length according to input length
m2m_get_maxburst: burst size for dma
m2m_pair_suspend: suspend function of pair, optional.
m2m_pair_resume: resume function of pair
get_output_fifo_size: get remaining data size in FIFO
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20241212074509.3445859-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add 'pcm_format' for struct snd_codec, add 'pcm_formats' for
struct snd_codec_desc, these are used for accelerator usage.
Current accelerator example is sample rate converter (SRC).
Define struct snd_codec_desc_src for descript minmum and maxmum
sample rates. And add 'src_d' in union snd_codec_options
structure. These are mainly used for capbility query.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20241212074509.3445859-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Claudiu <claudiu.beznea@tuxon.dev>:
Series enables the audio support for the Renesas RZ/G3S
SoC along with runtime PM and suspend to RAM.
The SSIF-2 IP is available on the Renesas RZ/G3S SoC. The Renesas RZ/G3S
SoC supports a power-saving mode where power to most of the SoC
components is turned off. Add suspend/resume support to the SSIF-2 driver
to support this power-saving mode.
On SNDRV_PCM_TRIGGER_SUSPEND trigger the SSI is stopped (the stream
user pointer is left untouched to avoid breaking user space and the dma
buffer pointer is set to zero), on SNDRV_PCM_TRIGGER_RESUME software reset
is issued for the SSIF-2 IP and the clocks are re-configured.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241210170953.2936724-18-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The code initially issued software reset on SNDRV_PCM_TRIGGER_START
action only before starting the first stream. This can be easily moved to
hw_params() as the action is similar to setting the clocks. Moreover,
according to the hardware manual (Table 35.7 Bits Initialized by Software
Reset of the SSIFCR.SSIRST Bit) the software reset action acts also on the
clock dividers bits. Due to this issue the software reset in hw_params()
before configuring the clock dividers. This also simplifies the code in
trigger API.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241210170953.2936724-17-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The stop trigger invokes rz_ssi_stop() and rz_ssi_stream_quit().
- The purpose of rz_ssi_stop() is to disable TX/RX, terminate DMA
transactions, and set the controller to idle.
- The purpose of rz_ssi_stream_quit() is to reset the substream-specific
software data by setting strm->running and strm->substream appropriately.
The function rz_ssi_is_stream_running() checks if both strm->substream and
strm->running are valid and returns true if so. Its implementation is as
follows:
static inline bool rz_ssi_is_stream_running(struct rz_ssi_stream *strm)
{
return strm->substream && strm->running;
}
When the controller is configured in full-duplex mode (with both playback
and capture active), the rz_ssi_stop() function does not modify the
controller settings when called for the first substream in the full-duplex
setup. Instead, it simply sets strm->running = 0 and returns if the
companion substream is still running. The following code illustrates this:
static int rz_ssi_stop(struct rz_ssi_priv *ssi, struct rz_ssi_stream *strm)
{
strm->running = 0;
if (rz_ssi_is_stream_running(&ssi->playback) ||
rz_ssi_is_stream_running(&ssi->capture))
return 0;
// ...
}
The controller settings, along with the DMA termination (for the last
stopped substream), are only applied when the last substream in the
full-duplex setup is stopped.
While applying the controller settings only when the last substream stops
is not problematic, terminating the DMA operations for only one substream
causes failures when starting and stopping full-duplex operations multiple
times in a loop.
To address this issue, call dmaengine_terminate_async() for both substreams
involved in the full-duplex setup when the last substream in the setup is
stopped.
Fixes: 4f8cd05a43 ("ASoC: sh: rz-ssi: Add full duplex support")
Cc: stable@vger.kernel.org
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20241210170953.2936724-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
These patches tidyup simple-card-utils for Multi connection of
Audio Graph Card, Because of DT node parsing, it should check port
1st instead of endpoint. Otherwise, it can't handle DAI correctly.
