The rport lock gets initialized during offload. If a non-FCP or non-target
rport got logout then this rport will be uninitialized. KASAN was
complaining because of it.
=========
[ 14.384434] the code is fine but needs lockdep annotation.
[ 14.384482] turning off the locking correctness validator.
========
Link: https://lore.kernel.org/r/20200807110656.19965-2-jhasan@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MSM bus scaling has moved on to use interconnect framework and downstream
bus scaling APIs like msm_bus_scale*() do not exist anymore in the
kernel. Currently they are guarded by a config which also does not exist
and hence there are no build failures reported. Remove these unused
interfaces as they are currently no-ops and the scaling support that may be
added in future will use interconnect API.
Link: https://lore.kernel.org/r/20200804161033.15586-1-saiprakash.ranjan@codeaurora.org
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If driver has not received the interrupt for the aborted SCSI command
before processing the TM reply, driver polls all the reply descriptor pools
looking for the reply for the aborted SCSI command before marking TM as
FAILED. If it finds the reply, then it marks the TM as SUCCESS otherwise it
marks it FAILED.
scsih_tm_cmd_map_status() checks whether TM has aborted the timed out SCSI
command or not. If TM has aborted the IO, then it returns SUCCESS else it
returns FAILED.
Link: https://lore.kernel.org/r/1596096229-3341-7-git-send-email-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It is not recommended to issue back-to-back host reset without any delay.
However, if someone issues back-to-back host reset then we observe that
target devices get unregistered and re-register with SML. And if OS drive
is behind the HBA when it gets unregistered, then file-system goes into
read-only mode.
Normally during host reset, driver marks accessible target devices as
responding and triggers the event MPT3SAS_REMOVE_UNRESPONDING_DEVICES to
remove any non-responding devices through FW worker thread. While
processing this event, driver unregisters the non-responding devices and
clears the responding flag for all the devices.
Currently, during host reset, driver is cancelling only those Firmware
event works which are pending in Firmware event workqueue. It is not
cancelling work which is currently running. Change the driver to cancel all
events.
Link: https://lore.kernel.org/r/1596096229-3341-4-git-send-email-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently config_cmds.reply buffer is not memset to zero before posting
config page request message. In some cases, for the current config
request, the previous config reply is getting processed and we will observe
PageType mismatch between request to reply buffer. It will be difficult to
debug this type of issue and it confuses by thinking that HBA Firmware
itself posted the wrong config reply. So it is better to memset the
config_cmds.reply buffer with zeros before issuing the config request.
Link: https://lore.kernel.org/r/1596096229-3341-2-git-send-email-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In current UFS task abort hook, namely ufshcd_abort(), if one task is
aborted successfully, clk_gating.active_reqs held by this task is not
decreased, which makes clk_gating.active_reqs stay above zero forever, thus
clock gating would never happen. Instead of releasing resources of one task
"manually", use the existing func __ufshcd_transfer_req_compl(). This
change also eliminates a possible race of scsi_dma_unmap() from the real
completion in IRQ handler path.
Link: https://lore.kernel.org/r/1596975355-39813-10-git-send-email-cang@codeaurora.org
Fixes: 1ab27c9cf8 ("ufs: Add support for clock gating")
CC: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The current IRQ handler blocks SCSI requests before scheduling eh_work,
when error handler calls pm_runtime_get_sync, if ufshcd_suspend/resume
sends a SCSI cmd, most likely the SSU cmd, since SCSI requests are blocked,
pm_runtime_get_sync() will never return because ufshcd_suspend/resume is
blocked by the SCSI cmd.
- In queuecommand path, hba->ufshcd_state check and ufshcd_send_command
should stay under the same spin lock. This is to make sure that no more
commands leak into doorbell after hba->ufshcd_state is changed.
- Don't block SCSI requests before error handler starts to run, let error
handler block SCSI requests when it is ready to start error recovery.
- Don't let SCSI layer keep requeuing the SCSI cmds sent from HBA runtime
PM ops, let them pass or fail them. Let them pass if eh_work is
scheduled due to non-fatal errors. Fail them if eh_work is scheduled due
to fatal errors, otherwise the cmds may eventually time out since UFS is
in bad state, which gets error handler blocked for too long. If we fail
the SCSI cmds sent from HBA runtime PM ops, HBA runtime PM ops fails
too, but it does not hurt since error handler can recover HBA runtime PM
error.
Link: https://lore.kernel.org/r/1596975355-39813-9-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The current error handler can not recover HBA runtime PM error if
ufshcd_suspend/resume has failed due to UFS errors, e.g. hibern8 enter/exit
error or SSU cmd error. When this happens, error handler may fail
performing a full reset and restore because error handler always assumes
that power, IRQs and clocks are ready after pm_runtime_get_sync returns,
but actually they are not if ufshcd_resume fails[1].
If ufschd_suspend/resume fails due to UFS errors, runtime PM framework
saves the error value to dev.power.runtime_error. After that, HBA dev
runtime suspend/resume would not be invoked anymore unless runtime_error is
cleared[2].
In case of ufshcd_suspend/resume fails due to UFS errors, for scenario [1],
error handler cannot assume anything of pm_runtime_get_sync, meaning error
handler should explicitly turn ON powers, IRQs and clocks again. To get the
HBA runtime PM work as regard for scenario [2], error handler can clear the
runtime_error by calling pm_runtime_set_active() if full reset and restore
succeeds. And, more important, if pm_runtime_set_active() returns no error,
which means runtime_error has been cleared, we also need to resume those
scsi devices under HBA in case any of them has failed to be resumed due to
HBA runtime resume failure. This is to unblock blk_queue_enter in case
there are bios waiting inside it.
Link: https://lore.kernel.org/r/1596975355-39813-7-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Error recovery can be invoked from multiple code paths, including hibern8
enter/exit (from ufshcd_link_recovery), ufshcd_eh_host_reset_handler() and
eh_work scheduled from IRQ context. Ultimately, these paths are all trying
to invoke ufshcd_reset_and_restore() in either a synchronous or
asynchronous manner. This causes problems:
- If link recovery happens during ungate work, ufshcd_hold() would be
called recursively. Although commit 53c12d0ef6 ("scsi: ufs: fix error
recovery after the hibern8 exit failure") fixed a deadlock due to
recursive calls of ufshcd_hold() by adding a check of eh_in_progress
into ufshcd_hold, this check allows eh_work to run in parallel while
link recovery is running.
- Similar concurrency can also happen when error recovery is invoked from
ufshcd_eh_host_reset_handler and ufshcd_link_recovery.
- Concurrency can even happen between eh_works. eh_work, currently queued
on system_wq, is allowed to have multiple instances running in parallel,
but we don't have proper protection for that.
If any of above concurrency scenarios happen, error recovery would fail and
lead ufs device and host into bad states. To fix the concurrency problem,
this change queues eh_work on a single threaded workqueue and removes link
recovery calls from the hibern8 enter/exit path. In addition, make use of
eh_work in eh_host_reset_handler instead of calling
ufshcd_reset_and_restore. This unifies the UFS error recovery mechanism.
According to the UFSHCI JEDEC spec, hibern8 enter/exit error occurs when
the link is broken. This essentially applies to any power mode change
operations (since they all use PACP_PWR cmds in UniPro layer). So, if a
power mode change operation (including AH8 enter/exit) fails, mark link
state as UIC_LINK_BROKEN_STATE and schedule the eh_work. In this case,
error handler needs to do a full reset and restore to recover the link back
to active. Before the link state is recovered to active,
ufshcd_uic_pwr_ctrl simply returns -ENOLINK to avoid more errors.
Link: https://lore.kernel.org/r/1596975355-39813-6-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull io_uring fixes from Jens Axboe:
"A few differerent things in here.
Seems like syzbot got some more io_uring bits wired up, and we got a
handful of reports and the associated fixes are in here.
General fixes too, and a lot of them marked for stable.
Lastly, a bit of fallout from the async buffered reads, where we now
more easily trigger short reads. Some applications don't really like
that, so the io_read() code now handles short reads internally, and
got a cleanup along the way so that it's now easier to read (and
documented). We're now passing tests that failed before"
* tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block:
io_uring: short circuit -EAGAIN for blocking read attempt
io_uring: sanitize double poll handling
io_uring: internally retry short reads
io_uring: retain iov_iter state over io_read/io_write calls
task_work: only grab task signal lock when needed
io_uring: enable lookup of links holding inflight files
io_uring: fail poll arm on queue proc failure
io_uring: hold 'ctx' reference around task_work queue + execute
fs: RWF_NOWAIT should imply IOCB_NOIO
io_uring: defer file table grabbing request cleanup for locked requests
io_uring: add missing REQ_F_COMP_LOCKED for nested requests
io_uring: fix recursive completion locking on oveflow flush
io_uring: use TWA_SIGNAL for task_work uncondtionally
io_uring: account locked memory before potential error case
io_uring: set ctx sq/cq entry count earlier
io_uring: Fix NULL pointer dereference in loop_rw_iter()
io_uring: add comments on how the async buffered read retry works
io_uring: io_async_buf_func() need not test page bit
Commit 1355c31eeb ("asm-generic: pgalloc: provide generic pmd_alloc_one()
and pmd_free_one()") converted parisc to use generic version of
pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for
PMD.
Restore the original version of pmd_alloc_one() for parisc, just use
GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and
memset.
Fixes: 1355c31eeb ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.ee
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull block fixes from Jens Axboe:
"A few fixes on the block side of things:
- Discard granularity fix (Coly)
- rnbd cleanups (Guoqing)
- md error handling fix (Dan)
- md sysfs fix (Junxiao)
- Fix flush request accounting, which caused an IO slowdown for some
configurations (Ming)
- Properly propagate loop flag for partition scanning (Lennart)"
* tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block:
block: fix double account of flush request's driver tag
loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE
rnbd: no need to set bi_end_io in rnbd_bio_map_kern
rnbd: remove rnbd_dev_submit_io
md-cluster: Fix potential error pointer dereference in resize_bitmaps()
block: check queue's limits.discard_granularity in __blkdev_issue_discard()
md: get sysfs entry after redundancy attr group create
Pull RISC-V fix from Palmer Dabbelt:
"I collected a single fix during the merge window: we managed to break
the early trap setup on !MMU, this fixes it"
* tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Setup exception vector for nommu platform
Pull arch/sh updates from Rich Felker:
"Cleanup, SECCOMP_FILTER support, message printing fixes, and other
changes to arch/sh"
* tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits)
sh: landisk: Add missing initialization of sh_io_port_base
sh: bring syscall_set_return_value in line with other architectures
sh: Add SECCOMP_FILTER
sh: Rearrange blocks in entry-common.S
sh: switch to copy_thread_tls()
sh: use the generic dma coherent remap allocator
sh: don't allow non-coherent DMA for NOMMU
dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
sh: unexport register_trapped_io and match_trapped_io_handler
sh: don't include <asm/io_trapped.h> in <asm/io.h>
sh: move the ioremap implementation out of line
sh: move ioremap_fixed details out of <asm/io.h>
sh: remove __KERNEL__ ifdefs from non-UAPI headers
sh: sort the selects for SUPERH alphabetically
sh: remove -Werror from Makefiles
sh: Replace HTTP links with HTTPS ones
arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*
sh: stacktrace: Remove stacktrace_ops.stack()
sh: machvec: Modernize printing of kernel messages
sh: pci: Modernize printing of kernel messages
...
One case was missed in the short IO retry handling, and that's hitting
-EAGAIN on a blocking attempt read (eg from io-wq context). This is a
problem on sockets that are marked as non-blocking when created, they
don't carry any REQ_F_NOWAIT information to help us terminate them
instead of perpetually retrying.
Fixes: 227c0c9673 ("io_uring: internally retry short reads")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's a bit of confusion on the matching pairs of poll vs double poll,
depending on if the request is a pure poll (IORING_OP_POLL_ADD) or
poll driven retry.
Add io_poll_get_double() that returns the double poll waitqueue, if any,
and io_poll_get_single() that returns the original poll waitqueue. With
that, remove the argument to io_poll_remove_double().
Finally ensure that wait->private is cleared once the double poll handler
has run, so that remove knows it's already been seen.
Cc: stable@vger.kernel.org # v5.8
Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com
Fixes: 18bceab101 ("io_uring: allow POLL_ADD with double poll_wait() users")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull more perf tools updates from Arnaldo Carvalho de Melo:
"Fixes:
- Fixes for 'perf bench numa'.
- Always memset source before memcpy in 'perf bench mem'.
- Quote CC and CXX for their arguments to fix build in environments
using those variables to pass more than just the compiler names.
- Fix module symbol processing, addressing regression detected via
"perf test".
- Allow multiple probes in record+script_probe_vfs_getname.sh 'perf
test' entry.
Improvements:
- Add script to autogenerate socket family name id->string table from
copy of kernel header, used so far in 'perf trace'.
- 'perf ftrace' improvements to provide similar options for this
utility so that one can go from 'perf record', 'perf trace', etc to
'perf ftrace' just by changing the name of the subcommand.
- Prefer new "sched:sched_waking" trace event when it exists in 'perf
sched' post processing.
- Update POWER9 metrics to utilize other metrics.
- Fall back to querying debuginfod if debuginfo not found locally.
Miscellaneous:
- Sync various kvm headers with kernel sources"
* tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits)
perf ftrace: Make option description initials all capital letters
perf build-ids: Fall back to debuginfod query if debuginfo not found
perf bench numa: Remove dead code in parse_nodes_opt()
perf stat: Update POWER9 metrics to utilize other metrics
perf ftrace: Add change log
perf: ftrace: Add set_tracing_options() to set all trace options
perf ftrace: Add option --tid to filter by thread id
perf ftrace: Add option -D/--delay to delay tracing
perf: ftrace: Allow set graph depth by '--graph-opts'
perf ftrace: Add support for trace option tracing_thresh
perf ftrace: Add option 'verbose' to show more info for graph tracer
perf ftrace: Add support for tracing option 'irq-info'
perf ftrace: Add support for trace option funcgraph-irqs
perf ftrace: Add support for trace option sleep-time
perf ftrace: Add support for tracing option 'func_stack_trace'
perf tools: Add general function to parse sublevel options
perf ftrace: Add option '--inherit' to trace children processes
perf ftrace: Show trace column header
perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size
perf ftrace: Factor out function write_tracing_file_int()
...
Pull x86 fixes from Ingo Molnar:
"Misc fixes and small updates all around the place:
- Fix mitigation state sysfs output
- Fix an FPU xstate/sxave code assumption bug triggered by
Architectural LBR support
- Fix Lightning Mountain SoC TSC frequency enumeration bug
- Fix kexec debug output
- Fix kexec memory range assumption bug
- Fix a boundary condition in the crash kernel code
- Optimize porgatory.ro generation a bit
- Enable ACRN guests to use X2APIC mode
- Reduce a __text_poke() IRQs-off critical section for the benefit of
PREEMPT_RT"
* tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Acquire pte lock with interrupts enabled
x86/bugs/multihit: Fix mitigation reporting when VMX is not in use
x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs
x86/purgatory: Don't generate debug info for purgatory.ro
x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC
kexec_file: Correctly output debugging information for the PT_LOAD ELF header
kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges
x86/crash: Correct the address boundary of function parameters
x86/acrn: Remove redundant chars from ACRN signature
x86/acrn: Allow ACRN guest to use X2APIC mode
Pull scheduler fixes from Ingo Molnar:
"Two fixes: fix a new tracepoint's output value, and fix the formatting
of show-state syslog printouts"
* tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Fix the alignment of the show-state debug output
sched: Fix use of count for nr_running tracepoint
Pull perf fixes from Ingo Molnar:
"Misc fixes, an expansion of perf syscall access to CAP_PERFMON
privileged tools, plus a RAPL HW-enablement for Intel SPR platforms"
* tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Add support for Intel SPR platform
perf/x86/rapl: Support multiple RAPL unit quirks
perf/x86/rapl: Fix missing psys sysfs attributes
hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration
kprobes: Remove show_registers() function prototype
perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability
Pull locking fixlets from Ingo Molnar:
"A documentation fix and a 'fallthrough' macro update"
* tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Convert to use the preferred 'fallthrough' macro
Documentation/locking/locktypes: Fix a typo
Pull 9p updates from Dominique Martinet:
- some code cleanup
- a couple of static analysis fixes
- setattr: try to pick a fid associated with the file rather than the
dentry, which might sometimes matter
* tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux:
9p: Remove unneeded cast from memory allocation
9p: remove unused code in 9p
net/9p: Fix sparse endian warning in trans_fd.c
9p: Fix memory leak in v9fs_mount
9p: retrieve fid from file when file instance exist.
Pull cifs fixes from Steve French:
"Three small cifs/smb3 fixes, one for stable fixing mkdir path with
the 'idsfromsid' mount option"
* tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: Fix mkdir when idsfromsid configured on mount
cifs: Convert to use the fallthrough macro
cifs: Fix an error pointer dereference in cifs_mount()
Pull NFS client updates from Trond Myklebust:
"Stable fixes:
- pNFS: Don't return layout segments that are being used for I/O
- pNFS: Don't move layout segments off the active list when being used for I/O
Features:
- NFS: Add support for user xattrs through the NFSv4.2 protocol
- NFS: Allow applications to speed up readdir+statx() using AT_STATX_DONT_SYNC
- NFSv4.0 allow nconnect for v4.0
Bugfixes and cleanups:
- nfs: ensure correct writeback errors are returned on close()
- nfs: nfs_file_write() should check for writeback errors
- nfs: Fix getxattr kernel panic and memory overflow
- NFS: Fix the pNFS/flexfiles mirrored read failover code
- SUNRPC: dont update timeout value on connection reset
- freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS
- sunrpc: destroy rpc_inode_cachep after unregister_filesystem"
* tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (32 commits)
NFS: Fix flexfiles read failover
fs: nfs: delete repeated words in comments
rpc_pipefs: convert comma to semicolon
nfs: Fix getxattr kernel panic and memory overflow
NFS: Don't return layout segments that are in use
NFS: Don't move layouts to plh_return_segs list while in use
NFS: Add layout segment info to pnfs read/write/commit tracepoints
NFS: Add tracepoints for layouterror and layoutstats.
NFS: Report the stateid + status in trace_nfs4_layoutreturn_on_close()
SUNRPC dont update timeout value on connection reset
nfs: nfs_file_write() should check for writeback errors
nfs: ensure correct writeback errors are returned on close()
NFSv4.2: xattr cache: get rid of cache discard work queue
NFS: remove redundant initialization of variable result
NFSv4.0 allow nconnect for v4.0
freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS
sunrpc: destroy rpc_inode_cachep after unregister_filesystem
NFSv4.2: add client side xattr caching.
NFSv4.2: hook in the user extended attribute handlers
NFSv4.2: add the extended attribute proc functions.
...
Pull edac fix from Tony Luck:
"Fix for the ie31200 driver that missed the first pull"
* tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/ie31200: Fallback if host bridge device is already initialized
Pull devicetree fixes from Rob Herring:
"Another round of 'allOf' removals and whitespace clean-ups of schemas"
* tag 'devicetree-fixes-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Remove more cases of 'allOf' containing a '$ref'
dt-bindings: Whitespace clean-ups in schema files
Pull more ACPI updates from Rafael Wysocki:
"Add new hardware support to the ACPI driver for AMD SoCs, the x86 clk
driver and the Designware i2c driver (changes from Akshu Agrawal and
Pu Wen)"
* tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
clk: x86: Support RV architecture
ACPI: APD: Add a fmw property is_raven
clk: x86: Change name from ST to FCH
ACPI: APD: Change name from ST to FCH
i2c: designware: Add device HID for Hygon I2C controller
Pull one more power management update from Rafael Wysocki:
"Modify the intel_pstate driver to allow it to work in the passive mode
with hardware-managed P-states (HWP) enabled"
* tag 'pm-5.9-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Implement passive mode with HWP enabled
Pull MFD updates from Lee Jones:
"Core Frameworks
- Make better attempt at matching device with the correct OF node
- Allow batch removal of hierarchical sub-devices
New Drivers
- Add STM32 Clocksource driver
- Add support for Khadas System Control Microcontroller
Driver Removal
- Remove unused driver for TI's SMSC ECE1099
New Device Support
- Add support for Intel Emmitsburg PCH to Intel LPSS PCI
- Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI
- Add support for Dialog DA revision to Dialog DA9063
New Functionality
- Add support for AXP803 to be probed by I2C
Fix-ups
- Numerous W=1 warning fixes
- Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller)
- Enabled Regmap 'fast I/O' in stm32-lptimer
- Change BUG_ON to WARN_ON in arizona-core
- Remove superfluous code/initialisation (madera, max14577)
- Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private)
- Switch to of_platform_populate() in sprd-sc27xx-spi
- Expand out set/get brightness/pwm macros in lm3533-ctrlbank
- Disable IRQs on suspend in motorola-cpcap
- Clean-up error handling in intel_soc_pmic_mrfld
- Ensure correct removal order of sub-devices in madera
- Many s/HTTP/HTTPS/ link changes
- Ensure name used with Regmap is unique in syscon
Bug Fixes
- Properly 'put' clock on unbind and error in arizona-core
- Fix revision handling in da9063
- Fix 'assignment of read-only location' error in kempld-core
- Avoid using the Regmap API when atomic in rn5t618
- Redefine volatile register description in rn5t618
- Use locking to protect event handler in dln2"
* tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
mfd: syscon: Use a unique name with regmap_config
mfd: Replace HTTP links with HTTPS ones
mfd: dln2: Run event handler loop under spinlock
mfd: madera: Improve handling of regulator unbinding
mfd: mfd-core: Add mechanism for removal of a subset of children
mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
mfd: max14577: Remove redundant initialization of variable current_bits
mfd: rn5t618: Fix caching of battery related registers
mfd: max77693-private: Drop a duplicated word
mfd: da9055: pdata.h: Drop a duplicated word
mfd: rn5t618: Make restart handler atomic safe
mfd: kempld-core: Fix 'assignment of read-only location' error
mfd: axp20x: Allow the AXP803 to be probed by I2C
mfd: da9063: Add support for latest DA silicon revision
mfd: da9063: Fix revision handling to correctly select reg tables
dt-bindings: mfd: st,stmfx: Remove I2C unit name
dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
mfd: motorola-cpcap: Disable interrupt for suspend
mfd: smsc-ece1099: Remove driver
mfd: core: Add OF_MFD_CELL_REG() helper
...
Merge more updates from Andrew Morton:
"Subsystems affected by this patch series: mm/hotfixes, lz4, exec,
mailmap, mm/thp, autofs, sysctl, mm/kmemleak, mm/misc and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
virtio: pci: constify ioreadX() iomem argument (as in generic implementation)
ntb: intel: constify ioreadX() iomem argument (as in generic implementation)
rtl818x: constify ioreadX() iomem argument (as in generic implementation)
iomap: constify ioreadX() iomem argument (as in generic implementation)
sh: use generic strncpy()
sh: clkfwk: remove r8/r16/r32
include/asm-generic/vmlinux.lds.h: align ro_after_init
mm: annotate a data race in page_zonenum()
mm/swap.c: annotate data races for lru_rotate_pvecs
mm/rmap: annotate a data race at tlb_flush_batched
mm/mempool: fix a data race in mempool_free()
mm/list_lru: fix a data race in list_lru_count_one
mm/memcontrol: fix a data race in scan count
mm/page_counter: fix various data races at memsw
mm/swapfile: fix and annotate various data races
mm/filemap.c: fix a data race in filemap_fault()
mm/swap_state: mark various intentional data races
mm/page_io: mark various intentional data races
mm/frontswap: mark various intentional data races
mm/kmemleak: silence KCSAN splats in checksum
...
