A a potential race condition reported by one of my customers that leads to
a NULL pointer dereference, where the call to efi.get_variable should be
guarded with efi_rt_services_supported() to ensure that function exists.
Fixes: 4fe2385134 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A bug reported by one of my customers that the order of TAS2781
calibrated-data is incorrect, the correct way is to move R0_Low
and insert it between R0 and InvR0.
Fixes: 4fe2385134 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250907222728.988-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 05f254a636 ("ALSA: usb-audio:
Improve filtering of sample rates on Focusrite devices") changed the
check for max_rate in a way which was overly restrictive, forcing
devices to use very high samplerates if they support them, despite
support existing for lower rates as well.
This maintains the intended outcome (ensuring samplerates selected are
supported) while allowing devices with higher maximum samplerates to be
opened at all supported samplerates.
This patch was tested with a Clarett+ 8Pre USB
Fixes: 05f254a636 ("ALSA: usb-audio: Improve filtering of sample rates on Focusrite devices")
Signed-off-by: Tina Wuest <tina@wuest.me>
Link: https://patch.msgid.link/20250901092024.140993-1-tina@wuest.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The tasdev_load_calibrated_data() function expects the calibration data
values in the cali_data buffer as R0, R0Low, InvR0, Power, TLim which
is not the same as what tas2563_save_calibration() writes to the buffer.
Reorder the EFI variables in the tas2563_save_calibration() function
to put the values in the buffer in the correct order.
Fixes: 4fe2385134 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://patch.msgid.link/20250829160450.66623-2-soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Before conversion to unify the calibration data management, the
tas2563_apply_calib() function performed the big endian conversion and
wrote the calibration data to the device. The writing is now done by the
common tasdev_load_calibrated_data() function, but without conversion.
Put the values into the calibration data buffer with the expected
endianness.
Fixes: 4fe2385134 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://patch.msgid.link/20250829160450.66623-1-soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ALSA HwDep character device of the firewire-motu driver incorrectly
returns EPOLLOUT in poll(2), even though the driver implements no operation
for write(2). This misleads userspace applications to believe write() is
allowed, potentially resulting in unnecessarily wakeups.
This issue dates back to the driver's initial code added by a commit
71c3797779 ("ALSA: firewire-motu: add hwdep interface"), and persisted
when POLLOUT was updated to EPOLLOUT by a commit a9a08845e9 ('vfs: do
bulk POLL* -> EPOLL* replacement("").').
This commit fixes the bug.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/20250829233749.366222-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC: Fixes for v6.17
The main fixes here are for some of the cleanups done in the core in
this release, we had broken component lookup in the case with a single
bus and DMA controller. Otherwise it's driver specific changes, the
shortlogs for the Intel WCL and rsnd drivers look like minor cleanups
but are actually bugfixes (adding an op needed for correct functionality
and reverting an inappropriate helper usage).
For Intel SKL and KBL platforms, it may be bound with one of three
HD-audio drivers (AVS, SOF and legacy). AVS is the preferred one when
DMIC is detected, and that's how it's defined in the snd-intel-dspcfg
config table.
But, when AVS driver is disabled (CONFIG_SND_SOC_INTEL_AVS=n), the
device may be bound freely with either SOF or legacy driver.
Before 6.17, the legacy driver took it primarily, but on 6.17, likely
due to the recent code shuffling, SOF driver seems taking it at first,
and fails to probe. For avoiding the regression, we should enforce to
bind those with the legacy HD-audio drvier when AVS is disabled.
This patch adds the extra two entries in intel-dspcfg table that are
applied only when CONFIG_SND_SOC_INTEL_AVS=n, for binding with the
legacy driver.
Note that there are entries for APL in that config table block, but
APL may be supported by SOF for certain setups, so the choice can't be
exclusive. Hence this patch includes only SKL and KBL.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1248121
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250828141101.16294-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit ad781b550f ("ALSA: hda/hdmi: Rewrite to new probe method")
rewrote the HDMI codec ID tables to a new format. In doing so, recently
added codec IDs from commit e0a911ac86 ("ALSA: hda: Add missing NVIDIA
HDA codec IDs") were dropped from the tables. These tables had recently
been split from the unified table that existed in patch_hdmi.c, and did
contain the entries in question after the split but before the codec ID
entries were rewritten to the new format.
Restore the missing codec ID entries to nvhdmi.c and tegrahdmi.c. There
do not appear to be any additional missing entries in any of the other
codec ID tables when compared to the patch_hdmi.c at the final revision
before the split.
Fixes: ad781b550f ("ALSA: hda/hdmi: Rewrite to new probe method")
Signed-off-by: Daniel Dadap <ddadap@nvidia.com>
Link: https://patch.msgid.link/aK0ghvagXy740rxd@ddadap-lakeline.nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Because snd_dmaengine_pcm is sharing same dev with CPU and Platform,
snd_soc_lookup_component_nolocked() might be call with NULL driver name
(= CPU). This patch fixup and cleanup it.
soc-generic-dmaengine-pcm.c uses same dev for both CPU and Platform.
In such case, CPU component driver might not have driver->name, then
snd_soc_lookup_component_nolocked() will be NULL pointer access error.
Care NULL driver name.
Call trace:
strcmp from snd_soc_lookup_component_nolocked+0x64/0xa4
snd_soc_lookup_component_nolocked from snd_soc_unregister_component_by_driver+0x2c/0x44
snd_soc_unregister_component_by_driver from snd_dmaengine_pcm_unregister+0x28/0x64
snd_dmaengine_pcm_unregister from devres_release_all+0x98/0xfc
devres_release_all from device_unbind_cleanup+0xc/0x60
device_unbind_cleanup from really_probe+0x220/0x2c8
really_probe from __driver_probe_device+0x88/0x1a0
__driver_probe_device from driver_probe_device+0x30/0x110
driver_probe_device from __driver_attach+0x90/0x178
__driver_attach from bus_for_each_dev+0x7c/0xcc
bus_for_each_dev from bus_add_driver+0xcc/0x1ec
bus_add_driver from driver_register+0x80/0x11c
driver_register from do_one_initcall+0x58/0x23c
do_one_initcall from kernel_init_freeable+0x198/0x1f4
kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x28
Fixes: 144d6dfc74 ("ASoC: soc-core: merge snd_soc_unregister_component() and snd_soc_unregister_component_by_driver()")
Reported-by: J. Neuschäfer <j.ne@posteo.net>
Closes: https://lore.kernel.org/r/aJb311bMDc9x-dpW@probook
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reported-by: Ondřej Jirman <megi@xff.cz>
Closes: https://lore.kernel.org/r/arxpwzu6nzgjxvsndct65ww2wz4aezb5gjdzlgr24gfx7xvyih@natjg6dg2pj6
Tested-by: J. Neuschäfer <j.ne@posteo.net>
Message-ID: <87ect8ysv8.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull perf fix from Borislav Petkov:
- Fix a case where the events throttling logic operates on inactive
events
* tag 'perf_urgent_for_v6.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Avoid undefined behavior from stopping/starting inactive events
Pull x86 fixes from Borislav Petkov:
- Fix the GDS mitigation detection on some machines after the recent
attack vectors conversion
- Filter out the invalid machine reset reason value -1 when running as
a guest as in such cases the reason why the machine was rebooted does
not make a whole lot of sense
- Init the resource control machinery on Hygon hw in order to avoid a
division by zero and to actually enable the feature on hw which
supports it
* tag 'x86_urgent_for_v6.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Fix GDS mitigation selecting when mitigation is off
x86/CPU/AMD: Ignore invalid reset reason value
x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper
Pull modules fix from Daniel Gomez:
"This includes a fix part of the KSPP (Kernel Self Protection Project)
to replace the deprecated and unsafe strcpy() calls in the kernel
parameter string handler and sysfs parameters for built-in modules.
Single commit, no functional changes"
* tag 'modules-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
params: Replace deprecated strcpy() with strscpy() and memcpy()
Pull char/misc/iio fixes from Greg KH:
"Here are a small number of char/misc/iio and other driver fixes for
6.17-rc3. Included in here are:
- IIO driver bugfixes for reported issues
- bunch of comedi driver fixes
- most core bugfix
- fpga driver bugfix
- cdx driver bugfix
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: core: Drop device reference after usage in get_channel()
comedi: Make insn_rw_emulate_bits() do insn->n samples
comedi: Fix use of uninitialized memory in do_insn_ioctl() and do_insnlist_ioctl()
comedi: pcl726: Prevent invalid irq number
cdx: Fix off-by-one error in cdx_rpmsg_probe()
fpga: zynq_fpga: Fix the wrong usage of dma_map_sgtable()
iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe()
iio: light: as73211: Ensure buffer holes are zeroed
iio: adc: rzg2l_adc: Set driver data before enabling runtime PM
iio: adc: rzg2l: Cleanup suspend/resume path
iio: adc: ad7380: fix missing max_conversion_rate_hz on adaq4381-4
iio: adc: bd79124: Add GPIOLIB dependency
iio: imu: inv_icm42600: change invalid data error to -EBUSY
iio: adc: ad7124: fix channel lookup in syscalib functions
iio: temperature: maxim_thermocouple: use DMA-safe buffer for spi_read()
iio: adc: ad7173: prevent scan if too many setups requested
iio: proximity: isl29501: fix buffered read on big-endian systems
iio: accel: sca3300: fix uninitialized iio scan data
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.17-rc3 to resolve a bunch
of reported issues. Included in here are:
- typec driver fixes
- dwc3 new device id
- dwc3 driver fixes
- new usb-storage driver quirks
- xhci driver fixes
- other tiny USB driver fixes to resolve bugs
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci: fix host not responding after suspend and resume
usb: xhci: Fix slot_id resource race conflict
usb: typec: fusb302: Revert incorrect threaded irq fix
USB: core: Update kerneldoc for usb_hcd_giveback_urb()
usb: typec: maxim_contaminant: re-enable cc toggle if cc is open and port is clean
usb: typec: maxim_contaminant: disable low power mode when reading comparator values
usb: dwc3: Remove WARN_ON for device endpoint command timeouts
USB: storage: Ignore driver CD mode for Realtek multi-mode Wi-Fi dongles
usb: storage: realtek_cr: Use correct byte order for bcs->Residue
usb: chipidea: imx: improve usbmisc_imx7d_pullup()
kcov, usb: Don't disable interrupts in kcov_remote_start_usb_softirq()
usb: dwc3: pci: add support for the Intel Wildcat Lake
usb: dwc3: Ignore late xferNotReady event to prevent halt timeout
USB: storage: Add unusual-devs entry for Novatek NTK96550-based camera
usb: core: hcd: fix accessing unmapped memory in SINGLE_STEP_SET_FEATURE test
usb: renesas-xhci: Fix External ROM access timeouts
usb: gadget: tegra-xudc: fix PM use count underflow
usb: quirks: Add DELAY_INIT quick for another SanDisk 3.2Gen1 Flash Drive
Pull tracing fixes from Steven Rostedt:
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding
'.pc' files are not installed, it reports that the libraries are
missing and confuses the developer. Instead, report that the
pkg-config files are missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space
strings. If the parser fails due to incorrect processing, it doesn't
terminate the buffer with a nul byte. Add a "failed" flag to the
parser that gets set when parsing fails and is used to know if the
buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an
error path that can exit the function without unregistering it. Since
the function returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for
read, an iterator is created and sets its hash pointer to the
associated hash that represents filtering or notrace filtering to it.
The issue is that the hash it points to can change while the
iteration is happening. All the locking used to access the tracer's
hashes are released which means those hashes can change or even be
freed. Using the hash pointed to by the iterator can cause UAF bugs
or similar.
Have the read of these files allocate and copy the corresponding
hashes and use that as that will keep them the same while the
iterator is open. This also simplifies the code as opening it for
write already does an allocate and copy, and now that the read is
doing the same, there's no need to check which way it was opened on
the release of the file, and the iterator hash can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the
exit of a function. When the exit is right after the entry, it
combines the two events into one with the output of "function();",
instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events
includes storage that saves the entry event while it peaks at the
next event in the ring buffer. The peek can free the entry event so
the iterator must store the information to use it after the peek.
With the addition of function graph tracer recording the args, where
the args are a dynamic array in the entry event, the temp storage
does not save them. This causes the args to be corrupted or even
cause a read of unsafe memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer
will be printed to the console. But it can also be triggered by
sysrq-z. If a sysrq-z is triggered while a task is reading trace_pipe
it can cause a race in the ftrace_dump() where it checks if the
buffer has content, then it checks if the next event is available,
and then prints the output (regardless if the next event was
available or not). Reading trace_pipe at the same time can cause it
to not be available, and this triggers a WARN_ON in the print. Move
the printing into the check if the next event exists or not
* tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Also allocate and copy hash for reading of filter files
ftrace: Fix potential warning in trace_printk_seq during ftrace_dump
fgraph: Copy args in intermediate storage with entry
trace/fgraph: Fix the warning caused by missing unregister notifier
ring-buffer: Remove redundant semicolons
tracing: Limit access to parser->buffer when trace_get_user failed
rtla: Check pkg-config install
tools/latency-collector: Check pkg-config install
Pull driver core fixes from Danilo Krummrich:
- Fix swapped handling of lru_gen and lru_gen_full debugfs files in
vmscan
- Fix debugfs mount options (uid, gid, mode) being silently ignored
- Fix leak of devres action in the unwind path of Devres::new()
- Documentation:
- Expand and fix documentation of (outdated) Device, DeviceContext
and generic driver infrastructure
- Fix C header link of faux device abstractions
- Clarify expected interaction with the security team
- Smooth text flow in the security bug reporting process
documentation
* tag 'driver-core-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
Documentation: smooth the text flow in the security bug reporting process
Documentation: clarify the expected collaboration with security bugs reporters
debugfs: fix mount options not being applied
rust: devres: fix leaking call to devm_add_action()
rust: faux: fix C header link
driver: rust: expand documentation for driver infrastructure
device: rust: expand documentation for Device
device: rust: expand documentation for DeviceContext
mm/vmscan: fix inverted polarity in lru_gen_seq_show()
Pull drm fixes from Dave Airlie:
"Weekly drm fixes. Looks like things did indeed get busier after rc2,
nothing seems too major, but stuff scattered all over the place,
amdgpu, xe, i915, hibmc, rust support code, and other small fixes.
rust:
- drm device memory layout and safety fixes
tests:
- Endianness fixes
gpuvm:
- docs warning fix
panic:
- fix division on 32-bit arm
i915:
- TypeC DP display Fixes
- Silence rpm wakeref asserts on GEN11_GU_MISC_IIR access
- Relocate compression repacking WA for JSL/EHL
xe:
- xe_vm_create fixes
- fix vm bind ioctl double free
amdgpu:
- Replay fixes
- SMU14 fix
- Null check DC fixes
- DCE6 DC fixes
- Misc DC fixes
bridge:
- analogix_dp: devm_drm_bridge_alloc() error handling fix
habanalabs:
- Memory deallocation fix
hibmc:
- modesetting black screen fixes
- fix UAF on irq
- fix leak on i2c failure path
nouveau:
- memory leak fixes
- typos
rockchip:
- Kconfig fix
- register caching fix"
* tag 'drm-fixes-2025-08-23-1' of https://gitlab.freedesktop.org/drm/kernel: (49 commits)
drm/xe: Fix vm_bind_ioctl double free bug
drm/xe: Move ASID allocation and user PT BO tracking into xe_vm_create
drm/xe: Assign ioctl xe file handler to vm in xe_vm_create
drm/i915/gt: Relocate compression repacking WA for JSL/EHL
drm/i915: silence rpm wakeref asserts on GEN11_GU_MISC_IIR access
drm/amd/display: Fix DP audio DTO1 clock source on DCE 6.
drm/amd/display: Fix fractional fb divider in set_pixel_clock_v3
drm/amd/display: Don't print errors for nonexistent connectors
drm/amd/display: Don't warn when missing DCE encoder caps
drm/amd/display: Fill display clock and vblank time in dce110_fill_display_configs
drm/amd/display: Find first CRTC and its line time in dce110_fill_display_configs
drm/amd/display: Adjust DCE 8-10 clock, don't overclock by 15%
drm/amd/display: Don't overclock DCE 6 by 15%
drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session()
drm/amd/display: Fix Xorg desktop unresponsive on Replay panel
drm/amd/display: Avoid a NULL pointer dereference
drm/amdgpu/swm14: Update power limit logic
drm/amd/display: Revert Add HPO encoder support to Replay
drm/i915/icl+/tc: Convert AUX powered WARN to a debug message
drm/i915/lnl+/tc: Use the cached max lane count value
...
When calling ftrace_dump_one() concurrently with reading trace_pipe,
a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race
condition.
The issue occurs because:
CPU0 (ftrace_dump) CPU1 (reader)
echo z > /proc/sysrq-trigger
!trace_empty(&iter)
trace_iterator_reset(&iter) <- len = size = 0
cat /sys/kernel/tracing/trace_pipe
trace_find_next_entry_inc(&iter)
__find_next_entry
ring_buffer_empty_cpu <- all empty
return NULL
trace_printk_seq(&iter.seq)
WARN_ON_ONCE(s->seq.len >= s->seq.size)
In the context between trace_empty() and trace_find_next_entry_inc()
during ftrace_dump, the ring buffer data was consumed by other readers.
This caused trace_find_next_entry_inc to return NULL, failing to populate
`iter.seq`. At this point, due to the prior trace_iterator_reset, both
`iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal,
the WARN_ON_ONCE condition is triggered.
Move the trace_printk_seq() into the if block that checks to make sure the
return value of trace_find_next_entry_inc() is non-NULL in
ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before
subsequent operations.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@elte.hu>
Link: https://lore.kernel.org/20250822033343.3000289-1-wutengda@huaweicloud.com
Fixes: d769041f86 ("ring_buffer: implement new locking")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The output of the function graph tracer has two ways to display its
entries. One way for leaf functions with no events recorded within them,
and the other is for functions with events recorded inside it. As function
graph has an entry and exit event, to simplify the output of leaf
functions it combines the two, where as non leaf functions are separate:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) 0.391 us | __raise_softirq_irqoff();
2) 1.191 us | }
2) 2.086 us | }
The __raise_softirq_irqoff() function above is really two events that were
merged into one. Otherwise it would have looked like:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) | __raise_softirq_irqoff() {
2) 0.391 us | }
2) 1.191 us | }
2) 2.086 us | }
In order to do this merge, the reading of the trace output file needs to
look at the next event before printing. But since the pointer to the event
is on the ring buffer, it needs to save the entry event before it looks at
the next event as the next event goes out of focus as soon as a new event
is read from the ring buffer. After it reads the next event, it will print
the entry event with either the '{' (non leaf) or ';' and timestamps (leaf).
The iterator used to read the trace file has storage for this event. The
problem happens when the function graph tracer has arguments attached to
the entry event as the entry now has a variable length "args" field. This
field only gets set when funcargs option is used. But the args are not
recorded in this temp data and garbage could be printed. The entry field
is copied via:
data->ent = *curr;
Where "curr" is the entry field. But this method only saves the non
variable length fields from the structure.
Add a helper structure to the iterator data that adds the max args size to
the data storage in the iterator. Then simply copy the entire entry into
this storage (with size protection).
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250820195522.51d4a268@gandalf.local.home
Reported-by: Sasha Levin <sashal@kernel.org>
Tested-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/aJaxRVKverIjF4a6@lappy/
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull iommufd fixes from Jason Gunthorpe:
"Two very minor fixes:
- Fix mismatched kvalloc()/kfree()
- Spelling fixes in documentation"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Fix spelling errors in iommufd.rst
iommufd: viommu: free memory allocated by kvcalloc() using kvfree()
Bindig requires a node name matching ‘^ethernet@[0-9a-f]+$’. This patch
changes the clock name from “etop” to “ethernet”.
This fixes the following warning:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): $nodename:0: 'etop@e180000' does not match '^ethernet@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
Fixes: dac0bad937 ("dt-bindings: net: lantiq,etop-xway: Document Lantiq Xway ETOP bindings")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Jakub Kicinski <kuba@kernel.org>
The upstream dts lacks the lantiq,{rx/tx}-burst-length property. Other
issues were also fixed:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'interrupt-names' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,tx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,rx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
Fixes: 14d4e308e0 ("net: lantiq: configure the burst length in ethernet drivers")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Pull s390 fixes from Alexander Gordeev:
- When kernel lockdown is active userspace tools that rely on read
operations only are unnecessarily blocked. Fix that by avoiding ioctl
registration during lockdown
- Invalid NULL pointer accesses succeed due to the lowcore is always
mapped the identity mapping pinned to zero. To fix that never map the
first two pages of physical memory with identity mapping
- Fix invalid SCCB present check in the SCLP interrupt handler
- Update defconfigs
* tag 's390-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/hypfs: Enable limited access during lockdown
s390/hypfs: Avoid unnecessary ioctl registration in debugfs
s390/mm: Do not map lowcore with identity mapping
s390/sclp: Fix SCCB present check
s390/configs: Set HZ=1000
s390/configs: Update defconfigs
Pull xen fixes from Juergen Gross:
"Two small cleanups which are both relevant only when running as a Xen
guest"
* tag 'for-linus-6.17-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drivers/xen/xenbus: remove quirk for Xen 3.x
compiler: remove __ADDRESSABLE_ASM{_STR,}() again
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/hsmp:
- Ensure sock->metric_tbl_addr is non-NULL
- Register driver even if hwmon registration fails
- amd/pmc: Drop SMU F/W match for Cezanne
- dell-smbios-wmi: Separate "priority" from WMI device ID
- hp-wmi: mark Victus 16-r1xxx for Victus s fan and thermal profile
support
- intel-uncore-freq: Check write blocked for efficiency latency control
* tag 'platform-drivers-x86-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: hp-wmi: mark Victus 16-r1xxx for victus_s fan and thermal profile support
platform/x86/amd/hsmp: Ensure success even if hwmon registration fails
platform/x86/amd/hsmp: Ensure sock->metric_tbl_addr is non-NULL
platform/x86/intel-uncore-freq: Check write blocked for ELC
platform/x86/amd: pmc: Drop SMU F/W match for Cezanne
platform/x86: dell-smbios-wmi: Stop touching WMI device ID
Pull block fixes from Jens Axboe:
"A set of fixes for block that should go into this tree. A bit larger
than what I usually have at this point in time, a lot of that is the
continued fixing of the lockdep annotation for queue freezing that we
recently added, which has highlighted a number of little issues here
and there. This contains:
- MD pull request via Yu:
- Add a legacy_async_del_gendisk mode, to prevent a user tools
regression. New user tools releases will not use such a mode,
the old release with a new kernel now will have warning about
deprecated behavior, and we prepare to remove this legacy mode
after about a year later
- The rename in kernel causing user tools build failure, revert
the rename in mdp_superblock_s
- Fix a regression that interrupted resync can be shown as
recover from mdstat or sysfs
- Improve file size detection for loop, particularly for networked
file systems, by using getattr to get the size rather than the
cached inode size.
- Hotplug CPU lock vs queue freeze fix
- Lockdep fix while updating the number of hardware queues
- Fix stacking for PI devices
- Silence bio_check_eod() for the known case of device removal where
the size is truncated to 0 sectors"
* tag 'block-6.17-20250822' of git://git.kernel.dk/linux:
block: avoid cpu_hotplug_lock depedency on freeze_lock
block: decrement block_rq_qos static key in rq_qos_del()
block: skip q->rq_qos check in rq_qos_done_bio()
blk-mq: fix lockdep warning in __blk_mq_update_nr_hw_queues
block: tone down bio_check_eod
loop: use vfs_getattr_nosec for accurate file size
loop: Consolidate size calculation logic into lo_calculate_size()
block: remove newlines from the warnings in blk_validate_integrity_limits
block: handle pi_tuple_size in queue_limits_stack_integrity
selftests: ublk: Use ARRAY_SIZE() macro to improve code
md: fix sync_action incorrect display during resync
md: add helper rdev_needs_recovery()
md: keep recovery_cp in mdp_superblock_s
md: add legacy_async_del_gendisk mode
Pull io_uring fixes from Jens Axboe:
"Just two small fixes - one that fixes inconsistent ->async_data vs
REQ_F_ASYNC_DATA handling in futex, and a followup that just ensures
that if other opcode handlers mess this up, it won't cause any issues"
* tag 'io_uring-6.17-20250822' of git://git.kernel.dk/linux:
io_uring: clear ->async_data as part of normal init
io_uring/futex: ensure io_futex_wait() cleans up properly on failure
Pull SCSI fixes from James Bottomley:
"All fixes in drivers. The largest diffstat in ufs is caused by the doc
update with the next being the qcom null pointer deref fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-qcom: Fix ESI null pointer dereference
scsi: ufs: core: Rename ufshcd_wait_for_doorbell_clr()
scsi: ufs: core: Fix the return value documentation
scsi: ufs: core: Remove WARN_ON_ONCE() call from ufshcd_uic_cmd_compl()
scsi: ufs: core: Fix IRQ lock inversion for the SCSI host lock
scsi: qla4xxx: Prevent a potential error pointer dereference
scsi: ufs: ufs-pci: Add support for Intel Wildcat Lake
scsi: fnic: Remove a useless struct mempool forward declaration
