The current test just sends "hello\nworld" and verifies that is the
string received on the RX side. That is fine, but improve the test a bit
by sending 1K data. The test should be improved further to send more
data, but for now this should be a welcome improvement.
The test will send a repeating pattern of 0x01, 0x02, ... 0x06. The
ncdevmem `-v 7` flag will verify this pattern. ncdevmem will provide
useful debugging info when the test fails, such as the frags received
and verified fine, and which frag exactly failed, what was the expected
byte pattern, and what is the actual byte pattern received. All this
debug information will be useful when the test fails.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-8-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni says:
Recently the nipa CI infra went through some tuning, and the mentioned
self-test now often fails.
The failing test is the sctp+nfqueue one, where the file transfer takes
too long and hits the timeout (1 minute).
Because SCTP nfqueue tests had timeout related issues before (esp. on debug
kernels) print the file transfer duration in the PASS/FAIL message.
This would aallow us to see if there is/was an unexpected slowdown
(CI keeps logs around) or 'creeping slowdown' where things got slower
over time until 'fail point' was reached.
Output of altered lines looks like this:
PASS: tcp and nfqueue in forward chan (duration: 2s)
PASS: tcp via loopback (duration: 2s)
PASS: sctp and nfqueue in forward chain (duration: 42s)
PASS: sctp and nfqueue in output chain with GSO (duration: 21s)
Reported-by: Paolo Abeni <pabeni@redhat.com
Closes: https://lore.kernel.org/netdev/584524ef-9fd7-4326-9f1b-693ca62c5692@redhat.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250523121700.20011-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GENERIC_ALLOCATOR is a non-prompt kconfig, meaning users can't enable it
selectively. All kconfig users of GENERIC_ALLOCATOR select it, except of
NET_DEVMEM which only depends on it, there is no easy way to turn
GENERIC_ALLOCATOR on unless we select other unnecessary configs that
will select it.
Instead of depending on it, select it when NET_DEVMEM is enabled.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/1747950086-1246773-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function wait_local_port_listen() is the only function defined in
net_helper.sh. Since some tests source both lib.sh and net_helper.sh,
we can simplify the setup by moving wait_local_port_listen() to lib.sh.
With this change, net_helper.sh becomes redundant and can be removed.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250526014600.9128-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'struct thermal_zone_device_ops' are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
2912 1064 0 3976 f88 drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o
After:
=====
text data bss dec hex filename
3040 936 0 3976 f88 drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/e6416e0d15ea27a55fe1fb4e349928ac7bae1b95.1748164843.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'struct thermal_zone_device_ops' are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
While at it, also constify a struct thermal_zone_params.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
24899 8036 0 32935 80a7 drivers/net/ethernet/mellanox/mlxsw/core_thermal.o
After:
=====
text data bss dec hex filename
25379 7556 0 32935 80a7 drivers/net/ethernet/mellanox/mlxsw/core_thermal.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/4516676973f5adc1cdb76db1691c0f98b6fa6614.1748164348.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tipc_aead_free() function currently uses kfree() to release the aead
structure. However, this structure contains sensitive information, such
as key's SALT value, which should be securely erased from memory to
prevent potential leakage.
To enhance security, replace kfree() with kfree_sensitive() when freeing
the aead structure. This change ensures that sensitive data is explicitly
cleared before memory deallocation, aligning with the approach used in
tipc_aead_init() and adhering to best practices for handling confidential
information.
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250523114717.4021518-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the Python YNL extack decoding to handle sub-messages in the same
way that YNL C does. This involves retaining the input values so that
they are available during extack decoding.
./tools/net/ynl/pyynl/cli.py --family rt-link --do newlink --create \
--json '{
"linkinfo": {"kind": "netkit", "data": {"policy": 10} }
}'
Netlink error: Invalid argument
nl_len = 92 (76) nl_flags = 0x300 nl_type = 2
error: -22
extack: {'msg': 'Provided default xmit policy not supported', 'bad-attr': '.linkinfo.data(netkit).policy'}
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250523103031.80236-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Subbaraya Sundeep says:
====================
octeontx2-pf: Do not detect MACSEC block based on silicon
Out of various silicon variants of CN10K series some have hardware
MACSEC block for offloading MACSEC operations and some do not.
AF driver already has the information of whether MACSEC is present
or not on running silicon. Hence fetch that information from
AF via mailbox message.
====================
Link: https://patch.msgid.link/1747894516-4565-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There was an issue with SO_LINGER: instead of blocking until all queued
messages for the socket have been successfully sent (or the linger timeout
has been reached), close() would block until packets were handled by the
peer.
Add a test to alert on close() lingering when it should not.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-5-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lingering should be transport-independent in the long run. In preparation
for supporting other transports, as well as the linger on shutdown(), move
code to core.
Generalize by querying vsock_transport::unsent_bytes(), guard against the
callback being unimplemented. Do not pass sk_lingertime explicitly. Pull
SOCK_LINGER check into vsock_linger().
Flatten the function. Remove the nested block by inverting the condition:
return early on !timeout.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-2-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently vsock's lingering effectively boils down to waiting (or timing
out) until packets are consumed or dropped by the peer; be it by receiving
the data, closing or shutting down the connection.
To align with the semantics described in the SO_LINGER section of man
socket(7) and to mimic AF_INET's behaviour more closely, change the logic
of a lingering close(): instead of waiting for all data to be handled,
block until data is considered sent from the vsock's transport point of
view. That is until worker picks the packets for processing and decrements
virtio_vsock_sock::bytes_unsent down to 0.
Note that (some interpretation of) lingering was always limited to
transports that called virtio_transport_wait_close() on transport release.
This does not change, i.e. under Hyper-V and VMCI no lingering would be
observed.
The implementation does not adhere strictly to man page's interpretation of
SO_LINGER: shutdown() will not trigger the lingering. This follows AF_INET.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-1-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for the MaxLinear MxL86110 Gigabit Ethernet PHY, a low-power,
cost-optimized transceiver supporting 10/100/1000 Mbps over twisted-pair
copper, compliant with IEEE 802.3.
The driver implements basic features such as:
- Device initialization
- RGMII interface timing configuration
- Wake-on-LAN support
- LED initialization and control via /sys/class/leds
This driver has been tested on multiple Variscite boards, including:
- VAR-SOM-MX93 (i.MX93)
- VAR-SOM-MX8M-PLUS (i.MX8MP)
Example boot log showing driver probe:
[ 7.692101] imx-dwmac 428a0000.ethernet eth0:
PHY [stmmac-0:00] driver [MXL86110 Gigabit Ethernet] (irq=POLL)
Signed-off-by: Stefano Radaelli <stefano.radaelli21@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250521212821.593057-1-stefano.radaelli21@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason A. Donenfeld says:
====================
wireguard updates for 6.16
This small series contains mostly cleanups and one new feature:
1) Kees' __nonstring annotation comes to wireguard.
2) Two selftest fixes, one to help with compilation on gcc 15, and one
removing stale config options.
3) Adoption of NLA_POLICY_MASK.
4) Jordan has added the ability to run:
# wg set ... peer ... allowed-ips -192.168.1.0/24
Which will remove the allowed IP for that peer. Previously you had to
replace all the IPs non-atomically, or move it to a dummy peer
atomically, which wasn't very clean.
====================
Link: https://patch.msgid.link/20250521212707.1767879-1-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current netlink API for WireGuard does not directly support removal
of allowed ips from a peer. A user can remove an allowed ip from a peer
in one of two ways:
1. By using the WGPEER_F_REPLACE_ALLOWEDIPS flag and providing a new
list of allowed ips which omits the allowed ip that is to be removed.
2. By reassigning an allowed ip to a "dummy" peer then removing that
peer with WGPEER_F_REMOVE_ME.
With the first approach, the driver completely rebuilds the allowed ip
list for a peer. If my current configuration is such that a peer has
allowed ips 192.168.0.2 and 192.168.0.3 and I want to remove 192.168.0.2
the actual transition looks like this.
[192.168.0.2, 192.168.0.3] <-- Initial state
[] <-- Step 1: Allowed ips removed for peer
[192.168.0.3] <-- Step 2: Allowed ips added back for peer
This is true even if the allowed ip list is small and the update does
not need to be batched into multiple WG_CMD_SET_DEVICE requests, as the
removal and subsequent addition of ips is non-atomic within a single
request. Consequently, wg_allowedips_lookup_dst and
wg_allowedips_lookup_src may return NULL while reconfiguring a peer even
for packets bound for ips a user did not intend to remove leading to
unintended interruptions in connectivity. This presents in userspace as
failed calls to sendto and sendmsg for UDP sockets. In my case, I ran
netperf while repeatedly reconfiguring the allowed ips for a peer with
wg.
/usr/local/bin/netperf -H 10.102.73.72 -l 10m -t UDP_STREAM -- -R 1 -m 1024
send_data: data send error: No route to host (errno 113)
netperf: send_omni: send_data failed: No route to host
While this may not be of particular concern for environments where peers
and allowed ips are mostly static, systems like Cilium manage peers and
allowed ips in a dynamic environment where peers (i.e. Kubernetes nodes)
and allowed ips (i.e. pods running on those nodes) can frequently
change making WGPEER_F_REPLACE_ALLOWEDIPS problematic.
The second approach avoids any possible connectivity interruptions
but is hacky and less direct, requiring the creation of a temporary
peer just to dispose of an allowed ip.
Introduce a new flag called WGALLOWEDIP_F_REMOVE_ME which in the same
way that WGPEER_F_REMOVE_ME allows a user to remove a single peer from
a WireGuard device's configuration allows a user to remove an ip from a
peer's set of allowed ips. This enables incremental updates to a
device's configuration without any connectivity blips or messy
workarounds.
A corresponding patch for wg extends the existing `wg set` interface to
leverage this feature.
$ wg set wg0 peer <PUBKEY> allowed-ips +192.168.88.0/24,-192.168.0.1/32
When '+' or '-' is prepended to any ip in the list, wg clears
WGPEER_F_REPLACE_ALLOWEDIPS and sets the WGALLOWEDIP_F_REMOVE_ME flag on
any ip prefixed with '-'.
Signed-off-by: Jordan Rife <jordan@jrife.io>
[Jason: minor style nits, fixes to selftest, bump of wireguard-tools version]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250521212707.1767879-5-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a character array without a terminating NUL character has a static
initializer, GCC 15's -Wunterminated-string-initialization will only
warn if the array lacks the "nonstring" attribute[1]. Mark the arrays
with __nonstring to correctly identify the char array as "not a C string"
and thereby eliminate the warning:
../drivers/net/wireguard/cookie.c:29:56: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (9 chars into 8 available) [-Wunterminated-string-initialization]
29 | static const u8 mac1_key_label[COOKIE_KEY_LABEL_LEN] = "mac1----";
| ^~~~~~~~~~
../drivers/net/wireguard/cookie.c:30:58: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (9 chars into 8 available) [-Wunterminated-string-initialization]
30 | static const u8 cookie_key_label[COOKIE_KEY_LABEL_LEN] = "cookie--";
| ^~~~~~~~~~
../drivers/net/wireguard/noise.c:28:38: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (38 chars into 37 available) [-Wunterminated-string-initialization]
28 | static const u8 handshake_name[37] = "Noise_IKpsk2_25519_ChaChaPoly_BLAKE2s";
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/wireguard/noise.c:29:39: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (35 chars into 34 available) [-Wunterminated-string-initialization]
29 | static const u8 identifier_name[34] = "WireGuard v1 zx2c4 Jason@zx2c4.com";
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The arrays are always used with their fixed size, so use __nonstring.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250521212707.1767879-3-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kees Cook says:
====================
net: Convert dev_set_mac_address() to struct sockaddr_storage
As part of the effort to allow the compiler to reason about object sizes,
we need to deal with the problematic variably sized struct sockaddr,
which has no internal runtime size tracking. In much of the network
stack the use of struct sockaddr_storage has been adopted. Continue the
transition toward this for more of the internal APIs. Specifically:
- inet_addr_is_any()
- netif_set_mac_address()
- dev_set_mac_address()
- dev_set_mac_address_user()
Only a few callers of dev_set_mac_address() needed adjustment; all others
were already using struct sockaddr_storage internally.
v1: https://lore.kernel.org/all/20250520222452.work.063-kees@kernel.org/
====================
Link: https://patch.msgid.link/20250521204310.it.500-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of a heap allocating a variably sized struct sockaddr and lying
about the type in the call to netif_set_mac_address(), use a stack
allocated struct sockaddr_storage. This lets us drop the cast and avoid
the allocation.
Putting "ss" on the stack means it will get a reused stack slot since
it is the same size (128B) as other existing single-scope stack variables,
like the vfinfo array (128B), so no additional stack space is used by
this function.
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250521204619.2301870-7-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
