Martin Wilck <mwilck@suse.com> says:
This patch series addresses some issues we saw in a test setup with a
large number of SCSI LUNs. The first two patches simply increase the
number of available sg and bsg devices. 3-5 fix a large delay we
encountered between blocking a Fibre Channel remote port and the
dev_loss_tmo. 6 renames scsi_target_block() to scsi_block_targets(),
and makes additional changes to this API, as suggested in the review
of the v2 series. 7 improves a warning message.
Link: https://lore.kernel.org/r/20230614103616.31857-1-mwilck@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All callers (fc_remote_port_delete(), __iscsi_block_session(),
__srp_start_tl_fail_timers(), srp_reconnect_rport(), snic_tgt_del()) pass
parent devices of scsi_target devices to scsi_target_block().
Rename the function to scsi_block_targets(), and simplify it by assuming
that it is always passed a parent device. Also, have callers pass the
Scsi_Host pointer to scsi_block_targets(), as every caller has this pointer
readily available.
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Link: https://lore.kernel.org/r/20230614103616.31857-7-mwilck@suse.com
Cc: Karan Tilak Kumar <kartilak@cisco.com>
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi_device_block() is only called from scsi_target_block(), which calls it
repeatedly for every child device. For targets with many devices, waiting
for every queue to quiesce may cause a substantial delay (we measured more
than 100s delay for blocking a FC rport with 2048 LUNs).
Just call blk_mq_wait_quiesce_done() once from scsi_target_block() after
stopping all queues.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Link: https://lore.kernel.org/r/20230614103616.31857-6-mwilck@suse.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are three flags that control Write Booster Feature:
1. WB ON/OFF
2. WB Hibern Flush ON/OFF (implicitly)
3. WB Flush ON/OFF (explicit)
In the case of "Hibern Flush", one of the conditions for flush WB buffer is
that avail_wb_buff < wb_flush_threshold.
As we know, different users have different requirements for power
consumption and performance. Therefore, we need the ability to manually set
wb_flush_threshold, so that users can easily and flexibly adjust the
wb_flush_threshold value, thereby achieving a balance between power
consumption and performance.
So the sysfs attribute that controls this is necessary.
wb_flush_threshold represents the threshold for flushing WB buffer, whose
value expressed in unit of 10% granularity, such as '1' representing 10%,
'2' representing 20%, and so on.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Link: https://lore.kernel.org/r/20230613022240.16595-1-luhongfei@vivo.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that there is a new dedicated ICE driver, drop the ufs-qcom-ice and use
the new ICE api provided by the Qualcomm soc driver ice. The platforms that
already have ICE support will use the API as library since there will not
be a devicetree node, but instead they have reg range. In this case, the
of_qcom_ice_get will return an ICE instance created for the consumer's
device. But if there are platforms that do not have ice reg in the consumer
devicetree node and instead provide a dedicated ICE devicetree node, the
of_qcom_ice_get will look up the device based on qcom,ice property and will
get the ICE instance registered by the probe function of the ice driver.
The ICE clock is now handle by the new driver. This is done by enabling it
on the creation of the ICE instance and then enabling/disabling it on UFS
runtime resume/suspend.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230612192847.1599416-3-abel.vesa@linaro.org
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In MCQ mode, when a device command uses a hardware queue shared with other
commands, a race condition may occur in the following scenario:
1. A device command is completed in CQx with CQE entry "e".
2. The interrupt handler copies the "cqe" pointer to "hba->dev_cmd.cqe"
and completes "hba->dev_cmd.complete".
3. The "ufshcd_wait_for_dev_cmd()" function is awakened and retrieves the
OCS value from "hba->dev_cmd.cqe".
However, there is a possibility that the CQE entry "e" will be overwritten
by newly completed commands in CQx, resulting in an incorrect OCS value
being received by "ufshcd_wait_for_dev_cmd()".
To avoid this race condition, the OCS value should be immediately copied to
the struct "lrb" of the device command. Then "ufshcd_wait_for_dev_cmd()"
can retrieve the OCS value from the struct "lrb".
Fixes: 57b1c0ef89 ("scsi: ufs: core: mcq: Add support to allocate multiple queues")
Suggested-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Link: https://lore.kernel.org/r/20230610021553.1213-2-powen.kao@mediatek.com
Tested-by: Po-Wen Kao <powen.kao@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The introduction of the macro IOPRIO_PRIO_LEVEL() in commit eca2040972
("scsi: block: ioprio: Clean up interface definition") results in an
iopriority level to always be masked using the macro IOPRIO_LEVEL_MASK, and
thus to the kernel always seeing an acceptable value for an I/O priority
level when checked in ioprio_check_cap(). Before this patch, this function
would return an error for some (but not all) invalid values for a level
valid range of [0..7].
Restore and improve the detection of invalid priority levels by introducing
the inline function ioprio_value() to check an ioprio class, level and hint
value before combining these fields into a single value to be used with
ioprio_set() or AIOs. If an invalid value for the class, level or hint of
an ioprio is detected, ioprio_value() returns an ioprio using the class
IOPRIO_CLASS_INVALID, indicating an invalid value and causing
ioprio_check_cap() to return -EINVAL.
Fixes: 6c91325722 ("scsi: block: Introduce ioprio hints")
Fixes: eca2040972 ("scsi: block: ioprio: Clean up interface definition")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230608095556.124001-1-dlemoal@kernel.org
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
One-element arrays as fake flex arrays are deprecated and we are moving
towards adopting C99 flexible-array members, instead. So, replace
one-element array declaration in struct ct_sns_gpnft_rsp, which is
ultimately being used inside a union:
drivers/scsi/qla2xxx/qla_def.h:
3240 struct ct_sns_gpnft_pkt {
3241 union {
3242 struct ct_sns_req req;
3243 struct ct_sns_gpnft_rsp rsp;
3244 } p;
3245 };
Refactor the rest of the code, accordingly.
This issue was found with the help of Coccinelle.
Link: https://github.com/KSPP/linux/issues/245
Link: https://github.com/KSPP/linux/issues/193
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZH+/rZ1R1cBjIxjS@work
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored and
this typically results in resource leaks. To improve here there is a quest
to make the remove callback return void. In the first step of this quest
all drivers are converted to .remove_new() which already returns void.
hisi_sas_remove() returned zero unconditionally so this was changed to
return void. Then it has the right prototype to be used directly as remove
callback for the two hisi_sas drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230518202043.261739-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prevent any potential integer wrapping issue, and avoid a
-Wstringop-overflow warning by using the check_mul_overflow() helper.
drivers/scsi/lpfc/lpfc.h:
837:#define LPFC_RAS_MIN_BUFF_POST_SIZE (256 * 1024)
drivers/scsi/lpfc/lpfc_debugfs.c:
2266 size = LPFC_RAS_MIN_BUFF_POST_SIZE * phba->cfg_ras_fwlog_buffsize;
this can wrap to negative if cfg_ras_fwlog_buffsize is large
enough. And even when in practice this is not possible (due to
phba->cfg_ras_fwlog_buffsize never being larger than 4[1]), the
compiler is legitimately warning us about potentially buggy code.
Fix the following warning seen under GCC-13:
In function ‘lpfc_debugfs_ras_log_data’,
inlined from ‘lpfc_debugfs_ras_log_open’ at drivers/scsi/lpfc/lpfc_debugfs.c:2271:15:
drivers/scsi/lpfc/lpfc_debugfs.c:2210:25: warning: ‘memcpy’ specified bound between 18446744071562067968 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=]
2210 | memcpy(buffer + copied, dmabuf->virt,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2211 | size - copied - 1);
| ~~~~~~~~~~~~~~~~~~
Link: https://github.com/KSPP/linux/issues/305
Link: https://lore.kernel.org/linux-hardening/CABPRKS8zyzrbsWt4B5fp7kMowAZFiMLKg5kW26uELpg1cDKY3A@mail.gmail.com/ [1]
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZHkseX6TiFahvxJA@work
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_queuecommand() may be called two times in a row for a SCSI command
before it is completed. Hence make the following changes:
- In the functions that submit a command, do not check the old value of
lrbp->cmd nor clear lrbp->cmd in error paths.
- In ufshcd_release_scsi_cmd(), do not clear lrbp->cmd.
See also scsi_send_eh_cmnd().
This commit prevents that the following appears if a command times out:
WARNING: at drivers/ufs/core/ufshcd.c:2965 ufshcd_queuecommand+0x6f8/0x9a8
Call trace:
ufshcd_queuecommand+0x6f8/0x9a8
scsi_send_eh_cmnd+0x2c0/0x960
scsi_eh_test_devices+0x100/0x314
scsi_eh_ready_devs+0xd90/0x114c
scsi_error_handler+0x2b4/0xb70
kthread+0x16c/0x1e0
Fixes: 5a0b0cb9be ("[SCSI] ufs: Add support for sending NOP OUT UPIU")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230524203659.1394307-3-bvanassche@acm.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
One UFS vendor asked to increase the UFS timeout from 1 s to 3 s. Another
UFS vendor asked to increase the UFS timeout from 1 s to 10 s. Hence this
patch that increases the UFS timeout to 10 s. This patch can cause the
total timeout to exceed 20 s, the Android shutdown timeout. This is fine
since the loop around ufshcd_execute_start_stop() exists to deal with unit
attentions and because unit attentions are reported quickly.
Fixes: dcd5b7637c ("scsi: ufs: Reduce the START STOP UNIT timeout")
Fixes: 8f2c96420c ("scsi: ufs: core: Reduce the power mode change timeout")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230524203659.1394307-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
