For multi-planar formats, while calculating offsets in planes with index greater than 0
(ie second plane, third plane, etc), one needs to divide (src_x * cpp) with horizontal
chroma subsampling factor and (src_y * pitch) with vertical chroma subsampling factor.
The reason being that the planes contain subsampled (ie reduced) data (by a factor of 2) and thus
while calculating the byte position coresponding to the x and y co-ordinates, one needs to
divide it with the sampling factor.
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.kernel.org/patch/10569263/
0day reports:
>> drivers/gpu/drm/bridge/ti-sn65dsi86.o: In function
mipi_dsi_detach'
>> drivers/gpu/drm/bridge/ti-sn65dsi86.c:630: undefined reference to
ti_sn_bridge_attach':
>> drivers/gpu/drm/bridge/ti-sn65dsi86.c:249: undefined reference to
mipi_dsi_device_register_full'
>> drivers/gpu/drm/bridge/ti-sn65dsi86.c:276: undefined reference to
mipi_dsi_device_unregister'
Quite obviously the driver depends on DRM_MIPI_DSI.
We can not use depends since the driver configuration uses select,
so we'll have to select the missing dependency instead.
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180815194923.3258-1-sean@poorly.run
This was hand-rolled in the first version, and will surely be useful as
we expand the driver to support more varied use cases.
Changes in v2:
- Change subject prefix s/panel/bridge/
- Downgrade warning in poll function to error message
- Fix DP_EDP_CONFIGURATION_SET write value (Sandeep)
- Mask upper 8 bits of msg->address (Sandeep)
- Check aux cmd status for errors after completing the send (Sandeep)
- Remove length check since it's covered in the aux status
- Flip the READ check in transfer to WRITE check + early exit
Changes in v3:
- Added to the set
- Wrapped (x) in WDATA/RDATA #defines
- Replace readx_poll* with regmap_read_poll*
Cc: Sandeep Panda <spanda@codeaurora.org>
Reviewed-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180813213058.184821-4-sean@poorly.run
If qxl_alloc_client_monitors_config() fails to allocate
client_monitors_config then NULL pointer dereference occurs
in function qxl_display_copy_rom_client_monitors_config() after
qxl_alloc_client_monitors_config() call.
The patch adds return error from qxl_alloc_client_monitors_config()
and additional status for qxl_display_copy_rom_client_monitors_config
return value.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Link: http://patchwork.freedesktop.org/patch/msgid/20180727153058.23620-1-vasilyev@ispras.ru
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If qxl_device_init fails on creating resources and does not report it,
then qxl module will catch null pointer exception on remove, or on
probe's error path.
The patch adds error path with resources release into qxl_device_init.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Link: http://patchwork.freedesktop.org/patch/msgid/20180727115440.11112-1-vasilyev@ispras.ru
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The problem with 24bpp is that it is a rather unusual depth these days,
cirrus is pretty much the only relevant device still using that, and it
is a endless source of issues. Wayland doesn't support it at all. Bugs
in Xorg keep showing up.
Typically either 32bpp or 16bpp are used. Using 32bpp would limit the
resolution to 800x600 due to hardware constrains. So lets go with 16bpp.
Also use the default depth for the framebuffer console and
mode_info->preferred_depth.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180808111311.30311-1-kraxel@redhat.com
In the Cirrus driver, the regular clean-up code also performs the clean-up
of a failed initialization. If the fbdev's framebuffer was not initialized,
the clean-up will fail within drm_framebuffer_unregister_private. Booting
with cirrus.bpp=16 triggers this bug.
The framebuffer is currently stored directly within struct cirrus_fbdev. To
fix the bug, we turn it into a pointer that is only set for initialized
framebuffers. The fbdev's clean-up code skips uninitialized framebuffers.
The memory for struct drm_framebuffer is allocated dynamically. This requires
additional error handling within cirrusfb_create. The framebuffer clean-up is
now performed by drm_framebuffer_put, which also frees the data strcuture's
memory.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1101822
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180720112743.27159-1-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.
__drm_atomic_helper_plane_reset initializes the alpha property to its
max value, which is defined by the drm core as DRM_BLEND_ALPHA_OPAQUE,
so nothing changes regarding the alpha value.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-10-alexandru-cosmin.gheorghe@arm.com
Removing the drm_bridge_remove call should avoid a NULL dereference
during list processing in drm_bridge_remove if the error path is ever
taken.
The more natural approach would perhaps be to add a drm_bridge_add,
but there are several other bridges that never call drm_bridge_add.
Just removing the drm_bridge_remove is the easier fix.
Fixes: 84601dbdea ("drm: sti: rework init sequence")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806061910.29914-2-peda@axentia.se
A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.
__drm_atomic_helper_plane_reset initializes the alpha property to its
max value, which is defined by the drm core as DRM_BLEND_ALPHA_OPAQUE,
so nothing changes regarding the alpha value.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-9-alexandru-cosmin.gheorghe@arm.com
A new helper function(__drm_atomic_helper_plane_reset) has been added
for linking a plane with its state and resetting the core
properties(alpha, rotation, etc.) to their default values.
Use that instead of duplicating the logic.
__drm_atomic_helper_plane_reset initializes the alpha property to its
max value, which is defined by the drm core as DRM_BLEND_ALPHA_OPAQUE,
so nothing changes regarding the alpha value.
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-5-alexandru-cosmin.gheorghe@arm.com
There are a lot of drivers that subclass drm_plane_state, all of them
duplicate the code that links together the plane with plane_state.
On top of that, drivers that enable core properties also have to
duplicate the code for initializing the properties to their default
values, which in all cases are the same as the defaults from core.
Change since v1:
- Make it consistent with the other helpers and require that both
plane and state not be NULL, suggested by Boris Brezillon and
Philipp Zabel.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-2-alexandru-cosmin.gheorghe@arm.com
This patch implement the necessary functions to compute and add CRCs
entries:
- Implement the set_crc_source() callback.
- Compute CRC using crc32 on the visible part of the framebuffer.
- Use ordered workqueue per output to compute and add CRC at the end
of a vblank.
- Use appropriate synchronization methods since the CRC computation must
be atomic wrt the generated vblank event for a given atomic update, by
using spinlock across atomic_begin/atomic_flush to wrap the event
handling code completely and match the flip event with the CRC.
Since vkms_crc_work_handle() can sleep, spinlock can't be acquired
while accessing vkms_output->primary_crc to compute CRC.
To make sure the data is updated and released without conflict with
the vkms_crc_work_handle(), the work_struct is flushed @crtc_destroy
and the data is updated before scheduling the work handle again, as
follow:
* CRC data update:
1- store vkms_crc_data {fb, src} per plane_state
2- @plane_duplicate_state -> allocate vkms_crc_data
3- during atomic commit (@atomic_update) ->
a) copy {fb, src} to plane_state->crc_data
b) get reference to fb,
3- @plane_destroy_state -> a) if (fb refcount) remove reference to fb
b) deallocate crc_data
* Atomic Commit:
1- vkms_plane_atomic_check
2- vkms_prepare_fb -> vmap vkms_gem_obj->vaddr
3- atomic_begin -> hold crc spinlock
4- atomic_plane_update -> a) update vkms_output->primary_crc
b) get reference to fb
5- atomic_flush -> a) send vblank event while holding event_lock
b) release crc spinlock
* hrtimer regular callback:
1- hold crc spinlock
2- drm_crtc_handle_vblank()
3- queue vkms_crc_work_handle
4- release crc spinlock
* cleanup:
1- @cleanup_fb ->vunmap vkms_gem_obj->vaddr
2- @crtc_destroy -> flush work struct
3- @plane_destroy -> a) if (fb refcount) remove reference to fb
b) deallocate crc_data
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
[seanpaul fixed typo in vkms_crtc s/vblamk/vblank/]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b948327f48c3e70ab232b4a0848ee6d033b26484.1533171495.git.hamohammed.sa@gmail.com
