As per the config name this Display IC features a DSI command-mode
interface (or the command to switch to video mode is not
known/documented) and does not use any of the video-mode helper
utilities, hence should not select VIDEOMODE_HELPERS. In addition it
uses devm_gpiod_get() and related functions from GPIOLIB.
Fixes: 779679d3c1 ("drm/panel: Add support for S6E3HA8 panel driver")
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505-panel-clean-up-kconfig-dep-v2-3-9cc31d6e6919@ixit.cz
As per the config name this Display IC features a DSI command-mode
interface (or the command to switch to video mode is not
known/documented) and does not use any of the video-mode helper
utilities, hence should not select VIDEOMODE_HELPERS. In addition it
uses devm_gpiod_get() and related functions from GPIOLIB.
Fixes: 88148c30ef ("drm/panel: Add Samsung S6E3FC2X01 DDIC with AMS641RW panel")
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505-panel-clean-up-kconfig-dep-v2-2-9cc31d6e6919@ixit.cz
The function drm_of_get_data_lanes_count_remote() returns negative error
codes and dsi->lanes is an unsigned integer, so the check (dsi->lanes <
0) is always impossible.
Detected by Smatch:
drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c:2959 jadard_dsi_probe()
warn: unsigned 'dsi->lanes' is never less than zero.
Fixes: eb019688f2 ("drm/panel: jadard-jd9365da-h3: support variable DSI configuration")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260429024954.697411-1-ethantidmore06@gmail.com
drm_format_info_bpp() cannot be used for formats which do not have an
integer bits-per-pixel in a pixel block.
E.g. DRM_FORMAT_P030's plane 0 has three 10-bit pixels (Y components),
and two padding bits, in a 4 byte block. That is 10.666... bits per
pixel when considering the whole 4 byte block, which is what
drm_format_info_bpp() does. Thus a driver that supports such formats
cannot use drm_format_info_bpp(),
It is a driver bug if this happens, but so handle wrong calls by
printing a warning and returning 0.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-1-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
tve200_modeset_init() creates a panel bridge and initializes the DRM
mode config before tve200_probe() registers the DRM device. If
drm_dev_register() fails, probe returns an error and the driver's remove
callback is not called, so those modeset resources are left behind.
Unwind the panel bridge and mode config on that failure path before
disabling the clock and dropping the DRM device reference.
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260424124118.38649-1-mhun512@gmail.com
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251104111339.128685-1-marco.crivellari@suse.com
Set PM ops for the vesadrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-6-tzimmermann@suse.de
Set PM ops for the simpledrm driver. Suspend and resume the DRM
state on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-5-tzimmermann@suse.de
Set PM ops for the ofdrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-4-tzimmermann@suse.de
Set PM ops for the efidrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-3-tzimmermann@suse.de
Set PM ops for the corebootdrm driver. Suspend and resume the DRM
state on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-2-tzimmermann@suse.de
Replace vmwgfx's vblank timer with DRM's common implementation. The
timer handling is almost identical with a few additional bug fixes in
the common code.
Replace most of vmwgfx's vmw_vkms_get_vblank_timestamp() with the
shared helper drm_crtc_vblank_get_vblank_timeout(). The common helper
also works in the presence of delayed vblank timeouts that modify the
vblank counter concurrently.
Set the timeout handler to vmw_vkms_handle_vblank_timeout(). In addition
to handling vblank events, this function also controls CRC generation.
Remove all the hrtimer-related code from vmwgfx. DRM vblank timers
provides this.
v2:
- only cancel vblank timer in CRTC cleanup if vkms_enabled (Zack)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260427150250.699768-4-tzimmermann@suse.de
Decouple vblank handling from the underlying hrtimer. This will be
helpful for replacing vmwgfx's vblank timer with DRM's common
implementation.
The new helper vmw_vkms_handle_vblank_timeout() can later be used as
callback for DRM's handle_vblank call as-is. The helper also keeps the
current semantics for restarting the timer. It returns true to restart
the next vblank timeout even if it could not acquire vmwgfx's vblank
lock.
The remaining code in vmw_vkms_vblank_simulate() will be replaced by
the DRM implementation in a later patch.
v2:
- clarify return-value semantics in commit message (Zack)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260427150250.699768-3-tzimmermann@suse.de
Use the calculated duration of a frame as stored in the vblank state
for the lock-waiting timeout. Decouples the waiting from the details
of the vblank implementation. Both values should be equal.
This will be helpful for replacing vmwgfx's vblank timer with DRM's
common implementation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260427150250.699768-2-tzimmermann@suse.de
