Introduce a structure virtio_queue_info to carry name, callback and ctx
together. In order to allow config implementations to accept config op
with array of virtio_queue_info structures, introduce a new
find_vqs_info() op. Do the needed conversion in virtio_find_vqs_ctx().
Note that whole virtio_find_vqs_ctx() is going to be eventually removed
at the and of this patchset.
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-5-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to prepare for conversion of virtio_find_vqs*() arguments, make
virtio_find_single_vq() to call virtio_find_vqs() instead of
op directly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-4-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to prepare for conversion of virtio_find_vqs*() arguments, make
virtio_find_vqs() to call virtio_find_vqs_ctx() instead of op directly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-3-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vdpa device can be reset many times in sequence without any
significant state changes in between. Previously this was not a problem:
VQs were torn down only on first reset. But after VQ pre-creation was
introduced, each reset will delete and re-create the hardware VQs and
their associated resources.
To solve this problem, avoid resetting hardware VQs if the VQs are still
in a blank state.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-23-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are a few conditions under which the hardware VQs need a full
teardown and setup:
- VQ size changed to something else than default value. Hardware VQ size
modification is not supported.
- User turns off certain device features: mergeable buffers, checksum
virtio 1.0 compliance. In these cases, the TIR and RQT need to be
re-created.
Add a needs_teardown configuration variable and set it when detecting
the above scenarios. On next DRIVER_OK, the resources will be torn down
first.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-22-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, hardware VQs are created right when the vdpa device gets into
DRIVER_OK state. That is easier because most of the VQ state is known by
then.
This patch switches to creating all VQs and their associated resources
at device creation time. The motivation is to reduce the vdpa device
live migration downtime by moving the expensive operation of creating
all the hardware VQs and their associated resources out of downtime on
the destination VM.
The VQs are now created in a blank state. The VQ configuration will
happen later, on DRIVER_OK. Then the configuration will be applied when
the VQs are moved to the Ready state.
When .set_vq_ready() is called on a VQ before DRIVER_OK, special care is
needed: now that the VQ is already created a resume_vq() will be
triggered too early when no mr has been configured yet. Skip calling
resume_vq() in this case, let it be handled during DRIVER_OK.
For virtio-vdpa, the device configuration is done earlier during
.vdpa_dev_add() by vdpa_register_device(). Avoid calling
setup_vq_resources() a second time in that case.
On a 64 CPU, 256 GB VM with 1 vDPA device of 16 VQps, the full VQ
resource creation + resume time was ~370ms. Now it's down to 60 ms
(only VQ config and resume). The measurements were done on a ConnectX6DX
based vDPA device.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-21-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Resume a VQ if it is already created when the number of VQ pairs
increases. This is done in preparation for VQ pre-creation which is
coming in a later patch. It is necessary because calling setup_vq() on
an already created VQ will return early and will not enable the queue.
For symmetry, suspend a VQ instead of tearing it down when the number of
VQ pairs decreases. But only if the resume operation is supported.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-20-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are a few more places modifying the VQ to Ready directly. Let's
consolidate them into resume_vq().
The redundant warnings for resume_vq() errors can also be dropped.
There is one special case that needs to be handled for virtio-vdpa:
the initialized flag must be set to true earlier in setup_vq() so that
resume_vq() doesn't return early.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-18-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently rqt_size is initialized during device flag configuration.
That's because it is the earliest moment when device knows if MQ
(multi queue) is on or off.
Shift this configuration earlier to device creation time. This implies
that non-MQ devices will have a larger RQT size. But the configuration
will still be correct.
This is done in preparation for the pre-creation of hardware virtqueues
at device add time. When that change will be added, RQT will be created
at device creation time so it needs to be initialized to its max size.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-13-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtqueue size is a pre-requisite for setting up any virtqueue
resources. For the upcoming optimization of creating virtqueues at
device add, the virtqueue size has to be configured.
The queue size check in setup_vq() will always be false. So remove it.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-12-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The hardware VQ configuration is mirrored by data in struct
mlx5_vdpa_virtqueue . Instead of clearing just a few fields at reset,
fully clear the struct and initialize with the appropriate default
values.
As clear_vqs_ready() is used only during reset, get rid of it.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-8-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio spec says that a vdpa device should start off with one queue
pair. The driver is already compliant.
This patch moves the initialization to device add and reset times. This
is done in preparation for the pre-creation of hardware virtqueues at
device add time.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-7-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Currently, when the Virtio queue is full, a work item is scheduled
to execute in 1ms that retries adding the request to the queue.
This is a large amount of time on the scale on which a
virtio-fs device can operate. When using a DPU this is around
30-40us baseline without going to a remote server (4k, QD=1).
This patch changes the retrying behavior to immediately filling the
Virtio queue up again when a completion has been received.
This reduces the 99.9th percentile latencies in our tests by
60x and slightly increases the overall throughput, when using a
workload IO depth 2x the size of the Virtio queue and a
DPU-powered virtio-fs device (NVIDIA BlueField DPU).
Signed-off-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Yoray Zack <yorayz@nvidia.com>
Message-Id: <20240517190435.152096-3-pgootzen@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, when the enqueueing of a request or forget operation fails
with -ENOMEM, the enqueueing is retried after a timeout. This patch
removes this behavior and treats -ENOMEM in these scenarios like any
other error. By bubbling up the error to user space in the case of a
request, and by dropping the operation in case of a forget. This
behavior matches that of the FUSE layer above, and also simplifies the
error handling. The latter will come in handy for upcoming patches that
optimize the retrying of operations in case of -ENOSPC.
Signed-off-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Yoray Zack <yorayz@nvidia.com>
Message-Id: <20240517190435.152096-2-pgootzen@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/vdpa/vdpa.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/vdpa/ifcvf/ifcvf.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Message-Id: <20240611-md-drivers-vdpa-v1-1-efaf2de15152@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With ARCH=sh, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/virtio/virtio.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/virtio/virtio_ring.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Message-Id: <20240702-md-sh-drivers-virtio-v1-1-cf7325ab6ccc@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All callers of vhost_get_avail_idx() use smp_rmb() to
order the available ring entry read and avail_idx read.
Make vhost_get_avail_idx() call smp_rmb() itself whenever the avail_idx
is accessed. This way, the callers don't need to worry about the memory
barrier. As a side benefit, we also validate the index on all paths now,
which will hopefully help prevent/catch earlier future bugs.
Note that current code is inconsistent in how the errors are handled.
They are treated as an empty ring in some places, but as non-empty
ring in other places. This patch doesn't attempt to change the existing
behaviour.
No functional change intended.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Message-Id: <20240429232748.642356-1-gshan@redhat.com>
All the VM events related statistics have dependence on
'CONFIG_VM_EVENT_COUNTERS', separate these events into a function to
make code clean. Then we can remove 'CONFIG_VM_EVENT_COUNTERS' from
'update_balloon_stats'.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20240423034109.1552866-2-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
This commit introduces a new vDPA driver specifically designed for
managing the virtio control plane over the vDPA bus for OCTEON DPU
devices. The driver consists of two layers:
1. Octep HW Layer (Octeon Endpoint): Responsible for handling hardware
operations and configurations related to the DPU device.
2. Octep Main Layer: Compliant with the vDPA bus framework, this layer
implements device operations for the vDPA bus. It handles device
probing, bus attachment, vring operations, and other relevant tasks.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240614144659.1776067-1-schalla@marvell.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are two issues around seqpacket_allow:
1. seqpacket_allow is not initialized when socket is
created. Thus if features are never set, it will be
read uninitialized.
2. if VIRTIO_VSOCK_F_SEQPACKET is set and then cleared,
then seqpacket_allow will not be cleared appropriately
(existing apps I know about don't usually do this but
it's legal and there's no way to be sure no one relies
on this).
To fix:
- initialize seqpacket_allow after allocation
- set it unconditionally in set_features
Reported-by: syzbot+6c21aeb59d0e82eb2782@syzkaller.appspotmail.com
Reported-by: Jeongjun Park <aha310510@gmail.com>
Fixes: ced7b71371 ("vhost/vsock: support SEQPACKET for transport").
Tested-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240422100010-mutt-send-email-mst@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Pull kselftest fixes from Shuah Khan:
"One single patch to fix the non-contiguous CBM resctrl:
- AMD supports non-contiguous CBM but does not report it via CPUID.
This test should not use CPUID on AMD to detect non-contiguous CBM
support. Fix the problem so the test uses CPUID to discover
non-contiguous CBM support only on Intel"
* tag 'linux_kselftest-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/resctrl: Fix non-contiguous CBM for AMD
Pull vfs fixes from Christian Brauner:
"VFS:
- Improve handling of deep ancestor chains in is_subdir()
- Release locks cleanly when fctnl_setlk() races with close().
When setting a file lock fails the VFS tries to cleanup the already
created lock. The helper used for this calls back into the LSM
layer which may cause it to fail, leaving the stale lock accessible
via /proc/locks.
AFS:
- Fix a comma/semicolon typo"
* tag 'vfs-6.10-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Convert comma to semicolon
fs: better handle deep ancestor chains in is_subdir()
filelock: Remove locks reliably when fcntl/close race is detected
Jan reported that 'cd ..' may take a long time in deep directory
hierarchies under a bind-mount. If concurrent renames happen it is
possible to livelock in is_subdir() because it will keep retrying.
Change is_subdir() from simply retrying over and over to retry once and
then acquire the rename lock to handle deep ancestor chains better. The
list of alternatives to this approach were less then pleasant. Change
the scope of rcu lock to cover the whole walk while at it.
A big thanks to Jan and Linus. Both Jan and Linus had proposed
effectively the same thing just that one version ended up being slightly
more elegant.
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull erofs fixes from Gao Xiang:
"The most important one fixes possible infinite loops reported by a
smartphone vendor OPPO recently due to some unexpected zero-sized
compressed pcluster out of interrupted I/Os, storage failures, etc.
Another patch fixes global buffer memory leak on unloading, and the
remaining one switches to use super_set_uuid() to keep with the other
filesystems.
Summary:
- Fix possible global buffer memory leak when unloading EROFS module
- Fix FS_IOC_GETFSUUID ioctl by using super_set_uuid()
- Reset m_llen to 0 so then it can retry if metadata is invalid"
* tag 'erofs-for-6.10-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: ensure m_llen is reset to 0 if metadata is invalid
erofs: convert to use super_set_uuid to support for FS_IOC_GETFSUUID
erofs: fix possible memory leak in z_erofs_gbuf_exit()
When fcntl_setlk() races with close(), it removes the created lock with
do_lock_file_wait().
However, LSMs can allow the first do_lock_file_wait() that created the lock
while denying the second do_lock_file_wait() that tries to remove the lock.
In theory (but AFAIK not in practice), posix_lock_file() could also fail to
remove a lock due to GFP_KERNEL allocation failure (when splitting a range
in the middle).
After the bug has been triggered, use-after-free reads will occur in
lock_get_status() when userspace reads /proc/locks. This can likely be used
to read arbitrary kernel memory, but can't corrupt kernel memory.
This only affects systems with SELinux / Smack / AppArmor / BPF-LSM in
enforcing mode and only works from some security contexts.
Fix it by calling locks_remove_posix() instead, which is designed to
reliably get rid of POSIX locks associated with the given file and
files_struct and is also used by filp_flush().
Fixes: c293621bbf ("[PATCH] stale POSIX lock handling")
Cc: stable@kernel.org
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2563
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240702-fs-lock-recover-2-v1-1-edd456f63789@google.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull SCSI fixes from James Bottomley:
"A couple of error leg problems, one affecting scsi_debug and the other
affecting pure SAS (i.e. not SATA) SCSI expanders"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed
scsi: scsi_debug: Fix create target debugfs failure
Pull cxl fixes from Dave Jiang:
- Fix no cxl_nvd during pmem region auto-assemble
- Avoid NULLL pointer dereference in region lookup
- Add missing checks to interleave capability
- Add cxl kdoc fix to address document compilation error
* tag 'cxl-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: documentation: add missing files to cxl driver-api
cxl/region: check interleave capability
cxl/region: Avoid null pointer dereference in region lookup
cxl/mem: Fix no cxl_nvd during pmem region auto-assembling
