Permit programs such as "hwtstamp_ctl -i eth0" to retrieve the current
timestamping configuration of the NIC, rather than returning "Device
driver does not have support for non-destructive SIOCGHWTSTAMP."
The driver configures all channels with the same timestamping settings.
On TX, retrieve the settings of the first channel, those should be
representative for the entire NIC. On RX, save the filter settings in a
new adapter field.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250514151931.1988047-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TCA_FLOWER_KEY_CFM enum has a UNSPEC and MAX with _OPT
in the name, but the real attributes don't. Add a MAX that
more reasonably matches the attrs.
The PAD in TCA_TAPRIO is the only attr which doesn't have
_ATTR in it, perhaps signifying that it's not a real attr?
If so interesting idea in abstract but it makes codegen painful.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250513221752.843102-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
tcp: receive side improvements
We have set tcp_rmem[2] to 15 MB for about 8 years at Google,
but had some issues for high speed flows on very small RTT.
TCP rx autotuning has a tendency to overestimate the RTT,
thus tp->rcvq_space.space and sk->sk_rcvbuf.
This makes TCP receive queues much bigger than necessary,
to a point cpu caches are evicted before application can
copy the data, on cpus using DDIO.
This series aims to fix this.
- First patch adds tcp_rcvbuf_grow() tracepoint, which was very
convenient to study the various issues fixed in this series.
- Seven patches fix receiver autotune issues.
- Two patches fix sender side issues.
- Final patch increases tcp_rmem[2] so that TCP speed over WAN
can meet modern needs.
Tested on a 200Gbit NIC, average max throughput of a single flow:
Before:
73593 Mbit.
After:
122514 Mbit.
====================
Link: https://patch.msgid.link/20250513193919.1089692-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This partially reverts commit c73e5807e4 ("tcp: tsq: no longer use
limit_output_bytes for paced flows")
Overriding the tcp_limit_output_bytes sysctl value
for FQ enabled flows has the following problem:
It allows TCP to queue around 2 ms worth of data per flow,
defeating tcp_rcv_rtt_update() accuracy on the receiver,
forcing it to increase sk->sk_rcvbuf even if the real
RTT is around 100 us.
After this change, we keep enough packets in flight to fill
the pipe, and let receive queues small enough to get
good cache behavior (cpu caches and/or NIC driver page pools).
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250513193919.1089692-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_rcv_rtt_update() role is to keep an estimation
of RTT (tp->rcv_rtt_est.rtt_us) for receivers.
If an application is too slow to drain the TCP receive
queue, it is better to leave the RTT estimation small,
so that tcp_rcv_space_adjust() does not inflate
tp->rcvq_space.space and sk->sk_rcvbuf.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250513193919.1089692-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_rcv_rtt_update() goal is to maintain an estimation of the RTT
in tp->rcv_rtt_est.rtt_us, used by tcp_rcv_space_adjust()
When TCP TS are enabled, tcp_rcv_rtt_update() is using
EWMA to smooth the samples.
Change this to immediately latch the incoming value if it
is lower than tp->rcv_rtt_est.rtt_us, so that tcp_rcv_space_adjust()
does not overshoot tp->rcvq_space.space and sk->sk_rcvbuf.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250513193919.1089692-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the application can not drain fast enough a TCP socket queue,
tcp_rcv_space_adjust() can overestimate tp->rcvq_space.space.
Then sk->sk_rcvbuf can grow and hit tcp_rmem[2] for no good reason.
Fix this by taking into acount the number of available bytes.
Keeping sk->sk_rcvbuf at the right size allows better cache efficiency.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Link: https://patch.msgid.link/20250513193919.1089692-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch takes care of the needed provisioning
when incoming packets are stored in the out of order queue.
This part was not implemented in the correct way, we need
to decouple it from tcp_rcv_space_adjust() logic.
Without it, stalls in the pipe could happen.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250513193919.1089692-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current autosizing in tcp_rcv_space_adjust() is too aggressive.
Instead of betting on possible losses and over estimate BDP,
it is better to only account for slow start.
The following patch is then adding a more precise tuning
in the events of packet losses.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250513193919.1089692-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth and wireless.
A few more fixes for the locking changes trickling in. Nothing too
alarming, I suspect those will continue for another release. Other
than that things are slowing down nicely.
Current release - fix to a fix:
- Bluetooth: hci_event: use key encryption size when its known
- tools: ynl-gen: allow multi-attr without nested-attributes again
Current release - regressions:
- locking fixes:
- lock lower level devices when updating features
- eth: bnxt_en: bring back rtnl_lock() in the bnxt_open() path
- devmem: fix panic when Netlink socket closes after module unload
Current release - new code bugs:
- eth: txgbe: fixes for FW communication on new AML devices
Previous releases - always broken:
- sched: flush gso_skb list too during ->change(), avoid potential
null-deref on reconfig
- wifi: mt76: disable NAPI on driver removal
- hv_netvsc: fix error 'nvsp_rndis_pkt_complete error status: 2'"
* tag 'net-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
net: devmem: fix kernel panic when netlink socket close after module unload
tsnep: fix timestamping with a stacked DSA driver
net/tls: fix kernel panic when alloc_page failed
bnxt_en: bring back rtnl_lock() in the bnxt_open() path
mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
octeontx2-pf: Do not reallocate all ntuple filters
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
hv_netvsc: Remove rmsg_pgcnt
hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
octeontx2-af: Fix CGX Receive counters
net: ethernet: mtk_eth_soc: fix typo for declaration MT7988 ESW capability
net: libwx: Fix FW mailbox unknown command
net: libwx: Fix FW mailbox reply timeout
net: txgbe: Fix to calculate EEPROM checksum for AML devices
octeontx2-pf: macsec: Fix incorrect max transmit size in TX secy
...
Kernel panic occurs when a devmem TCP socket is closed after NIC module
is unloaded.
This is Devmem TCP unregistration scenarios. number is an order.
(a)netlink socket close (b)pp destroy (c)uninstall result
1 2 3 OK
1 3 2 (d)Impossible
2 1 3 OK
3 1 2 (e)Kernel panic
2 3 1 (d)Impossible
3 2 1 (d)Impossible
(a) netdev_nl_sock_priv_destroy() is called when devmem TCP socket is
closed.
(b) page_pool_destroy() is called when the interface is down.
(c) mp_ops->uninstall() is called when an interface is unregistered.
(d) There is no scenario in mp_ops->uninstall() is called before
page_pool_destroy().
Because unregister_netdevice_many_notify() closes interfaces first
and then calls mp_ops->uninstall().
(e) netdev_nl_sock_priv_destroy() accesses struct net_device to acquire
netdev_lock().
But if the interface module has already been removed, net_device
pointer is invalid, so it causes kernel panic.
In summary, there are only 3 possible scenarios.
A. sk close -> pp destroy -> uninstall.
B. pp destroy -> sk close -> uninstall.
C. pp destroy -> uninstall -> sk close.
Case C is a kernel panic scenario.
In order to fix this problem, It makes mp_dmabuf_devmem_uninstall() set
binding->dev to NULL.
It indicates an bound net_device was unregistered.
It makes netdev_nl_sock_priv_destroy() do not acquire netdev_lock()
if binding->dev is NULL.
A new binding->lock is added to protect a dev of a binding.
So, lock ordering is like below.
priv->lock
netdev_lock(dev)
binding->lock
Tests:
Scenario A:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
kill $pid
ip link set $interface down
modprobe -rv $module
Scenario B:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
ip link set $interface down
kill $pid
modprobe -rv $module
Scenario C:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
modprobe -rv $module
sleep 5
kill $pid
Splat looks like:
Oops: general protection fault, probably for non-canonical address 0xdffffc001fffa9f7: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
KASAN: probably user-memory-access in range [0x00000000fffd4fb8-0x00000000fffd4fbf]
CPU: 0 UID: 0 PID: 2041 Comm: ncdevmem Tainted: G B W 6.15.0-rc1+ #2 PREEMPT(undef) 0947ec89efa0fd68838b78e36aa1617e97ff5d7f
Tainted: [B]=BAD_PAGE, [W]=WARN
RIP: 0010:__mutex_lock (./include/linux/sched.h:2244 kernel/locking/mutex.c:400 kernel/locking/mutex.c:443 kernel/locking/mutex.c:605 kernel/locking/mutex.c:746)
Code: ea 03 80 3c 02 00 0f 85 4f 13 00 00 49 8b 1e 48 83 e3 f8 74 6a 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 34 48 89 fa 48 c1 ea 03 <0f> b6 f
RSP: 0018:ffff88826f7ef730 EFLAGS: 00010203
RAX: dffffc0000000000 RBX: 00000000fffd4f88 RCX: ffffffffaa9bc811
RDX: 000000001fffa9f7 RSI: 0000000000000008 RDI: 00000000fffd4fbc
RBP: ffff88826f7ef8b0 R08: 0000000000000000 R09: ffffed103e6aa1a4
R10: 0000000000000007 R11: ffff88826f7ef442 R12: fffffbfff669f65e
R13: ffff88812a830040 R14: ffff8881f3550d20 R15: 00000000fffd4f88
FS: 0000000000000000(0000) GS:ffff888866c05000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000563bed0cb288 CR3: 00000001a7c98000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
...
netdev_nl_sock_priv_destroy (net/core/netdev-genl.c:953 (discriminator 3))
genl_release (net/netlink/genetlink.c:653 net/netlink/genetlink.c:694 net/netlink/genetlink.c:705)
...
netlink_release (net/netlink/af_netlink.c:737)
...
__sock_release (net/socket.c:647)
sock_close (net/socket.c:1393)
Fixes: 1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250514154028.1062909-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver is susceptible to a form of the bug explained in commit
c26a2c2ddc ("gianfar: Fix TX timestamping with a stacked DSA driver")
and in Documentation/networking/timestamping.rst section "Other caveats
for MAC drivers", specifically it timestamps any skb which has
SKBTX_HW_TSTAMP, and does not consider if timestamping has been enabled
in adapter->hwtstamp_config.tx_type.
Evaluate the proper TX timestamping condition only once on the TX
path (in tsnep_xmit_frame_ring()) and store the result in an additional
TX entry flag. Evaluate the new TX entry flag in the TX confirmation path
(in tsnep_tx_poll()).
This way SKBTX_IN_PROGRESS is set by the driver as required, but never
evaluated. SKBTX_IN_PROGRESS shall not be evaluated as it can be set
by a stacked DSA driver and evaluating it would lead to unwanted
timestamps.
Fixes: 403f69bbdb ("tsnep: Add TSN endpoint Ethernet MAC driver")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250514195657.25874-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We cannot set frag_list to NULL pointer when alloc_page failed.
It will be used in tls_strp_check_queue_ok when the next time
tls_strp_read_sock is called.
This is because we don't reset full_len in tls_strp_flush_anchor_copy()
so the recv path will try to continue handling the partial record
on the next call but we dettached the rcvq from the frag list.
Alternative fix would be to reset full_len.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000028
Call trace:
tls_strp_check_rcv+0x128/0x27c
tls_strp_data_ready+0x34/0x44
tls_data_ready+0x3c/0x1f0
tcp_data_ready+0x9c/0xe4
tcp_data_queue+0xf6c/0x12d0
tcp_rcv_established+0x52c/0x798
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Signed-off-by: Pengtao He <hept.hept.hept@gmail.com>
Link: https://patch.msgid.link/20250514132013.17274-1-hept.hept.hept@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Couple of stragglers:
- mac80211: fix syzbot/ubsan in scan counted-by
- mt76: fix NAPI handling on driver remove
- mt67: fix multicast/ipv6 receive
* tag 'wireless-2025-05-15' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
====================
Link: https://patch.msgid.link/20250515121749.61912-4-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Error recovery, PCIe AER, resume, and TX timeout will invoke bnxt_open()
with netdev_lock only. This will cause RTNL assert failure in
netif_set_real_num_tx_queues(), netif_set_real_num_tx_queues(),
and netif_set_real_num_tx_queues().
Example error recovery assert:
RTNL: assertion failed at net/core/dev.c (3178)
WARNING: CPU: 3 PID: 3392 at net/core/dev.c:3178 netif_set_real_num_tx_queues+0x1fd/0x210
Call Trace:
<TASK>
? __pfx_bnxt_msix+0x10/0x10 [bnxt_en]
__bnxt_open_nic+0x1ef/0xb20 [bnxt_en]
bnxt_open+0xda/0x130 [bnxt_en]
bnxt_fw_reset_task+0x21f/0x780 [bnxt_en]
process_scheduled_works+0x9d/0x400
For now, bring back rtnl_lock() in all these code paths that can invoke
bnxt_open(). In the bnxt_queue_start() error path, we don't have
rtnl_lock held so we just change it to call netif_close() instead of
bnxt_reset_task() for simplicity. This error path is unlikely so it
should be fine.
Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250514062908.2766677-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver only offloads neighbors that are constructed on top of net
devices registered by it or their uppers (which are all Ethernet). The
device supports GRE encapsulation and decapsulation of forwarded
traffic, but the driver will not offload dummy neighbors constructed on
top of GRE net devices as they are not uppers of its net devices:
# ip link add name gre1 up type gre tos inherit local 192.0.2.1 remote 198.51.100.1
# ip neigh add 0.0.0.0 lladdr 0.0.0.0 nud noarp dev gre1
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 NOARP
(Note that the neighbor is not marked with 'offload')
When the driver is reloaded and the existing configuration is replayed,
the driver does not perform the same check regarding existing neighbors
and offloads the previously added one:
# devlink dev reload pci/0000:01:00.0
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 offload NOARP
If the neighbor is later deleted, the driver will ignore the
notification (given the GRE net device is not its upper) and will
therefore keep referencing freed memory, resulting in a use-after-free
[1] when the net device is deleted:
# ip neigh del 0.0.0.0 lladdr 0.0.0.0 dev gre1
# ip link del dev gre1
Fix by skipping neighbor replay if the net device for which the replay
is performed is not our upper.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x1ea/0x200
Read of size 8 at addr ffff888155b0e420 by task ip/2282
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
mlxsw_sp_neigh_entry_update+0x1ea/0x200
mlxsw_sp_router_rif_gone_sync+0x2a8/0x440
mlxsw_sp_rif_destroy+0x1e9/0x750
mlxsw_sp_netdevice_ipip_ol_event+0x3c9/0xdc0
mlxsw_sp_router_netdevice_event+0x3ac/0x15e0
notifier_call_chain+0xca/0x150
call_netdevice_notifiers_info+0x7f/0x100
unregister_netdevice_many_notify+0xc8c/0x1d90
rtnl_dellink+0x34e/0xa50
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x131/0x360
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x121/0x1b0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 8fdb09a767 ("mlxsw: spectrum_router: Replay neighbours when RIF is made")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/c53c02c904fde32dad484657be3b1477884e9ad6.1747225701.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sch_frag_data_storage is a per-CPU variable and relies on disabled BH
for its locking. Without per-CPU locking in local_bh_disable() on
PREEMPT_RT this data structure requires explicit locking.
Add local_lock_t to the struct and use local_lock_nested_bh() for locking.
This change adds only lockdep coverage and does not alter the functional
behaviour for !PREEMPT_RT.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-12-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ovs_pcpu_storage is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
The data structure can be referenced recursive and there is a recursion
counter to avoid too many recursions.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. Add an owner of the struct which is
the current task and acquire the lock only if the structure is not owned
by the current task.
Cc: Aaron Conole <aconole@redhat.com>
Cc: Eelco Chaudron <echaudro@redhat.com>
Cc: Ilya Maximets <i.maximets@ovn.org>
Cc: dev@openvswitch.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250512092736.229935-9-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nat_keepalive_sk_ipv[46] is a per-CPU variable and relies on disabled BH
for its locking. Without per-CPU locking in local_bh_disable() on
PREEMPT_RT this data structure requires explicit locking.
Use sock_bh_locked which has a sock pointer and a local_lock_t. Use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-7-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
system_page_pool is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Make a struct with a page_pool member (original system_page_pool) and a
local_lock_t and use local_lock_nested_bh() for locking. This change
adds only lockdep coverage and does not alter the functional behaviour
for !PREEMPT_RT.
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-6-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hmac_storage is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-5-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
dst_cache::cache is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-3-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Subbaraya Sundeep says:
====================
octeontx2: Improve mailbox tracing
Octeontx2 VF,PF and AF devices communicate using hardware
shared mailbox region where VFs can only to talk to its PFs
and PFs can only talk to AF. AF does the entire resource management
for all PFs and VFs. The shared mbox region is used for synchronous
requests (requests from PF to AF or VF to PF) and async notifications
(notifications from AF to PFs or PF to VFs). Sending a request to AF
from VF involves various stages like
1. VF allocates message in shared region
2. Triggers interrupt to PF
3. PF upon receiving interrupt from VF will copy the message
from VF<->PF region to PF<->AF region
4. Triggers interrupt to AF
5. AF processes it and writes response in PF<->AF region
6. Triggers interrupt to PF
7. PF copies responses from PF<->AF region to VF<->PF region
8. Triggers interrupt to Vf
9. VF reads response in VF<->PF region
Due to various stages involved, Tracepoints are used in mailbox code for
debugging. Existing tracepoints need some improvements so that maximum
information can be inferred from trace logs during an issue.
This patchset tries to enhance existing tracepoints and also adds
a couple of tracepoints.
====================
Link: https://patch.msgid.link/1747136408-30685-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Apart from netdev interface Octeontx2 PF does the following:
1. Sends its own requests to AF and receives responses from AF.
2. Receives async messages from AF.
3. Forwards VF requests to AF, sends respective responses from AF to VFs.
4. Sends async messages to VFs.
This patch adds new tracepoint otx2_msg_status to display the status
of PF wrt mailbox handling.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1747136408-30685-5-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds pcifunc which represents PF and VF device to the
tracepoints otx2_msg_alloc, otx2_msg_send, otx2_msg_process so that
it is easier to correlate which device allocated the message, which
device forwarded it and which device processed that message.
Also add message id in otx2_msg_send tracepoint to check which
message is sent at any point of time from a device.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1747136408-30685-4-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update the for_each_netdev_in_bond_rcu macro to iterate through network
devices in the bond's network namespace instead of always using
init_net. This change is safe because:
1. **Bond-Slave Namespace Relationship**: A bond device and its slaves
must reside in the same network namespace. The bond device's
namespace is established at creation time and cannot change.
2. **Slave Movement Implications**: Any attempt to move a slave device
to a different namespace automatically removes it from the bond, as
per kernel networking stack rules.
This maintains the invariant that slaves must exist in the same
namespace as their bond.
This change is part of an effort to enable Link Aggregation (LAG) to
work properly inside custom network namespaces. Previously, the macro
would only find slave devices in the initial network namespace,
preventing proper bonding functionality in custom namespaces.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250513081922.525716-1-mbloch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
