amdgpu_dm_crtc_set_static_screen_optimze() maps sso_enable to the
Replay and PSR1 vsync events. allow_sr_entry is an entry gate, but the
helper currently applies it to both directions.
A non-fast update clears allow_sr_entry. During a modeset, a separate
hardware-programming event keeps self-refresh blocked while the stream
is reprogrammed. If vblank is enabled before the entry delay expires,
the ISM calls the helper with sso_enable false. The early return drops
the disable request, so the vsync events are not set.
After enough fast commits, allow_sr_entry becomes true and the
hardware-programming event can be cleared. Since the vblank reference
remains held, there is no further zero-to-one vblank transition to
restore the missing vsync events. Replay or PSR1 can then become active
while vblank is still enabled.
Gate only requests that enable static-screen optimization. Always
process disable requests so a vblank requestor keeps Replay and PSR1
blocked.
On a Phoenix system, repeated SDDM-to-VT handoffs produced stuck flips
followed by flip_done and commit-wait timeouts. The timeout was not
observed with this change applied.
Fixes: 3c108046e1 ("drm/amd/display: Add power module on Linux")
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: Claude:opus-5
Signed-off-by: David Weber <weber.aulendorf@gmail.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd0c009821)
Cc: stable@vger.kernel.org
amdgpu_pci_remove() calls drm_dev_unplug() before invoking the fini
routines. After drm_dev_unplug() the drm_dev_enter() guard in
amdgpu_ttm_fini() always returns false, so iounmap() for
aper_base_kaddr is silently skipped. On connected_to_cpu hardware
ioremap_cache() maps the aperture as WB; when iounmap() is skipped the
stale WB PAT entry persists. On reload IP discovery's
memremap(MEMREMAP_WC) on the same aperture range hits a WB/WC conflict,
producing an ioremap error and failing re-probe.
Remove the drm_dev_enter() guard and call iounmap() unconditionally.
The aperture mapping is plain MMIO and does not require device-presence
protection. Surprise-removal cleanup of aper_base_kaddr is already
handled unconditionally by amdgpu_device_unmap_mmio().
Fixes: 62d5f9f711 ("drm/amdgpu: Unmap MMIO mappings when device is not unplugged")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fb3f68af9f)
Cc: stable@vger.kernel.org
Some older DCE timing generators do not implement is_tg_enabled in
their ops table. Calling it unconditionally when waiting for AV mute
frames causes a NULL pointer dereference on Southern Islands dGPUs
when turning the display off over HDMI.
Check that tg and the required ops exist before waiting for frames.
Fixes: 414da24137 ("drm/amd/display: Add AV mute wait frames to dce110_set_avmute")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5557
Tested-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2686a0c0aa)
Cc: stable@vger.kernel.org
devres teardown is LIFO. The aperture devres node was registered after
the DRM device node, so devres_release_all() unmaps the aperture before
the DRM device release callback fires amdgpu_device_fini_sw(). IP
sw_fini callbacks (e.g. vcn_v4_0_sw_fini) write to fw_shared through a
pointer derived from aper_base_kaddr, causing a kernel page fault on
probe failure / rollback:
BUG: unable to handle page fault ... PMD 0
RIP: vcn_v4_0_sw_fini+0x7b/0x170 [amdgpu]
Call Trace:
amdgpu_device_fini_sw
amdgpu_driver_release_kms
devm_drm_dev_init_release
devres_release_all
This reverts commit d871e99879.
Fixes: d871e99879 ("drm/amdgpu: fix aperture mapping leak")
Reported-by: Yuansheng Mao <yuansheng.mao@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 336e0cd576)
Cc: stable@vger.kernel.org
Commit 527ba26e50 ("drm/radeon: delete radeon_fence_process in
is_signaled, no deadlock") removed the hardware polling from
radeon_fence_is_signaled() to fix a self-deadlock caused by
wake_up_all(&rdev->fence_queue) being called with the fence queue
lock held.
However, removing the polling entirely causes significant performance
regression (e.g. glxgears FPS drop) because the fence signaled check
becomes purely passive — it only reads the cached last_seq without
probing the GPU, so completed GPU work is not detected in time,
causing unnecessary CPU stalls in sync-heavy workloads.
Fix this by calling radeon_fence_activity() directly instead of
radeon_fence_process(). radeon_fence_activity() reads the hardware
fence counter and updates last_seq via atomic ops without calling
wake_up_all(), thus avoiding the deadlock while restoring timely
fence detection.
Fixes: 527ba26e50 ("drm/radeon: delete radeon_fence_process in is_signaled, no deadlock")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Wang Jiang <jiangwang@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f59ad4cca2)
Cc: stable@vger.kernel.org
The VBIOS for Cyan Skillfish devices (DCN201) indicates there is
DisplayPort ref clock spread spectrum downspread, so the audio clock
is corrected for it.
However, the clock source in this hardware does not seem to actually be
running with a clock downspread, so DisplayPort audio desyncs with video
after several minutes.
Ignore dprefclk SS downspread on CYAN_SKILLFISH2 asic.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5429
Signed-off-by: Travis K. Bangs <tbangs89@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f3a2d86587)
Cc: stable@vger.kernel.org
Allocate each ring buffer separately. A single allocation summing all
ring sizes can exceed the page allocator's MAX_ORDER limit and fail;
per-ring buffers stay small enough to satisfy. The existing allocation
style doesn't capture any ring data if the huge allocation fails.
Splitting into multiple allocations helps to capture as much data as
possible for the core dump.
A failed ring is left with a NULL buffer and skipped when formatting.
Fixes: eea85914d1 ("drm/amdgpu: save ring content before resetting the device")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Assisted-by: Claude Code
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e8e92b789)
Cc: stable@vger.kernel.org
The number of rings with outstanding fences can be large, requiring a
bigger allocation. Such allocations don't need to be physically
contiguous, so use kvzalloc/kvcalloc which fall back to vmalloc when
contiguous memory isn't available. This also matches the existing
kvfree used to free these allocations.
Also guard the allocation with ring_count to avoid passing 0 size to
allocation routines.
Fixes: eea85914d1 ("drm/amdgpu: save ring content before resetting the device")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 74d48bd6b7)
Cc: stable@vger.kernel.org
On GFX rings, amdgpu_cs_p2_ib() passed user-supplied ib_bytes through
to ib->length_dw without a limit, while ring_emit_ib() encodes length
into packet fields. Oversized values can corrupt adjacent control bits
and destabilize command submission.
Add a per-ring IB packet size limit helper and reject command
submissions exceeding the corresponding dword limit before IB
allocation. Use the documented 20-bit limit for GFX/compute/SDMA/VPE,
and apply the MM fallback limit for other ring types.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7f48fa2cf6)
Cc: stable@vger.kernel.org
Creating a user queue can race with a GPU reset. While recovery holds
reset_domain->sem for write, MES is unresponsive, so the ADD_QUEUE from
amdgpu_userq_map_helper() times out (-110) and an otherwise valid queue
create fails:
amdgpu: MES(0) failed to respond to msg=ADD_QUEUE
[drm:mes_userq_map [amdgpu]] *ERROR* Failed to map queue in HW, err (-110)
amdgpu: [drm] *ERROR* ... Failed to map Queue
amdgpu: [drm] *ERROR* ... Failed to create usermode queue
Take reset_domain->sem for read around the map so it runs only once MES
is back up. This mirrors amdgpu_userq_cleanup() and honors the
userq_mutex -> reset_domain->sem order; the reset path never takes
userq_mutex, so there is no deadlock.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a8e151fe62)
Cc: stable@vger.kernel.org
Move fs_reclaim_acquire() to before all lock acquisitions to eliminate
false positive circular locking dependency warning.
This is a 7.2-cycle regression fix suitable for stable backport.
v3: Address Mikhail Gavrilov technical review:
- Clarify that fs_reclaim_acquire/release pair only REGISTERS the
fs_reclaim lock class, does NOT create a static edge when called
with no locks held
- Explain that the actual fs_reclaim -> notifier_lock edge is
established at runtime during memory reclaim -> MMU notifier path
- Add Cc: Arunpravin PaneerSelvam
v2: Address Mikhail Gavrilov review feedback:
- Fix author name: Michael -> Mikhail Gavrilov in all trailers
- Add Fixes: tag to link regression to original commit
- Add Tested-by: Mikhail Gavrilov (tested on RX 7900 XTX)
Fixes: 1d0f5838b1 ("drm/amdgpu: Add lockdep annotations for lock ordering validation")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Analyzed-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Test-case-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Arunpravin PaneerSelvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Acked-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 70a1e9849e)
Cc: stable@vger.kernel.org
TA_CNTL2.TRUNCATE_COORD_MODE selects whether texture coordinate
truncation is D3D9/GL/Vulkan conformant. gfx11 reads it and reports it to
userspace via AMDGPU_IDS_FLAGS_CONFORMANT_TRUNC_COORD, but gfx12 never
read it, so the flag was always reported as 0 and userspace fell back to
the non-conformant path.
Read it in gfx_v12_0_constants_init() like gfx11 does.
Fixes: 52cb80c12e ("drm/amdgpu: Add gfx v12_0 ip block support (v6)")
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4261cbc7b0)
Cc: stable@vger.kernel.org
Like jpeg_v5_0_0, in DPG mode the ring reset path only clears the
JPEG_PG_MODE bit and never resets a hung JRBC, so the post-reset ring test
times out and the driver falls back to a full MODE1 reset.
Temporarily force the static power-gating path during the reset so the
stop/start sequence power-cycles the JPEG block (JMI soft reset + power
off/on), matching the jpeg_v4_0 reset.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e93659cab1)
Cc: stable@vger.kernel.org
Like jpeg_v5_0_0, in DPG mode the ring reset path only clears the
JPEG_PG_MODE bit and never resets a hung JRBC, so the post-reset ring test
times out and the driver falls back to a full MODE1 reset.
Temporarily force the static power-gating path during the reset so the
stop/start sequence power-cycles the JPEG block (JMI soft reset + power
off/on), matching the jpeg_v4_0 reset.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 75a308eef4)
Cc: stable@vger.kernel.org
In DPG mode jpeg_v5_0_0_ring_reset() takes the DPG stop path, which only
clears the JPEG_PG_MODE bit and never resets the JRBC. A hung ring is not
recovered: the post-reset ring test times out and the driver falls back to
a full MODE1 reset.
Temporarily force the static power-gating path during the reset so the
stop/start sequence power-cycles the JPEG block (JMI soft reset + power
off/on), matching the jpeg_v4_0 reset which has no DPG path.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 79b3612827)
Cc: stable@vger.kernel.org
V3D exposes several independent hardware queues (BIN, RENDER, TFU and
CSD) but has only a single, global reset. A timeout on any one queue
therefore has to stop, reset and restart the schedulers of every other
queue as well. That makes concurrent timeout handlers unsafe.
`reset_lock` was never able to make them safe, as a driver-side lock can
only cover the driver's &drm_sched_backend_ops.timedout_job callback.
The scheduler handles the timed out job and its pending list around that
callback, outside of the driver's control, so a global reset triggered
by one queue can still interfere with another queue that is in the
middle of handling a timeout of its own.
Consequently, if a reset happens in the CSD queue while a CL-intensive
application is running, the global reset stops and restarts the CL
queue's scheduler while that queue is handling a timeout of its own. As
drm_sched_stop() and drm_sched_start() subtract and add the credits of
every job sitting on the pending list of the scheduler they are called
on, and as the CL queue's handler concurrently takes its job off that
same list and puts it back, the stop and the start no longer see the
same set of jobs. The CL queue is left with more credits in flight than
its limit:
[ 327.302739] ------------[ cut here ]------------
[ 327.302744] WARNING: CPU: 2 PID: 43 at drivers/gpu/drm/scheduler/sched_main.c:102 drm_sched_run_job_work+0x238/0x4d0 [gpu_sched]
[ 327.302884] CPU: 2 UID: 0 PID: 43 Comm: kworker/u16:1 Not tainted 6.18.39-v8-16k+ #3 PREEMPT
[ 327.302889] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 327.302893] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched]
[ 327.302984] Call trace:
[ 327.302987] drm_sched_run_job_work+0x238/0x4d0 [gpu_sched] (P)
[ 327.302997] process_scheduled_works+0x180/0x3d0
[ 327.303010] worker_thread+0x268/0x3e8
[ 327.303016] kthread+0x140/0x250
[ 327.303022] ret_from_fork+0x10/0x20
[ 327.303031] ---[ end trace 0000000000000000 ]---
From that point on, the credit count of the CL queue is broken, causing
a complete GPU hang and UI freeze.
The DRM scheduler already provides a mechanism to serialize the timeout
handlers of different schedulers: an ordered workqueue passed as
drm_sched_init()'s @timeout_wq parameter. By default, each scheduler
queues its timeout work on the system workqueue, which runs the handlers
concurrently. Give all of the queues a shared ordered workqueue instead,
as recommended by the DRM scheduler documentation for hardware that has
distinct queues but resets globally.
Cc: stable@vger.kernel.org # 6.15
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260728-v3d-order-global-reset-v1-1-e47be838158d@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
ps8640_aux_transfer_msg() programs the AUX address registers, starts the
AUX transfer, waits for SWAUX_SEND to clear, and reads the AUX status
register. Several of those regmap operations have return values, but the
function only checks a stale ret after the status read.
Propagate failures from the address write, transfer start, completion
poll, and status read. This avoids returning a transfer length when the
bridge register transaction or AUX completion wait failed.
Fixes: 13afcdd727 ("drm/bridge: parade-ps8640: Add support for AUX channel")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260723103509.2-ps8640-v2-pengpeng@iscas.ac.cn
HDMI 2.0 section 6.1.3.1 specifies that after enabling
Scrambling_Enable and starting scrambled video transmission, the source
should poll Scrambling_Status until it reads 1 or until a timeout of
200 ms expires.
Add a polling step after enabling the HDMI port to check the scrambling
status when HDMI scrambling is enabled.
On some HDMI 2.0 sinks, omitting this check can result in 4K@60Hz
(594 MHz) failing to come up correctly because the sink has not yet
finished its scrambling setup. In practice, waiting for the scrambling
status here fixes such sinks.
While this synchronous polling is not itself explicitly required for
correct modeset sequencing, HDMI 2.0 section 6.1.3.1 does recommend it
as the way for the source to verify that the TMDS link is functioning
correctly with scrambling enabled.
v3:
- Add explicit HDMI 2.0 section reference in code comment
- Clarify commit message around the observed sink fix
v2:
- Poll TMDS_Scrambler_Status for up to 200 ms instead of using a fixed
delay
Reported-by: Jerome Tollet <jtollet@cisco.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6868
Link: https://lore.kernel.org/dri-devel/20251230091037.5603-1-jerome.tollet@gmail.com/
Signed-off-by: Jerome Tollet <jerome.tollet@gmail.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20260520022544.3097252-1-ankit.k.nautiyal@intel.com
(cherry picked from commit b7d51d65e4)
Fixes: 1595363788 ("drm/i915: enable scrambling")
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
panthor_fw_load_section_entry() skips BO creation when the firmware section
VA range is empty. If such a section is added to the firmware section list,
section->mem is left as NULL.
Later reload and unplug paths iterate over all firmware sections and
dereference section->mem, which can lead to a NULL pointer dereference.
Zero-sized firmware sections are valid, so accept them as no-op entries but
skip adding them to the section list.
Fixes: 2718d91816 ("drm/panthor: Add the FW logical block")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20260724172621.63046-1-osama.abdelkader@gmail.com
Signed-off-by: Steven Price <steven.price@arm.com>
[Why]
We need to exit PSR/IPS before programming. Before calling DC for
programming in amdgpu_dm_commit_planes(), there's a
vblank_control_workqueue flush. This waits for IPS and PSR exit. (See
drm_vblank_on/off() > amdgpu_dm_crtc_set_vblank() --queue_work()->
amdgpu_dm_crtc_vblank_control_worker())
Prior to the tagged "Fixes:" change, drm_vblank_get() was called before
the workqueue flush. This ordering ensures that PSR exit occurred before
programming. After the "Fixes:" change, drm_vblank_get() is called after
the workqueue flush, leading to programming while idle optimizations are
still active. This can lead to incorrect flip_pending detection used by
vblank event delivery.
[How]
Split the vblank_get() component of `dm_arm_vblank_event()` into
`dm_arm_vblank_event_pre_programming()`, which is called before
programming. Call it before the vblank_control_workqueue flush.
Includes a drive-by cleanup of prepare_flip_isr(): the only caller is
dm_arm_vblank_event() and it's simple enough to roll-in.
v2: Fix checkpatch formatting warning on
drm_arm_vblank_event_pre_programming() arg alignment.
Fixes: 48ab86360a ("drm/amd/display: check GRPH_FLIP status before sending event")
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/4141#note_3583205
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5527
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: Claude:opus-5
Suggested-by: David Weber <weber.aulendorf@gmail.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05984e2952)
APUs use firmware-owned DPM tables and do not support replacement through
pp_table. Generic callbacks can nevertheless expose the sysfs file and
accept an upload before resetting the power management stack.
Treat pp_table as unsupported on APUs. Use the same platform check in the
get and set paths to hide the file and reject uploads.
Fixes: 289921b03f ("drm/amd/powerplay: implement sysfs of pp_table for smu11 (v2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 74f28db2db)
Cc: stable@vger.kernel.org
iface_fw_to_cpu_addr() only checks that the firmware-provided MCU virtual
address points inside the shared section. The returned pointer is later
used as a full firmware interface structure, so accepting an address near
the end of the shared section can still lead to out-of-bounds accesses.
Pass the expected object size to iface_fw_to_cpu_addr() and reject ranges
that do not fit entirely in the shared section.
Fixes: 2718d91816 ("drm/panthor: Add the FW logical block")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20260720114918.15973-1-osama.abdelkader@gmail.com
On a non-range clear, curs.size is never set, so the segment test
(next - va_curs_start > curs->size) returns false for every level > 0
before the clear_pt short-circuit is reached. The clear then descends to
level 0 instead of forming a huge zero-leaf, wasting page tables and
risking -ENOMEM on unbind.
Move the null-VMA, purged-BO and clear_pt short-circuits above the
curs->size test. The bind path always sets curs.size, so it is unaffected.
v2
- Also set curs.size on the clear path so the cursor stays meaningful
during the walk. clear_pt is only reached with range == NULL, so assert
that invariant. (Matthew Brost)
Cc: Matthew Brost <matthew.brost@intel.com>
Fixes: 5b658b7e89 ("drm/xe: Clear scratch page on vm_bind")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260728055916.593707-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
(cherry picked from commit 04eeeb45cb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
