Pull memblock updates from Mike Rapoport:
- new memblock_estimated_nr_free_pages() helper to replace
totalram_pages() which is less accurate when
CONFIG_DEFERRED_STRUCT_PAGE_INIT is set
- fixes for memblock tests
* tag 'memblock-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
s390/mm: get estimated free pages by memblock api
kernel/fork.c: get estimated free pages by memblock api
mm/memblock: introduce a new helper memblock_estimated_nr_free_pages()
memblock test: fix implicit declaration of function 'strscpy'
memblock test: fix implicit declaration of function 'isspace'
memblock test: fix implicit declaration of function 'memparse'
memblock test: add the definition of __setup()
memblock test: fix implicit declaration of function 'virt_to_phys'
tools/testing: abstract two init.h into common include directory
memblock tests: include export.h in linkage.h as kernel dose
memblock tests: include memory_hotplug.h in mmzone.h as kernel dose
Pull sparc32 update from Andreas Larsson:
- Remove an unused variable for sparc32
* tag 'sparc-for-6.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
arch/sparc: remove unused varible paddrbase in function leon_swprobe()
Pull powerpc fixes from Michael Ellerman:
- Fix build error in vdso32 when building 64-bit with COMPAT=y and -Os
- Fix build error in pseries EEH when CONFIG_DEBUG_FS is not set
Thanks to Christophe Leroy, Narayana Murty N, Christian Zigotzky, and
Ritesh Harjani.
* tag 'powerpc-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/eeh: move pseries_eeh_err_inject() outside CONFIG_DEBUG_FS block
powerpc/vdso32: Fix use of crtsavres for PPC64
Pull clang-format updates from Miguel Ojeda:
"A routine update of the 'for_each' macro list"
* tag 'clang-format-6.12' of https://github.com/ojeda/linux:
clang-format: Update with v6.11-rc1's `for_each` macro list
Currently the Rust support is gated on not having MODVERSIONS enabled,
and as a result an "allmodconfig" build will disable Rust build tests.
While MODVERSIONS configurations are worth build testing, the feature is
not actually meaningful unless you run the result, and I'd rather get
build coverage of Rust than MODVERSIONS. So let's disable MODVERSIONS
for build testing until the Rust side clears up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up
objtool warnings), teach objtool about 'noreturn' Rust symbols and
mimic '___ADDRESSABLE()' for 'module_{init,exit}'. With that, we
should be objtool-warning-free, so enable it to run for all Rust
object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on
change.
- Split helpers file into several files in a folder, to avoid
conflicts in it. Eventually those files will be moved to the right
places with the new build system. In addition, remove the need to
manually export the symbols defined there, reusing existing
machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a
'ListArc' exists using an atomic), 'ListLinks' (the prev/next
pointers for an item in a linked list), 'List' (the linked list
itself), 'Iter' (an iterator over a 'List'), 'Cursor' (a cursor
into a 'List' that allows to remove elements), 'ListArcField' (a
field exclusively owned by a 'ListArc'), as well as support for
heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the
upcoming Rust Binder.
This includes 'RBTree' (the red-black tree itself), 'RBTreeNode' (a
node), 'RBTreeNodeReservation' (a memory reservation for a node),
'Iter' and 'IterMut' (immutable and mutable iterators), 'Cursor'
(bidirectional cursor that allows to remove elements), as well as
an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the
'InPlaceWrite' trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for
those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits"
* tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux: (54 commits)
kasan: rust: Add KASAN smoke test via UAF
kbuild: rust: Enable KASAN support
rust: kasan: Rust does not support KHWASAN
kbuild: rust: Define probing macros for rustc
kasan: simplify and clarify Makefile
rust: cfi: add support for CFI_CLANG with Rust
cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS
rust: support for shadow call stack sanitizer
docs: rust: include other expressions in conditional compilation section
kbuild: rust: replace proc macros dependency on `core.o` with the version text
kbuild: rust: rebuild if the version text changes
kbuild: rust: re-run Kconfig if the version text changes
kbuild: rust: add `CONFIG_RUSTC_VERSION`
rust: avoid `box_uninit_write` feature
MAINTAINERS: add Trevor Gross as Rust reviewer
rust: rbtree: add `RBTree::entry`
rust: rbtree: add cursor
rust: rbtree: add mutable iterator
rust: rbtree: add iterator
rust: rbtree: add red-black tree implementation backed by the C version
...
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add a 'noalignwrite' mount option for lock-less 'lost writes' prevention
- Add support for the LOCALIO protocol extention
Bugfixes:
- Fix memory leak in error path of nfs4_do_reclaim()
- Simplify and guarantee lock owner uniqueness
- Fix -Wformat-truncation warning
- Fix folio refcounts by using folio_attach_private()
- Fix failing the mount system call when the server is down
- Fix detection of "Proxying of Times" server support
Cleanups:
- Annotate struct nfs_cache_array with __counted_by()
- Remove unnecessary NULL checks before kfree()
- Convert RPC_TASK_* constants to an enum
- Remove obsolete or misleading comments and declerations"
* tag 'nfs-for-6.12-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (41 commits)
nfs: Fix `make htmldocs` warnings in the localio documentation
nfs: add "NFS Client and Server Interlock" section to localio.rst
nfs: add FAQ section to Documentation/filesystems/nfs/localio.rst
nfs: add Documentation/filesystems/nfs/localio.rst
nfs: implement client support for NFS_LOCALIO_PROGRAM
nfs/localio: use dedicated workqueues for filesystem read and write
pnfs/flexfiles: enable localio support
nfs: enable localio for non-pNFS IO
nfs: add LOCALIO support
nfs: pass struct nfsd_file to nfs_init_pgio and nfs_init_commit
nfsd: implement server support for NFS_LOCALIO_PROGRAM
nfsd: add LOCALIO support
nfs_common: prepare for the NFS client to use nfsd_file for LOCALIO
nfs_common: add NFS LOCALIO auxiliary protocol enablement
SUNRPC: replace program list with program array
SUNRPC: add svcauth_map_clnt_to_svc_cred_local
SUNRPC: remove call_allocate() BUG_ONs
nfsd: add nfsd_serv_try_get and nfsd_serv_put
nfsd: add nfsd_file_acquire_local()
nfsd: factor out __fh_verify to allow NULL rqstp to be passed
...
Pull fuse updates from Miklos Szeredi:
- Add support for idmapped fuse mounts (Alexander Mikhalitsyn)
- Add optimization when checking for writeback (yangyun)
- Add tracepoints (Josef Bacik)
- Clean up writeback code (Joanne Koong)
- Clean up request queuing (me)
- Misc fixes
* tag 'fuse-update-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (32 commits)
fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set
fuse: clear FR_PENDING if abort is detected when sending request
fs/fuse: convert to use invalid_mnt_idmap
fs/mnt_idmapping: introduce an invalid_mnt_idmap
fs/fuse: introduce and use fuse_simple_idmap_request() helper
fs/fuse: fix null-ptr-deref when checking SB_I_NOIDMAP flag
fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN
virtio_fs: allow idmapped mounts
fuse: allow idmapped mounts
fuse: warn if fuse_access is called when idmapped mounts are allowed
fuse: handle idmappings properly in ->write_iter()
fuse: support idmapped ->rename op
fuse: support idmapped ->set_acl
fuse: drop idmap argument from __fuse_get_acl
fuse: support idmapped ->setattr op
fuse: support idmapped ->permission inode op
fuse: support idmapped getattr inode op
fuse: support idmap for mkdir/mknod/symlink/create/tmpfile
fuse: support idmapped FUSE_EXT_GROUPS
fuse: add an idmap argument to fuse_simple_request
...
Pull exfat updates from Namjae Jeon:
- Clean-up unnecessary codes as ->valid_size is supported
- buffered-IO fallback is no longer needed when using direct-IO
- Move ->valid_size extension from mmap to ->page_mkwrite. This
improves the overhead caused by unnecessary zero-out during mmap.
- Fix memleaks from exfat_load_bitmap() and exfat_create_upcase_table()
- Add sops->shutdown and ioctl
- Add Yuezhang Mo as a reviwer
* tag 'exfat-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
MAINTAINERS: exfat: add myself as reviewer
exfat: resolve memory leak from exfat_create_upcase_table()
exfat: move extend valid_size into ->page_mkwrite()
exfat: fix memory leak in exfat_load_bitmap()
exfat: Implement sops->shutdown and ioctl
exfat: do not fallback to buffered write
exfat: drop ->i_size_ondisk
Pull f2fs updates from Jaegeuk Kim:
"The main changes include converting major IO paths to use folio, and
adding various knobs to control GC more flexibly for Zoned devices.
In addition, there are several patches to address corner cases of
atomic file operations and better support for file pinning on zoned
device.
Enhancement:
- add knobs to tune foreground/background GCs for Zoned devices
- convert IO paths to use folio
- reduce expensive checkpoint trigger frequency
- allow F2FS_IPU_NOCACHE for pinned file
- forcibly migrate to secure space for zoned device file pinning
- get rid of buffer_head use
- add write priority option based on zone UFS
- get rid of online repair on corrupted directory
Bug fixes:
- fix to don't panic system for no free segment fault injection
- fix to don't set SB_RDONLY in f2fs_handle_critical_error()
- avoid unused block when dio write in LFS mode
- compress: don't redirty sparse cluster during {,de}compress
- check discard support for conventional zones
- atomic: prevent atomic file from being dirtied before commit
- atomic: fix to check atomic_file in f2fs ioctl interfaces
- atomic: fix to forbid dio in atomic_file
- atomic: fix to truncate pagecache before on-disk metadata truncation
- atomic: create COW inode from parent dentry
- atomic: fix to avoid racing w/ GC
- atomic: require FMODE_WRITE for atomic write ioctls
- fix to wait page writeback before setting gcing flag
- fix to avoid racing in between read and OPU dio write, dio completion
- fix several potential integer overflows in file offsets and dir_block_index
- fix to avoid use-after-free in f2fs_stop_gc_thread()
As usual, there are several code clean-ups and refactorings"
* tag 'f2fs-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (60 commits)
f2fs: allow F2FS_IPU_NOCACHE for pinned file
f2fs: forcibly migrate to secure space for zoned device file pinning
f2fs: remove unused parameters
f2fs: fix to don't panic system for no free segment fault injection
f2fs: fix to don't set SB_RDONLY in f2fs_handle_critical_error()
f2fs: add valid block ratio not to do excessive GC for one time GC
f2fs: create gc_no_zoned_gc_percent and gc_boost_zoned_gc_percent
f2fs: do FG_GC when GC boosting is required for zoned devices
f2fs: increase BG GC migration window granularity when boosted for zoned devices
f2fs: add reserved_segments sysfs node
f2fs: introduce migration_window_granularity
f2fs: make BG GC more aggressive for zoned devices
f2fs: avoid unused block when dio write in LFS mode
f2fs: fix to check atomic_file in f2fs ioctl interfaces
f2fs: get rid of online repaire on corrupted directory
f2fs: prevent atomic file from being dirtied before commit
f2fs: get rid of page->index
f2fs: convert read_node_page() to use folio
f2fs: convert __write_node_page() to use folio
f2fs: convert f2fs_write_data_page() to use folio
...
Pull bpf 'struct fd' updates from Alexei Starovoitov:
"This includes struct_fd BPF changes from Al and Andrii"
* tag 'bpf-next-6.12-struct-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf: convert bpf_token_create() to CLASS(fd, ...)
security,bpf: constify struct path in bpf_token_create() LSM hook
bpf: more trivial fdget() conversions
bpf: trivial conversions for fdget()
bpf: switch maps to CLASS(fd, ...)
bpf: factor out fetching bpf_map from FD and adding it to used_maps list
bpf: switch fdget_raw() uses to CLASS(fd_raw, ...)
bpf: convert __bpf_prog_get() to CLASS(fd, ...)
Pull Kbuild updates from Masahiro Yamada:
- Support cross-compiling linux-headers Debian package and kernel-devel
RPM package
- Add support for the linux-debug Pacman package
- Improve module rebuilding speed by factoring out the common code to
scripts/module-common.c
- Separate device tree build rules into scripts/Makefile.dtbs
- Add a new script to generate modules.builtin.ranges, which is useful
for tracing tools to find symbols in built-in modules
- Refactor Kconfig and misc tools
- Update Kbuild and Kconfig documentation
* tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
kbuild: doc: replace "gcc" in external module description
kbuild: doc: describe the -C option precisely for external module builds
kbuild: doc: remove the description about shipped files
kbuild: doc: drop section numbering, use references in modules.rst
kbuild: doc: throw out the local table of contents in modules.rst
kbuild: doc: remove outdated description of the limitation on -I usage
kbuild: doc: remove description about grepping CONFIG options
kbuild: doc: update the description about Kbuild/Makefile split
kbuild: remove unnecessary export of RUST_LIB_SRC
kbuild: remove append operation on cmd_ld_ko_o
kconfig: cache expression values
kconfig: use hash table to reuse expressions
kconfig: refactor expr_eliminate_dups()
kconfig: add comments to expression transformations
kconfig: change some expr_*() functions to bool
scripts: move hash function from scripts/kconfig/ to scripts/include/
kallsyms: change overflow variable to bool type
kallsyms: squash output_address()
kbuild: add install target for modules.builtin.ranges
scripts: add verifier script for builtin module range data
...
Pull cpupower updates from Shuah Khan
"The 'raw_pylibcpupower.i' file was being removed by "make mrproper".
That was because '*.i', '.s' and '*.o' files are generated during
kernel compile and removed when the repo is cleaned by mrproper.
Rename it to use .swg extension instead to avoid the problem.
A second patch removes references to it from .gitignore"
* tag 'linux-cpupower-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
pm: cpupower: Clean up bindings gitignore
pm: cpupower: rename raw_pylibcpupower.i
Pull i3c updates from Alexandre Belloni:
"This adds support for the I3C HCI controller of the AMD SoC which as
expected requires quirks. Also fixes for the other drivers, including
rate selection fixes for svc.
Core:
- allow adjusting first broadcast address speed
Drivers:
- cdns: few fixes
- mipi-i3c-hci: Add AMD SoC I3C controller support and quirks, fix
get_i3c_mode
- svc: adjust rates, fix race condition"
* tag 'i3c/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition
i3c: master: cdns: Fix use after free vulnerability in cdns_i3c_master Driver Due to Race Condition
i3c: master: svc: adjust SDR according to i3c spec
i3c: master: svc: use slow speed for first broadcast address
i3c: master: support to adjust first broadcast address speed
i3c/master: cmd_v1: Fix the rule for getting i3c mode
i3c: master: cdns: fix module autoloading
i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold
i3c: mipi-i3c-hci: Add a quirk to set timing parameters
i3c: mipi-i3c-hci: Relocate helper macros to HCI header file
i3c: mipi-i3c-hci: Add a quirk to set PIO mode
i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1
i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List
The TI_K3_M4_REMOTEPROC Kconfig entry selects OMAP2PLUS_MBOX, but that
driver in turn depends on other things, which the k4-m4 driver didn't.
This causes a Kconfig time warning:
WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
Selected by [m]:
- TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])
because you can't select something that is unavailable.
Make the dependencies for TI_K3_M4_REMOTEPROC match those of the
OMAP2PLUS_MBOX driver that it needs.
Fixes: ebcf9008a8 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Hari Nagalla <hnagalla@ti.com>
Cc: Andrew Davis <afd@ti.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull input updates from Dmitry Torokhov:
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch
IC registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup
functions to simplify releasing of resources (with more drivers to
follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes
* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
ARM: spitz: fix compile error when matrix keypad driver is enabled
Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: adp5588-keys - fix check on return code
Input: Convert comma to semicolon
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
Input: ims-pcu - fix calling interruptible mutex
Input: zforce_ts - switch to using asynchronous probing
Input: zforce_ts - remove assert/deassert wrappers
Input: zforce_ts - do not hardcode interrupt level
Input: zforce_ts - switch to using devm_regulator_get_enable()
Input: zforce_ts - stop treating VDD regulator as optional
Input: zforce_ts - make zforce_idtable constant
Input: zforce_ts - use dev_err_probe() where appropriate
Input: zforce_ts - do not ignore errors when acquiring regulator
Input: zforce_ts - make parsing of contacts less confusing
Input: zforce_ts - switch to using get_unaligned_le16
Input: zforce_ts - use guard notation when acquiring mutexes
...
Pull hwspinlock update from Bjorn Andersson:
"This converts the Spreadtrum hardware spinlock DeviceTree binding to
YAML, to allow validation of related DeviceTree source"
* tag 'hwlock-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
dt-bindings: hwlock: sprd-hwspinlock: convert to YAML
Pull rpmsg updates from Bjorn Andersson:
- Minor cleanup/refactor to the Qualcomm GLINK code, in order to add
trace events related to the messages exchange with the remote side,
useful for debugging a range of interoperability issues
- Rewrite the nested structs with flexible array members in order to
avoid the risk of invalid accesses
* tag 'rpmsg-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: Avoid -Wflex-array-member-not-at-end warnings
rpmsg: glink: Introduce packet tracepoints
rpmsg: glink: Pass channel to qcom_glink_send_close_ack()
rpmsg: glink: Tidy up RX advance handling
Pull remoteproc updates from Bjorn Andersson:
- Add remoteproc support for the Cortex M4F found in AM62x and AM64x of
the TI K3 family, support for the modem remoteproc in the Qualcomm
SDX75, and audio, compute and general-purpose DSPs of the Qualcomm
SA8775P.
- Add support for blocking and non-blocking mailbox transmissions to
the i.MX remoteproc driver, and implement poweroff and reboot
mechanisms using them. Plus a few bug fixes and minor improvements.
- Cleanups and bug fixes for the TI K3 DSP and R5F drivers
- Support mapping SRAM regions into the AMD-Xilinx Zynqmp R5 cores
- Use devres helpers for various allocations in the Ingenic, TI DA8xx,
TI Keystone, TI K3, ST slim drivers
- Replace uses of of_{find,get}_property() with of_property_present()
where possible
* tag 'rproc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteporc: ingenic: Use devm_platform_ioremap_resource_byname()
remoteproc: da8xx: Use devm_platform_ioremap_resource_byname()
remoteproc: st_slim: Use devm_platform_ioremap_resource_byname()
remoteproc: xlnx: Add sram support
remoteproc: k3-r5: Fix error handling when power-up failed
remoteproc: imx_rproc: Add support for poweroff and reboot
remoteproc: imx_rproc: Allow setting of the mailbox transmit mode
remoteproc: k3-r5: Delay notification of wakeup event
remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
remoteproc: k3: Factor out TI-SCI processor control OF get function
dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs
remoteproc: k3-dsp: Acquire mailbox handle during probe routine
remoteproc: k3-r5: Acquire mailbox handle during probe routine
remoteproc: k3-r5: Use devm_rproc_alloc() helper
remoteproc: qcom: pas: Add support for SA8775p ADSP, CDSP and GPDSP
remoteproc: qcom: pas: Add SDX75 remoteproc support
dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
remoteproc: keystone: Use devm_rproc_alloc() helper
remoteproc: keystone: Use devm_kasprintf() to build name string
dt-bindings: remoteproc: xlnx,zynqmp-r5fss: Add missing "additionalProperties" on child nodes
...
Pull VFIO updates from Alex Williamson:
"Just a few cleanups this cycle:
- Remove several unused structure and function declarations, and
unused variables (Dr. David Alan Gilbert, Yue Haibing, Zhang Zekun)
- Constify unmodified structure in mdev (Hongbo Li)
- Convert to unsigned type to catch overflow with less fanfare than
passing a negative value to kcalloc() (Dan Carpenter)"
* tag 'vfio-v6.12-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: clean up a type in vfio_pci_ioctl_pci_hot_reset_groups()
vfio/mdev: Constify struct kobj_type
vfio: mdev: Remove unused function declarations
vfio/fsl-mc: Remove unused variable 'hwirq'
vfio/pci: Remove unused struct 'vfio_pci_mmap_vma'
Pull dma-mapping fixes from Christoph Hellwig:
- sort out a few issues with the direct calls to iommu-dma (Christoph
Hellwig, Leon Romanovsky)
* tag 'dma-mapping-6.12-2024-09-24' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: report unlimited DMA addressing in IOMMU DMA path
iommu/dma: remove most stubs in iommu-dma.h
dma-mapping: fix vmap and mmap of noncontiougs allocations
Pull iommufd updates from Jason Gunthorpe:
"Collection of small cleanup and one fix:
- Sort headers and struct forward declarations
- Fix random selftest failures in some cases due to dirty tracking
tests
- Have the reserved IOVA regions mechanism work when a HWPT is used
as a nesting parent. This updates the nesting parent's IOAS with
the reserved regions of the device and will also install the ITS
doorbell page on ARM.
- Add missed validation of parent domain ops against the current
iommu
- Fix a syzkaller bug related to integer overflow during ALIGN()
- Tidy two iommu_domain attach paths"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu: Set iommu_attach_handle->domain in core
iommufd: Avoid duplicated __iommu_group_set_core_domain() call
iommufd: Protect against overflow of ALIGN() during iova allocation
iommufd: Reorder struct forward declarations
iommufd: Check the domain owner of the parent before creating a nesting domain
iommufd/device: Enforce reserved IOVA also when attached to hwpt_nested
iommufd/selftest: Fix buffer read overrrun in the dirty test
iommufd: Reorder include files
Pull rdma updates from Jason Gunthorpe:
"Usual collection of small improvements and fixes, nothing especially
stands out to me here.
The new multipath PCI feature is a sign of things to come, I think we
will see more of this in the next 10 years. Broadcom and HNS continue
to update their drivers for their new HW generations.
Summary:
- Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts,
hfi, erdma, hns, irdma
- Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls
- Multipath PCI for mlx5
- Variable size work queue, SRQ changes, and relaxed ordering for new
bnxt HW
- New ODP fault resolution FW protocol in mlx5
- New 'rdma monitor' netlink mechanism"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA/bnxt_re: Remove the unused variable en_dev
RDMA/nldev: Add missing break in rdma_nl_notify_err_msg()
RDMA/irdma: fix error message in irdma_modify_qp_roce()
RDMA/cxgb4: Added NULL check for lookup_atid
RDMA/hns: Fix ah error counter in sw stat not increasing
RDMA/bnxt_re: Recover the device when FW error is detected
RDMA/bnxt_re: Group all operations under add_device and remove_device
RDMA/bnxt_re: Use the aux device for L2 ULP callbacks
RDMA/bnxt_re: Change aux driver data to en_info to hold more information
RDMA/nldev: Expose whether RDMA monitoring is supported
RDMA/nldev: Add support for RDMA monitoring
RDMA/mlx5: Use IB set_netdev and get_netdev functions
RDMA/device: Remove optimization in ib_device_get_netdev()
RDMA/mlx5: Initialize phys_port_cnt earlier in RDMA device creation
RDMA/mlx5: Obtain upper net device only when needed
RDMA/mlx5: Check RoCE LAG status before getting netdev
RDMA/mlx5: Consider the query_vuid cap for data_direct
net/mlx5: Handle memory scheme ODP capabilities
RDMA/mlx5: Add implicit MR handling to ODP memory scheme
RDMA/mlx5: Add handling for memory scheme page fault events
...
Pull sched_ext fixes from Tejun Heo:
- Three build fixes
- The fix for a stall bug introduced by a recent optimization in sched
core (SM_IDLE)
- Addition of /sys/kernel/sched_ext/enable_seq. While not a fix, it is
a simple addition that distro people want to be able to tell whether
an SCX scheduler has ever been loaded on the system
* tag 'sched_ext-for-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Provide a sysfs enable_seq counter
sched_ext: Fix build when !CONFIG_STACKTRACE
sched, sched_ext: Disable SM_IDLE/rq empty path when scx_enabled()
sched: Put task_group::idle under CONFIG_GROUP_SCHED_WEIGHT
sched: Add dummy version of sched_group_set_idle()
Pull more io_uring updates from Jens Axboe:
"Mostly just a set of fixes in here, or little changes that didn't get
included in the initial pull request. This contains:
- Move the SQPOLL napi polling outside the submission lock (Olivier)
- Rename of the "copy buffers" API that got added in the 6.12 merge
window. There's really no copying going on, it's just referencing
the buffers. After a bit of consideration, decided that it was
better to simply rename this to avoid potential confusion (me)
- Shrink struct io_mapped_ubuf from 48 to 32 bytes, by changing it to
start + len tracking rather than having start / end in there, and
by removing the caching of folio_mask when we can just calculate it
from folio_shift when we need it (me)
- Fixes for the SQPOLL affinity checking (me, Felix)
- Fix for how cqring waiting checks for the presence of task_work.
Just check it directly rather than check for a specific
notification mechanism (me)
- Tweak to how request linking is represented in tracing (me)
- Fix a syzbot report that deliberately sets up a huge list of
overflow entries, and then hits rcu stalls when flushing this list.
Just check for the need to preempt, and drop/reacquire locks in the
loop. There's no state maintained over the loop itself, and each
entry is yanked from head-of-list (me)"
* tag 'for-6.12/io_uring-20240922' of git://git.kernel.dk/linux:
io_uring: check if we need to reschedule during overflow flush
io_uring: improve request linking trace
io_uring: check for presence of task_work rather than TIF_NOTIFY_SIGNAL
io_uring/sqpoll: do the napi busy poll outside the submission block
io_uring: clean up a type in io_uring_register_get_file()
io_uring/sqpoll: do not put cpumask on stack
io_uring/sqpoll: retain test for whether the CPU is valid
io_uring/rsrc: change ubuf->ubuf_end to length tracking
io_uring/rsrc: get rid of io_mapped_ubuf->folio_mask
io_uring: rename "copy buffers" to "clone buffers"
Pull sysctl update from Joel Granados:
- Avoid evaluating non-mount ctl_tables as a sysctl_mount_point by
removing the unlikely (but possible) chance that the permanently
empty ctl_table array shares its address with another ctl_table
- Update Joel Granados' contact info in MAINTAINERS
* tag 'sysctl-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
MAINTAINERS: update email for Joel Granados
sysctl: avoid spurious permanent empty tables
Pull RISC-V updates from Palmer Dabbelt:
- Support using Zkr to seed KASLR
- Support IPI-triggered CPU backtracing
- Support for generic CPU vulnerabilities reporting to userspace
- A few cleanups for missing licenses
- The size limit on the XIP kernel has been removed
- Support for tracing userspace stacks
- Support for the Svvptc extension
- Various cleanups and fixes throughout the tree
* tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (47 commits)
crash: Fix riscv64 crash memory reserve dead loop
perf/riscv-sbi: Add platform specific firmware event handling
tools: Optimize ring buffer for riscv
tools: Add riscv barrier implementation
RISC-V: Don't have MAX_PHYSMEM_BITS exceed phys_addr_t
ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
riscv: Enable bitops instrumentation
riscv: Omit optimized string routines when using KASAN
ACPI: RISCV: Make acpi_numa_get_nid() to be static
riscv: Randomize lower bits of stack address
selftests: riscv: Allow mmap test to compile on 32-bit
riscv: Make riscv_isa_vendor_ext_andes array static
riscv: Use LIST_HEAD() to simplify code
riscv: defconfig: Disable RZ/Five peripheral support
RISC-V: Implement kgdb_roundup_cpus() to enable future NMI Roundup
riscv: avoid Imbalance in RAS
riscv: cacheinfo: Add back init_cache_level() function
riscv: Remove unused _TIF_WORK_MASK
drivers/perf: riscv: Remove redundant macro check
riscv: define ILLEGAL_POINTER_VALUE for 64bit
...
Pull m68knommu fixlet from Greg Ungerer:
"Only a single change, cleaning up white space in debug message"
* tag 'm68knommu-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: remove trailing space after \n newline
Pull landlock updates from Mickaël Salaün:
"We can now scope a Landlock domain thanks to a new "scoped" field that
can deny interactions with resources outside of this domain.
The LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET flag denies connections to an
abstract UNIX socket created outside of the current scoped domain, and
the LANDLOCK_SCOPE_SIGNAL flag denies sending a signal to processes
outside of the current scoped domain.
These restrictions also apply to nested domains according to their
scope. The related changes will also be useful to support other kind
of IPC isolations"
* tag 'landlock-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Document LANDLOCK_SCOPE_SIGNAL
samples/landlock: Add support for signal scoping
selftests/landlock: Test signal created by out-of-bound message
selftests/landlock: Test signal scoping for threads
selftests/landlock: Test signal scoping
landlock: Add signal scoping
landlock: Document LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET
samples/landlock: Add support for abstract UNIX socket scoping
selftests/landlock: Test inherited restriction of abstract UNIX socket
selftests/landlock: Test connected and unconnected datagram UNIX socket
selftests/landlock: Test UNIX sockets with any address formats
selftests/landlock: Test abstract UNIX socket scoping
selftests/landlock: Test handling of unknown scope
landlock: Add abstract UNIX socket scoping
Pull key updates from Jarkko Sakkinen:
"The bulk of this is OpenSSL 3.0 compatibility fixes for the signing
and certificates"
* tag 'keys-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
sign-file,extract-cert: use pkcs11 provider for OPENSSL MAJOR >= 3
sign-file,extract-cert: avoid using deprecated ERR_get_error_line()
sign-file,extract-cert: move common SSL helper functions to a header
KEYS: prevent NULL pointer dereference in find_asymmetric_key()
KEYS: Remove unused declarations
Pull LSM fixes from Paul Moore:
- Add a missing security_mmap_file() check to the remap_file_pages()
syscall
- Properly reference the SELinux and Smack LSM blobs in the
security_watch_key() LSM hook
- Fix a random IPE selftest crash caused by a missing list terminator
in the test
* tag 'lsm-pr-20240923' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
ipe: Add missing terminator to list of unit tests
selinux,smack: properly reference the LSM blob in security_watch_key()
mm: call the security_mmap_file() LSM hook in remap_file_pages()
This may be a typo. The comment has said shared locks are
not allowed when this bit is set. If using shared lock, the
wait in `fuse_file_cached_io_open` may be forever.
Fixes: 205c1d8026 ("fuse: allow parallel dio writes with FUSE_DIRECT_IO_ALLOW_MMAP")
CC: stable@vger.kernel.org # v6.9
Signed-off-by: yangyun <yangyun50@huawei.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull media updates from Mauro Carvalho Chehab:
- New CEC driver: Extron DA HD 4K Plus
- Lots of driver fixes, cleanups and improvements
* tag 'media/v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (179 commits)
media: atomisp: Use clamp() in ia_css_eed1_8_vmem_encode()
media: atomisp: Fix eed1_8 code assigning signed values to an unsigned variable
media: atomisp: set lock before calling vb2_queue_init()
media: atomisp: Improve binary finding debug logging
media: atomisp: Drop dev_dbg() calls from hmm_[alloc|free]()
media: atomisp: csi2-bridge: Add DMI quirk for t4ka3 on Xiaomi Mipad2
media: atomisp: add missing wait_prepare/finish ops
media: atomisp: Remove unused declaration
media: atomisp: use clamp() in compute_coring()
media: atomisp: use clamp() in ia_css_eed1_8_encode()
media: atomisp: Simplify ia_css_pipe_create_cas_scaler_desc_single_output()
media: atomisp: Replace rarely used macro from math_support.h
media: atomisp: Remove duplicated leftover, i.e. sh_css_dvs_info.h
media: atomisp: bnr: fix trailing statement
media: atomisp: move trailing */ to separate lines
media: atomisp: move trailing statement to next line.
media: atomisp: Fix trailing statement in ia_css_de.host.c
media: atomisp: Fix spelling mistakes in atomisp.h
media: atomisp: Fix spelling mistakes in atomisp_platform.h
media: atomisp: Fix spelling mistake in csi_rx_public.h
...
Pull clk updates from Stephen Boyd:
"The core clk framework is left largely untouched this time around
except for support for the newly ratified DT property
'assigned-clock-rates-u64'.
I'm much more excited about the support for loading DT overlays from
KUnit tests so that we can test how the clk framework parses DT nodes
during clk registration. The clk framework has some places that are
highly DeviceTree dependent so this charts the path to extend the
KUnit tests to cover even more framework code in the future. I've got
some more tests on the list that use the DT overlay support, but they
uncovered issues with clk unregistration that I'm still working on
fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm
and Renesas SoCs, making it fairly usual. Looking closer, there are
fixes for things all over the place, like adding missing clk
frequencies or moving defines for the number of clks out of DT binding
headers into the drivers. There are even conversions of DT bindings to
YAML and migration away from strings to describe clk topology. Overall
it doesn't look unusual so I expect the new drivers to be where we'll
have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid
them turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs
and add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel
clocks on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating
more memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D
lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the i.MXRT1050
driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits)
clk: Switch back to struct platform_driver::remove()
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
clk: provide devm_clk_get_optional_enabled_with_rate()
clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
clk: renesas: rzv2h: Add support for dynamic switching divider clocks
clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
clk: rockchip: fix error for unknown clocks
clk: rockchip: rk3588: drop unused code
clk: rockchip: Add clock controller for the RK3576
clk: rockchip: Add new pll type pll_rk3588_ddr
dt-bindings: clock, reset: Add support for rk3576
dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
clk: imx95: enable the clock of NETCMIX block control
dt-bindings: clock: add RMII clock selection
dt-bindings: clock: add i.MX95 NETCMIX block control
clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
...
Pull i2c updates from Wolfram Sang:
"I2C core:
- finally remove the I2C_COMPAT symbol after 15 years of deprecation
- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation
- use scoped foreach OF child loops
- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts
I2C host drivers:
- DesignWare and Renesas I2C driver updates.
The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.
- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards
Cleanups:
- improve the exit path in the runtime resume function for the
Qualcomm Geni platform
- get rid of the unused "target_addr" parameter in the Intel LJCA
driver
- intialize the restart_flag in the MediaTek controller in one single
place
- constify a few global data structures in the virtio driver
- simplify the bus speed handling in the Renesas driver init function
making it more readable
- improved probe function of the Renesas R-Car driver
- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()
- iMX/MXC driver cleanups
- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers
Refactoring:
- Fix a potential out of boundary array access in the Nuvoton driver.
This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.
Improvements:
- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver
- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature
- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout
New Feature:
- support fast mode plus in the Renesas I2C (riic) driver
New support:
- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
- new i2c-keba.c driver
- new driver for The Mule i2c multiplexer
Core I2C framework:
- move runtime PM functions in order to allow them to be accessed
during device add
Devicetree:
- nVidia and Qualcomm binding improvements
- get rid of redundant "multi-master" property in the aspeed binding
- convert i2c-sprd binding to YAML
AT24 updates:
- document a new model from giantec in DT bindings"
* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...
Pull libnvdimm updates from Ira Weiny:
- use Open Firmware helper routines
- fix memory leak when nvdimm labels are incorrect
- remove some dead code
* tag 'libnvdimm-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Remove dead code for ENODEV checking in scan_labels()
nvdimm: Fix devs leaks in scan_labels()
nvdimm: Use of_property_present() and of_property_read_bool()
Pull backlight update from Lee Jones:
- Added a check for the return value of spi_setup() in the l4f00242t03
driver to catch errors
* tag 'backlight-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: l4f00242t03: Add check for spi_setup
Pull LED updates from Lee Jones:
- Limited LED current based on thermal conditions in the QCOM flash LED
driver
- Fixed device child node usage in the BD2606MVV and PCA995x drivers
- Used device_for_each_child_node_scoped() to access child nodes in the
IS31FL319X driver
- Reset the LED controller during the probe in the LM3601X driver
- Used device_for_each_child_node() to access device child nodes in the
PCA995X driver
- Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver
- Replaced msleep() with usleep_range() in the SUN50I-A100 driver
- Used scoped device node handling to simplify error paths in the
AAT1290, KTD2692, and MC13783 drivers
- Added missing of_node_get for probe duration in the MAX77693 driver
- Simplified using for_each_available_child_of_node_scoped() loops when
iterating over device nodes
- Used devm_clk_get_enabled() helpers in the LP55XX driver
- Converted DT bindings from TXT to YAML format for various drivers,
including LM3692x and SC2731-BLTC
- Set num_leds after allocation in the GPIO driver
- Removed irrelevant blink configuration error message in the PCA9532
driver
- Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris
Omnia driver
* tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (38 commits)
leds: turris-omnia: Fix module autoloading with MODULE_DEVICE_TABLE()
leds: pca9532: Remove irrelevant blink configuration error message
leds: gpio: Set num_leds after allocation
dt-bindings: leds: Convert leds-lm3692x to YAML format
leds: lp55xx: Use devm_clk_get_enabled() helpers
leds: as3645a: Use device_* to iterate over device child nodes
leds: qcom-lpg: Simplify with scoped for each OF child loop
leds: turris-omnia: Simplify with scoped for each OF child loop
leds: sc27xx: Simplify with scoped for each OF child loop
leds: pca9532: Simplify with scoped for each OF child loop
leds: netxbig: Simplify with scoped for each OF child loop
leds: mt6323: Simplify with scoped for each OF child loop
leds: mc13783: Use scoped device node handling to simplify error paths
leds: lp55xx: Simplify with scoped for each OF child loop
leds: is31fl32xx: Simplify with scoped for each OF child loop
leds: bcm6358: Simplify with scoped for each OF child loop
leds: bcm6328: Simplify with scoped for each OF child loop
leds: aw2013: Simplify with scoped for each OF child loop
leds: 88pm860x: Simplify with scoped for each OF child loop
leds: max77693: Simplify with scoped for each OF child loop
...
Pull MFD updates from Lee Jones:
- Added support for the Analog Devices ADP5585 GPIO and PWM functions
- Added parsing of GPIO hogs for the ADP5585
- Fixed module autoloading in the MAX14577 driver
- Simplified and cleaned up the CROS_EC driver
- Made the Lenovo Yoga Tab 3 X90F DMI match less strict in the
INTEL_SOC_PMIC_CHTWC driver
- Added support for the RK806 PMIC on the I2C bus
- Removed the remaining header file for the DS1WM driver
- Added compatible strings for various devices in the device tree
bindings
- Fixed a comma-related issue in the 88PM860X_CORE driver
- Constified read-only regmap structs in various drivers
- Used scoped variables with memory allocators to simplify error paths
in the MT6360 and SYSCON drivers
- Added Intel Arrow Lake-H and Panther Lake LPSS PCI IDs
* tag 'mfd-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
mfd: atc260x: Convert a bunch of commas to semicolons
dt-bindings: mfd: qcom,tcsr: Add compatible for sa8775p
mfd: intel-lpss: Add Intel Panther Lake LPSS PCI IDs
mfd: intel-lpss: Add Intel Arrow Lake-H LPSS PCI IDs
dt-bindings: mfd: syscon: Add rk3576 QoS register compatible
dt-bindings: mfd: adp5585: Add parsing of hogs
mfd: tc3589x: Drop vendorless compatible string from match table
mfd: qcom-spmi-pmic: Use for_each_child_of_node_scoped()
mfd: max77620: Use for_each_child_of_node_scoped()
mfd: intel_soc_pmic_chtwc: Make Lenovo Yoga Tab 3 X90F DMI match less strict
mfd: cros_ec: Update module description
mfd: cros_ec: Simplify and clean-up cros_ec_dev_init()
mfd: max14577: Provide MODULE_DEVICE_TABLE() to fix module autoloading
mfd: rk8xx: Add support for rk806 on i2c bus
dt-bindings: mfd: syscon: Add ti,j784s4-acspcie-proxy-ctrl compatible
mfd: ds1wm: Remove remaining header file
MAINTAINERS: Repair file entry in MARVELL 88PM886 PMIC DRIVER
mfd: 88pm860x-core: Convert comma to semicolon
mfd: syscon: Use scoped variables with memory allocators to simplify error paths
mfd: mt6360: Use scoped variables with memory allocators to simplify error paths
...
Pull dmaengine updates from Vinod Koul:
"Unusually, more new driver and device support than updates. Couple of
new device support, AMD, Rcar, Intel and New drivers in Freescale,
Loonsoon, AMD and LPC32XX with DT conversion and mode updates etc.
New support:
- Support for AMD Versal Gen 2 DMA IP
- Rcar RZ/G3S SoC dma controller
- Support for Intel Diamond Rapids and Granite Rapids-D dma controllers
- Support for Freescale ls1021a-qdma controller
- New driver for Loongson-1 APB DMA
- New driver for AMD QDMA
- Pl08x in LPC32XX router dma driver
Updates:
- Support for dpdma cyclic dma mode
- XML conversion for marvell xor dma bindings
- Dma clocks documentation for imx dma"
* tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits)
dmaengine: loongson1-apb-dma: Fix the build warning caused by the size of pdev_irqname
dmaengine: Fix spelling mistakes
dmaengine: Add dma router for pl08x in LPC32XX SoC
dmaengine: fsl-edma: add edma src ID check at request channel
dmaengine: fsl-edma: change to guard(mutex) within fsl_edma3_xlate()
dmaengine: avoid non-constant format string
dmaengine: imx-dma: Remove i.MX21 support
dt-bindings: dma: fsl,imx-dma: Document the DMA clocks
dmaengine: Loongson1: Add Loongson-1 APB DMA driver
dt-bindings: dma: Add Loongson-1 APB DMA
dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP
dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string
dmaengine: idxd: Add new DSA and IAA device IDs for Diamond Rapids platform
dmaengine: idxd: Add a new DSA device ID for Granite Rapids-D platform
dmaengine: ti: k3-udma: Remove unused declarations
dmaengine: amd: qdma: Add AMD QDMA driver
dmaengine: xilinx: dpdma: Add support for cyclic dma mode
dma: ipu: Remove include/linux/dma/ipu-dma.h
dt-bindings: dma: fsl-mxs-dma: Add compatible string "fsl,imx8qxp-dma-apbh"
dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma
...
Pull phy updates from Vinod Koul:
"New hw support:
- Rcar usb2 support for RZ/G3S SoC
- Nuvoton MA35 SoC USB 2.0 PHY driver
Removed:
- obsolete qcom,usb-8x16-phy bindings
Updates:
- 4 lane PCIe support for Qualcomm X1E80100
- Constify structure in subsystem update
- Subsystem simplification with scoped for each OF child loop update
- Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy
bindings"
* tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits)
phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings
phy: renesas: rcar-gen3-usb2: Add support to initialize the bus
phy: ti: j721e-wiz: Simplify with scoped for each OF child loop
phy: ti: j721e-wiz: Drop OF node reference earlier for simpler code
phy: ti: gmii-sel: Simplify with dev_err_probe()
phy: ti: am654-serdes: Use scoped device node handling to simplify error paths
phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loop
phy: mediatek: xsphy: Simplify with scoped for each OF child loop
phy: mediatek: tphy: Simplify with scoped for each OF child loop
phy: hisilicon: usb2: Simplify with scoped for each OF child loop
phy: cadence: sierra: Simplify with scoped for each OF child loop
phy: broadcom: brcm-sata: Simplify with scoped for each OF child loop
phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loop
phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY
dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings
phy: qcom: qmp-pcie: Configure all tables on port B PHY
phy: airoha: adjust initialization delay in airoha_pcie_phy_init()
dt-bindings: phy: socionext,uniphier: add top-level constraints
phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100
...
Pull soundwire updates from Vinod Koul:
- bus cleanup for warnings and probe deferral errors suppression
- cadence recheck for status with a delayed work
- intel interrupt rework on reset exit
* tag 'soundwire-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_bus_common: enable interrupts before exiting reset
soundwire: cadence: re-check Peripheral status with delayed_work
soundwire: bus: clean up probe warnings
soundwire: bus: drop unused driver name field
soundwire: bus: suppress probe deferral errors
Pull pin control updates from Linus Walleij:
"Core changes:
- Add support for "input-schmitt-microvolt" property, as used in the
Sophgo SoC
New drivers:
- Mobileye EyeQ5 pin controller, I think this is an automotive SoC
- Rockchip rk3576 pin control support
- Sophgo CV1800 series pin controllers: CV1800B, CV1812H and SG2000
Improvements:
- Gradual improvements to Renesas, Samsung, Qualcomm, Nuvoton and a
few other drivers"
* tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (67 commits)
pinctrl: intel: Constify struct intel_pinctrl parameter
pinctrl: Remove redundant null pointer checks in pinctrl_remove_device_debugfs()
pinctrl: baytrail: Drop duplicate return statement
pinctrl: intel: Inline intel_gpio_community_irq_handler()
dt-bindings: pinctrl: qcom: add missing type to GPIO hogs
pinctrl: madera: Simplify with dev_err_probe()
pinctrl: k210: Use devm_clk_get_enabled() helpers
pinctrl: Join split messages and remove double whitespace
pinctrl: renesas: rzg2l: Move pinconf_to_config_argument() call outside of switch cases
pinctrl: renesas: rzg2l: Introduce single macro for digital noise filter configuration
pinctrl: renesas: rzg2l: Replace of_node_to_fwnode() with more suitable API
pinctrl: mvebu: Fix devinit_dove_pinctrl_probe function
pinctrl: sunxi: Use devm_clk_get_enabled() helpers
pinctrl: sophgo: cv18xx: fix missed __iomem type identifier
pinctrl: stmfx: Use string_choices API instead of ternary operator
pinctrl: nomadik: Use kmemdup_array instead of kmemdup for multiple allocation
pinctrl: intel: Introduce for_each_intel_gpio_group() helper et al.
pinctrl: intel: Constify intel_get_community() returned object
pinctrl: intel: Implement high impedance support
pinctrl: intel: Add __intel_gpio_get_direction() helper
...
Pull PCIe non-transparent bridge updates from Jon Mason:
"Bug fixes for intel ntb driver debugfs, use after free in switchtec
driver, ntb transport rx ring buffers. Also, cleanups in printks,
kernel-docs, and idt driver comment"
* tag 'ntb-6.12' of https://github.com/jonmason/ntb:
ntb: Force physically contiguous allocation of rx ring buffers
ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition
ntb: idt: Fix the cacography in ntb_hw_idt.c
NTB: epf: don't misuse kernel-doc marker
NTB: ntb_transport: fix all kernel-doc warnings
ntb: Constify struct bus_type
ntb_perf: Fix printk format
ntb: intel: Fix the NULL vs IS_ERR() bug for debugfs_create_dir()
Pull firewire updates from Takashi Sakamoto:
"In the FireWire subsystem, tasklets have been used as the bottom half
of 1394 OHCi hardIRQ. In recent kernel updates, BH workqueues have
become available, and some developers have proposed replacing the
tasklet with a BH workqueue.
As a first step towards dropping tasklet use, the 1394 OHCI
isochronous context can use regular workqueues. In this context, the
batch of packets is processed in the specific queue, thus the timing
jitter caused by task scheduling is not so critical.
Additionally, DMA transmission can be scheduled per-packet basis,
therefore the context can be sleep between the operation of
transmissions. Furthermore, in-kernel protocol implementation involves
some CPU-bound tasks, which can sometimes consumes CPU time so long.
These characteristics suggest that normal workqueues are suitable,
through BH workqueues are not.
The replacement with a workqueue allows unit drivers to process the
content of packets in non-atomic context. It brings some reliefs to
some drivers in sound subsystem that spin-lock is not mandatory
anymore during isochronous packet processing.
Summary:
- Replace tasklet with workqueue for isochronous context
- Replace IDR with XArray
- Utilize guard macro where possible
- Print deprecation warning when enabling debug parameter of
firewire-ohci module
- Switch to nonatomic PCM operation"
* tag 'firewire-updates-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (55 commits)
firewire: core: rename cause flag of tracepoints event
firewire: core: update documentation of kernel APIs for flushing completions
firewire: core: add helper function to retire descriptors
Revert "firewire: core: move workqueue handler from 1394 OHCI driver to core function"
Revert "firewire: core: use mutex to coordinate concurrent calls to flush completions"
firewire: core: use mutex to coordinate concurrent calls to flush completions
firewire: core: move workqueue handler from 1394 OHCI driver to core function
firewire: core: fulfill documentation of fw_iso_context_flush_completions()
firewire: core: expose kernel API to schedule work item to process isochronous context
firewire: core: use WARN_ON_ONCE() to avoid superfluous dumps
ALSA: firewire: use nonatomic PCM operation
firewire: core: non-atomic memory allocation for isochronous event to user client
firewire: ohci: operate IT/IR events in sleepable work process instead of tasklet softIRQ
firewire: core: add local API to queue work item to workqueue specific to isochronous contexts
firewire: core: allocate workqueue to handle isochronous contexts in card
firewire: ohci: obsolete direct usage of printk_ratelimit()
firewire: ohci: deprecate debug parameter
firewire: core: update fw_device outside of device_find_child()
firewire: ohci: fix error path to detect initiated reset in TI TSB41BA3D phy
firewire: core/ohci: minor refactoring for computation of configuration ROM size
...
