snd_soc_card_jack_new() allowed to create jack kcontrol without pins,
but did not create kcontrols. The jack would not have kcontrols if pins
were not going to be added.
This renames the old snd_soc_card_jack_new() to
snd_soc_card_jack_new_pins() for use when pins are provided or will be
added later. The new snd_soc_card_jack_new() appropriately creates a
jack for use without pins and adds a kcontrol.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Link: https://lore.kernel.org/r/20220408041114.6024-1-akihiko.odaki@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver, OMAP1 specific, now omits clk_prepare/unprepare() steps, not
supported by OMAP1 custom implementation of clock API. However, non-CCF
stubs of those functions exist for use on such platforms until converted
to CCF.
Update the driver to be compatible with CCF implementation of clock API.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220407191202.46206-1-jmkrzyszt@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Stephen Kitt <steve@sk2.org>:
This series covers all the remaining changes to migrate
sound/soc/codecs i2c probes to probe_new, where the const struct
i2c_client * argument is unused; there are a few remaining files which
use the argument and will need i2c_match_id migration.
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This series is continuation of the IPC abstraction in the SOF driver in
preparation for supporting the new IPC supported by the SOF firmware.
It introduces abstraction for top-level IPC ops for sending/receiving
regular and large IPC's.
Peter Ujfalusi (15):
ASoC: SOF: Add helper function to prepare and send an IPC message
ASoC: SOF: Add high level IPC IO callback definitions to ipc_ops
ASoC: SOF: ipc3: Implement the tx_msg IPC ops
ASoC: SOF: ipc3: Use sof_ipc3_tx_msg() internally for message sending
ASoC: SOF: ipc3: Implement the set_get_data IPC ops
ASoC: SOF: ipc3: Implement the get_reply IPC ops
ASoC: SOF: ipc3: Implement rx_msg IPC ops
ASoC: SOF: ipc: Separate the ops checks by functions/topics
ASoC: SOF: ipc: Add check for mandatory IPC message handling ops
ASoC: SOF: ipc: Use the get_reply ops in snd_sof_ipc_get_reply()
ASoC: SOF: ipc: Switch over to use the tx_msg and set_get_data ops
ASoC: SOF: ipc: Switch over to use the rx_msg ops
ASoC: SOF: Add widget_kcontrol_setup control ops for IPC3
ASoC: SOF: sof-audio: Use the widget_kcontrol_setup ops for kcontrol
set up
ASoC: SOF: ipc: Move the ipc_set_get_comp_data() local to ipc3-control
sound/soc/sof/ipc.c | 858 ++---------------------------------
sound/soc/sof/ipc3-control.c | 131 +++++-
sound/soc/sof/ipc3.c | 682 +++++++++++++++++++++++++++-
sound/soc/sof/sof-audio.c | 54 +--
sound/soc/sof/sof-audio.h | 7 +-
sound/soc/sof/sof-priv.h | 28 +-
6 files changed, 880 insertions(+), 880 deletions(-)
--
2.25.1
Merge series from Mario Limonciello <mario.limonciello@amd.com>:
It's not possible to probe for the presence of a DMIC, so the ACP6x
machine driver currently has a hardcoded list of all the systems known
to have a DMIC connected to the ACP.
Although this design works it means that the acp6x driver needs to always
grow with more systems and worse, if an OEM introduces a new system there
will be a mismatch in time that even if the driver (otherwise) works fine
it needs their system added to the list to work.
So this series introduces a _DSD that OEMs can populate into the BIOS to
indicate presence of a DMIC.
sound/soc/tegra/tegra186_asrc.c:90:12: error: ‘tegra186_asrc_runtime_resume’ defined but not used [-Werror=unused-function]
static int tegra186_asrc_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/tegra/tegra186_asrc.c:80:12: error: ‘tegra186_asrc_runtime_suspend’ defined but not used [-Werror=unused-function]
static int tegra186_asrc_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mark these functions as __maybe_unused to avoid this kind of warning.
Fixes: a2df8c2d5b ("ASoC: tegra: Add Tegra186 based ASRC driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20220411020908.580-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-15-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-14-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-13-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-12-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-11-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-10-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-9-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-8-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-7-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-6-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-5-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-4-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-3-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-2-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the acp6x machine driver requires a hardcoded list of systems
that physically have DMIC connected.
To avoid having to continually add to an evergrowing list of systems add
support for a _DSD that can advertise this.
OEMs can add this _DSD to their BIOS under the ACP device to automatically
add the device to this driver without requiring any driver modifications.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220411134532.13538-3-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently all of the quirked systems use the same card and so the
DMI quirk list doesn't contain driver data.
Add driver data to these quirks and then check the data was present
or not. This will allow potentially setting quirks for systems with
faulty firmware that claims to have a DMIC but doesn't really.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220411134532.13538-2-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Jiaxin Yu <jiaxin.yu@mediatek.com>:
The series reuses mt8192-mt6359-rt1015-rt5682.c for supporting machine
driver with rt1015p speaker amplifier and rt5682s headset codec.
