Several of the wm_adsp kunit tests failed by only on arm64. This
turns out to be passing things to release_firmware which were not
allocated with request_firmware. This does actually drop some
errors on other platforms but somehow doesn't cause the tests to
fail, and kunit hides a lot of the output for passing tests.
There is a comment in the code regarding this exact thing in
wm_adsp_fw_find_test_case_exit(), but then it goes on and
does it anyway. I suspect maybe there was a plan to override
wm_adsp_release_firmware_files() that got forgotten, as the
function appears to have hooks for kunit that aren't used. Anyway
for now implement a simple fix of freeing the filenames
locally. It is likely a more detailed fix will be implemented in
the near future but this should get things moving again.
Fixes: bf2d44d07d ("ASoC: wm_adsp: Add kunit test for firmware file search")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260318103813.249190-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously, this driver only advertised support for 48 kHz and
96 kHz sample rates, as there was no PLL configuration data
specified for any other sample rate/BCLK.
The CS42L84 is an Apple-specific variant of CS42L42. The PLL
configuration parameters for a variety of common BCLKs are
available in the latter's datasheet. What happens if we just
use those? As it turns out, they work just fine.
Fill out more PLL config parameters in the PLL config lookup
table, and advertise the corresponding sample rates to userspace.
This enables 44.1, 88.2, 176.4 and 192 kHz output and input.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260314-cs42l84-rates-v2-1-ea8a5af52542@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax <ckeepax@opensource.cirrus.com> says:
Normally the SDCA jack detection controls will be named after the GE
widget that represents the grouping of everything in the topology
controlled by the jack selection. However, in the case that the jack
selection only controls a single widget the control will be named after
the SU widget that implements that. It is rather confusing to have the
jack detection controls change naming scheme between devices. Add a new
widget type, similar to mixer widgets, to force use of the control name
rather than falling back to the widget names.
Most of the time a GE Entity will control many SU Entities and thus the
generated control will use the control name, since the control is
shared. However, in rare cases the GE Entity will only control a single
SU Entity. In this case the control is only linked to a single SU widget
and will thus inherit the name from that. This leads to the naming for
the Selected Mode control to be unpredictable. Update to use the new
named control muxes to always force the use of the control name.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260303155308.138989-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The WCD934x audio outputs (earpiece, headphone, speaker) share two power
supply converters, a buck and a flyback, managed by reference counters
(buck_users, flyback_users) in the Class-H controller.
The early return in wcd_clsh_ctrl_set_state() when nstate == ctrl->state
prevented _wcd_clsh_ctrl_set_state() from being called when switching
between outputs sharing the same state value. As a result, the buck and
flyback reference counters were never decremented on disable, leaving the
converters active and their counters out of sync with the actual hardware
state.
This caused audible distortion on the earpiece output and spurious MBHC
over-current protection interrupts on HPHL/HPHR during output switching.
Remove the early return so that CLSH_REQ_ENABLE and CLSH_REQ_DISABLE are
always dispatched, keeping the buck and flyback reference counters
consistent on every state transition.
Signed-off-by: Cédric Bellegarde <cedric.bellegarde@adishatz.org>
Link: https://patch.msgid.link/20260304141006.280894-1-cedric.bellegarde@adishatz.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Bard Liao <yung-chuan.liao@linux.intel.com> says:
The index could change if any endpoint is not present. Remove the index
and let the machine driver get the right codec name from the registered
components.
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
Because old pcm_new()/pcm_free() didn't care about parameter component,
to avoid name collisions, we have added pcm_construct()/pcm_destruct() by
commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcm_destruct")
Because all driver switch to new pcm_construct()/pcm_destruct(), old
pcm_new()/pcm_free() were remoted by commit e9067bb502 ("ASoC:
soc-component: remove snd_pcm_ops from component driver")
But naming of pcm_construct()/pcm_destruct() are not goot. re-add
pcm_new()/pcm_free(), and switch to use it, again.
Because it has no functional significance, 1 patch is for 1 vender.
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877brcjyoh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/878qbsjyon.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87a4w8jyot.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87bjgojyoy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87cy14jyp4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87eclkjyp9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87fr60jypf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87h5qgjypk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ikawjypq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87jyvcjypw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ldfsjyq1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ms08jyq8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o6kojyqf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87pl54jyqm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87qzpkjyqt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87sea0jyr1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87tsugjyr8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v7ewjyrf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87wlzcjyrn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87y0jsjyrw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zf48jys3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/871phkldcq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/873420ldcy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/874imgldd6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875x6wldde.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877brclddm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcm_destruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops fromcomponent driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/878qbslddx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because old pcm_new()/pcm_free() didn't care about parameter component,
to avoid name collisions, we have added pcm_construct()/pcm_destruct() by
commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcm_destruct")
Because all driver switch to new pcm_construct()/pcm_destruct(), old
pcm_new()/pcm_free() were remoted by commit e9067bb502 ("ASoC:
soc-component: remove snd_pcm_ops from component driver")
But naming of pcm_construct()/pcm_destruct() are not goot. re-add
pcm_new()/pcm_free(), and switch to use it, again.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87a4w8lde4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the Arizona driver to use GPIO descriptors
exclusively, deletes the legacy code path an updates the
in-tree user of legacy GPIO.
The GPIO lines for mic detect polarity and headphone ID
detection are made exclusively descriptor-oriented. The
headphone ID detection could actually only be used by
the legacy GPIO code, but I converted it to use a
descriptor if someone would actually need it so we don't
just drop useful code.
The compatible "wlf,hpdet-id-gpio" is not in the device
tree bindings and only intended to be used by software
nodes if any. If someone insists I can try to add a
binding for it, but I doubt there is any real user so
it seems pointless.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314-asoc-arizona-v1-1-ecc9a165307c@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
James Calligeros <jcalligeros99@gmail.com> says:
This series introduces some infrastructure to allow platform drivers
to specify what a DAI should be doing when it is not active on the
bus. The primary use case for this is configuring bus keepers which
may be integrated into various codecs. The instigating use case for
this functionality is an interesting bus topology on Apple Silicon
laptops with multiple codecs.
Most Apple Silicon laptops have six codecs split into groups of
three, driving a pair of dual opposed woofers and a tweeter for
L/R stereo sound. These codecs report the voltage and current across
their connected voice coils back to the SoC via the SDOUT pin,
represented as PCM data sent via configurable TDM slots. This data is
used in conjunction with the connected speaker's Thiele/Small Parameters
to ensure that the speaker is not being driven to levels that would
permanently damage them. This is integrated into CoreAudio on macOS.
speakersafetyd[1] handles this for Linux.
All of the codec SDOUT pins are attached to a single receiver port
on the SoC's I2S peripheral, however are split across two physical
data lines (one each for the left and right codec groups). The receiver
has an OR gate in front of it, which is used to sum the two lines.
If at any point a codec is trying to transmit data, and the "opposite"
line ends up floating high, the transmitting codec's data will be
corrupted. We need to guarantee that the idle line stays idle.
In the downstream Asahi Linux kernel[2], we set up one codec in each
group to zero-fill or pull down its line while a codec on the opposite
line is actively transmitting. This is done entirely in the codec
driver, however this approach is over-fit for this one use case. This
sort of functionality may also be of use for other hardware, so following
previous mailing list discussions[3], I have tried to expose the
functionality in a more configurable and generic way.
I have integrated this approach into our downstream platform driver
and select Devicetrees as an example of how this mechanism is intended
to be used[4].
[1] https://github.com/AsahiLinux/speakersafetyd
[2] https://github.com/AsahiLinux/linux/tree/bits/070-audio
[3] https://lore.kernel.org/asahi/20250227-apple-codec-changes-v3-17-cbb130030acf@gmail.com/
[4] https://github.com/chadmed/tree/tdm-revised2
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-0-c6ac5351489a@gmail.com
TAS2770 includes a bus keeper which can be used to control the behaviour
of the SDOUT pin during specified TDM slots. The chip can either pull
the pin to ground, actively transmit zeroes, or keep the pin floating
(default/uninitialised behaviour).
Expose the bus keeper via the set_tdm_idle DAI op so that it can be
configured by consumers.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-7-c6ac5351489a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TAS2764, and the Apple-exclusive variant SN012776, include bus keepers
on the SDOUT pin that can be configured to alter the behaviour of the
SDOUT pin during specified TDM slots. The chip can either leave the
bus floating (default/uninitialised behaviour) or fill the specified
slots with zeroes.
Expose the SDOUT bus keeper and allow it to be configured using the
set_tdm_idle DAI op. The mask must be cropped to only cover slots
valid for the configured BCLK ratio, so introduce a set_bclk_ratio
op that properly configures this.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-6-c6ac5351489a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some audio devices, like certain Texas Instruments codecs, integrate
configurable bus keepers that dictate the codec's behaviour during
idle TDM slots. Now that we have definitions for various idle modes,
add a snd_soc_dai_set_tdm_idle() operation to control this in a
standardised way.
This is useful on Apple Silicon laptops, where a single I2S bus is
comprised of two physical lines which are ORed just before the
receiving port. When a codec on one line is transmitting, we must
guarantee that the other line is low. We can achieve this by
configuring one codec on each line to use its bus keeper to fill
its line with zeroes during the active slots of the other line.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-5-c6ac5351489a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some audio devices, such as certain Texas Instruments codecs,
include configurable bus keepers. We currently don't have
a standardised way to configure such hardware, and instead
rely on the hardware initialising setting itself up into a
sane state. There are situations where this is insufficient,
however, and some platforms require more concrete guarantees
as to the state of the bus, and being able to explicitly
configure bus keepers enables this.
For example, some Apple Silicon machines have an odd bus topology where
the SDOUT pins of all codecs are split across two data lines, which
are summed via an OR gate in front of the receiving port on the
SoC's I2S peripheral. Each line must transmit 0 while a codec
on the other line is actively transmitting data, or the SoC
will receive garbage data. To do this, one codec on each line
must be configured to transmit zeroes during the other line's
active TDM slots.
Thus, we define seven possible bus-keeping modes that a device can
be in: NONE (UB/as initialised), OFF (explicitly disabled), ZERO
(actively transmit a 0), PULLDOWN, HIZ (floating), PULLUP, and
DRIVE_HIGH.
These will be consumed by CODEC/CPU drivers via a common DAI
op, enabling the explicit configuration of bus keepers where
required.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-4-c6ac5351489a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add properties to describe TDM slot idle behaviour. These properties can
be used to describe how a DAI is supposed to behave when not active.
For example, Apple Silicon laptops split a single I2S bus between two
physical lines which are combined at an OR gate in front of the
receiving port. One codec on each line is expected to transmit zeroes
during the active TDM slots of the opposite line, or we will have corrupted
data at the receiver.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-3-c6ac5351489a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
