snd_gus_use_dec(), snd_gus_use_inc() and snd_gf1_print_voice_registers()
last uses were removed in 2007 by
commit e5723b41ab ("[ALSA] Remove sequencer instrument layer")
Remove them.
While there, remove big #if 0 blocks next to the code being deleted.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250508000225.195766-1-linux@treblig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hdac_stream_get_spbmaxfifo() was originally added in 2015
in commit ee8bc4df1b ("ALSA: hdac: Add support to enable SPIB for hdac
ext stream")
when it was originally called snd_hdac_ext_stream_set_spbmaxfifo,
it was renamed snd_hdac_ext_stream_get_spbmaxfifo shortly after
and was finally renamed to snd_hdac_stream_get_spbmaxfifo in 2022.
But it was never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250505011037.340592-1-linux@treblig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The crc8 function is used by the common fmwlib module, so this has
to be selected directly to avoid a link failure:
ERROR: modpost: "crc8" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!
Fixes: 9fa6a693ad ("ALSA: hda/tas2781: Remove tas2781_spi_fwlib.c and leverage SND_SOC_TAS2781_FMWLIB")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250505052303.1812002-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most codes in tas2781_spi_fwlib.c are same as tas2781-fmwlib.c, mainly for
firmware parsing, only differece is the register reading, bit update and
book switching in i2c and spi. The main purpose of this patch is for code
cleaup and arrange the shared part for i2c and spi.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250429111055.567-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Change the Kconfig dependency on ACPI || COMPILE_TEST to only depend on
ACPI.
The alternate dependency on COMPILE_TEST was a fudge to enable building
KUnit tests for modules that are selected by the CS35L56 driver but don't
depend on ACPI. This was based on a misunderstanding that KUNIT_ALL_TESTS
meant "all tests". Actually KUNIT_ALL_TESTS only means "tests for modules
that have satisfied dependencies" so it shouldn't be overriding
dependencies.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250428094126.125781-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The korg1212 driver has an overly complex code with the timer API to
check the pending stop operation and to sync at the prepare stage.
This very same thing can be achieved more simply by the PCM sync_stop
ops without timer, and this patch implements it.
Along with the rewrite to sync_stop ops, the flag
dsp_stop_is_processed is replaced with dsp_stop_processing to indicate
the stop operation is pending, not to indicate it's finished. In that
way, wait_for_event() can be used more straightforwardly.
Link: https://lore.kernel.org/590769506CF46967+20250414042629.63019-5-wangyuli@uniontech.com
Link: https://patch.msgid.link/20250415155522.7998-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Delete the hda_cs_dsp module and move the one array and one function
that is used by the cs35l41_hda driver into that driver.
The cs35l41 and cs35l56 drivers stopped creating ALSA controls to
wrap firmware controls. The reasons are explained in:
commit 312c04cee4 ("ALSA: hda: cs35l41: Stop creating ALSA Controls
for firmware coefficients")
and
commit 34e1b1bb73 ("ALSA: hda: cs35l56: Stop creating ALSA controls
for firmware coefficients")
The cs35l56_hda driver now doesn't use hda_cs_dsp_ctl at all. The
cs35l41_hda driver only uses the small array of firmware names and the
function to read a control value. All other functions and data in
hda_cs_dsp_ctl are unused. There is no need to keep a separate module
for such a small amount of data and code that is only used by one driver,
so remove the whole module.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250424181214.66759-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
In addition, the request function's name parameter should describe the
driver, not the device.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250423075346.45907-17-phasta@kernel.org
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Pass the driver's name as the name parameter of
pcim_request_all_regions().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250423075346.45907-16-phasta@kernel.org
Pioneer DJ DJM-V10 is a high end mixer that acts like a USB sound card.
The MIDI controller part is standard but the PCM part is "vendor specific".
Input and output is enabled by this patch:
- 12 channels (6 stereo) in each direction
- 44 100 / 48 000 / 96 000 Hz
- S24_3LE
Capture channels can be configured through alsamixer.
Playback channels are fixed and controlled by hardware knobs on the mixer.
Signed-off-by: František Kučera <franta-linux@frantovo.cz>
Link: https://patch.msgid.link/20250421155953.4440-1-konference@frantovo.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_lib_malloc_pages() is commonly used for allocating buffers during
the hw_params callback, whereas preallocating buffers goes through
preallocate_pcm_pages().
Having the same terminology in the failure debug messages in both
misleads developers.
Change the debug message in snd_pcm_lib_malloc_pages() to use the
term "allocate" to match its intended use.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250421085244.377228-1-wenst@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace the old direct use of platform_device APIs with newer KUnit APIs
and the faux bus.
The dummy codec driver device doesn't need to be a platform device.
It can be a faux bus device.
The dummy GPIO driver still must be a platform_device so that a
software_node can be added to it before it probes. But use the new
KUnit-managed APIs to create the platform_device and platform_driver.
These will cleanup automatically when a test completes or fails.
Also use KUnit resource cleanup to destroy the faux bus driver and the GPIO
software node instead of doing this "manually" in test exit() functions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250415105414.471039-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
