irq_to_gpio() is legacy and unused API, remove it for good.
This leaves gpio_to_irq() as it's used yet in many places.
Nevertheless, removal of its counterpart is a good signal
to whoever even trying to consider using them that do not.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This change allows the GPIO core to read/change multiple pins in a
single driver call and subsequent I2C transfer. It helps a lot with
PCF857x devices, since their I2C protocol always reads/changes all
existing pins anyway. Therefore, when the GPIO client code does a bulk
operation on multiple pins, the driver makes a single I2C transfer.
Signed-off-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cosmetic change only to improve the coding style. No functional change,
since 'unsigned' and 'unsigned int' are identical as far as the compiler
is concerned.
Signed-off-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Now that the regmap can be queried whether it might sleep, we can get
rid of the conservative setting "can_sleep = true". New drivers which
want to use gpio-regmap and can access the registers memory-mapped won't
have the restriction that their consumers have to use the
gpiod_*cansleep() variants anymore.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
By convention platform_data refers to structures passed to drivers by
code that registers devices. When talking about model-specific data
structures associated with OF compatibles, we usually call them chip_data.
In order to avoid confusion rename all mentions of platform_data to
chip_data.
Fixes: fbb19fe17e ("gpio: pca9570: add slg7xl45106 support")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Convert the Fujitsu MB86S7x GPIO binding to DT schema format.
The "socionext,synquacer-gpio" compatible was not documented, but is
compatible with "fujitsu,mb86s70-gpio" and is in use (in u-boot
Synquacer dts).
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. The gpio-mm module is migrated to the new i8255
library interface leveraging the gpio-regmap API.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. The 104-dio-48e module is migrated to the new
i8255 library interface leveraging the gpio-regmap API.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
By leveraging the gpio-regmap API, the i8255 library is reduced to
simply a devm_i8255_regmap_register() function, a configuration
structure struct i8255_regmap_config, and a helper macro
i8255_volatile_regmap_range() provided to simplify volatile PPI register
hinting for the regmap.
Legacy functions and code will be removed once all consumers have
migrated to the new i8255 library interface.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. Despite the underlying interface being based on
i8255, it is simpler to use the gpio-regmap API directly because the
104-IDI-48 device features only input signals. Therefore, the dependence
on the i8255 GPIO library is removed in this patch.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
For the 104-idi-48, we get an IRQ register with some status information
and basic masking, but it's broken down by banks rather than individual
GPIO. There are six banks (8 GPIO lines each) that correspond to the
lower six bits of the IRQ register (bits 0-5):
Base Address + 7 (Read): IRQ Status Register/IRQ Clear
Bit 0-5: Respective Bank IRQ Statuses
Bit 6: IRQ Status (Active Low)
Bit 7: IRQ Enable Status
Base Address + 7 (Write): IRQ Enable/Disable
Bit 0-5: Respective Bank IRQ Enable/Disable
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
For the 104-dio-48e we have the following IRQ registers (0xB and 0xF):
Base Address +B (Write): Enable Interrupt
Base Address +B (Read): Disable Interrupt
Base Address +F (Read/Write): Clear Interrupt
Any write to 0xB will enable interrupts, while any read will disable
interrupts. Interrupts are cleared by a write to 0xF. There's no IRQ
status register, so software has to assume that if an interrupt is
raised then it was for the 104-DIO-48E device.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
If you only have reg_dat_base set, then it is input-only; if you only
have reg_set_base set, then it is output-only. Thus, we can always set
gpio_chip get_direction to gpio_regmap_get_direction and return
GPIO_LINE_DIRECTION_IN/GPIO_LINE_DIRECTION_OUT given the respective
register base addresses configuration.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
First of all, PCAL953X_OUT_CONF is not used in the driver.
Second, it's not a per-bank register, it's a single for the
chip and should be handled differently anyway.
To avoid confusion, drop PCAL953X_OUT_CONF from pcal6534_recalc_addr().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The pcal6534_check_register() is a bit too verbose.
Clean up it, by deduplicating some operations and
switching to the modulo operation as on some architectures
/ and % can become a single assembly instruction.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The current code logic make the condition "else if (reg >= 0x54)"
can't be true, cause the dead code. So fix it to match the coder
expectation. This is reported by Coverity.
Fixes: 13c5d4ce80 ("gpio: pca953x: Add support for PCAL6534")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use the irq_domain_alloc_irqs() wrapper instead of the full
__irq_domain_alloc_irqs() interface, which was only intended for some
legacy (x86) use cases.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Pull irq fix from Borislav Petkov:
- Cleanup the firmware node for the new IRQ MSI domain properly, to
avoid leaking memory
* tag 'irq_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Free the fwnode created by msi_create_device_irq_domain()
Pull x86 fixes from Borislav Petkov:
- Start checking for -mindirect-branch-cs-prefix clang support too now
that LLVM 16 will support it
- Fix a NULL ptr deref when suspending with Xen PV
- Have a SEV-SNP guest check explicitly for features enabled by the
hypervisor and fail gracefully if some are unsupported by the guest
instead of failing in a non-obvious and hard-to-debug way
- Fix a MSI descriptor leakage under Xen
- Mark Xen's MSI domain as supporting MSI-X
- Prevent legacy PIC interrupts from being resent in software by
marking them level triggered, as they should be, which lead to a NULL
ptr deref
* tag 'x86_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Move '-mindirect-branch-cs-prefix' out of GCC-only block
acpi: Fix suspend with Xen PV
x86/sev: Add SEV-SNP guest feature negotiation support
x86/pci/xen: Fixup fallout from the PCI/MSI overhaul
x86/pci/xen: Set MSI_FLAG_PCI_MSIX support in Xen MSI domain
x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL
Pull input fixes from Dmitry Torokhov:
- touchpads on HP 15-* laptops switched back to PS/2 emulation mode
- a quirk for Clevo PCX0DX/TUXEDO XP1511 to make sure keyboard is
responding after resume
* tag 'input-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add Clevo PCX0DX to i8042 quirk table
Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"
Pull cxl fixes from Dan Williams:
"A couple of fixes for bugs introduced during the merge window. One is
a regression, the other was a bug in the CXL AER handler:
- Fix a crash regression due to module load order of cxl_pmem.ko
- Fix wrong register offset read in CXL AER handling path"
* tag 'cxl-fixes-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/pmem: Fix nvdimm unregistration when cxl_pmem driver is absent
cxl: fix cxl_report_and_clear() RAS UE addr mis-assignment
This reverts commit 7efc3b7261.
We have got openSUSE reports (Link 1) for 6.1 kernel with khugepaged
stalling CPU for long periods of time. Investigation of tracepoint data
shows that compaction is stuck in repeating fast_find_migrateblock()
based migrate page isolation, and then fails to migrate all isolated
pages.
Commit 7efc3b7261 ("mm/compaction: fix set skip in fast_find_migrateblock")
was suspected as it was merged in 6.1 and in theory can indeed remove a
termination condition for fast_find_migrateblock() under certain
conditions, as it removes a place that always marks a scanned pageblock
from being re-scanned. There are other such places, but those can be
skipped under certain conditions, which seems to match the tracepoint
data.
Testing of revert also appears to have resolved the issue, thus revert
the commit until a more robust solution for the original problem is
developed.
It's also likely this will fix qemu stalls with 6.1 kernel reported in
Link 2, but that is not yet confirmed.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1206848
Link: https://lore.kernel.org/kvm/b8017e09-f336-3035-8344-c549086c2340@kernel.org/
Link: https://lore.kernel.org/lkml/20230125134434.18017-1-mgorman@techsingularity.net/
Fixes: 7efc3b7261 ("mm/compaction: fix set skip in fast_find_migrateblock")
Cc: <stable@vger.kernel.org>
Tested-by: Pedro Falcato <pedro.falcato@gmail.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe found another DT file that shouldn't be executable, and that
frustrated me enough that I went hunting with this script:
git ls-files -s |
grep '^100755' |
cut -f2 |
xargs grep -L '^#!'
and that found another file that shouldn't have been marked executable
either, despite being in the scripts directory.
Maybe these two are the last ones at least for now. But I'm sure we'll
be back in a few years, fixing things up again.
Fixes: 8c6789f4e2 ("ASoC: dt-bindings: Add Everest ES8326 audio CODEC")
Fixes: 4d8e5cd233 ("locking/atomics: Fix scripts/atomic/ script permissions")
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ksmbd server fixes from Steve French:
"Four smb3 server fixes, all also for stable:
- fix for signing bug
- fix to more strictly check packet length
- add a max connections parm to limit simultaneous connections
- fix error message flood that can occur with newer Samba xattr
format"
* tag '6.2-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: downgrade ndr version error message to debug
ksmbd: limit pdu length size according to connection status
ksmbd: do not sign response to session request for guest login
ksmbd: add max connections parameter
Pull cifs fix from Steve French:
"Fix for reconnect oops in smbdirect (RDMA), also is marked for stable"
* tag '6.2-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix oops due to uncleared server->smbd_conn in reconnect
Pull io_uring fixes from Jens Axboe:
"Two small fixes for this release:
- Sanitize how async prep is done for drain requests, so we ensure
that it always gets done (Dylan)
- A ring provided buffer recycling fix for multishot receive (me)"
* tag 'io_uring-6.2-2023-01-27' of git://git.kernel.dk/linux:
io_uring: always prep_async for drain requests
io_uring/net: cache provided buffer group value for multishot receives
Pull tracing fixes from Steven Rostedt:
- Fix filter memory leak by calling ftrace_free_filter()
- Initialize trace_printk() earlier so that ftrace_dump_on_oops shows
data on early crashes.
- Update the outdated instructions in scripts/tracing/ftrace-bisect.sh
- Add lockdep_is_held() to fix lockdep warning
- Add allocation failure check in create_hist_field()
- Don't initialize pointer that gets set right away in enabled_monitors_write()
- Update MAINTAINER entries
- Fix help messages in Kconfigs
- Fix kernel-doc header for update_preds()
* tag 'trace-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Update MAINTAINERS file to add tree and mailing list
rv: remove redundant initialization of pointer ptr
ftrace: Maintain samples/ftrace
tracing/filter: fix kernel-doc warnings
lib: Kconfig: fix spellos
trace_events_hist: add check for return value of 'create_hist_field'
tracing/osnoise: Use built-in RCU list checking
tracing: Kconfig: Fix spelling/grammar/punctuation
ftrace/scripts: Update the instructions for ftrace-bisect.sh
tracing: Make sure trace_printk() can output as soon as it can be used
ftrace: Export ftrace_free_filter() to modules
Pull i2c fixes from Wolfram Sang:
"A bunch of driver fixes with a tiny bit of new IDs"
* tag 'i2c-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rk3x: fix a bunch of kernel-doc warnings
i2c: axxia: use 'struct' for kernel-doc notation
dt-bindings: i2c: renesas,rzv2m: Fix SoC specific string
i2c: mxs: suppress probe-deferral error message
i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
i2c: designware: Fix unbalanced suspended flag
i2c: designware: use casting of u64 in clock multiplication to avoid overflow
Pull gpio fixes from Bartosz Golaszewski:
- fix the -c option in the gpio-event-mode user-space example program
- fix the irq number translation in gpio-ep93xx and make its irqchip
immutable
- add a missing spin_unlock in error path in gpio-mxc
- fix a suspend breakage on System76 and Lenovo Gen2a introduced in
GPIO ACPI
* tag 'gpio-fixes-for-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
tools: gpio: fix -c option of gpio-event-mon
gpio: ep93xx: remove unused variable
gpio: ep93xx: Make irqchip immutable
gpio: ep93xx: Fix port F hwirq numbers in handler
gpio: mxc: Unlock on error path in mxc_flip_edge()
gpiolib-acpi: Don't set GPIOs for wakeup in S3 mode
Pull regulator fix from Mark Brown:
"A fix for the DT binding documentation which dropped a property when
being converted to YAML format causing spurious errors validating
device trees for platforms using the device"
* tag 'regulator-fix-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: samsung,s2mps14: add lost samsung,ext-control-gpios
