tmp401 is missing HWMON_C_REGISTER_TZ. So a devicetree thermal
zone referencing a such sensor ('thermal-sensors = <&tmp411 N>')
fails to register it. Then its cooling-maps is not set, which means
that the fans are not managed.
Same as lm90 or jc42, set HWMON_C_REGISTER_TZ.
Boards without the property into the DT keep the same behavior.
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Link: https://lore.kernel.org/r/20260713-for-upstream-hwmon-tmp401-register-tz-v1-1-47315d8617bc@free.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add the Lenovo LOQ 15IAX9 product family to the yogafan dmi_system_id
table. Unlike the Legion series, ACPI table extraction reveals this LOQ
utilizes an 8-bit EC architecture with a 100x multiplier, but maintains
a dual-fan setup via the \_SB.PC00.LPCB.EC0.FA1S and FA2S paths.
A new loq_15iax9_8bit_dual_cfg structure was added to properly map these
hardware registers and calculate RPMs correctly while avoiding path
conflicts with AMD-based LOQ variants.
Signed-off-by: Sarbajit Sarkar <sarbajitsarkar16108@gmail.com>
Link: https://lore.kernel.org/r/20260709183500.13761-1-sarbajitsarkar16108@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver populates acpi_device_name() and acpi_device_class() that are
never read afterward, so make it stop doing that and drop the symbols
defined for this purpose.
Since ACPI_POWER_METER_CLASS is also used for generating ACPI netlink
events, use the "pwr_meter_resource" string literal directly instead of
it for that.
No intentional functional impact.
This will facilitate the removal of device_name and device_class from
struct acpi_device_pnp in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/2297496.irdbgypaU6@rafael.j.wysocki
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ChromeOS EC APIs use integers representing degrees kelvin for
temperatures. The default conversions from linux/units.h will then
always convert these integer degrees celsius with a 150 millidegree
offset. This is a bit confusing, as it also differs from other CrOS EC
tooling. Internally the EC uses a kelvin to celsius offset of a round
273, so the current conversion is also not entirely accurate.
Implement a custom conversion which preserves round values.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20260630-cros_ec-hwmon-overflow-v1-1-3d2ecd3eb0f2@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a driver for the temperature and voltage sensors on PolarFire SoC.
The temperature reports how hot the die is, and the voltages are the
SoC's 1.05, 1.8 and 2.5 volt rails respectively.
The hardware supports alarms in theory, but there is an erratum that
prevents clearing them once triggered, so no support is added for them.
The hardware measures voltage with 16 bits, of which 1 is a sign bit and
the remainder holds the voltage as a fixed point integer value. It's
improbable that the hardware will work if the voltages are negative, so
the driver ignores the sign bits.
There's no dt support etc here because this is the child of a simple-mfd
syscon.
Signed-off-by: Lars Randers <lranders@mail.dk>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260629-wriggle-headscarf-c85a4070dddb@spud
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for ROHM BD12790 hot-swap controller which is largely
similar to Analog Devices adm1272.
The BD12790 uses the same selectable 60V/100V voltage ranges and
15mV/30mV current-sense ranges as the ADM1272, and the same VRANGE
(bit 5) and IRANGE (bit 0) layout in PMON_CONFIG. It therefore uses
a dedicated coefficient table that mirrors adm1272_coefficients, with
the following differences derived from BD12790 datasheet Table 1 (p.18):
- power 60V/30mV: m=17560 (vs. 17561)
- power 100V/30mV: m=10536 (vs. 10535)
- temperature: b=31880 (vs. 31871, reflecting T[11:0] = 4.2*T + 3188)
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Assisted-by: GitHub Copilot:claude-sonnet-4.6
Link: https://lore.kernel.org/r/b209c1b47712b69f17b52cfd7a7a38ed76024ca7.1782458224.git.mazziesaccount@gmail.com
[groeck: Fixed comment describing BD12790 coefficients]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ROHM BD12780 and BD12780A are hot-swap controllers. They are largely
similar to Analog Devices ADM1278. Besides the ID registers and some
added functionality, the BD12780 and BD12780A mark PMON_CONFIG bits
[15:14] as reserved. Hence TSFILT setting must be omitted on these ICs.
The BD12780 has 3 pins usable for configuring the I2C address. The
BD12780A lists the ADDR3-pin as "not connect".
Support ROHM BD12780 and BD12780A controllers.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/e1e6e6218c08b562311356ef9c57378d32c26b08.1782458224.git.mazziesaccount@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Populating the i2c_device_id -table is not enough to make the
driver module automatically load when device-tree node for the
power-monitor is parsed at boot.
Adding the of_device_id tables causes the driver module to be
automatically load at boot. Testing has been done with rather old Debian
system.
When inspecting the generated module-aliases with the insmod, following
entries seem to be the difference:
alias: of:N*T*Cadi,adm1075C*
alias: of:N*T*Cadi,adm1075
I suspect these are required for the module loading to work.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/9eca6831f9fe2d781bb88337397c39b10e36f5c6.1782458224.git.mazziesaccount@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the 'ti,current-range' devicetree property to configure
the current limit via the DEVICE_SETUP (0xD9) register, overriding the
physical CL pin setting.
This configuration is supported on all chips in this driver (LM25066,
LM5064, LM5066, LM5066i) except LM25056.
The property values "low" and "high" map to:
- LM25066: low = 25 mV, high = 46 mV
- LM5064, LM5066, LM5066i: low = 26 mV, high = 50 mV
The Bit 4 mapping to High/Low current limit is handled dynamically on
probe because it is swapped for LM25066 compared to the other supported
chips.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Link: https://lore.kernel.org/r/20260615-lm25066-cl-config-v3-2-decb4f5b0b77@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a 'ti,current-range' string property to configure the device's Current
Limit (CL) behavior to "high" or "low" via the register, overriding the
physical CL pin setting.
This configuration is supported on LM25066, LM5064, LM5066, and LM5066i.
LM25056 is excluded because it does not support configuring the current
limit via the DEVICE_SETUP register (bit 2 of DEVICE_SETUP is reserved).
The values "low" and "high" map to the respective low/high threshold
voltages of the chips:
- LM25066: low = 25 mV, high = 46 mV
- LM5064, LM5066, LM5066i: low = 26 mV, high = 50 mV
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260615-lm25066-cl-config-v3-1-decb4f5b0b77@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add PMBus hwmon support for the Silergy SQ24860 eFuse.
The driver reports input voltage, output voltage, auxiliary voltage,
input current, input power, and temperature. It also exposes peak,
average, and minimum history attributes, sample count configuration,
and maps the manufacturer-specific VIREF register to the generic input
over-current fault limit attribute.
The IMON resistor value is read from the silergy,rimon-micro-ohms device
property and used to configure the input current calibration gain.
Signed-off-by: Ziming Zhu <ziming.zhu@silergycorp.com>
Link: https://lore.kernel.org/r/20260612030304.5165-3-zmzhu0630@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Pull tracing fixes from Steven Rostedt:
- Fix use-after-free in eventfs_remove_rec()
The freeing of the eventfs_inode children used list_for_each_entry()
where the child is freed via srcu, but there's still a chance that it
gets freed. It should be using list_for_each_entry_safe().
- Fix eventfs_inode SRCU use of list in freeing
The iterator uses an SRCU protected list walk on the eventfs inodes.
The eventfs inode uses its "list" field in a union with the RCU list
head. When the inode gets added to the SRCU list it immediately
corrupts the list pointer and can cause an issue with the iterator.
Move the RCU list head to be shared with the children list head which
allows the iterator to check the parent inode if is freed before
referencing the child. Have the iterator check the parent "is_freed"
field and break out if it is set. Also add memory barriers to make
sure the ordering is correct.
- Fix various RCU synchronization issues with direct_functions
Updates to direct_functions have some missing RCU protection and
synchronization. Restructure the code a bit to make sure updates to
the direct_functions are protected.
- Remove an unneeded comma from a scope_guard()
There's a spurious comma in a scope_guard(). Remove it.
- Fix race in per CPU buffer swap in the ring buffer
When a per CPU buffer swap happens, it must make sure that it doesn't
occur while a writer is active. Instead it returns an -EBUSY. But
there's a small race window when a writer moves from one sub-buffer
to the next that it resets the "committing" counter. If a swap
happens at that moment, the buffer used for the commit of an event
will not match the buffer the event is actually on. Instead of using
the "committing" counter, use the recursive detection counter that
does not get reset when the writer crosses sub-buffers.
- Fix off-by-one in ftrace_free_mem()
The function ftrace_free_mem() gets an "end_ptr" as a parameter that
is exclusive to the rang to be freed. But its value is used to search
for the records that expects an inclusive value. Subtract one from
the parameter to convert it to an inclusive range.
- Disable resizing of the ring buffer for persistent buffers
Resizing the persistent buffer has undefined behavior. Prevent it
from being resized.
- Disable changing ring buffer subbuf order when resizing is disabled
The ring buffer subbuffer order can not be changed during resizing.
Use that instead of just checking if the buffer is mapped as mapped
buffers also have resizing disabled.
- Initialize subbuf_order of reader pages when they are created
In rb_allocate_cpu_buffer() the bpage->order is not updated to the
current subbuf_order leaving it as zero. This value is used when the
page is freed.
- Fix test_ringbuffer() to test for ERR_PTR before calling
kthread_stop()
The rb_threads[] array is assigned the output of kthread_run_on_cpu()
which could return an ERR_PTR. At the end of the test, all threads in
the array are cleaned up by kthread_stop() passing in the value in
the array if it isn't zero. But if the array contains an ERR_PTR,
kthread_stop() will not be able to handle it properly.
* tag 'trace-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Fix crash passing ERR_PTR to kthread_stop()
ring-buffer: Initialise reader page order in rb_allocate_cpu_buffer()
ring-buffer: Prevent subbuf order change when resizing is disabled
ring-buffer: Prevent resizing of persistent ring buffer
ftrace: Fix off-by-one fentry site disable in ftrace_free_mem()
ring-buffer: Use current_context for safe per-CPU buffer swap
ftrace: Drop extra comma in trace_buffered_event_enable
ftrace: Protect direct_functions in update_ftrace_direct_mod
ftrace: Protect direct_functions in update_ftrace_direct_del
ftrace: Protect direct_functions in ftrace_find_rec_direct
eventfs: Use children field for rcu head and add memory barriers
eventfs: Fix use-after-free in eventfs_remove_rec()
Pull s390 fixes from Vasily Gorbik:
- Fix potential uninitialized memory reads and buffer overflows from
malformed zcrypt CCA and EP11 requests by properly validating lengths
and payloads
- Fix possible out of bounds accesses in zcrypt EP11 domain handling by
replacing fixed payload layout assumptions with parsing ASN.1 fields
with bounds checks
- Fix zcrypt CCA and EP11 request and reply buffer allocations missing
required 4-byte padding, and scrub the full allocation on release
- Fix zcrypt CCA and EP11 messages leaking up to 3 uninitialized bytes
of memory by zeroing trailing alignment padding
* tag 's390-7.2-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Pad trailing CCA or EP11 message with zeros
s390/zcrypt: Improve EP11 CPRB domain handling with ASN.1 parsing
s390/zcrypt: Improve EP11 CPRB length and overflow checks
s390/zcrypt: Improve CCA CPRB length and overflow checks
s390/zcrypt: Fix CPRB memory allocation in zcrypt misc code
In test_ringbuffer()'s out_free cleanup loop, the check
`!rb_threads[cpu]` only catches NULL entries and misses entries that
hold an ERR_PTR.
rb_threads[] is static, so unassigned slots are NULL. But when
kthread_run_on_cpu() fails for a cpu, it stores ERR_PTR(-ENOMEM) (or
-EINTR) in rb_threads[cpu] before the creation loop jumps to out_free.
That entry is non-NULL, so the old `!ptr` check does not break, and the
cleanup proceeds to call kthread_stop() on the ERR_PTR. kthread_stop()
then dereferences the bogus pointer, crashing the kernel during the
late_initcall self-test.
crash logs:
BUG: kernel NULL pointer dereference, address: 000000000000001c
Oops: 0002 [#1] SMP NOPTI
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 7.2.0-rc6-dirty #7 PREEMPT(lazy)
RIP: 0010:kthread_stop+0x2e/0x220
RBX: fffffffffffffff4
CR2: 000000000000001c
Call Trace:
<TASK>
test_ringbuffer+0x1ec/0x650
do_one_initcall+0x6c/0x2c0
kernel_init_freeable+0x21d/0x420
kernel_init+0x15/0x1c0
ret_from_fork+0x21b/0x320
</TASK>
Kernel panic - not syncing: Fatal exception
Cc: stable@vger.kernel.org
Fixes: 64ed3a049e ("ring-buffer: make use of the helper function kthread_run_on_cpu()")
Link: https://patch.msgid.link/20260807154145.2846521-2-sh_def@163.com
Signed-off-by: Hui Su <sh_def@163.com>
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a module's init text is freed, do_init_module() calls
ftrace_free_mem() with a half-open [start, end) range. However the
ftrace_cmp_recs() comparator treats the upper bound as inclusive, as all
its other users do, passing 'ip + size - 1'. So ftrace_free_mem() can
delete a record sitting exactly at 'end', which is outside the freed
range.
For a kernel without CFI or IBT, the first record of a function is at
the function start, which for the first function in a module is also the
base of its text allocation. As the module allocator packs its regions,
that address is often the 'end' passed by a neighboring module's
do_init_module(), causing the first function's ftrace location to get
disabled, preventing an attempt to livepatch it:
livepatch: failed to find location for function 'pcspkr_probe'
Convert the exclusive end to the inclusive 'end - 1' the comparator
expects, and return early for an empty range to avoid the subtraction
from underflowing when the init text size is zero.
Cc: stable@vger.kernel.org
Fixes: 42c269c88d ("ftrace: Allow for function tracing to record init functions on boot up")
Link: https://patch.msgid.link/1b5ccfa8095bdb1277f84af1c2c2e2205aca03ae.1785992188.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring_buffer_swap_cpu() function currently checks the per-CPU
committing counter to determine if a buffer is actively being written to
before performing the swap. However, there exists a race window where
this check can be bypassed:
ring_buffer_lock_reserve
cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_a
rb_reserve_next_event
rb_start_commit // inc committing
if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) {...}
__rb_reserve_next
rb_move_tail
rb_end_commit(cpu_buffer); // dec committing => 0
/* interrupt hits here, successfully swaps! */
local_inc(&cpu_buffer->committing);
ring_buffer_unlock_commit
cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_b
rb_commit
rb_end_commit
RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing))
// triggers warning
The committing counter can temporarily drop to 0 during a single write
operation (within rb_move_tail), creating a window where swap can
succeed even though the write is still in progress. This leads to
inconsistent buffer state and triggers the RB_WARN_ON in rb_commit().
Replace the committing counter check with current_context checks, which
are set at the entry of ring_buffer_lock_reserve() and remain valid
throughout the entire write operation, providing a reliable indicator of
buffer busy state during swap.
Cc: stable@vger.kernel.org
Fixes: 4239c38fe0 ("ring-buffer: Process commits whenever moving to a new page.")
Link: https://patch.msgid.link/20260803005640.2445666-2-wutengda@huaweicloud.com
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull x86 fix from Ingo Molnar:
- Fix MCE CMCI discovery initialization ordering bug (Breno Leitao)
* tag 'x86-urgent-2026-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Set up the polling timer before CMCI discovery
Pull futex fix from Ingo Molnar:
- Fix race in futex_pivot_pending() during private hash resize
that can cause stuck tasks (Yao Kai)
* tag 'locking-urgent-2026-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Fix race in futex_pivot_pending() during private hash resize
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 7.2-rc7 that
resolve some reported issues. Included in here are:
- new quirk for some broken USB devices
- thunderbolt device fixes for reported issues
- usb gadget driver fix
- usb atm driver fix
- xhci driver fixes.
- other minor USB driver fixes
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci: use BIT_ULL for CRCR bits to fix incorrect 64bit mask
usb: quirks: Add ShanWan gamepad to quirk list
usb: hub: Split announce_device() to log device identity before enumeration
usb: core: Add quirk for 255-bytes initial config read
usb: atm: cxacru: properly kill rcv_urb on error in cxacru_cm()
usb: misc: usbio: check ibuf_len against rxbuf_len in bulk msg
usb: gadget: f_ncm: Use unsigned int for ndp_index
usb: cdnsp: fix incorrect endian conversions for APB timeout register
thunderbolt: Initialize ->domain_released completion before it is being used
thunderbolt: icm: Preserve USB4 proxy data-valid bit
thunderbolt: Bound the DROM dual link port number before indexing sw->ports
thunderbolt: Fix bandwidth group reservation indexing
thunderbolt: stream: Unmap buffers with mapped size
Pull tty / serial / vt driver fixes from Greg KH:
"Here are some small serial and vt tty driver fixes for 7.2-rc7 that
resolve some reported problems. Included in here are:
- two vt core fixes
- amba-pl011 serial driver fixes
- 8250_of and 8250_dma driver fixes
- qcom-geni serial driver fix
- sc16is7xx serial driver fix
All of these have been in linux-next this week with no reported
issues"
* tag 'tty-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: amba-pl011: synchronize DMA teardown
serial: amba-pl011: cancel RS485 hrtimers after freeing IRQ
serial: amba-pl011: fix indefinite RS485 post-send delay
vt: add permission check for KDSKBMETA ioctl
vt: stabilize tty reference in kbd_keycode with tty_port_tty_get
serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx
serial: qcom-geni: fix TX DMA buffer flush
serial: 8250_dma: Clear stale RX state on shutdown
serial: sc16is7xx: enable THRI before filling TX FIFO
Pull staging driver fixes from Greg KH:
"Here are some more small staging driver fixes, just for the rtl8723bs
driver, for some reported problems found with it now that people are
starting to actually test the thing with "bad" networks.
Nothing major, but good to have in the -final release. All of these
have been in linux-next for over a week with no reported problems"
* tag 'staging-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: validate monitor transmit frame lengths
staging: rtl8723bs: fix missing shared-key auth challenge length check
staging: rtl8723bs: fix OOB read in WMM_param_handler()
staging: rtl8723bs: fix OOB read in rtw_get_wpa_ie()
Pull char / misc and documentation fixes from Greg KH:
"Here are some small char/misc and nvmem and documentation fixes for
7.2-rc7 to resolve some reported issues. Included in here are:
- updates to the documentation for the kernel threat model and
security bugs to get the LLMs to actually follow what we have been
asking them to do (i.e. not claim security issues for things we do
not consider security issues.)
- nvmem driver fixes which required a tiny "layout" driver to be
added.
- fastrpc driver fixes
- mei driver fix
- counter driver fix
- binder driver fix
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
docs: security-bugs: clarify some mandatory steps for AI reports
docs: coding-assistant: explain important steps when looking for bugs
docs: security-bugs: clarify what counts as a valid version
docs: threat-model: move fake devices out of "non production use"
docs: threat-model: clarify "security bug" vs "vulnerability"
counter: microchip-tcb-capture: Fix DT channel validation
mei: pull kvfree out of spinlock
rust_binder: do not query current thread for all ioctls
nvmem: layouts: Add fixed-layout driver
nvmem: apple-spmi-nvmem: wrap regmap calls to satisfy CFI
misc: fastrpc: fix memory leak in fastrpc_channel_ctx_free
misc: fastrpc: fix channel ctx ref leak when session alloc fails
misc: fastrpc: take fl->lock when moving mmaps on interrupted invoke
misc: fastrpc: Remove buffer from list prior to unmap operation
misc: fastrpc: Fix initial memory allocation for Audio PD memory pool
