Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The patchset focuses on debug functionality for the avs-driver.
Two major blocks are covered here: data probing and AudioDSP firmware
logging. Both are configured and controlled through debugfs.
Data probing is a AudioDSP debug functionality which allows for
gathering the actual data that is being routed to or from a module.
Helps in debugging its processing capabilities - navigate to a specific
module which may have caused a glitch within a pipeline (set of modules
bound together).
First few allow for assigning compress stream to a HDAudio stream, what
is currently limited to pcm substreams only. These patches were already
present on this list and reviewed in the past [1].
The next few tidy existing debug-related code up so it's ready for
addition of new functionalities and make it clear which part of the avs
is debug related and which is not. These also simplify the existing
locking around the trace fifo.
Afterward, debug-related IPCs are defined along with stub soc-component
and compress DAI operations. Not much is done there as it's not a
standard PCM streaming scenario. Most code found in compress operations
is inherited from the HOST side of HDAudio streaming found in pcm.c
file of the driver.
Finally, a debugfs file operations are defined. These facilitate
connecting to DSP modules from which the data shall be gathered as well
as control and configuration of firmware logging. Additionally, entries
are added to allow for dumping snapshots of key memory windows.
sof_es8336_remove() calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This
means that the callback function may still be running after
the driver's remove function has finished, which would result
in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.
Fixes: 89cdb224f2 ("ASoC: sof_es8336: reduce pop noise on speaker")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221205143721.3988988-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>:
Fix an issue with starting the ACP DSP and support debug dumps to aid
maintainability.
Define debugfs subdirectory delegated for IPC communication with DSP.
Input format: uint,uint,(...) which are later translated into DWORDS
sequence and further into instances of struct of interest given the IPC
type.
For Extractor probes, following have been enabled:
- PROBE_POINT_ADD (echo <..> probe_points)
- PROBE_POINT_REMOVE (echo <..> probe_points_remove)
- PROBE_POINT_INFO (cat probe_points)
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221202152841.672536-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Data probing is a cAVS firmware functionality that allows for data
extraction and injection directly from or to DMA stream. To support it,
new functions and types are added. These facilitate communication
with the firmware.
Total of eight IPCs:
- probe module initialization and cleanup
- addition and removal of probe points
- addition and removal of injection DMAs
- dumping list of currently connected probe points or enlisted DMAs
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221202152841.672536-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Debug-related fields and log-dumping are useful when debugfs is enabled.
Define them under CONFIG_DEBUG_FS and provide stubs when the config is
disabled so that the code that makes use of these needs not to be
complicated unnecessarily.
Members that are duplicated by this patch will be removed by the follow
up changes.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221202152841.672536-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mark Brown <broonie@kernel.org>:
The recently added pcm-test selftest has pointed out that systems with
the tda998x driver end up advertising that they support capture when in
reality as far as I can see the tda998x devices are transmit only. The
DAIs registered through hdmi-codec are bidirectional, meaning that for
I2S systems when combined with a typical bidrectional CPU DAI the
overall capability of the PCM is bidirectional. In most cases the I2S
links will clock OK but no useful audio will be returned which isn't so
bad but we should still not advertise the useless capability, and some
systems may notice problems for example due to pinmux management.
This is happening due to the hdmi-codec helpers not providing any
mechanism for indicating unidirectional audio so add one and use it in
the tda998x driver. It is likely other hdmi-codec users are also
affected but I don't have those systems to hand.
Mark Brown (2):
ASoC: hdmi-codec: Allow playback and capture to be disabled
drm: tda99x: Don't advertise non-existent capture support
drivers/gpu/drm/i2c/tda998x_drv.c | 2 ++
include/sound/hdmi-codec.h | 4 ++++
sound/soc/codecs/hdmi-codec.c | 30 +++++++++++++++++++++++++-----
3 files changed, 31 insertions(+), 5 deletions(-)
base-commit: f0c4d9fc9c
--
2.30.2
Currently the hdmi-codec driver always registers both playback and capture
capabilities but for most systems there's no actual capture capability,
usually HDMI is transmit only. Provide platform data which allows the users
to indicate what is supported so that we don't end up advertising things
to userspace that we can't actually support.
In order to avoid breaking existing users the flags in platform data are
a bit awkward and specify what should be disabled rather than doing the
perhaps more expected thing and defaulting to not supporting capture.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221130184644.464820-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The OMTP pin define headsets can be mis-detected as line out
instead of OMTP, causing obvious issues with audio quality.
This patch is to put increased resistances within
the device at a suitable point.
To solve this issue better, the new mechanism setup
ground switches with conditional delay control
and these allow for more stabile detection process
to operate as intended. This conditional delay control
will not impact the hardware process
but use extra system resource.
This commit improves control of ground switches in the AAD logic.
Signed-off-by: David Rau <david.rau.zg@renesas.com>
Link: https://lore.kernel.org/r/20221121050744.2278-1-david.rau.zg@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Leftover from recent series [1].
Following changes are proposed for the rt5682 sound card driver:
1) Move jack unassignment from platform_device->remove() to
dai_link->exit(). This is done to make jack init and deinit flows
symmetric
2) Remove platform_device->remove() function
3) Simplify card->suspend_pre() and card->resume_post() by making use of
snd_soc_card_get_codec_dai() helper
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by going to
err_pm instead of err_clk.
Fixes:f086ba9d5389c ("ASoC: pcm512x: Support mastering BCLK/LRCLK using the PLL")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160402.126140-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
For all the boards included in this patchset, a similar set of changes
is proposed:
1) Move jack unassignment from platform_device->remove() to
dai_link->exit(). This is done to make jack init and deinit flows
symmetric
2) Remove platform_device->remove() function
3) Simplify card->suspend_pre() and card->resume_post() by making use of
snd_soc_card_get_codec_dai() helper
While bdw_rt286 board - which is utilized by the catpt-driver - is
definitely not part of "avs", same treatment applies. And thus decided
to make it part of this series instead of sending it separately.
