The YUYV8_1X16 and UYVY8_1X16 formats are treated as 'ITU-R
BT.601/BT.1358 16-bit YCbCr-422 input' (YUV16 - 0x5) in the R-Car VIN
driver and are thus disallowed when capturing frames from the R-Car
CSI-2 interface according to the hardware manual.
As the 1X16 format variants are meant to be used with serial busses they
have to be treated as 'YCbCr-422 8-bit data input' (0x1) when capturing
from CSI-2, which is a valid setting for CSI-2.
Commit 78b3f9d75a ("media: rcar-vin: Add check that input interface
and format are valid") disallowed capturing YUV16 when using the CSI-2
interface. Fix this by using YUV8_BT601 for YCbCr422 when CSI-2 is in
use.
Fixes: 78b3f9d75a ("media: rcar-vin: Add check that input interface and format are valid")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20240617161135.130719-2-jacopo.mondi@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/v4l2-core/v4l2-async.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/v4l2-core/v4l2-fwnode.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Rename 'st-vgxy61' to 'vgxy61', dropping the vendor prefix to follow the
same naming scheme as the vast majority of device drivers.
The device tree binding does not fall into binding rename exceptions and
therefore must not be changed. Keep its legacy name.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
It was reported to me that the imx219 didn't work on one of our
development kits partly because the access sequence is incorrect.
The datasheet I could find [1] for this camera has the access sequence:
Seq. No. Address (Hex) data
1 30EB 05
2 30EB 0C
3 300A FF
4 300B FF
5 30EB 05
6 30EB 09
but the driver swaps the first two elements. Laurent pointed out on IRC
that the original code used the correct sequence for 1920x1080 but the
current sequence for 3280x2464 and 1640x1232. During refactoring of the
init sequence the current order was used for all formats.
Switch to using the documented sequence.
Link: https://www.opensourceinstruments.com/Electronics/Data/IMX219PQ.pdf [1]
Fixes: 8508455961 ("media: i2c: imx219: Split common registers from mode tables")
Fixes: 1283b3b8f8 ("media: i2c: Add driver for Sony IMX219 sensor")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The ov2680 driver has 9 controls now and the call to
v4l2_ctrl_new_fwnode_properties() adds 2 more.
Tell v4l2_ctrl_handler_init() to pre-allocate space for 11
controls to match this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The out of tree IPU6 driver comes with its own copy of the ipu-bridge code.
It also comes bundled with standard v4l2 sensor drivers. Many of these have
been mainlined and the rest is being mainlined but not all are upstream
yet.
The latest version of the out of tree code now will use the mainline kernel
ipu-bridge version when build against new enough kernels.
This however breaks support for (bundled) sensor drivers which do not (yet)
have an entry in the mainline ipu-bridge code.
Add the missing entries to the mainline ipu-bridge code to make
the transition to having everything in mainline easier.
The alternative HID for the OV13B10 and the OV08x40 entries both are for
sensors already supported in mainline which were missing.
The downside of adding these HIDs is that this will cause the IPU3 / IPU6
drivers to delay registering there /dev/video# nodes until a sensor driver
has bound, which for the non mainline drivers may never happen. This is
not really an issue because almost all IPU designs only have front (user)
facing sensors and all the added HIDs are for the main RGB (not IR) sensor.
So if the sensor driver is missing then the user can already not use
the camera and adding these HIDs does not really change that.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Sort the sensors in ipu_supported_sensors[] by ACPI HID rather then having
them in some random order.
While at it also use the correct (same as datasheet) capitalization
for the sensor names in the comments. Instead of sometimes writing
OV#### and sometimes ov####.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Alvium camera by default is in free running mode. Datasheet say that
acquisition frame rate reg can only be used if frame start trigger
mode is set to off.
Enable r/w acquisition frame rate and turn off trigger mode.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
[Sakari Ailus: Fix spelling of "acquisition".]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acquisition frame rate enable reg have a very long name let's reduce this
with an abbreviation.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
[Sakari Ailus: Fix spelling of "acquisition".]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Instead of reading device_fw reg as multiple regs let's read the entire
64bit reg using one i2c read and use bit masks and bit shifts to get fw
info.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Prior to the ongoing command privacy is on, it would return -1 to
indicate the current privacy status, and the ongoing command would
be well executed by firmware as well, so this is not error. This
patch changes its behavior to notify privacy on directly by V4L2
privacy control instead of reporting error.
Fixes: 29006e196a ("media: pci: intel: ivsc: Add CSI submodule")
Cc: stable@vger.kernel.org # for 6.6 and later
Reported-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There're possibilities that privacy status change notification happens
in the middle of the ongoing mei command which already takes the command
lock, but v4l2_ctrl_s_ctrl() would also need the same lock prior to this
patch, so this may results in circular locking problem. This patch adds
one dedicated lock for v4l2 control handler to avoid described issue.
Fixes: 29006e196a ("media: pci: intel: ivsc: Add CSI submodule")
Cc: stable@vger.kernel.org # for 6.6 and later
Reported-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/tuners/tda9887.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/radio/si470x/radio-si470x-common.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/ttpci/budget-core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/bt8xx/bt878.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/ivtv/ivtvfb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/go7007/go7007.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/go7007/go7007-usb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-empress.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-go7007.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-alsa.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-dvb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/marvell/mcam-core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/marvell/mmp_camera.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Return value of function 'i2c_transfer' is not checked that
may cause undefined behaviour.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2cf36ac447 ("[PATCH] v4l: 656: added support for the following cards")
Signed-off-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Report the average QP value of the current encoded frame via the
V4L2_CID_MPEG_VIDEO_AVERAGE_QP control, the value applies to the last
dequeued capture buffer.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is no need to add a lock in s_ctrl callback, it has been
synchronized by the ctrl_handler's lock, otherwise it may led to
a deadlock if the driver calls v4l2_ctrl_s_ctrl().
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As talked about in commit 14d3ae2efe ("ARM: 8507/1: dma-mapping: Use
DMA_ATTR_ALLOC_SINGLE_PAGES hint to optimize alloc"), it doesn't
really make sense to try to allocate contiguous chunks of memory for
video encoding/decoding. Let's switch the Mediatek vcodec driver to
pass DMA_ATTR_ALLOC_SINGLE_PAGES and take some of the stress off the
memory subsystem.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Both 'bs_dma' and 'dma_addr' are integers. No need to convert the
type from dma_addr_t to uint64_t again.
Fixes: d353c3c34a ("media: mediatek: vcodec: support 36 bits physical address")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The supported decoder commands are different for stateless and
stateful architectures. Add stateless decoder commands to fix
the v4l2-compliance test error below.
Codec ioctls:
VIDIOC_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
VIDIOC_TRY_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
VIDIOC_G_ENC_INDEX returned -1 (Inappropriate ioctl for device)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
VIDIOC_DECODER_CMD returned -1 (Invalid argument)
VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
fail: v4l2-test-codecs.cpp(126): ret
test VIDIOC_(TRY_)DECODER_CMD: FAIL
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Update copies of kernel headers, which resulted in support for the
new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC
prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector,
'map_shadow_stack' syscall for x86-32.
- Revert perf.data record memory allocation optimization that ended up
causing a regression, work is being done to re-introduce it in the
next merge window.
- Fix handling of minimal vmlinux.h file used with BPF's CO-RE when
interrupting the build.
* tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build
Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event"
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL
tools headers UAPI: Update i915_drm.h with the kernel sources
tools headers UAPI: Sync kvm headers with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall
perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools include UAPI: Sync linux/stat.h with the kernel sources
Pull EDAC fixes from Borislav Petkov:
- Convert PCI core error codes to proper error numbers since latter get
propagated all the way up to the module loading functions
* tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: Convert PCIBIOS_* return codes to errnos
EDAC/amd64: Convert PCIBIOS_* return codes to errnos
Pull clk fix from Stephen Boyd:
"One fix for the SiFive PRCI clocks so that the device boots again.
This driver was registering clkdev lookups that were always going to
be useless. This wasn't a problem until clkdev started returning an
error in these cases, causing this driver to fail probe, and thus boot
to fail because clks are essential for most drivers. The fix is
simple, don't use clkdev because this is a DT based system where
clkdev isn't used"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sifive: Do not register clkdevs for PRCI clocks
Pull smb client fixes from Steve French:
"Two small smb3 client fixes:
- fix deadlock in umount
- minor cleanup due to netfs change"
* tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Don't advance the I/O iterator before terminating subrequest
smb: client: fix deadlock in smb2_find_smb_tcon()
Pull HID fixes from Benjamin Tissoires:
- fix potential read out of bounds in hid-asus (Andrew Ballance)
- fix endian-conversion on little endian systems in intel-ish-hid (Arnd
Bergmann)
- A couple of new input event codes (Aseda Aboagye)
- errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
(Christophe JAILLET), hid-logitech-dj (José Expósito)
- current leakage fix while the device is in suspend on a i2c-hid
laptop (Johan Hovold)
- other assorted smaller fixes and device ID / quirk entry additions
* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: Ignore battery for ELAN touchscreens 2F2C and 4116
HID: i2c-hid: elan: fix reset suspend current leakage
dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
input: Add support for "Do Not Disturb"
input: Add event code for accessibility key
hid: asus: asus_report_fixup: fix potential read out of bounds
HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
HID: intel-ish-hid: fix endian-conversion
HID: nintendo: Fix an error handling path in nintendo_hid_probe()
HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
HID: core: remove unnecessary WARN_ON() in implement()
HID: nvidia-shield: Add missing check for input_ff_create_memless
HID: intel-ish-hid: Fix build error for COMPILE_TEST
Pull Kbuild fixes from Masahiro Yamada:
- Fix the initial state of the save button in 'make gconfig'
- Improve the Kconfig documentation
- Fix a Kconfig bug regarding property visibility
- Fix build breakage for systems where 'sed' is not installed in /bin
- Fix a false warning about missing MODULE_DESCRIPTION()
* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
kconfig: remove wrong expr_trans_bool()
kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
kconfig: doc: fix a typo in the note about 'imply'
kconfig: gconf: give a proper initial state to the Save button
kconfig: remove unneeded code for user-supplied values being out of range
Pull media fixes from Mauro Carvalho Chehab:
- fixes for the new ipu6 driver (and related fixes to mei csi driver)
- fix a double debugfs remove logic at mgb4 driver
- a documentation fix
* tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: intel/ipu6: add csi2 port sanity check in notifier bound
media: intel/ipu6: update the maximum supported csi2 port number to 6
media: mei: csi: Warn less verbosely of a missing device fwnode
media: mei: csi: Put the IPU device reference
media: intel/ipu6: fix the buffer flags caused by wrong parentheses
media: intel/ipu6: Fix an error handling path in isys_probe()
media: intel/ipu6: Move isys_remove() close to isys_probe()
media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove()
media: Documentation: v4l: Fix ACTIVE route flag
media: mgb4: Fix double debugfs remove
Pull irq fixes from Ingo Molnar:
- Fix possible memory leak the riscv-intc irqchip driver load failures
- Fix boot crash in the sifive-plic irqchip driver caused by recently
changed boot initialization order
- Fix race condition in the gic-v3-its irqchip driver
* tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()
irqchip/sifive-plic: Chain to parent IRQ after handlers are ready
irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails
Pull x86 fixes from Ingo Molnar:
"Miscellaneous fixes:
- Fix kexec() crash if call depth tracking is enabled
- Fix SMN reads on inaccessible registers on certain AMD systems"
* tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd_nb: Check for invalid SMN reads
x86/kexec: Fix bug with call depth tracking
Pull perf event fix from Ingo Molnar:
"Fix race between perf_event_free_task() and perf_event_release_kernel()
that can result in missed wakeups and hung tasks"
* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix missing wakeup when waiting for context reference
