The devm_clk_get_enabled() function prepares and enables the
particular clock, which then automatically gets disabled and
unprepared on probe failure and on device removal.
Use that function instead of devm_clk_get() and remove the
clk_prepare_enable()/clk_disable_unprepare() calls in order
to simplify the code.
This also ensures that the clocks are handled in the correct
order during device removal.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250916-qpic-snand-devm_clk_get_enabled-v1-1-09953493b7f1@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mediatek SPI hardware natively supports dual and quad modes, and these
modes are already enabled for SPI flash devices under spi-mem framework
in MTK SPI controller spi-mt65xx. However, other SPI devices, such as
touch panels, are limited to single mode because spi-mt65xx lacks SPI
mode argument parsing from SPI framework for these SPI devices outside
spi-mem framework.
This patch adds dual and quad mode support for these SPI devices by
introducing a new API, mtk_spi_set_nbits, for SPI mode argument parsing.
Signed-off-by: Tim Kuo <Tim.Kuo@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250917055839.500615-1-Tim.Kuo@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently a call to regmap_write is not being error checked because the
return checke is being performed on the variable ret and this variable
is not assigned the return value from the regmap_write call. Fix this
by adding in the missing assignment.
Fixes: 4670db6f32 ("spi: amlogic: add driver for Amlogic SPI Flash Controller")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250913201612.1338217-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from David Lechner <dlechner@baylibre.com>:
We have a pending major version bump for the axi-spi-engine so to
prepare for that, improve the existing version checks for feature
enablement.
Merge series from Xianwei Zhao <xianwei.zhao@amlogic.com>:
This Flash Controller is derived by adding an SPI path to the original
raw NAND controller. This controller supports two modes: raw mode and
SPI mode. The raw mode has already been implemented in the community
(drivers/mtd/nand/raw/meson_nand.c).
This submission supports the SPI mode.
Add the drivers and bindings corresponding to the SPI Flash Controller.
The 'max_cs' stores the largest chip select number. It should only
be updated when the current 'cs' is greater than existing 'max_cs'. So,
fix the condition accordingly.
Also, return failure if there are no flash device declared.
Fixes: 0f3841a5e1 ("spi: cadence-qspi: report correct number of chip-select")
CC: stable@vger.kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Message-ID: <20250905185958.3575037-4-s-k6@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
cqspi_read_setup() and cqspi_write_setup() program the address width as
the last step in the setup. This is likely to be immediately followed by
a DAC region read/write. On TI K3 SoCs the DAC region is on a different
endpoint from the register region. This means that the order of the two
operations is not guaranteed, and they might be reordered at the
interconnect level. It is possible that the DAC read/write goes through
before the address width update goes through. In this situation if the
previous command used a different address width the OSPI command is sent
with the wrong number of address bytes, resulting in an invalid command
and undefined behavior.
Read back the size register to make sure the write gets flushed before
accessing the DAC region.
Fixes: 1406234105 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
CC: stable@vger.kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Message-ID: <20250905185958.3575037-3-s-k6@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
cqspi_indirect_read_execute() and cqspi_indirect_write_execute() first
set the enable bit on APB region and then start reading/writing to the
AHB region. On TI K3 SoCs these regions lie on different endpoints. This
means that the order of the two operations is not guaranteed, and they
might be reordered at the interconnect level.
It is possible for the AHB write to be executed before the APB write to
enable the indirect controller, causing the transaction to be invalid
and the write erroring out. Read back the APB region write before
accessing the AHB region to make sure the write got flushed and the race
condition is eliminated.
Fixes: 1406234105 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
CC: stable@vger.kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Message-ID: <20250905185958.3575037-2-s-k6@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull i2c fixes from Wolfram Sang:
- i801: drop superfluous WDT entry for Birch
- rtl9300:
- fix channel number check in probe
- check data length boundaries in xfer
- drop broken SMBus quick operation
* tag 'i2c-for-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rtl9300: remove broken SMBus Quick operation support
i2c: rtl9300: ensure data length is within supported range
i2c: rtl9300: fix channel number bound check
i2c: i801: Hide Intel Birch Stream SoC TCO WDT
Pull EDAC fix from Borislav Petkov:
- Remove a misplaced dma_free_coherent() call in altera_edac
* tag 'edac_urgent_for_v6.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/altera: Delete an inappropriate dma_free_coherent() call
Pull timer fix from Ingo Molnar:
"Fix a severe slowdown regression in the timer vDSO code related to the
while() loop in __iter_div_u64_rem(), when the AUX-clock is enabled"
* tag 'timers-urgent-2025-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso/vsyscall: Avoid slow division loop in auxiliary clock update
Pull locking fix from Ingo Molnar:
"Fix an 'allocation from atomic context' regression in the futex
vmalloc variant"
* tag 'locking-urgent-2025-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Move futex_hash_free() back to __mmput()
Pull perf event fix from Ingo Molnar:
"Fix regression where PERF_EVENT_IOC_REFRESH counters miss a PMU-stop"
* tag 'perf-urgent-2025-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix the POLL_HUP delivery breakage
Pull RISC-V fixes from Paul Walmsley:
- LTO fix for clang when building with CONFIG_CMODEL_MEDLOW
- Fix for ACPI CPPC CSR read/write return values
- Several fixes for incorrect access widths in thread_info.cpu reads
- Fix an issue in __put_user_nocheck() that was causing the glibc
tst-socket-timestamp test to fail
- Initialize struct kexec_buf records in several kexec-related
functions, which were generating UBSAN warnings
- Two fixes for sparse warnings
* tag 'riscv-for-linus-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix sparse warning about different address spaces
riscv: Fix sparse warning in __get_user_error()
riscv: kexec: Initialize kexec_buf struct
riscv: use lw when reading int cpu in asm_per_cpu
riscv, bpf: use lw when reading int cpu in bpf_get_smp_processor_id
riscv, bpf: use lw when reading int cpu in BPF_MOV64_PERCPU_REG
riscv: uaccess: fix __put_user_nocheck for unaligned accesses
riscv: use lw when reading int cpu in new_vmalloc_check
ACPI: RISC-V: Fix FFH_CPPC_CSR error handling
riscv: Only allow LTO with CMODEL_MEDANY
Pull rust fixes from Miguel Ojeda:
- Two changes to prepare for the future Rust 1.91.0 release (expected
2025-10-30, currently in nightly): a target specification format
change and a renamed, soon-to-be-stabilized 'core' function.
* tag 'rust-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: support Rust >= 1.91.0 target spec
rust: use the new name Location::file_as_c_str() in Rust >= 1.91.0
i2c-host-fixes for v6.17-rc5
- i801: fix device IDs
- in rtl9300:
- fix channel number check in probe
- check data length boundaries in xfer
- drop unsupported SMBus quick operation
Pull perf tools fixes from Namhyung Kim:
"Fixes for use-after-free that resulted in segfaults after merging the
bpf tree.
Also a couple of build and test fixes"
* tag 'perf-tools-fixes-for-v6.17-2025-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf symbol-elf: Add support for the block argument for libbfd
perf test: Checking BPF metadata collection fails on version string
perf tests: Fix "PE file support" test build
perf bpf-utils: Harden get_bpf_prog_info_linear
perf bpf-utils: Constify bpil_array_desc
perf bpf-event: Fix use-after-free in synthesis
The kexec_buf structure was previously declared without initialization.
commit bf454ec31a ("kexec_file: allow to place kexec_buf randomly")
added a field that is always read but not consistently populated by all
architectures. This un-initialized field will contain garbage.
This is also triggering a UBSAN warning when the uninitialized data was
accessed:
------------[ cut here ]------------
UBSAN: invalid-load in ./include/linux/kexec.h:210:10
load of value 252 is not a valid value for type '_Bool'
Zero-initializing kexec_buf at declaration ensures all fields are
cleanly set, preventing future instances of uninitialized memory being
used.
Fixes: bf454ec31a ("kexec_file: allow to place kexec_buf randomly")
Signed-off-by: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250827-kbuf_all-v1-2-1df9882bb01a@debian.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The type of the value to write should be determined by the size of the
destination, not by the value itself, which may be a constant. This
aligns the behavior with x86_64, where __typeof__(*(__gu_ptr)) is used
to infer the correct type.
This fixes an issue in put_cmsg, which was only writing 4 out of 8
bytes to the cmsg_len field, causing the glibc tst-socket-timestamp test
to fail.
Fixes: ca1a66cdd6 ("riscv: uaccess: do not do misaligned accesses in get/put_user()")
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250724220853.1969954-1-aurelien@aurel32.net
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Pull SCSI fixes from James Bottomley:
"Obvious driver patch plus update to sr to add back rotational media
flag since CDROMS are rotational"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sr: Reinstate rotational media flag
scsi: lpfc: Fix buffer free/clear order in deferred receive path
Pull spi fixes from Mark Brown:
"The largest batch of fixes here is a series of fixes for the Freescale
LPSPI driver which James Clark pulled out of their BSP while looking
at support for the NXP S32G version of the controller.
The majority of this turned out to be bug fixes that affect existing
systems with the actual S32G support being just a small quirk that
would be unremarkable by itself, the whole series has had a good
amount of testing and review and the individual patches are all pretty
straightforward by themselves.
We also have a few other driver specific fixes, including a relatively
large but simple one for the Cadence QuadSPI driver"
* tag 'spi-fix-v6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-qpic-snand: unregister ECC engine on probe error and device remove
spi: cadence-quadspi: Implement refcount to handle unbind during busy
spi: spi-fsl-lpspi: Add compatible for S32G
spi: spi-fsl-lpspi: Parameterize reading num-cs from hardware
spi: spi-fsl-lpspi: Treat prescale_max == 0 as no erratum
spi: spi-fsl-lpspi: Constify devtype datas
dt-bindings: lpspi: Document support for S32G
spi: spi-fsl-lpspi: Clear status register after disabling the module
spi: spi-fsl-lpspi: Reset FIFO and disable module on transfer abort
spi: spi-fsl-lpspi: Set correct chip-select polarity bit
spi: spi-fsl-lpspi: Fix transmissions when using CONT
spi: microchip-core-qspi: stop checking viability of op->max_freq in supports_op callback
Pull arm64 fixes from Catalin Marinas:
- Incorrect __BITS_PER_LONG as 64 when compiling the compat vDSO
- Unreachable PLT for ftrace_caller() in a module's .init.text
following past reworking of the module VA range selection
- Memory leak in the ACPI iort_rmr_alloc_sids() after a failed
krealloc_array()
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ftrace: fix unreachable PLT for ftrace_caller in init_module with CONFIG_DYNAMIC_FTRACE
ACPI/IORT: Fix memory leak in iort_rmr_alloc_sids()
arm64: uapi: Provide correct __BITS_PER_LONG for the compat vDSO
Pull audit fix from Paul Moore:
"A single small audit patch to fix a potential out-of-bounds read
caused by a negative array index when comparing paths"
* tag 'audit-pr-20250905' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix out-of-bounds read in audit_compare_dname_path()
Pull smb client fixes from Steve French:
- Fix two potential NULL pointer references
- Two debugging improvements (to help debug recent issues) a new
tracepoint, and minor improvement to DebugData
- Trivial comment cleanup
* tag '6.17-RC4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: prevent NULL pointer dereference in UTF16 conversion
smb: client: show negotiated cipher in DebugData
smb: client: add new tracepoint to trace lease break notification
smb: client: fix spellings in comments
smb: client: Fix NULL pointer dereference in cifs_debug_dirs_proc_show()
Pull hwmon fixes from Guenter Roeck:
- ina238: Various value range fixes when writing limit attributes
- mlxreg-fan: Prevent fans from getting stuck at 0 RPM
* tag 'hwmon-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ina238) Correctly clamp power limits
hwmon: (ina238) Correctly clamp shunt voltage limit
hwmon: (ina238) Correctly clamp temperature
hwmon: mlxreg-fan: Prevent fans from getting stuck at 0 RPM
Pull gpio fixes from Bartosz Golaszewski:
- fix GPIO submenu regression in Kconfig
- fix make clean under tools/gpio/
* tag 'gpio-fixes-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
tools: gpio: remove the include directory on make clean
gpio: fix GPIO submenu in Kconfig
Pull x86 platform driver fixes from Ilpo Järvinen:
- acer-wmi: Stop using ACPI bitmap for platform profile choices
- amd/hfi: Fix pcct_tbl leak
- amd/pmc: Add TUXEDO IB Pro Gen10 AMD to spurious 8042 quirks
- asus-wmi:
- Fix registration races
- Fix ROG button mapping, tablet mode on ASUS ROG Z13
- Support more keys on ExpertBook B9
- hp-wmi: Add support for Fn+P hotkey
- intel/pmc: Add Bartlett Lake support
- intel/power-domains: Use topology_logical_package_id() for package ID
* tag 'platform-drivers-x86-v6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel: power-domains: Use topology_logical_package_id() for package ID
platform/x86: acer-wmi: Stop using ACPI bitmap for platform profile choices
platform/x86: hp-wmi: Add support for Fn+P hotkey
platform/x86/intel/pmc: Add Bartlett Lake support to intel_pmc_core
platform/x86: asus-wmi: Fix racy registrations
platform/x86/amd/pmc: Add TUXEDO IB Pro Gen10 AMD to spurious 8042 quirks list
platform/x86: asus-wmi: map more keys on ExpertBook B9
platform/x86: asus-wmi: Fix ROG button mapping, tablet mode on ASUS ROG Z13
platform/x86: asus-wmi: Remove extra keys from ignore_key_wlan quirk
platform/x86/amd: hfi: Fix pcct_tbl leak in amd_hfi_metadata_parser()
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith
- Fix protection information ref tag for device side gen/strip
(Christoph)
- MD pull request via Yu
- fix data loss for writemostly in raid1 (Yu Kuai)
- fix potentional data loss by skipping recovery (Li Nan)
* tag 'block-6.17-20250905' of git://git.kernel.dk/linux:
md: prevent incorrect update of resync/recovery offset
md/raid1: fix data lost for writemostly rdev
nvme: fix PI insert on write
On arm64, it has been possible for a module's sections to be placed more
than 128M away from each other since commit:
commit 3e35d303ab ("arm64: module: rework module VA range selection")
Due to this, an ftrace callsite in a module's .init.text section can be
out of branch range for the module's ftrace PLT entry (in the module's
.text section). Any attempt to enable tracing of that callsite will
result in a BRK being patched into the callsite, resulting in a fatal
exception when the callsite is later executed.
Fix this by adding an additional trampoline for .init.text, which will
be within range.
No additional trampolines are necessary due to the way a given
module's executable sections are packed together. Any executable
section beginning with ".init" will be placed in MOD_INIT_TEXT,
and any other executable section, including those beginning with ".exit",
will be placed in MOD_TEXT.
Fixes: 3e35d303ab ("arm64: module: rework module VA range selection")
Cc: <stable@vger.kernel.org> # 6.5.x
Signed-off-by: panfan <panfan@qti.qualcomm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250905032236.3220885-1-panfan@qti.qualcomm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull drm fixes from Dave Airlie:
"Weekly drm fixes roundup, nouveau has two fixes for fence/irq racing
problems that should fix a bunch of instability in userspace.
Otherwise amdgpu along with some single fixes to bridge, xe, ivpu.
Looks about usual for this time in the release.
scheduler:
- fix race in unschedulable tracepoint
bridge:
- ti-sn65dsi86: fix REFCLK setting
xe:
- Fix incorrect migration of backed-up object to VRAM
amdgpu:
- UserQ fixes
- MES 11 fix
- eDP/LVDS fix
- Fix non-DC audio clean up
- Fix duplicate cursor issue
- Fix error path in PSP init
nouveau:
- fix nonstall interrupt handling
- fix race on fence vs irq emission
- update MAINTAINERS entry
ivpu:
- prevent recovery work during device remove"
* tag 'drm-fixes-2025-09-05' of https://gitlab.freedesktop.org/drm/kernel:
drm/amd/amdgpu: Fix missing error return on kzalloc failure
drm/bridge: ti-sn65dsi86: fix REFCLK setting
MAINTAINERS: Update git entry for nouveau
drm/xe: Fix incorrect migration of backed-up object to VRAM
drm/sched: Fix racy access to drm_sched_entity.dependency
accel/ivpu: Prevent recovery work from being queued during device removal
nouveau: Membar before between semaphore writes and the interrupt
nouveau: fix disabling the nonstall irq due to storm code
drm/amd/display: Clear the CUR_ENABLE register on DCN314 w/out DPP PG
drm/amdgpu: drop hw access in non-DC audio fini
drm/amd: Re-enable common modes for eDP and LVDS
drm/amdgpu/mes11: make MES_MISC_OP_CHANGE_CONFIG failure non-fatal
drm/amdgpu/sdma: bump firmware version checks for user queue support
Pull crypto library fixes from Eric Biggers:
"Fix a regression caused by my commits that reimplemented the sha1,
sha256, and sha512 crypto_shash algorithms on top of the library API.
Specifically, the export_core and import_core methods stopped being
supported, which broke some hardware offload drivers (such as qat)
that recently started depending on these for fallback functionality.
Later I'd like to make these drivers just use the library API for
their fallback. Then these methods won't be needed anymore. But for
now, this fixes the regression for 6.17"
* tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: sha512 - Implement export_core() and import_core()
crypto: sha256 - Implement export_core() and import_core()
crypto: sha1 - Implement export_core() and import_core()
Pull PCMCIA fixes and cleanups from Dominik Brodowski:
"A number of minor PCMCIA bugfixes and cleanups, including the removal
of unused code paths"
[ Dominik suggested this might be 6.18 material, but having looked
through this, it looks appropriate early: minor trivial fixes and then
one slightly bigger patch that removes dead code - Linus ]
* tag 'pcmcia-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: Add error handling for add_interval() in do_validate_mem()
pcmcia: cs: Remove unused pcmcia_get_socket_by_nr
pcmcia: omap: Add missing check for platform_get_resource
pcmcia: Use str_off_on() and str_yes_no() helpers
pcmcia: remove PCCARD_IODYN
pcmcia: ds: Emphasize "really" epizeuxis
pcmcia: Fix a NULL pointer dereference in __iodyn_find_io_region()
pcmcia: omap_cf: Mark driver struct with __refdata to prevent section mismatch
Pull MD fixes from Yu:
"- fix data loss for writemostly in raid1, by Yu Kuai;
- fix potentional data lost by skipping recovery, by Li Nan;"
* tag 'md-6.17-20250905' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md: prevent incorrect update of resync/recovery offset
md/raid1: fix data lost for writemostly rdev
