ASPEED device tree updates for 5.5
This adds recently merged drivers to the aspeed g4 and g5 defconfigs,
and to the multi v5 and v7 shared defconfigs.
* tag 'aspeed-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: config: multi_v5: ASPEED SDHCI, SGPIO
ARM: configs: multi_v7: ASPEED network, gpio, FSI
ARM: config: aspeed-g4: Add MMC, and cleanup
ARM: config: aspeed-g5: Add SGPIO and FSI drivers
ARM: config: aspeed-g5: Enable 8250_DW quirks
Link: https://lore.kernel.org/r/CACPK8Xc3a=6irkTSfwyPrr=nWv_fa9nMxthtC2AyqFJEWvuMwg@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable drivers used by the ASPEED AST2400 SoC so the multi v5 defconfig
can run on those boards.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable drivers used by the ASPEED SoCs so the multi v7 defconfig can run
on those boards.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The PCA muxes now depend on I2C_MUX. SPI si now required by SPI-NOR.
Add the eMMC driver, and remove the FSI SBEFIFO which is not used on AST2400
systems.
The remaining changes are cleanups from regenerating the defconfig.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
These are recently merged drivers for ASPEED systems.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This driver option is used by the AST2600 A0 boards to work around a
hardware issue.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
AT91 defconfig for 5.5
- Unselect PIT now that the TCBs can be used at boot time
* tag 'at91-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: unselect PIT
Link: https://lore.kernel.org/r/20191107222445.GA202433@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>
i.MX defconfig update for 5.5:
- Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support
in imx_v6_v7_defconfig.
- Enable newly added S32V234 SoC and its UART driver support in arm64
defconfig.
- Built i.MX8QXP SCU key driver as module in arm64 defconfig.
- Change AT803X Ethernet PHY driver from module to built-in, so that
we can boot i.MX8MM EVK board with rootfs on NFS.
* tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
arm64: defconfig: Enable configs for S32V234
arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
ARM: imx_v6_v7_defconfig: Build USB_CONFIGFS into kernel
ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX7ULP_WDT by default
Link: https://lore.kernel.org/r/20191105150315.15477-7-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy
will be reset. Without CONFIG_AT803X_PHY as y, board will stop
booting in NFS DHCP, because phy is not ready. So mark
CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ARM: tegra: Default configuration changes for v5.5-rc1
Enables the Tegra VDE driver by default. This is currently in staging
but can be used with existing userspace to do hardware-accelerated video
decoding of H.264 streams.
* tag 'tegra-for-5.5-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable Tegra VDE driver in tegra_defconfig
Link: https://lore.kernel.org/r/20191102144521.3863321-7-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Renesas ARM64 defconfig updates for v5.5 (take two)
- Enable support for the new R-Car M3-W+ (r8a77961) SoC.
* tag 'renesas-arm64-defconfig-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A77961 SoC
Link: https://lore.kernel.org/r/20191101155842.31467-4-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Renesas ARM defconfig updates for v5.5
- Refresh shmobile_defconfig for v5.4-rc1.
* tag 'renesas-arm-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v5.4-rc1
Link: https://lore.kernel.org/r/20191101155842.31467-2-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
ARM64: hisilicon: defconfig updates for 5.5
- enable ARM SMMUv3 PMU and hisi ZIP controller as module for
Kunpeng920 SoC
* tag 'hisi-arm64-defconfig-for-5.5' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable SMMU v3 PMCG
arm64: defconfig: Enable HiSilicon ZIP controller
Link: https://lore.kernel.org/r/5DB95B1E.8060607@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
arm64 defconfig for v5.5
- Add SPI_CADENCE_QUADSPI to support the Cadence QSPI driver
- Add INTEL_STRATIX10_RSU as a module to support the Remote Service
Update driver on Stratix10 and Agilex platforms
- Add GPIO_ALTERA as a module to support the Altera GPIO driver
* tag 'arm64_defconfig_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: defconfig: enable Altera GPIO controller
arm64: defconfig: enable rsu driver
arm64: defconfig: enable the Cadence QSPI controller
Link: https://lore.kernel.org/r/20191029143737.24850-2-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Update the defconfig for Renesas ARM boards:
- Drop CONFIG_ARM_ERRATA_754322=y (auto-enabled since commit
2eced4607a ("soc: renesas: Enable ARM_ERRATA_754322 for
affected Cortex-A9")),
- Drop CONFIG_MTD_M25P80=y (removed in commit b35b9a1036 ("mtd:
spi-nor: Move m25p80 code in spi-nor.c")),
- Drop CONFIG_LCD_CLASS_DEVICE=n (no longer auto-enabled since commit
bcd69da98e ("video: backlight: Drop default m for
{LCD,BACKLIGHT_CLASS_DEVICE}")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191025135325.32242-1-geert+renesas@glider.be
Include support for Micrel KSZ9031 PHY driver in sunxi_defconfig,
which fixes issues of link not coming up at boot time with
certain link partners.
Micrel KSZ9031 PHY chip is used on Olimex A20-OLinuXino-LIME2
boards.
The errata fix itself has been implemented in commit
"3aed3e2a143c96: net: phy: micrel: add Asym Pause workaround"
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
This patch adds the new allwinner crypto configs to ARM64 defconfig
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
This patch adds the new Allwinner crypto configs to sunxi_defconfig
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The video decoder driver was tested by time and works absolutely fine.
The reason why it is in staging is because it doesn't provide common V4L
interface yet, this shouldn't stop driver enabling in the defconfig since
our userspace (libvdpau-tegra) provides combined acceleration of decoding
and displaying without use of V4L.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the CONFIG_TOUCHSCREEN_DA9052 option, so that touchscreen
can be functional by default on imx53-qsb.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Select CONFIG_KEYBOARD_IMX_SC_KEY as module by default to
support i.MX8QXP scu key driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
HiSilicon Kunpeng920 SoC's SMMU has Performance Monitor Counter Groups(PMCG).
This patch enables related driver in defconfig.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable CONFIG_CRYPTO_DEV_HISI_ZIP for HiSilicon ZIP controller in Kunpeng920
SoC.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Defconfig changes for omap2plus_defconfig for v5.5
A series of changes from Adam Ford to update for removed and moved items,
and then enable crypto devices and MT9P031 video as loadable modules.
Looks like I missed unifying the subject line for one commit, but I did
not want to mess with the commit after pushing it out.
* tag 'omap-for-v5.5/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
configs: omap2plus: Enable VIDEO_MT9P031 module
ARM: omap2plus_defconfig: Enable HW Crypto engine modules
ARM: omap2plus_defconfig: Update for moved item
ARM: omap2plus_defconfig: Update for removed items
Link: https://lore.kernel.org/r/pull-1571853258-16998@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Fixes for omaps for v5.4-rc cycle
More fixes for omap variants:
- Update more panel options in omap2plus_defconfig that got changed
as we moved to use generic LCD panels
- Remove unused twl_keypad for logicpd-torpedo-som to avoid boot
time warnings. This is only a cosmetic fix, but at least dmesg output
is now getting more readable after all the fixes to remove pointless
warnings
- Fix gpu_cm node name as we still have a non-standard node name
dependency for clocks. This should eventually get fixed by use
of domain specific compatible property
- Fix use of i2c-mux-idle-disconnect for m3874-iceboard
- Use level interrupt for omap4 & 5 wlcore to avoid lost edge
interrupts
* tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Use level interrupt for omap4 & 5 wlcore
ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage
ARM: dts: omap5: fix gpu_cm clock provider name
ARM: dts: logicpd-torpedo-som: Remove twl_keypad
ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
Link: https://lore.kernel.org/r/pull-1571242890-118432@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable Intel Stratix10 Remote System Update (RSU) driver
The Intel Remote System Update (RSU) driver provides a way for customers
to update the boot configuration of a Intel Stratix 10 SoC device with
significantly reduced risk of corrupting the bitstream storage and
bricking the system.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Logic PD Torpedo Development Kit supports a Leopard Imaging
camera based on the Aptina MT9P031 sensor.
This patch enables this to be built as a module.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Renesas ARM64 defconfig updates for v5.5
- Enable support for the new RZ/G2N (r8a774b1) SoC.
* tag 'renesas-arm64-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A774B1 SoC
Link: https://lore.kernel.org/r/20191018101136.26350-3-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Some imx chips (6sll, 6ulz, 7ulp) don't have ethernet support and only a
limited number of USB controllers. For such cases NXP suggests
configuring the USB controller as an ethernet gadget for network boot
testing.
Set USB_CONFIGFS to be built into the kernel so that we can configure
the ethernet gadget without needing modules.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 572cf7d7b0 ("ARM: dts: Improve omap l4per idling with wlcore edge
sensitive interrupt") changed wlcore interrupts to use edge interrupt based
on what's specified in the wl1835mod.pdf data sheet.
However, there are still cases where we can have lost interrupts as
described in omap_gpio_unidle(). And using a level interrupt instead of edge
interrupt helps as we avoid the check for untriggered GPIO interrupts in
omap_gpio_unidle().
And with commit e6818d29ea ("gpio: gpio-omap: configure edge detection
for level IRQs for idle wakeup") GPIOs idle just fine with level interrupts.
Let's change omap4 and 5 wlcore users back to using level interrupt
instead of edge interrupt. Let's not change the others as I've only seen
this on omap4 and 5, probably because the other SoCs don't have l4per idle
independent of the CPUs.
Fixes: 572cf7d7b0 ("ARM: dts: Improve omap l4per idling with wlcore edge sensitive interrupt")
Depends-on: e6818d29ea ("gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup")
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Eyal Reizer <eyalr@ti.com>
Cc: Guy Mishol <guym@ti.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable devfreq events along with drivers for scaling frequency and
voltages of Exynos buses and Dynamic Memory Controller (DMC). This
usually brings energy saving benefits.
So far devfreq was disabled because it was causing hangs during system
reboot (voltage not matching reset frequency). This was already fixed.
Occasionally, devfreq might negatively impact performance of certain SoC
blocks, e.g. when a bus is scaled down but some block (like Mixer with
two Full HD windows) wants to perform high-throughput DMA operations.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Sync with exynos_defconfig and enable following options for Samsung
Exynos SoC based boards:
1. NFC_S3FWRN5_I2C (with NFC stack): Samsung S3FWRN5 NCI NFC Controller,
used for example on Exynos5433 (if booted in 32-bit mode),
2. S3C2410_WATCHDOG: watchdog driver used on S3C, S5P and Exynos SoCs,
3. REGULATOR_S2MPA01: Samsung S2MPA01 regulators driver present on
Exynos5260 RexNos REX-RED board,
4. SND_SOC_ARNDALE: sound support on Arndale boards,
5. EXYNOS_IOMMU: IOMMU driver used on all Exynos SocS,,
6. EXTCON_MAX14577, EXTCON_MAX77693 and EXTCON_MAX8997: extcon drivers
for handling micro USB on mobile Samsung boards (Trats, Trats2,
Rinato),
7. PHY_EXYNOS5250_SATA: SATA phy for Exynos5250 present on Arndale and
SMDK5250 boards.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The clkctrl code searches for the parent clockdomain based on the name
of the CM provider node. The introduction of SGX node for omap5 made
the node name for the gpu_cm to be clock-controller. There is no
clockdomain named like this, so the lookup fails. Fix by changing
the node name properly.
Fixes: 394534cb07 ("ARM: dts: Configure sgx for omap5")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
In commit 4ed2863951 ("fs, elf: drop MAP_FIXED usage from elf_map") we
changed elf to use MAP_FIXED_NOREPLACE instead of MAP_FIXED for the
executable mappings.
Then, people reported that it broke some binaries that had overlapping
segments from the same file, and commit ad55eac74f ("elf: enforce
MAP_FIXED on overlaying elf segments") re-instated MAP_FIXED for some
overlaying elf segment cases. But only some - despite the summary line
of that commit, it only did it when it also does a temporary brk vma for
one obvious overlapping case.
Now Russell King reports another overlapping case with old 32-bit x86
binaries, which doesn't trigger that limited case. End result: we had
better just drop MAP_FIXED_NOREPLACE entirely, and go back to MAP_FIXED.
Yes, it's a sign of old binaries generated with old tool-chains, but we
do pride ourselves on not breaking existing setups.
This still leaves MAP_FIXED_NOREPLACE in place for the load_elf_interp()
and the old load_elf_library() use-cases, because nobody has reported
breakage for those. Yet.
Note that in all the cases seen so far, the overlapping elf sections
seem to be just re-mapping of the same executable with different section
attributes. We could possibly introduce a new MAP_FIXED_NOFILECHANGE
flag or similar, which acts like NOREPLACE, but allows just remapping
the same executable file using different protection flags.
It's not clear that would make a huge difference to anything, but if
people really hate that "elf remaps over previous maps" behavior, maybe
at least a more limited form of remapping would alleviate some concerns.
Alternatively, we should take a look at our elf_map() logic to see if we
end up not mapping things properly the first time.
In the meantime, this is the minimal "don't do that then" patch while
people hopefully think about it more.
Reported-by: Russell King <linux@armlinux.org.uk>
Fixes: 4ed2863951 ("fs, elf: drop MAP_FIXED usage from elf_map")
Fixes: ad55eac74f ("elf: enforce MAP_FIXED on overlaying elf segments")
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
