Pull ARM SoC fixes from Arnd Bergmann:
"All the changes this time are minor devicetree corrections, the
majority being for 64-bit Rockchip SoC support. These are a couple of
corrections for properties that are in violation of the binding, some
that put the machine into safer operating points for the eMMC and
thermal settings, and missing properties that prevented rk356x PCIe
and ethernet from working correctly.
The changes for amlogic and mediatek address incorrect properties that
were preventing the display support on MT8195 and the MMC support on
various Meson SoCs from working correctly.
The stihxxx-b2120 change fixes the GPIO polarity for the DVB tuner to
allow this to be used correctly after a futre driver change, though it
has no effect on older kernels"
* tag 'soc-fixes-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: meson-gx: Make mmc host controller interrupts level-sensitive
arm64: dts: meson-g12-common: Make mmc host controller interrupts level-sensitive
arm64: dts: meson-axg: Make mmc host controller interrupts level-sensitive
ARM: dts: stihxxx-b2120: fix polarity of reset line of tsin0 port
arm64: dts: mediatek: mt8195: Fix vdosys* compatible strings
arm64: dts: rockchip: align rk3399 DMC OPP table with bindings
arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a
arm64: dts: rockchip: fix probe of analog sound card on rock-3a
arm64: dts: rockchip: add missing #interrupt-cells to rk356x pcie2x1
arm64: dts: rockchip: fix input enable pinconf on rk3399
ARM: dts: rockchip: add power-domains property to dp node on rk3288
arm64: dts: rockchip: add io domain setting to rk3566-box-demo
arm64: dts: rockchip: remove unsupported property from sdmmc2 for rock-3a
arm64: dts: rockchip: drop unused LED mode property from rk3328-roc-cc
arm64: dts: rockchip: reduce thermal limits on rk3399-pinephone-pro
arm64: dts: rockchip: use correct reset names for rk3399 crypto nodes
According to c8sectpfe driver code we first drive reset line low and
then high to reset the port, therefore the reset line is supposed to
be annotated as "active low". This will be important when we convert
the driver to gpiod API.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Fixes to adapt to correct binding behaviour and fixes for devices on some boards
Most notably may be the adaption of lower thermal limits for the pinephone
pro, where the original hiher ones could result in (possibly permanent)
display issues.
* tag 'v6.2-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: align rk3399 DMC OPP table with bindings
arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a
arm64: dts: rockchip: fix probe of analog sound card on rock-3a
arm64: dts: rockchip: add missing #interrupt-cells to rk356x pcie2x1
arm64: dts: rockchip: fix input enable pinconf on rk3399
ARM: dts: rockchip: add power-domains property to dp node on rk3288
arm64: dts: rockchip: add io domain setting to rk3566-box-demo
arm64: dts: rockchip: remove unsupported property from sdmmc2 for rock-3a
arm64: dts: rockchip: drop unused LED mode property from rk3328-roc-cc
arm64: dts: rockchip: reduce thermal limits on rk3399-pinephone-pro
arm64: dts: rockchip: use correct reset names for rk3399 crypto nodes
Link: https://lore.kernel.org/r/3514663.mvXUDI8C0e@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX fixes for 6.2, round 2:
- Update MAINTAINERS i.MX entry to match arm64 freescale DTS.
- Drop misused 'uart-has-rtscts' from imx8m-venice boards.
- Fix USB host over-current polarity for imx7d-smegw01 board.
- Fix a typo in i.MX8DXL sc_pwrkey property name.
- Fix GPIO watchdog property for i.MX8MM eDM SBC board.
- Keep Ethernet PHY powered on imx8mm-verdin to avoid kernel crash.
- Fix configuration of i.MX8MM pad UART1_DTE_RX.
* tag 'imx-fixes-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
arm64: dts: imx8mm-verdin: Do not power down eth-phy
MAINTAINERS: match freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX
arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode
arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts'
arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC
Link: https://lore.kernel.org/r/20230130003614.GP20713@T480
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently, when resetting the USB modem via AT commands, the modem is
no longer re-connected.
This problem is caused by the incorrect description of the USB_OTG2_OC
pad. It should have pull-up enabled, hysteresis enabled and the
property 'over-current-active-low' should be passed.
With this change, the USB modem can be successfully re-connected
after a reset.
Cc: stable@vger.kernel.org
Fixes: 9ac0ae97e3 ("ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
mvebu fixes for 6.2 (part 1)
Fix regression for gpio support on Armada 38x and Armada 38x
Fix address for UART1 on AC5/AC5X
* tag 'mvebu-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: AC5/AC5X: Fix address for UART1
Revert "ARM: dts: armada-39x: Fix compatible string for gpios"
Revert "ARM: dts: armada-38x: Fix compatible string for gpios"
Link: https://lore.kernel.org/r/87mt6mg08k.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit d10886a4e6.
If compatible = "marvell,armadaxp-gpio", the reg property requires a
second (address, size) pair, which points to the per-CPU interrupt
registers <0x18800 0x30> / <0x18840 0x30>.
Furthermore:
Commit 5f79c651e8 explains very well, why the gpio-mvebu driver does not
work reliably with per-CPU interrupts.
Commit 988c8c0cd0 deprecates compatible = marvell,armadaxp-gpio for this
reason.
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This reverts commit c4de4667f1, which causes
a regression on Turris Omnia (Armada 385): GPIO interrupts cease to work,
ending up in the DSA switch being non-functional.
The blamed commit is incorrect in the first place:
If compatible = "marvell,armadaxp-gpio", the second (address, size) pair
of the reg property must to point to the per-CPU interrupt registers
<0x18800 0x30> / <0x18840 0x30>, and not to the blink enable registers
<0x181c0 0x08> / <0x181c8 0x08>.
But even fixing that leaves the GPIO interrupts broken on the Omnia.
Furthermore:
Commit 5f79c651e8 explains very well, why the gpio-mvebu driver does not
work reliably with per-CPU interrupts.
Commit 988c8c0cd0 deprecates compatible = marvell,armadaxp-gpio for this
reason.
Fixes: c4de4667f1 ("ARM: dts: armada-38x: Fix compatible string for gpios")
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Link: https://lore.kernel.org/r/f24474e70c1a4e9692bd596ef6d97ceda9511245.camel@gmail.com/
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
"make dtbs_check":
arch/arm/boot/dts/vf610-zii-dev-rev-b.dtb: tca9548@70: $nodename:0: 'tca9548@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm/boot/dts/vf610-zii-dev-rev-b.dtb: tca9548@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4' were unexpected)
From schema: /scratch/geert/linux/linux-renesas/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA9548 nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"make dtbs_check":
arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4', 'i2c@5', 'i2c@6', 'i2c@7' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
Fix this by renaming the PCA9547 node to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The following build warning is seen when running:
make dtbs_check DT_SCHEMA_FILES=fsl-imx-uart.yaml
arch/arm/boot/dts/imx6dl-gw560x.dtb: serial@2020000: rts-gpios: False schema does not allow [[20, 1, 0]]
From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
The imx6qdl-gw560x board does not expose the UART RTS and CTS
as native UART pins, so 'uart-has-rtscts' should not be used.
Using 'uart-has-rtscts' with 'rts-gpios' is an invalid combination
detected by serial.yaml.
Fix the problem by removing the incorrect 'uart-has-rtscts' property.
Fixes: b8a559feff ("ARM: dts: imx: add Gateworks Ventana GW5600 support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
'clock_frequency' is not a valid property.
Use the correct 'clock-frequency' instead.
Fixes: 8b646cfb84 ("ARM: dts: imx7d-pico: Add support for the dwarf baseboard")
Fixes: 6418fd9241 ("ARM: dts: imx7d-pico: Add support for the nymph baseboard")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
'clock_frequency' is not a valid property.
Use the correct 'clock-frequency' instead.
Fixes: 47246fafef ("ARM: dts: imx6ul-pico: Add support for the dwarf baseboard")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull ARM SoC fixes from Arnd Bergmann:
"These are a couple of build fixes from randconfig testing, plus a set
of Mediatek SoC specific fixes, all trivial"
* tag 'soc-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: tegra: fix CPU_BIG_ENDIAN dependencies
ARM: disallow pre-ARMv5 builds with ld.lld
ARM: pxa: fix building with clang
MAINTAINERS: add related dts to IXP4xx
ARM: dts: spear: drop 0x from unit address
arm64: dts: mt8183: Fix Mali GPU clock
arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon
soc: mediatek: pm-domains: Fix the power glitch issue
Pull kernel hardening updates from Kees Cook:
- Convert flexible array members, fix -Wstringop-overflow warnings, and
fix KCFI function type mismatches that went ignored by maintainers
(Gustavo A. R. Silva, Nathan Chancellor, Kees Cook)
- Remove the remaining side-effect users of ksize() by converting
dma-buf, btrfs, and coredump to using kmalloc_size_roundup(), add
more __alloc_size attributes, and introduce full testing of all
allocator functions. Finally remove the ksize() side-effect so that
each allocation-aware checker can finally behave without exceptions
- Introduce oops_limit (default 10,000) and warn_limit (default off) to
provide greater granularity of control for panic_on_oops and
panic_on_warn (Jann Horn, Kees Cook)
- Introduce overflows_type() and castable_to_type() helpers for cleaner
overflow checking
- Improve code generation for strscpy() and update str*() kern-doc
- Convert strscpy and sigphash tests to KUnit, and expand memcpy tests
- Always use a non-NULL argument for prepare_kernel_cred()
- Disable structleak plugin in FORTIFY KUnit test (Anders Roxell)
- Adjust orphan linker section checking to respect CONFIG_WERROR (Xin
Li)
- Make sure siginfo is cleared for forced SIGKILL (haifeng.xu)
- Fix um vs FORTIFY warnings for always-NULL arguments
* tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (31 commits)
ksmbd: replace one-element arrays with flexible-array members
hpet: Replace one-element array with flexible-array member
um: virt-pci: Avoid GCC non-NULL warning
signal: Initialize the info in ksignal
lib: fortify_kunit: build without structleak plugin
panic: Expose "warn_count" to sysfs
panic: Introduce warn_limit
panic: Consolidate open-coded panic_on_warn checks
exit: Allow oops_limit to be disabled
exit: Expose "oops_count" to sysfs
exit: Put an upper limit on how often we can oops
panic: Separate sysctl logic from CONFIG_SMP
mm/pgtable: Fix multiple -Wstringop-overflow warnings
mm: Make ksize() a reporting-only function
kunit/fortify: Validate __alloc_size attribute results
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
driver core: Add __alloc_size hint to devm allocators
overflow: Introduce overflows_type() and castable_to_type()
coredump: Proactively round up to kmalloc bucket size
...
Pull networking updates from Paolo Abeni:
"Core:
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations
- Add inet drop monitor support
- A few GRO performance improvements
- Add infrastructure for atomic dev stats, addressing long standing
data races
- De-duplicate common code between OVS and conntrack offloading
infrastructure
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up the
workload with the number of available CPUs
- Add the helper support for connection-tracking OVS offload
BPF:
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF
- Make cgroup local storage available to non-cgroup attached BPF
programs
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers
- A relevant bunch of BPF verifier fixes and improvements
- Veristat tool improvements to support custom filtering, sorting,
and replay of results
- Add LLVM disassembler as default library for dumping JITed code
- Lots of new BPF documentation for various BPF maps
- Add bpf_rcu_read_{,un}lock() support for sleepable programs
- Add RCU grace period chaining to BPF to wait for the completion of
access from both sleepable and non-sleepable BPF programs
- Add support storing struct task_struct objects as kptrs in maps
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions
Protocols:
- TCP: implement Protective Load Balancing across switch links
- TCP: allow dynamically disabling TCP-MD5 static key, reverting back
to fast[er]-path
- UDP: Introduce optional per-netns hash lookup table
- IPv6: simplify and cleanup sockets disposal
- Netlink: support different type policies for each generic netlink
operation
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support
- MPTCP: add netlink notification support for listener sockets events
- SCTP: add VRF support, allowing sctp sockets binding to VRF devices
- Add bridging MAC Authentication Bypass (MAB) support
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios
- More work for Wi-Fi 7 support, comprising conversion of all the
existing drivers to internal TX queue usage
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading
- IPSec: extended ack support for more descriptive XFRM error
reporting
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking
- IEEE 802154: synchronous send frame and extended filtering support,
initial support for scanning available 15.4 networks
- Tun: bump the link speed from 10Mbps to 10Gbps
- Tun/VirtioNet: implement UDP segmentation offload support
Driver API:
- PHY/SFP: improve power level switching between standard level 1 and
the higher power levels
- New API for netdev <-> devlink_port linkage
- PTP: convert existing drivers to new frequency adjustment
implementation
- DSA: add support for rx offloading
- Autoload DSA tagging driver when dynamically changing protocol
- Add new PCP and APPTRUST attributes to Data Center Bridging
- Add configuration support for 800Gbps link speed
- Add devlink port function attribute to enable/disable RoCE and
migratable
- Extend devlink-rate to support strict prioriry and weighted fair
queuing
- Add devlink support to directly reading from region memory
- New device tree helper to fetch MAC address from nvmem
- New big TCP helper to simplify temporary header stripping
New hardware / drivers:
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches
- Marvel Prestera AC5X Ethernet Switch
- WangXun 10 Gigabit NIC
- Motorcomm yt8521 Gigabit Ethernet
- Microchip ksz9563 Gigabit Ethernet Switch
- Microsoft Azure Network Adapter
- Linux Automation 10Base-T1L adapter
- PHY:
- Aquantia AQR112 and AQR412
- Motorcomm YT8531S
- PTP:
- Orolia ART-CARD
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets
- Realtek RTL8852BE and RTL8723DS
- Cypress.CYW4373A0 WiFi + Bluetooth combo device
Drivers:
- CAN:
- gs_usb: bus error reporting support
- kvaser_usb: listen only and bus error reporting support
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping
- implement devlink-rate support
- support direct read from memory
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate
- Support for enhanced events compression
- extend H/W offload packet manipulation capabilities
- implement IPSec packet offload mode
- nVidia/Mellanox (mlx4):
- better big TCP support
- Netronome Ethernet NICs (nfp):
- IPsec offload support
- add support for multicast filter
- Broadcom:
- RSS and PTP support improvements
- AMD/SolarFlare:
- netlink extened ack improvements
- add basic flower matches to offload, and related stats
- Virtual NICs:
- ibmvnic: introduce affinity hint support
- small / embedded:
- FreeScale fec: add initial XDP support
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
- TI am65-cpsw: add suspend/resume support
- Mediatek MT7986: add RX wireless wthernet dispatch support
- Realtek 8169: enable GRO software interrupt coalescing per
default
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support
- add ip6gre support
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support
- enable flow offload support
- Renesas:
- add rswitch R-Car Gen4 gPTP support
- Microchip (lan966x):
- add full XDP support
- add TC H/W offload via VCAP
- enable PTP on bridge interfaces
- Microchip (ksz8):
- add MTU support for KSZ8 series
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support
- add ack signal support
- enable coredump support
- remain_on_channel support
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
- RealTek WiFi (rtw89):
- new dynamic header firmware format support
- wake-over-WLAN support"
* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
ipvs: fix type warning in do_div() on 32 bit
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
net: ipa: add IPA v4.7 support
dt-bindings: net: qcom,ipa: Add SM6350 compatible
bnxt: Use generic HBH removal helper in tx path
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
selftests: forwarding: Add bridge MDB test
selftests: forwarding: Rename bridge_mdb test
bridge: mcast: Support replacement of MDB port group entries
bridge: mcast: Allow user space to specify MDB entry routing protocol
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
bridge: mcast: Add support for (*, G) with a source list and filter mode
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
bridge: mcast: Add a flag for user installed source entries
bridge: mcast: Expose __br_multicast_del_group_src()
bridge: mcast: Expose br_multicast_new_group_src()
bridge: mcast: Add a centralized error path
bridge: mcast: Place netlink policy before validation functions
bridge: mcast: Split (*, G) and (S, G) addition into different functions
bridge: mcast: Do not derive entry type from its filter mode
...
Pull ARM updates from Russell King:
- update unwinder to cope with module PLTs
- enable UBSAN on ARM
- improve kernel fault message
- update UEFI runtime page tables dump
- avoid clang's __aeabi_uldivmod generated in NWFPE code
- disable FIQs on CPU shutdown paths
- update XOR register usage
- a number of build updates (using .arch, thread pointer, removal of
lazy evaluation in Makefile)
- conversion of stacktrace code to stackwalk
- findbit assembly updates
- hwcap feature updates for ARMv8 CPUs
- instruction dump updates for big-endian platforms
- support for function error injection
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits)
ARM: 9279/1: support function error injection
ARM: 9277/1: Make the dumped instructions are consistent with the disassembled ones
ARM: 9276/1: Refactor dump_instr()
ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA
ARM: 9274/1: Add hwcap for Speculative Store Bypassing Safe
ARM: 9273/1: Add hwcap for Speculation Barrier(SB)
ARM: 9272/1: vfp: Add hwcap for FEAT_AA32I8MM
ARM: 9271/1: vfp: Add hwcap for FEAT_AA32BF16
ARM: 9270/1: vfp: Add hwcap for FEAT_FHM
ARM: 9269/1: vfp: Add hwcap for FEAT_DotProd
ARM: 9268/1: vfp: Add hwcap FPHP and ASIMDHP for FEAT_FP16
ARM: 9267/1: Define Armv8 registers in AArch32 state
ARM: findbit: add unwinder information
ARM: findbit: operate by words
ARM: findbit: convert to macros
ARM: findbit: provide more efficient ARMv7 implementation
ARM: findbit: document ARMv5 bit offset calculation
ARM: 9259/1: stacktrace: Convert stacktrace to generic ARCH_STACKWALK
ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code
ARM: 9265/1: pass -march= only to compiler
...
Pull input updates from Dmitry Torokhov:
- a new driver for Cypress Generation 5 touchscreens
- a new driver for Hynitron cstxxx touchscreens
- a new driver for Himax hx83112b touchscreen
- I2C input devices have been converted to use i2c's probe_new()
- a large number of input devices are now using
DEFINE_SIMPLE_DEV_PM_OPS and pm_sleep_ptr() and no longer use
__maybe_unused annotations
- improvements to msg2638 touchscreen driver to also support msg2138
- conversion of several input deevine bindings to yaml/DT schema
- changes to select touch drivers to move handling of wake irqs to the
PM core
- other assorted fixes and improvements.
* tag 'input-for-v6.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (165 commits)
Input: elants_i2c - delay longer with reset asserted
dt-bindings: input: Convert ti,drv260x to DT schema
dt-bindings: input: gpio-beeper: Convert to yaml schema
Input: pxspad - fix unused data warning when force feedback not enabled
Input: lpc32xx - allow building with COMPILE_TEST
Input: nomadik-ske-keypad - allow building with COMPILE_TEST
Input: pxa27xx-keypad - allow build with COMPILE_TEST
Input: spear-keyboard - improve build coverage using COMPILE_TEST
Input: tegra-kbc - allow build with COMPILE_TEST
Input: tegra-kbc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: tca6416-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: tc3589x - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: st-keyscan - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: sh-keysc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: qt1070 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: pxa27x_keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: pmic8xxx-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: nomadik-ske-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: mcs-touchkey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: max7359-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
...
Pull media updates from Mauro Carvalho Chehab:
- DVB core changes to avoid refcount troubles and UAF
- DVB API/core has gained support for DVB-C2 and DVB-S2X
- New sensor drivers: ov08x40, ov4689.c, st-vgxy61 and tc358746.c
- Removal of an unused sensor driver: s5k4ecgx
- Move microchip_csi2dc to a new directory, named after the
manufacturer
- Add media controller support to Microship drivers
- Old Atmel/Microship drivers that don't use media controler got moved
to staging
- New drivers added for Renesas RZ/G2L CRU and MIPI CSI-2 support
- Allwinner A31 camera sensor driver code was now split into a bridge
and a separate processor driver
- Added a virtual stateless decoder driver in order to test core
support for stateless drivers and test userspace apps using it
- removed platform-based support for ov9650, as this is not used
anymore
- atomisp now uses videobuf2 and supports normal mmap mode
- the imx7-media-csi driver got promoted from staging
- rcar-vin driver has gained support for gen3 UDS (Up Down Scaler)
- most i2c drivers now use I2C .probe_new() kAPI
- lots of drivers fixes, cleanups and improvements
* tag 'media/v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits)
media: s5c73m3: Switch to GPIO descriptors
media: i2c: s5k5baf: switch to using gpiod API
media: i2c: s5k6a3: switch to using gpiod API
media: imx: remove code for non-existing config IMX_GPT_ICAP
media: si470x: Fix use-after-free in si470x_int_in_callback()
media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies
media: coda: Add check for kmalloc
media: coda: Add check for dcoda_iram_alloc
dt-bindings: media: s5c73m3: Fix reset-gpio descriptor
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
media: s5k4ecgx: Delete driver
media: s5k4ecgx: Switch to GPIO descriptors
media: Switch to use dev_err_probe() helper
headers: Remove some left-over license text in include/uapi/linux/v4l2-*
headers: Remove some left-over license text in include/uapi/linux/dvb/
media: usb: pwc-uncompress: Use flex array destination for memcpy()
media: s5p-mfc: Fix to handle reference queue during finishing
media: s5p-mfc: Clear workbit to handle error condition
media: s5p-mfc: Fix in register read and write for H264
media: imx: Use get_mbus_config instead of parsing upstream DT endpoints
...
Pull ARM SoC DT updates from Arnd Bergmann:
"The devicetree changes contain exactly 1000 non-merge changesets,
including a number of new arm64 SoC variants from Qualcomm and Apple,
as well as the Renesas r9a07g043f/u chip in both arm64 and riscv
variants.
While we have occasionally merged support for non-arm SoCs in the
past, this is now the normal path for riscv devicetree files.
The most notable changes, by SoC platform, are:
- The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M1 Ultra) chips
now have initial support. This is particularly nice as I am typing
this on a T6002 Mac Studio with only a small number of driver
patches.
- Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662),
SM4250 (Snapdragon 460), SM6375 (Snapdragon 695), SDM670
(Snapdragon 670), MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon
650) are all mobile phone chips that are closely related to others
we already support.
Adding those helps support more phones and we add several models
from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3,
3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and
Google (Pixel 3a).
There are also new variants of the Herobrine and Trogdor chromebook
motherboards. SA8540P is an automotive SoC used in the Qdrive-3
development platform
- Rockchips gains no new SoC variants, but a lot of new boards: three
mobile gaming systems based on RK3326 Odroid-Go/rg351 family, two
more Anbernic gaming systems based on RK3566 and a number of other
RK356x based single-board computers.
- Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as
the newly added RZ/Five is based on the same design, this now gets
reorganized in order to share most of the dts description between
the two and add the RZ/Five SMARC EVK board support.
Aside from that, there are the usual changes all over the tree:
- New boards on other platforms contain two ASpeed BMC users, two
Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based
Kobo Aura2 ebook reader, two i.MX8 based development boards, two
Uniphier Pro5 development boards, the STM32MP1 testbench board from
DHCOR, the TI K3 based BeagleBone AI-64 board, and the Mediatek
Helio X10 based Sony Xperia M5 phone.
- The Starfive JH7100 source gets reorganized in order to support the
VisionFive V1 board.
- Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168, TI,
ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton,
Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500,
spear, ... The treewide cleanups now have a lot of fixes for cache
nodes and other binding violoations.
- Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm and
Renesas platforms, adding a lot more on-chip device support
- A rework of the way that DTB overlays are built"
* tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (979 commits)
arm64: dts: apple: t6002: Fix GPU power domains
arm64: dts: apple: t600x-pmgr: Fix search & replace typo
arm64: dts: apple: Add t8103 L1/L2 cache properties and nodes
arm64: dts: apple: Rename dart-sio* to sio-dart*
arch: arm64: apple: t600x: Use standard "iommu" node name
arch: arm64: apple: t8103: Use standard "iommu" node name
ARM: dts: socfpga: Fix pca9548 i2c-mux node name
dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define
dt-bindings: iio: adc: qcom,spmi-vadc: extend example
arm64: dts: qcom: sc8280xp: fix UFS DMA coherency
arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie
arm64: dts: qcom: sm8250-sony-xperia-edo: fix no-mmc property for SDHCI
arm64: dts: qcom: sdm845-sony-xperia-tama: fix no-mmc property for SDHCI
arm64: dts: qcom: sda660-inforce-ifc6560: fix no-mmc property for SDHCI
arm64: dts: qcom: sa8155p-adp: fix no-mmc property for SDHCI
arm64: dts: qcom: qrb5165-rb: fix no-mmc property for SDHCI
arm64: dts: qcom: sm8450: align MMC node names with dtschema
arm64: dts: qcom: sc7180-trogdor: use generic node names
arm64: dts: qcom: sm8450-hdk: add sound support
arm64: dts: qcom: sm8450: add Soundwire and LPASS
...
Pull ARM SoC fix from Arnd Bergmann:
"One more last minute revert for a boot regression that was found on
the popular colibri-imx7"
* tag 'soc-fixes-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
Revert "ARM: dts: imx7: Fix NAND controller size-cells"
More Qualcomm DTS updates for 6.2
This introduces support for the OnePlus One, on MSM8974Pro, and properly
marks other Pro devices as compatible thereof. Also on MSM8974, the
description of USB devices and their PHYs are cleaned up.
On the binding side compatibles for recently added ARM and ARM64 boards
are added.
* tag 'qcom-dts-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (102 commits)
dt-bindings: arm: qcom: Add zombie
ARM: dts: qcom: msm8974: Add OnePlus One
dt-bindings: arm: qcom: Document oneplus,bacon device
ARM: dts: qcom: msm8974: clean up USB nodes
arm: dts: qcom: use qcom,msm8974pro for pro devices
dt-bindings: arm: qcom: split MSM8974 Pro and MSM8974
ARM: dts: qcom: align LED node names with dtschema
dt-bindings: arm: qcom: Document additional sa8540p device
dt-bindings: arm: qcom: Add Xperia 5 IV (PDX224)
dt-bindings: arm: qcom: Document msm8956 and msm8976 SoC and devices
dt-bindings: arm: add xiaomi,sagit board based on msm8998 chip
dt-bindings: arm: qcom: add sdm670 and pixel 3a compatible
dt-bindings: arm: cpus: add qcom kryo 360 compatible
ARM: dts: qcom-msm8960-cdp: align TLMM pin configuration with DT schema
ARM: dts: qcom-msm8960: use define for interrupt constants
dt-bindings: arm: qcom: Document SM6375 & Xperia 10 IV
ARM: dts: qcom-apq8060: align TLMM pin configuration with DT schema
ARM: dts: qcom: msm8226: Add MMCC node
dt-bindings: arm: qcom: Separate LTE/WIFI SKU for sc7280-evoker
dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards
...
Link: https://lore.kernel.org/r/20221207153201.3233015-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SoCFPGA dts updates for v6.2, part 2
- Fix dtschema for LED node
- Fix dtschema for i2c-mux
* tag 'socfpga_dts_updates_for_v6.2_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: Fix pca9548 i2c-mux node name
ARM: dts: socfpga: align LED node names with dtschema
arm64: dts: altera: align LED node names with dtschema
Link: https://lore.kernel.org/r/20221206214006.590562-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
"make dtbs_check":
arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dtb: i2cswitch@70: $nodename:0: 'i2cswitch@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dtb: i2cswitch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4', 'i2c@5', 'i2c@6', 'i2c@7' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
Fix this by renaming the PCA9548 node to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Rename "otg" label to "usb" to group it with other usb nodes and also
because "usb" makes more sense for a USB controller.
And now we can also better use the usb_hsX_phy labels instead of having
the ulpi -> phy@X structure in every dts.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221128171623.825572-1-luca@z3ntu.xyz
Minor improvements in ARM DTS for v6.2, part two
Few cleanups which should not have any functional impact:
1. Trim addresses in "reg" to 8 digits.
2. Align LED node names with dtschema.
3. omap: echo: Use preferred enable-gpios property for LP5523 LED.
* tag 'dt-cleanup-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: sti: align LED node names with dtschema
ARM: dts: am335x: align LED node names with dtschema
ARM: dts: omap: echo: use preferred enable-gpios for LP5523 LED
ARM: dts: omap: align LED node names with dtschema
ARM: dts: logicpd: align LED node names with dtschema
ARM: dts: lpc32xx: trim addresses to 8 digits
ARM: dts: imx: trim addresses to 8 digits
ARM: dts: omap: trim addresses to 8 digits
Link: https://lore.kernel.org/r/20221204082909.5649-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
