Jonathan writes:
Second set of new device support, cleanups etc for IIO/Counters in the 5.9 cycle
There are two merge commits in here of immutable branches that may
also be picked up through other trees (clocksource and input)
I've put a few late breaking fixes in here that aren't worth rushing
in before the merge window. One major fix for an issue introduced
in the last set that can result in devices not having their parent set.
This set is dominated by W=1 cleanups from Lee Jones. I won't list them
all separately. They are mostly:
* Kernel doc fixes
* Unused variable removal.
* Suppression of unused stuff that is static in headers.
Counters subsystem
* atmel-tcb
- New counter driver after various cleanups of existing tcb code and bindings.
Device support
* stk311
- Trivial addition of ID for STK311-X variant.
yaml conversions
* kionix,kxsd9
* ti,ads8688
Features
* jz47xx
- Add support for touch screen channels. In this particular case the
boards in question actually wire a joystick to them so we want them
as simple voltage channels. The joystick driver will probably go
via the input tree.
Cleanups + fixes
* core
- A rebase issue in recent major refactoring dropped the assignment of
of the device parent in the core. Put it back.
* ad5592r
- Fix unbalanced mutex unlocks in *_read_raw()
* ad7124
- Move chip ID and name to the chip_info table plus add a read of the
revision register to check the device is working during probe.
* ad7192
- Ridy up ordering to put the match table near the end fo the file where it
is used.
* lsm6dsx
- Reset the hardware timestamp after a resume to avoid an issue with
missaligned timestamps after suspend.
* jz47xx
- Error checks on clk_enable() calls.
- xlate callaback to find channel index.
- Use separate chan_spec arrays for different variants rather than
parts of a single list. Simplifies code.
* tag 'iio-for-5.9b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (69 commits)
iio: imu: st_lsm6dsx: reset hw ts after resume
iio: dac: ad5592r: fix unbalanced mutex unlocks in ad5592r_read_raw()
iio: core: fix/re-introduce back parent assignment
iio: adc: ad7124: move chip ID & name on the chip_info table
counter: Add microchip TCB capture counter
dt-bindings: counter: microchip-tcb-capture counter
dt-bindings: microchip: atmel,at91rm9200-tcb: add sama5d2 compatible
dt-bindings: atmel-tcb: convert bindings to json-schema
ARM: at91: add atmel tcb capabilities
IIO: Ingenic JZ47xx: Add touchscreen mode.
dt-bindings: iio/adc: Add touchscreen idx for JZ47xx SoC ADC
iio/adc: ingenic: Retrieve channels list from soc data struct
IIO: Ingenic JZ47xx: Add xlate cb to retrieve correct channel idx
IIO: Ingenic JZ47xx: Error check clk_enable calls.
dt-bindings: iio: ti,ads8688 yaml conversion
iio: light: stk3310: add chip id for STK3311-X variant
dt-bindings: iio: accel: kionix,kxsd9 yaml conversion.
iio: adc: ad7192: move ad7192_of_match table closer to the end of the file
iio: adc: rockchip_saradc: Demote seemingly unintentional kerneldoc header
iio: imu: st_lsm6dsx: st_lsm6dsx: Mark 'st_lsm6dsx_accel_ext_info' as __maybe_unused
...
Reset hw time samples generator after system resume in order to avoid
disalignment between system and device time reference since FIFO
batching and time samples generator are disabled during suspend.
Fixes: 213451076b ("iio: imu: st_lsm6dsx: add hw timestamp support")
Tested-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are 2 exit paths where the lock isn't held, but try to unlock the
mutex when exiting. In these places we should just return from the
function.
A neater approach would be to cleanup the ad5592r_read_raw(), but that
would make this patch more difficult to backport to stable versions.
Fixes 56ca9db862: ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Reported-by: Charles Stanhope <charles.stanhope@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This was introduced initially via commit 78289b4a58 ("iio: core: pass
parent device as parameter during allocation"), but was accidentally
removed via commit 6d4ebd565d ("iio: core: wrap IIO device into an
iio_dev_opaque object").
This looks like a rebase gone wrong, and ends up breaking devicetree
bindings of IIO clients.
This change adds back the parent assignment.
Fixes 6d4ebd565d: ("iio: core: wrap IIO device into an iio_dev_opaque object")
Reported-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Tested-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change does the following:
* removes the SPI device table in favor of the OF device table
* adds 'name' && 'chip_id' fields to chip_info
* implements chip ID & silicon revision checking; the device ID for
AD7124-4 is 0x0, so just checking that value can be useless;
but at least the silicon revision isn't 0, so a non-zero value can be
used to check that "a" device is on the SPI bus; it's probably the best
way to narrow it down to one of the 2 AD7124 chip IDs
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoid getting into a WARNING as below by checking, while in the prepare
state of the transactional operation, if there is space for a new VLAN.
If we reached the maximum number, return an appropriate error.
[ 6503.657564] eth3: Commit of object (id=1) failed.
[ 6503.657588] WARNING: CPU: 2 PID: 17144 at net/switchdev/switchdev.c:277 switchdev_port_obj_add_now+0xcc/0x110
...
[ 6503.657628] x1 : 70887ce26695c500 x0 : 0000000000000000
[ 6503.657630] Call trace:
[ 6503.657633] switchdev_port_obj_add_now+0xcc/0x110
[ 6503.657635] switchdev_port_obj_add+0x40/0xc0
[ 6503.657638] br_switchdev_port_vlan_add+0x50/0x78
[ 6503.657640] __vlan_add+0x2dc/0x758
[ 6503.657642] nbp_vlan_add+0xc0/0x180
[ 6503.657644] br_vlan_info.isra.0+0x68/0x128
[ 6503.657646] br_process_vlan_info+0x224/0x2f8
[ 6503.657647] br_afspec+0x158/0x188
[ 6503.657649] br_setlink+0x1a4/0x290
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20200721091919.20394-7-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should destroy the switch workqueue only after deregistering the
switchdev notifiers. Without this fix, we could end up with switchdev
notifications on a draining workqueue and also with a lock up since the
netdevice reference count is increased (in port_switchdev_event) and not
decreased ever (since the workqueue did not run).
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20200721091919.20394-5-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since now we have a notifier block for each DPSW instance probed, we
have to also check that the netdev is indeed connected to the notifier
received. Without this, we end up with the same switchdev callback being
executed multiple times (because it would be received by all notifier
blocks, not just the one intended to).
Also, move the function higher in the source file because it will be
used in later patches from multiple places.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20200721091919.20394-2-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This drivers allows to use the capture mode of the Timer Counter Block
hardware block available in Microchip SoCs through the counter subsystem.
Two functions of the counter are supported for the moment: period
capture and quadrature decoder. The latter is only supported by the
SAMA5 series of SoCs.
For the period capture mode a basic setup has been chosen that will
reset the counter each time the period is actually reached. Of course
the device offers much more possibilities.
For quadrature mode, both channel 0 and 1 must be configured even if we
only capture the position (no revolution/rotation).
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Describe the devicetree binding for the Microchip TCB module.
Each counter blocks exposes three independent counters.
However, when configured in quadrature decoder, both channel <0> and <1>
are required for speed/position and rotation capture (yet only the
position is captured).
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The SADC component in JZ47xx SoCs provides support for touchscreen
operations (pen position and pen down pressure) in single-ended and
differential modes.
The touchscreen component of SADC takes a significant time to stabilize
after first receiving the clock and a delay of 50ms has been empirically
proven to be a safe value before data sampling can begin.
Of the known hardware to use this controller, GCW Zero and Anbernic RG-350
utilize the touchscreen mode by having their joystick(s) attached to the
X/Y positive/negative input pins.
JZ4770 and later SoCs introduce a low-level command feature. With it, up
to 32 commands can be programmed, each one corresponding to a sampling
job. It allows to change the low-voltage reference, the high-voltage
reference, have them connected to VCC, GND, or one of the X-/X+ or Y-/Y+
pins.
This patch introduces support for 6 stream-capable channels:
- channel #0 samples X+/GND
- channel #1 samples Y+/GND
- channel #2 samples X-/GND
- channel #3 samples Y-/GND
- channel #4 samples X+/X-
- channel #5 samples Y+/Y-
Being able to sample X-/GND and Y-/GND is useful on some devices, where
one joystick is connected to the X+/Y+ pins, and a second joystick is
connected to the X-/Y- pins.
All the boards which probe this driver have the interrupt provided from
Device Tree, with no need to handle a case where the IRQ was not provided.
Co-developed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of having one array of struct iio_chan_spec for all SoCs, and
have some SoCs remove the last item of the array as they can't use it,
have each SoC define its array of supported channels.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Provide an of_xlate callback in order to retrieve the correct channel
specifier index from the IIO channels array.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce error checks for the clk_enable calls used in this driver.
As part of the changes, move clk_enable/clk_disable calls out of
ingenic_adc_set_config and into respective logic of its callers.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719123244.58718-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fairly simple binding. Most of the changes were filling in information
not previously found in the binding. I dropped the previous explicit
mention of spi-max-frequency as that is covered by the generic SPI
binding.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Rob Herring <robh@kernel.org>
The STK3311 chip has a variant called STK3311-X, which has a different
chip id of 0x12.
Add the chip id to the driver.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert and flesh out a bit the binding docs for this simple 3 axis
accelerometer.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
The change is more cosmetic. There is no need to reference this table in
the probe function since 'of_device_get_match_data' is used, which obtains
this information from the driver object.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is the only use of kerneldoc in the source file and no
descriptions are provided.
Fixes the following W=1 kernel build warning(s):
drivers/iio/adc/rockchip_saradc.c:190: warning: Function parameter or member 'reset' not described in 'rockchip_saradc_reset_controller'
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
It doesn't make sense to move it into '*core*' as it's co-located with
other, similar definitions which are used in multiple locations.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c:17:
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h:497:44: warning: ‘st_lsm6dsx_accel_ext_info’ defined but not used [-Wunused-const-variable=]
497 | static const struct iio_chan_spec_ext_info st_lsm6dsx_accel_ext_info[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c:17:
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h:497:44: warning: ‘st_lsm6dsx_accel_ext_info’ defined but not used [-Wunused-const-variable=]
497 | static const struct iio_chan_spec_ext_info st_lsm6dsx_accel_ext_info[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c:16:
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h:497:44: warning: ‘st_lsm6dsx_accel_ext_info’ defined but not used [-Wunused-const-variable=]
497 | static const struct iio_chan_spec_ext_info st_lsm6dsx_accel_ext_info[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:174: warning: Function parameter or member 'hw' not described in 'st_lsm6dsx_shub_read_output'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:174: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_read_output'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:174: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_read_output'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'hw' not described in 'st_lsm6dsx_shub_write_reg'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'addr' not described in 'st_lsm6dsx_shub_write_reg'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_write_reg'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_write_reg'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'sensor' not described in 'st_lsm6dsx_shub_read'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'addr' not described in 'st_lsm6dsx_shub_read'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_read'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_read'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'sensor' not described in 'st_lsm6dsx_shub_write'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'addr' not described in 'st_lsm6dsx_shub_write'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_write'
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_write'
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kerneldoc is only suitable for documenting functions and struct/enums.
Fixes the following W=1 kernel build warning(s):
drivers/iio/adc/qcom-pm8xxx-xoadc.c:133: warning: Excess function parameter 'PM8XXX_CHANNEL_INTERNAL' description in 'PM8XXX_CHANNEL_INTERNAL'
drivers/iio/adc/qcom-pm8xxx-xoadc.c:133: warning: Excess function parameter 'PM8XXX_CHANNEL_125V' description in 'PM8XXX_CHANNEL_INTERNAL'
drivers/iio/adc/qcom-pm8xxx-xoadc.c:133: warning: Excess function parameter 'PM8XXX_CHANNEL_INTERNAL_2' description in 'PM8XXX_CHANNEL_INTERNAL'
drivers/iio/adc/qcom-pm8xxx-xoadc.c:133: warning: Excess function parameter 'PM8XXX_CHANNEL_MUXOFF' description in 'PM8XXX_CHANNEL_INTERNAL'
drivers/iio/adc/qcom-pm8xxx-xoadc.c:412: warning: Function parameter or member 'variant' not described in 'pm8xxx_xoadc'
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is the only use of kerneldoc in the source file and no
descriptions are provided.
Fixes the following W=1 kernel build warning(s):
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c:118: warning: Function parameter or member 'irq' not described in 'inv_mpu6050_read_fifo'
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c:118: warning: Function parameter or member 'p' not described in 'inv_mpu6050_read_fifo'
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:444: warning: Function parameter or member 'st' not described in 'inv_mpu6050_set_lpf_regs'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:444: warning: Function parameter or member 'val' not described in 'inv_mpu6050_set_lpf_regs'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:480: warning: Function parameter or member 'indio_dev' not described in 'inv_mpu6050_init_config'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:862: warning: Function parameter or member 'st' not described in 'inv_mpu6050_set_lpf'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:862: warning: Function parameter or member 'rate' not described in 'inv_mpu6050_set_lpf'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'dev' not described in 'inv_mpu6050_fifo_rate_store'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'attr' not described in 'inv_mpu6050_fifo_rate_store'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'buf' not described in 'inv_mpu6050_fifo_rate_store'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'count' not described in 'inv_mpu6050_fifo_rate_store'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:954: warning: Function parameter or member 'dev' not described in 'inv_fifo_rate_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:954: warning: Function parameter or member 'attr' not described in 'inv_fifo_rate_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:954: warning: Function parameter or member 'buf' not described in 'inv_fifo_rate_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:975: warning: Function parameter or member 'dev' not described in 'inv_attr_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:975: warning: Function parameter or member 'attr' not described in 'inv_attr_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:975: warning: Function parameter or member 'buf' not described in 'inv_attr_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:1282: warning: Function parameter or member 'st' not described in 'inv_check_and_setup_chip'
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Very few of the struct attributes have been documented here.
Fixes the following W=1 kernel build warning(s):
drivers/iio/adc/palmas_gpadc.c:114: warning: Function parameter or member 'dev' not described in 'palmas_gpadc'
drivers/iio/adc/palmas_gpadc.c:114: warning: Function parameter or member 'palmas' not described in 'palmas_gpadc'
drivers/iio/adc/palmas_gpadc.c:114: warning: Function parameter or member 'irq' not described in 'palmas_gpadc'
drivers/iio/adc/palmas_gpadc.c:114: warning: Function parameter or member 'irq_auto_0' not described in 'palmas_gpadc'
drivers/iio/adc/palmas_gpadc.c:114: warning: Function parameter or member 'irq_auto_1' not described in 'palmas_gpadc'
drivers/iio/adc/palmas_gpadc.c:114: warning: Function parameter or member 'adc_info' not described in 'palmas_gpadc'
drivers/iio/adc/palmas_gpadc.c:114: warning: Function parameter or member 'conv_completion' not described in 'palmas_gpadc'
drivers/iio/adc/palmas_gpadc.c:114: warning: Function parameter or member 'wakeup1_data' not described in 'palmas_gpadc'
drivers/iio/adc/palmas_gpadc.c:114: warning: Function parameter or member 'wakeup2_data' not described in 'palmas_gpadc'
drivers/iio/adc/palmas_gpadc.c:114: warning: Function parameter or member 'wakeup1_enable' not described in 'palmas_gpadc'
drivers/iio/adc/palmas_gpadc.c:114: warning: Function parameter or member 'wakeup2_enable' not described in 'palmas_gpadc'
Cc: Pradeep Goudagunta <pgoudagunta@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
No attempt has been made to document any of the demoted structs here.
Fixes the following W=1 kernel build warning(s):
drivers/iio/adc/max9611.c:117: warning: cannot understand function prototype: 'const unsigned int max9611_mux_conf[][2] = '
drivers/iio/adc/max9611.c:145: warning: cannot understand function prototype: 'const unsigned int max9611_gain_conf[][2] = '
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Kerneldoc expects attributes/parameters to be in '@*.: ' format.
Fixes the following W=1 kernel build warning(s):
drivers/iio/adc/max1363.c:190: warning: Function parameter or member 'lock' not described in 'max1363_state'
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Rohit Sarkar <rohitsarkar5398@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes the following W=1 kernel build warning(s):
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h:487:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h:497:44: warning: ‘st_lsm6dsx_accel_ext_info’ defined but not used [-Wunused-const-variable=]
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
'fxas21002c_reg_fields' is only used in '*core*', meaning that '*i2c*'
and '*spi*' complain of a defined but not used const variable. Let's
move it into the source file.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/iio/gyro/fxas21002c_i2c.c:14:
drivers/iio/gyro/fxas21002c.h:79:31: warning: ‘fxas21002c_reg_fields’ defined but not used [-Wunused-const-variable=]
79 | static const struct reg_field fxas21002c_reg_fields[] = {
| ^~~~~~~~~~~~~~~~~~~~~
In file included from drivers/iio/gyro/fxas21002c_spi.c:14:
drivers/iio/gyro/fxas21002c.h:79:31: warning: ‘fxas21002c_reg_fields’ defined but not used [-Wunused-const-variable=]
79 | static const struct reg_field fxas21002c_reg_fields[] = {
| ^~~~~~~~~~~~~~~~~~~~~
Cc: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes the following W=1 kernel build warning(s):
drivers/iio/accel/sca3000.c:210: warning: Function parameter or member 'mot_det_mult_xz' not described in 'sca3000_chip_info'
drivers/iio/accel/sca3000.c:210: warning: Function parameter or member 'mot_det_mult_y' not described in 'sca3000_chip_info'
drivers/iio/accel/sca3000.c:871: warning: Function parameter or member 'indio_dev' not described in 'sca3000_read_event_value'
drivers/iio/accel/sca3000.c:871: warning: Function parameter or member 'chan' not described in 'sca3000_read_event_value'
drivers/iio/accel/sca3000.c:871: warning: Function parameter or member 'type' not described in 'sca3000_read_event_value'
drivers/iio/accel/sca3000.c:871: warning: Function parameter or member 'dir' not described in 'sca3000_read_event_value'
drivers/iio/accel/sca3000.c:871: warning: Function parameter or member 'info' not described in 'sca3000_read_event_value'
drivers/iio/accel/sca3000.c:871: warning: Function parameter or member 'val' not described in 'sca3000_read_event_value'
drivers/iio/accel/sca3000.c:871: warning: Function parameter or member 'val2' not described in 'sca3000_read_event_value'
drivers/iio/accel/sca3000.c:1110: warning: Function parameter or member 'indio_dev' not described in 'sca3000_read_event_config'
drivers/iio/accel/sca3000.c:1110: warning: Function parameter or member 'chan' not described in 'sca3000_read_event_config'
drivers/iio/accel/sca3000.c:1110: warning: Function parameter or member 'type' not described in 'sca3000_read_event_config'
drivers/iio/accel/sca3000.c:1110: warning: Function parameter or member 'dir' not described in 'sca3000_read_event_config'
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
