The last real user nSIM_700 of the "snps,arc-emac" compatible string in
a driver was removed in 2019. The use of this string in the combined DT of
rk3066a/rk3188 as place holder has also been replaced, so
remove emac_arc.c to clean up some code.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the combined DT of rk3066a/rk3188 the emac node uses as place holder
the compatible string "snps,arc-emac". The last real user nSIM_700
of the "snps,arc-emac" compatible string in a driver was removed in 2019.
Rockchip emac nodes don't make use of this common fall back string.
In order to removed unused driver code replace this string with
"rockchip,rk3066-emac".
As we are there remove the blank lines and sort.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert fsl-fman from txt to yaml format and split it fsl,fman.yam,
fsl,fman-port.yaml, fsl-muram.yaml, fsl-mdio.yaml.
Addition changes:
fsl,fman.yaml:
- Fixed interrupts in example.
- Fixed ethernet@e8000 miss } in example.
- ptp-timer add label in example.
- Ref to new fsl,fman*.yaml.
- Reorder property in example.
- Keep only one example.
- Add const for #address-cells and #size-cells.
- Use defined interrupt type.
- ptp example use node name phc.
fsl,fman-port:
- Keep only one example.
fsl,fman-mdio:
- Add little-endian property.
- Add ref to mdio.yaml.
- Remove suppress-preamble.
- Add #address-cells and #size-cells in example.
- Remove clock-frequency, which already describe in mmio.yaml.
fsl,muram.yaml:
- Add reg property.
- Remove range property.
- Use reg instead of range in example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240618-ls_fman-v2-2-f00a82623d8e@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert ptp-qoirq from txt to yaml format.
Additional change:
- Fixed example interrupts proptery. Need only 1 irq by check MPC8313 spec.
- Move Reference clock context under clk,sel.
- Interrupts is not required property.
- Use low case for hex value.
- Check reference manual of MPC8313, p1010 and so on, which dts use more
than 1 irqs. Only 1 irq for each ptp device. Check driver code
(drivers/ptp/ptp_qoriq.c) and only 1 irq used. So original description is
wrong.
- Remove comments for compatible string.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240618-ls_fman-v2-1-f00a82623d8e@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bpf and netfilter.
Happy summer solstice! The line count is a bit inflated by a selftest
and update to a driver's FW interface header, in reality this is
slightly below average for us. We are expecting one driver fix from
Intel, but there are no big known issues.
Current release - regressions:
- ipv6: bring NLM_DONE out to a separate recv() again
Current release - new code bugs:
- wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API
Previous releases - regressions:
- wifi: mac80211: fix monitor channel setting with chanctx emulation
(probably most awaited of the fixes in this PR, tracked by Thorsten)
- usb: ax88179_178a: bring back reset on init, if PHY is disconnected
- bpf: fix UML x86_64 compile failure with BPF
- bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit
with malicious BPF
- eth: mvpp2: use slab_build_skb() for packets in slab, driver was
missed during API refactoring
- wifi: iwlwifi: add missing unlock of mvm mutex
Previous releases - always broken:
- ipv6: add a number of missing null-checks for in6_dev_get(), in case
IPv6 disabling races with the datapath
- bpf: fix reg_set_min_max corruption of fake_reg
- sched: act_ct: add netns as part of the key of tcf_ct_flow_table"
* tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings
selftests: virtio_net: add forgotten config options
bnxt_en: Restore PTP tx_avail count in case of skb_pad() error
bnxt_en: Set TSO max segs on devices with limits
bnxt_en: Update firmware interface to 1.10.3.44
net: stmmac: Assign configured channel value to EXTTS event
net: do not leave a dangling sk pointer, when socket creation fails
net/tcp_ao: Don't leak ao_info on error-path
ice: Fix VSI list rule with ICE_SW_LKUP_LAST type
ipv6: bring NLM_DONE out to a separate recv() again
selftests: add selftest for the SRv6 End.DX6 behavior with netfilter
selftests: add selftest for the SRv6 End.DX4 behavior with netfilter
netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core
seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
netfilter: ipset: Fix suspicious rcu_dereference_protected()
selftests: openvswitch: Set value to nla flags.
octeontx2-pf: Fix linking objects into multiple modules
octeontx2-pf: Add error handling to VLAN unoffload handling
virtio_net: fixing XDP for fully checksummed packets handling
virtio_net: checksum offloading handling fix
...
Pull sound fixes from Takashi Iwai:
"Lots of small HD-audio quirks and fixes (mostly Realtek codec and
Cirrus stuff).
Also a small MIDI 2.0 fix and a fix for missing module description
are included"
* tag 'sound-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: cs35l56: Select SERIAL_MULTI_INSTANTIATE
ALSA: hda/realtek: Add more codec ID to no shutup pins list
sound/oss/dmasound: add missing MODULE_DESCRIPTION() macro
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14ARP8
ALSA: hda/realtek: Enable headset mic on IdeaPad 330-17IKB 81DM
ALSA: hda: tas2781: Component should be unbound before deconstruction
ALSA: hda: cs35l41: Component should be unbound before deconstruction
ALSA: hda: cs35l56: Component should be unbound before deconstruction
ALSA/hda: intel-dsp-config: Document AVS as dsp_driver option
ALSA: hda/realtek: Support Lenovo Thinkbook 13x Gen 4
ALSA: hda/realtek: Support Lenovo Thinkbook 16P Gen 5
ALSA: hda: cs35l41: Support Lenovo Thinkbook 13x Gen 4
ALSA: hda: cs35l41: Support Lenovo Thinkbook 16P Gen 5
ALSA: hda/realtek: Remove Framework Laptop 16 from quirks
ALSA: hda/realtek: Limit mic boost on N14AP7
ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 445/465 G11.
ALSA: seq: ump: Fix missing System Reset message handling
ALSA: hda: cs35l41: Possible null pointer dereference in cs35l41_hda_unbind()
ALSA: hda: cs35l56: Fix lifecycle of codec pointer
Pull mfd fix from Lee Jones:
- Fix AXP717 PMIC probe and by extension its consumers
* tag 'mfd-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: axp20x: AXP717: Fix missing IRQ status registers range
Michael Chan says:
====================
bnxt_en: Bug fixes for net
The first firmware interface update is needed by the second patch to
limit the number of TSO segments on the 5760X chips. The third patch
fixes the TX error path for PTP packets.
====================
Link: https://lore.kernel.org/r/20240618215313.29631-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add flow director filter match and miss statistics to ethtool -S.
And change the number of queues when using flow director for ehtool -l.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Support the addition and deletion of Flow Director filters.
Supported fields: src-ip, dst-ip, src-port, dst-port
Supported flow-types: tcp4, udp4, sctp4, ipv4
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add flow director ATR filter. ATR mode is enabled by default to filter
TCP packets.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Assign the configured channel value to the EXTTS event in the timestamp
interrupt handler. Without assigning the correct channel, applications
like ts2phc will refuse to accept the event, resulting in errors such
as:
...
ts2phc[656.834]: config item end1.ts2phc.pin_index is 0
ts2phc[656.834]: config item end1.ts2phc.channel is 3
ts2phc[656.834]: config item end1.ts2phc.extts_polarity is 2
ts2phc[656.834]: config item end1.ts2phc.extts_correction is 0
...
ts2phc[656.862]: extts on unexpected channel
ts2phc[658.141]: extts on unexpected channel
ts2phc[659.140]: extts on unexpected channel
Fixes: f4da56529d ("net: stmmac: Add support for external trigger timestamping")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20240618073821.619751-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 fixes the suspicious RCU usage warning that resulted from the
recent fix for the race between namespace cleanup and gc in
ipset left out checking the pernet exit phase when calling
rcu_dereference_protected(), from Jozsef Kadlecsik.
Patch #2 fixes incorrect input and output netdevice in SRv6 prerouting
hooks, from Jianguo Wu.
Patch #3 moves nf_hooks_lwtunnel sysctl toggle to the netfilter core.
The connection tracking system is loaded on-demand, this
ensures availability of this knob regardless.
Patch #4-#5 adds selftests for SRv6 netfilter hooks also from Jianguo Wu.
netfilter pull request 24-06-19
* tag 'nf-24-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: add selftest for the SRv6 End.DX6 behavior with netfilter
selftests: add selftest for the SRv6 End.DX4 behavior with netfilter
netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core
seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
netfilter: ipset: Fix suspicious rcu_dereference_protected()
====================
Link: https://lore.kernel.org/r/20240619170537.2846-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ACPI IDs used in the CS35L56 HDA drivers are all handled by the
serial multi-instantiate driver which starts multiple Linux device
instances from a single ACPI Device() node.
As serial multi-instantiate is not an optional part of the system add it
as a dependency in Kconfig so that it is not overlooked.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/20240619161602.117452-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Shannon Nelson says:
====================
ionic: rework fix for doorbell miss
A latency test in a scaled out setting (many VMs with many queues)
has uncovered an issue with our missed doorbell fix from
commit b69585bfce ("ionic: missed doorbell workaround")
As a refresher, the Elba ASIC has an issue where once in a blue
moon it might miss/drop a queue doorbell notification from
the driver. This can result in Tx timeouts and potential Rx
buffer misses.
The basic problem with the original solution is that
we're delaying things with a timer for every single queue,
periodically using mod_timer() to reset to reset the alarm, and
mod_timer() becomes a more and more expensive thing as there
are more and more VFs and queues each with their own timer.
A ping-pong latency test tends to exacerbate the effect such
that every napi is doing a mod_timer() in every cycle.
An alternative has been worked out to replace this using
periodic workqueue items outside the napi cycle to request a
napi_schedule driven by a single delayed-workqueue per device
rather than a timer for every queue. Also, now that newer
firmware is actually reporting its ASIC type, we can restrict
this to the appropriate chip.
The testing scenario used 128 VFs in UP state, 16 queues per
VF, and latency tests were done using TCP_RR with adaptive
interrupt coalescing enabled, running on 1 VF. We would see
99th percentile latencies of up to 900us range, with some max
fliers as much as 4ms.
With these fixes the 99th percentile latencies are typically well
under 50us with the occasional max under 500us.
v1:
https://lore.kernel.org/netdev/20240610230706.34883-1-shannon.nelson@amd.com/
====================
Link: https://lore.kernel.org/r/20240619003257.6138-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We only support (u16)-1 size for rx_copybreak, so we can reduce the
field size and move a couple other fields around to save a little
space in the ionic_lif struct.
Before:
/* size: 17440, cachelines: 273, members: 56 */
/* sum members: 17403, holes: 9, sum holes: 37 */
/* last cacheline: 32 bytes */
After:
/* size: 17424, cachelines: 273, members: 56 */
/* sum members: 17401, holes: 7, sum holes: 23 */
/* last cacheline: 16 bytes */
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240619003257.6138-8-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a work item for each queue that will be run on the queue's
preferred cpu and will schedule another napi. This napi is
run in case the device missed a doorbell and didn't process
a packet. This is a problem for the Elba asic that happens
very rarely.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240619003257.6138-6-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of using the system's default workqueue, add a private
workqueue for the device to use for its little jobs. This is
to better support the new work items we will be adding in the
next patches for PF and VF specific jobs, without inundating
the system workqueue in a couple of customer cases where our
devices get scaled out to 100-200 VFs.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240619003257.6138-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the driver either sets the initial interrupt affinity for its
adminq and tx/rx queues on probe or resets it on various
down/up/reconfigure flows. If any user and/or user process
(i.e. irqbalance) changes IRQ affinity for any of the driver's interrupts
that will be reset to driver defaults whenever any down/up/reconfigure
operation happens. This is incorrect and is fixed by making 2 changes:
1. Allocate an array of cpumasks that's only allocated on probe and
destroyed on remove.
2. Update the cpumask(s) for interrupts that are in use by registering
for affinity notifiers.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240619003257.6138-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata says:
====================
mlxsw: Use page pool for Rx buffers allocation
Amit Cohen writes:
After using NAPI to process events from hardware, the next step is to
use page pool for Rx buffers allocation, which is also enhances
performance.
To simplify this change, first use page pool to allocate one continuous
buffer for each packet, later memory consumption can be improved by using
fragmented buffers.
This set significantly enhances mlxsw driver performance, CPU can handle
about 370% of the packets per second it previously handled.
The next planned improvement is using XDP to optimize telemetry.
Patch set overview:
Patches #1-#2 are small preparations for page pool usage
Patch #3 initializes page pool, but do not use it
Patch #4 converts the driver to use page pool for buffers allocations
Patch #5 is an optimization for buffer access
Patch #6 cleans up an unused structure
Patch #7 uses napi_consume_skb() as part of Tx completion
====================
Link: https://lore.kernel.org/r/cover.1718709196.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As part of driver init, all Rx queues are filled with buffers for
hardware usage. Later, when a packet is received, a new buffer should be
allocated to be used by hardware instead of the received buffer.
Packet's processing time includes allocation time, which can be improved
using page pool.
Using page pool, DMA mapping is done only for first allocation of buffers.
As subsequent buffers allocation avoid DMA mapping, it results in
performance improvement. The purpose of page pool is to allocate pages fast
from cache without locking. This lockless guarantee naturally comes from
running under a NAPI.
Use page pool to allocate the data buffer only, so hardware will use it to
fill the packet. At completion time, attach the data buffer (now filled
with packet payload) to new SKB which is allocated around the received
buffer. SKB building at completion time prevents cache miss for each
packet, as now the SKB is allocated right before packets will be handled by
networking stack.
Page pool for each Rx queue enhances Rx side performance by reclaiming
buffers back to each queue specific pool. This change significantly
improves driver performance, CPU can handle about 345% of the packets per
second it previously handled.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/1cf788a8f43c70aae6d526018ef77becb27ad6d3.1718709196.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Next patch will use page pool to allocate buffers for RDQ. Initialize
page pool for each CQ, which is mapped 1:1 to RDQ. Page pool for each Rx
queue enhances Rx side performance by reclaiming buffers back to each queue
specific pool.
When only one NAPI instance is the consumer of pages from page pool, it is
recommended to pass it as part of 'page_pool_params', then page pool APIs
will be done without special locks. mlxsw driver holds NAPI instance per
CQ, so add page pool per CQ and use the existing NAPI instance.
For now, pages are not allocated from the pool, next patch will use it.
Some notes regarding 'page_pool_params':
* Use PP_FLAG_DMA_MAP to allow page pool handles DMA mapping, for now
do not use sync flag, as only the device writes to this memory and we
read it only when it finishes writing there. This will probably be
changed when we will support XDP.
* Define 'order' according to maximum MTU and take into account software
overhead. Some round up are done, which means that we allocate more pages
than we really need. This can be improved later by using fragmented
buffers.
* Use pool_size = MLXSW_PCI_WQE_COUNT. This will be the size of 'ptr_ring',
and should be the maximum amount of packets that page pool will allocate
memory for. In our case, this is the queue size, defined as
MLXSW_PCI_WQE_COUNT.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/02e5856ae7c572d4293ce6bb92c286ee6cfec800.1718709196.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Next patches will add support for page pool in mlxsw driver. Page pool will
be used to allocate buffers for RDQ and will use NAPI instance of the
appropriate CQ (RDQ is mapped 1:1 to CQ).
To allow pool initialization as part of CQ init, when NAPI is initialized,
page_pool structure will be as part of CQ structure. Later, the allocations
for RDQ will be done from the pool in the appropriate CQ. To allow access
to the appropriate pool, set CQ pointer as part of RDQ initialization.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/d60918ca1e142a554af1df9c1152cdac83854a3b.1718709196.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlxsw_pci_cq_napi_setup() includes both NAPI initialization and
enablement, similar to teardown function. Next patches will add support
for page pool in mlxsw driver, then we use NAPI instance for page pool.
Page pool initialization should be done before NAPI enablement, same for
page pool destruction which should be done after NAPI disablement.
As preparation, split NAPI setup/teardown into two steps, then page pool
setup will be done between the phases.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/8dbf37e859f07247498fca17109b8858ff2b0498.1718709196.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/amd/a2065.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/amd/ariadne.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/amd/atarilance.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/amd/hplance.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/amd/7990.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/amd/mvme147.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/amd/sun3lance.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().
This includes drivers/net/ethernet/amd/lance.c which, although it did
not produce a warning with the m68k allmodconfig configuration, may
cause this warning with other configurations.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240618-md-m68k-drivers-net-ethernet-amd-v1-1-50ee7a9ad50e@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
