In contrast to legacy mode, the DMA translation table is configured in
the PASID table entry instead of the context entry for scalable mode.
For this reason, it is more appropriate to set up the scalable mode
context entry in the device_probe callback and direct it to the
appropriate PASID table.
The iommu domain attach/detach operations only affect the PASID table
entry. Therefore, there is no need to modify the context entry when
configuring the translation type and page table.
The only exception is the kdump case, where context entry setup is
postponed until the device driver invokes the first DMA interface.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240305013305.204605-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In the kdump kernel, the IOMMU operates in deferred_attach mode. In this
mode, info->domain may not yet be assigned by the time the release_device
function is called. It leads to the following crash in the crash kernel:
BUG: kernel NULL pointer dereference, address: 000000000000003c
...
RIP: 0010:do_raw_spin_lock+0xa/0xa0
...
_raw_spin_lock_irqsave+0x1b/0x30
intel_iommu_release_device+0x96/0x170
iommu_deinit_device+0x39/0xf0
__iommu_group_remove_device+0xa0/0xd0
iommu_bus_notifier+0x55/0xb0
notifier_call_chain+0x5a/0xd0
blocking_notifier_call_chain+0x41/0x60
bus_notify+0x34/0x50
device_del+0x269/0x3d0
pci_remove_bus_device+0x77/0x100
p2sb_bar+0xae/0x1d0
...
i801_probe+0x423/0x740
Use the release_domain mechanism to fix it. The scalable mode context
entry which is not part of release domain should be cleared in
release_device().
Fixes: 586081d3f6 ("iommu/vt-d: Remove DEFER_DEVICE_DOMAIN_INFO")
Reported-by: Eric Badger <ebadger@purestorage.com>
Closes: https://lore.kernel.org/r/20240113181713.1817855-1-ebadger@purestorage.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240305013305.204605-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The current device_release callback for individual iommu drivers does the
following:
1) Silent IOMMU DMA translation: It detaches any existing domain from the
device and puts it into a blocking state (some drivers might use the
identity state).
2) Resource release: It releases resources allocated during the
device_probe callback and restores the device to its pre-probe state.
Step 1 is challenging for individual iommu drivers because each must check
if a domain is already attached to the device. Additionally, if a deferred
attach never occurred, the device_release should avoid modifying hardware
configuration regardless of the reason for its call.
To simplify this process, introduce a static release_domain within the
iommu_ops structure. It can be either a blocking or identity domain
depending on the iommu hardware. The iommu core will decide whether to
attach this domain before the device_release callback, eliminating the
need for repetitive code in various drivers.
Consequently, the device_release callback can focus solely on the opposite
operations of device_probe, including releasing all resources allocated
during that callback.
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240305013305.204605-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Because surprise removal could happen anytime, e.g. user could request safe
removal to EP(endpoint device) via sysfs and brings its link down to do
surprise removal cocurrently. such aggressive cases would cause ATS
invalidation request issued to non-existence target device, then deadly
loop to retry that request after ITE fault triggered in interrupt context.
this patch aims to optimize the ITE handling by checking the target device
presence state to avoid retrying the timeout request blindly, thus avoid
hard lockup or system hang.
Devices TLB should only be invalidated when devices are in the
iommu->device_rbtree (probed, not released) and present.
Fixes: 6ba6c3a4ca ("VT-d: add device IOTLB invalidation support")
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Link: https://lore.kernel.org/r/20240301080727.3529832-4-haifeng.zhao@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The existing I/O page fault handler currently locates the PCI device by
calling pci_get_domain_bus_and_slot(). This function searches the list
of all PCI devices until the desired device is found. To improve lookup
efficiency, replace it with device_rbtree_find() to search the device
within the probed device rbtree.
The I/O page fault is initiated by the device, which does not have any
synchronization mechanism with the software to ensure that the device
stays in the probed device tree. Theoretically, a device could be released
by the IOMMU subsystem after device_rbtree_find() and before
iopf_get_dev_fault_param(), which would cause a use-after-free problem.
Add a mutex to synchronize the I/O page fault reporting path and the IOMMU
release device path. This lock doesn't introduce any performance overhead,
as the conflict between I/O page fault reporting and device releasing is
very rare.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240220065939.121116-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use a red-black tree(rbtree) to track devices probed by the driver's
probe_device callback. These devices need to be looked up quickly by
a source ID when the hardware reports a fault, either recoverable or
unrecoverable.
Fault reporting paths are critical. Searching a list in this scenario
is inefficient, with an algorithm complexity of O(n). An rbtree is a
self-balancing binary search tree, offering an average search time
complexity of O(log(n)). This significant performance improvement
makes rbtrees a better choice.
Furthermore, rbtrees are implemented on a per-iommu basis, eliminating
the need for global searches and further enhancing efficiency in
critical fault paths. The rbtree is protected by a spin lock with
interrupts disabled to ensure thread-safe access even within interrupt
contexts.
Co-developed-by: Huang Jiaqing <jiaqing.huang@intel.com>
Signed-off-by: Huang Jiaqing <jiaqing.huang@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240220065939.121116-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 2f26e0a9c9 ("iommu/vt-d: Add basic SVM PASID support") added a
special treatment to mandate that no page faults may be outstanding for
the PASID after intel_svm_unbind_mm() is called, as the PASID will be
released and reused after unbind.
This is unnecessary anymore as no outstanding page faults have been
ensured in the driver's remove_dev_pasid path:
- Tear down the pasid entry, which guarantees that new page faults for
the PASID will be rejected by the iommu hardware.
- All outstanding page faults have been responded to.
- All hardware pending faults are drained in intel_drain_pasid_prq().
Remove this unnecessary code.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20240219125723.1645703-2-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 62edf5dc4a ("intel-iommu: Restore DMAR_BROKEN_GFX_WA option for
broken graphics drivers") was introduced 24 years ago as a temporary
workaround for graphics drivers that used physical addresses for DMA and
avoided DMA APIs. This workaround was disabled by default.
As 24 years have passed, it is expected that graphics driver developers
have migrated their drivers to use kernel DMA APIs. Therefore, this
workaround is no longer required and could been removed.
The Intel iommu driver also provides a "igfx_off" option to turn off
the DMA translation for the graphic dedicated IOMMU. Hence, there is
really no good reason to keep this config option.
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240130060823.57990-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous bug fixes and cleanups in ext4's multi-block allocator
and extent handling code"
* tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type
ext4: make ext4_map_blocks() distinguish delalloc only extent
ext4: add a hole extent entry in cache after punch
ext4: correct the hole length returned by ext4_map_blocks()
ext4: convert to exclusive lock while inserting delalloc extents
ext4: refactor ext4_da_map_blocks()
ext4: remove 'needed' in trace_ext4_discard_preallocations
ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations
ext4: remove unused return value of ext4_mb_release_group_pa
ext4: remove unused return value of ext4_mb_release_inode_pa
ext4: remove unused return value of ext4_mb_release
ext4: remove unused ext4_allocation_context::ac_groups_considered
ext4: remove unneeded return value of ext4_mb_release_context
ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*()
ext4: remove unused return value of __mb_check_buddy
ext4: mark the group block bitmap as corrupted before reporting an error
ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks()
...
Pull smb client fixes from Steve French:
"Five smb3 client fixes, mostly multichannel related:
- four multichannel fixes including fix for channel allocation when
multiple inactive channels, fix for unneeded race in channel
deallocation, correct redundant channel scaling, and redundant
multichannel disabling scenarios
- add warning if max compound requests reached"
* tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: increase number of PDUs allowed in a compound request
cifs: failure to add channel on iface should bump up weight
cifs: do not search for channel if server is terminating
cifs: avoid redundant calls to disable multichannel
cifs: make sure that channel scaling is done only once
Pull xfs fixes from Chandan Babu:
- Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format
attribute fork
- Remove conditional compilation of realtime geometry validator
functions to prevent confusing error messages from being printed on
the console during the mount operation
* tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove conditional building of rt geometry validator functions
xfs: reset XFS_ATTR_INCOMPLETE filter on node removal
Pull char/misc driver fixes from Greg KH:
"Here are three tiny driver fixes for 6.8-rc3. They include:
- Android binder long-term bug with epoll finally being fixed
- fastrpc driver shutdown bugfix
- open-dice lockdep fix
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: signal epoll threads of self-work
misc: open-dice: Fix spurious lockdep warning
misc: fastrpc: Mark all sessions as invalid in cb_remove
Pull tty and serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.8-rc3 that
resolve a number of reported issues. Included in here are:
- rs485 flag definition fix that affected the user/kernel abi in -rc1
- max310x driver fixes
- 8250_pci1xxxx driver off-by-one fix
- uart_tiocmget locking race fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: max310x: prevent infinite while() loop in port startup
serial: max310x: fail probe if clock crystal is unstable
serial: max310x: improve crystal stable clock detection
serial: max310x: set default value when reading clock ready bit
serial: core: Fix atomicity violation in uart_tiocmget
serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data()
tty: serial: Fix bit order in RS485 flag definitions
Pull USB driver fixes from Greg KH:
"Here are a bunch of small USB driver fixes for 6.8-rc3. Included in
here are:
- new usb-serial driver ids
- new dwc3 driver id added
- typec driver change revert
- ncm gadget driver endian bugfix
- xhci bugfixes for a number of reported issues
- usb hub bugfix for alternate settings
- ulpi driver debugfs memory leak fix
- chipidea driver bugfix
- usb gadget driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
USB: serial: option: add Fibocom FM101-GL variant
USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
USB: serial: cp210x: add ID for IMST iM871A-USB
usb: typec: tcpm: fix the PD disabled case
usb: ucsi_acpi: Quirk to ack a connector change ack cmd
usb: ucsi_acpi: Fix command completion handling
usb: ucsi: Add missing ppm_lock
usb: ulpi: Fix debugfs directory leak
Revert "usb: typec: tcpm: fix cc role at port reset"
usb: gadget: pch_udc: fix an Excess kernel-doc warning
usb: f_mass_storage: forbid async queue when shutdown happen
USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT
usb: chipidea: core: handle power lost in workqueue
usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend
usb: dwc3: pci: add support for the Intel Arrow Lake-H
usb: core: Prevent null pointer dereference in update_port_device_state
xhci: handle isoc Babble and Buffer Overrun events properly
xhci: process isoc TD properly when there was a transaction error mid TD.
xhci: fix off by one check when adding a secondary interrupter.
xhci: fix possible null pointer dereference at secondary interrupter removal
...
Pull i2c fixlet from Wolfram Sang:
"MAINTAINERS update to point people to the new tree for i2c host driver
changes"
* tag 'i2c-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Update i2c host drivers repository
Pull dmaengine fixes from Vinod Koul:
"Core:
- fix return value of is_slave_direction() for D2D dma
Driver fixes for:
- Documentaion fixes to resolve warnings for at_hdmac driver
- bunch of fsl driver fixes for memory leaks, and useless kfree
- TI edma and k3 fixes for packet error and null pointer checks"
* tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: at_hdmac: add missing kernel-doc style description
dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
dmaengine: fsl-qdma: Remove a useless devm_kfree()
dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA
dmaengine: ti: k3-udma: Report short packet errors
dmaengine: ti: edma: Add some null pointer checks to the edma_probe
dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
dmaengine: at_hdmac: fix some kernel-doc warnings
Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Vendor events:
- Intel Alderlake/Sapphire Rapids metric fixes, the CPU type
("cpu_atom", "cpu_core") needs to be used as a prefix to be
considered on a metric formula, detected via one of the 'perf test'
entries.
'perf test' fixes:
- Fix the creation of event selector lists on 'perf test' entries, by
initializing the sample ID flag, which is done by 'perf record', so
this fix affects only the tests, the common case isn't affected
- Make 'perf list' respect debug settings (-v) to fix its 'perf test'
entry
- Fix 'perf script' test when python support isn't enabled
- Special case 'perf script' tests on s390, where only DWARF call
graphs are supported and only on software events
- Make 'perf daemon' signal test less racy
Compiler warnings/errors:
- Remove needless malloc(0) call in 'perf top' that triggers
-Walloc-size
- Fix calloc() argument order to address error introduced in gcc-14
Build:
- Make minimal shellcheck version to v0.6.0, avoiding the build to
fail with older versions
Sync kernel header copies:
- stat.h to pick STATX_MNT_ID_UNIQUE
- msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING
- drm.h to pick DRM_IOCTL_MODE_CLOSEFB
- unistd.h to pick {list,stat}mount,
lsm_{[gs]et_self_attr,list_modules} syscall numbers
- x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes
- x86's mem{cpy,set}_64.S used in 'perf bench'
- Also, without tooling effects: asm-generic/unaligned.h, mount.h,
fcntl.h, kvm headers"
* tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits)
perf tools headers: update the asm-generic/unaligned.h copy with the kernel sources
tools include UAPI: Sync linux/mount.h copy with the kernel sources
perf evlist: Fix evlist__new_default() for > 1 core PMU
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers x86 cpufeatures: Sync with the kernel sources to pick TDX, Zen, APIC MSR fence changes
tools headers UAPI: Sync unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers
perf vendor events intel: Alderlake/sapphirerapids metric fixes
tools headers UAPI: Sync kvm headers with the kernel sources
perf tools: Fix calloc() arguments to address error introduced in gcc-14
perf top: Remove needless malloc(0) call that triggers -Walloc-size
perf build: Make minimal shellcheck version to v0.6.0
tools headers UAPI: Update tools's copy of drm.h headers to pick DRM_IOCTL_MODE_CLOSEFB
perf test shell daemon: Make signal test less racy
perf test shell script: Fix test for python being disabled
perf test: Workaround debug output in list test
perf list: Add output file option
perf list: Switch error message to pr_err() to respect debug settings (-v)
perf test: Fix 'perf script' tests on s390
tools headers UAPI: Sync linux/fcntl.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING
...
Pull tracing and eventfs fixes from Steven Rostedt:
- Fix the return code for ring_buffer_poll_wait()
It was returing a -EINVAL instead of EPOLLERR.
- Zero out the tracefs_inode so that all fields are initialized.
The ti->private could have had stale data, but instead of just
initializing it to NULL, clear out the entire structure when it is
allocated.
- Fix a crash in timerlat
The hrtimer was initialized at read and not open, but is canceled at
close. If the file was opened and never read the close will pass a
NULL pointer to hrtime_cancel().
- Rewrite of eventfs.
Linus wrote a patch series to remove the dentry references in the
eventfs_inode and to use ref counting and more of proper VFS
interfaces to make it work.
- Add warning to put_ei() if ei is not set to free. That means
something is about to free it when it shouldn't.
- Restructure the eventfs_inode to make it more compact, and remove the
unused llist field.
- Remove the fsnotify*() funtions for when the inodes were being
created in the lookup code. It doesn't make sense to notify about
creation just because something is being looked up.
- The inode hard link count was not accurate.
It was being updated when a file was looked up. The inodes of
directories were updating their parent inode hard link count every
time the inode was created. That means if memory reclaim cleaned a
stale directory inode and the inode was lookup up again, it would
increment the parent inode again as well. Al Viro said to just have
all eventfs directories have a hard link count of 1. That tells user
space not to trust it.
* tag 'trace-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Keep all directory links at 1
eventfs: Remove fsnotify*() functions from lookup()
eventfs: Restructure eventfs_inode structure to be more condensed
eventfs: Warn if an eventfs_inode is freed without is_freed being set
tracing/timerlat: Move hrtimer_init to timerlat_fd open()
eventfs: Get rid of dentry pointers without refcounts
eventfs: Clean up dentry ops and add revalidate function
eventfs: Remove unused d_parent pointer field
tracefs: dentry lookup crapectomy
tracefs: Avoid using the ei->dentry pointer unnecessarily
eventfs: Initialize the tracefs inode properly
tracefs: Zero out the tracefs_inode when allocating it
ring-buffer: Clean ring_buffer_poll_wait() error return
Pull gfs2 revert from Andreas Gruenbacher:
"It turns out that the commit to use GL_NOBLOCK flag for non-blocking
lookups has several issues, and not all of them have a simple fix"
* tag 'gfs2-v6.8-rc2-revert' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
Revert "gfs2: Use GL_NOBLOCK flag for non-blocking lookups"
Pull pci fixes from Bjorn Helgaas:
- Fix a potential deadlock that was reintroduced by an ASPM revert
merged for v6.8 (Johan Hovold)
- Add Manivannan Sadhasivam as PCI Endpoint maintainer (Lorenzo
Pieralisi)
* tag 'pci-v6.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Manivannan Sadhasivam as PCI Endpoint maintainer
PCI/ASPM: Fix deadlock when enabling ASPM
Pul drm fixes from Dave Airlie:
"Regular weekly fixes, mostly amdgpu and xe. One nouveau fix is a
better fix for the deadlock and also helps with a sync race we were
seeing.
dma-buf:
- heaps CMA page accounting fix
virtio-gpu:
- fix segment size
xe:
- A crash fix
- A fix for an assert due to missing mem_acces ref
- Only allow a single user-fence per exec / bind.
- Some sparse warning fixes
- Two fixes for compilation failures on various odd combinations of
gcc / arch pointed out on LKML.
- Fix a fragile partial allocation pointed out on LKML.
- A sysfs ABI documentation warning fix
amdgpu:
- Fix reboot issue seen on some 7000 series dGPUs
- Fix client init order for KFD
- Misc display fixes
- USB-C fix
- DCN 3.5 fixes
- Fix issues with GPU scheduler and GPU reset
- GPU firmware loading fix
- Misc fixes
- GC 11.5 fix
- VCN 4.0.5 fix
- IH overflow fix
amdkfd:
- SVM fixes
- Trap handler fix
- Fix device permission lookup
- Properly reserve BO before validating it
nouveau:
- fence/irq lock deadlock fix (second attempt)
- gsp command size fix
* tag 'drm-fixes-2024-02-03' of git://anongit.freedesktop.org/drm/drm: (35 commits)
nouveau: offload fence uevents work to workqueue
nouveau/gsp: use correct size for registry rpc.
drm/amdgpu/pm: Use inline function for IP version check
drm/hwmon: Fix abi doc warnings
drm/xe: Make all GuC ABI shift values unsigned
drm/xe/vm: Subclass userptr vmas
drm/xe: Use LRC prefix rather than CTX prefix in lrc desc defines
drm/xe: Don't use __user error pointers
drm/xe: Annotate mcr_[un]lock()
drm/xe: Only allow 1 ufence per exec / bind IOCTL
drm/xe: Grab mem_access when disabling C6 on skip_guc_pc platforms
drm/xe: Fix crash in trace_dma_fence_init()
drm/amdgpu: Reset IH OVERFLOW_CLEAR bit
drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend
drm/amdgpu: drm/amdgpu: remove golden setting for gfx 11.5.0
drm/amdkfd: reserve the BO before validating it
drm/amdgpu: Fix missing error code in 'gmc_v6/7/8/9_0_hw_init()'
drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'
drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()'
drm/amd: Don't init MEC2 firmware when it fails to load
...
Pull input fixes from Dmitry Torokhov:
- a fix for the fix to deal with newer laptops which get confused by
the "GET ID" command when probing for PS/2 keyboards
- a couple of tweaks to i8042 to handle Clevo NS70PU and Lifebook U728
laptops
- a change to bcm5974 to validate that the device has appropriate
endpoints
- an addition of new product ID to xpad driver to recognize Lenovo
Legion Go controllers
- a quirk to Goodix controller to deal with extra GPIO described in
ACPI tables on some devices.
* tag 'input-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table
Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU
Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID
Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID
Input: bcm5974 - check endpoint type before starting traffic
Input: xpad - add Lenovo Legion Go controllers
Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0
Pull sound fixes from Takashi Iwai:
"A collection of fixes, mostly device-specific ones:
- Minor PCM core fix for name strings
- ASoC Qualcomm fixes, including DAI support extensions
- ASoC AMD platform updates
- ASoC Allwinner platform updates
- Various ASoC codec fixes for WSA, WCD, ES8326 drivers
- Various HD-audio and USB-audio fixes and quirks
- A series of fixes for Cirrus CS35L56 codecs"
* tag 'sound-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits)
ALSA: usb-audio: Ignore clock selector errors for single connection
ALSA: hda/realtek: Enable headset mic on Vaio VJFE-ADL
ALSA: hda: cs35l56: Remove unused test stub function
ALSA: hda: cs35l56: Firmware file must match the version of preloaded firmware
ALSA: hda: cs35l56: Fix filename string field layout
ALSA: hda: cs35l56: Fix order of searching for firmware files
ASoC: cs35l56: Allow more time for firmware to boot
ASoC: cs35l56: Load tunings for the correct speaker models
ASoC: cs35l56: Firmware file must match the version of preloaded firmware
ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision
ASoC: cs35l56: Fix for initializing ASP1 mixer registers
ALSA: hda: cs35l56: Initialize all ASP1 registers
ASoC: cs35l56: Fix default SDW TX mixer registers
ASoC: cs35l56: Fix to ensure ASP1 registers match cache
ASoC: cs35l56: Remove buggy checks from cs35l56_is_fw_reload_needed()
ASoC: cs35l56: Don't add the same register patch multiple times
ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp
ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component
ASoC: wm_adsp: Don't overwrite fwf_name with the default
ASoC: wm_adsp: Fix firmware file search order
...
Pull power supply fix from Sebastian Reichel:
- qcom_battmgr: revert broken fix
* tag 'for-v6.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
Revert "power: supply: qcom_battmgr: Register the power supplies after PDR is up"
Pul iommu fixes from Joerg Roedel:
- Make iommu_ops->default_domain work without CONFIG_IOMMU_DMA to fix
initialization of FSL-PAMU devices
- Fix for Tegra fbdev initialization failure
- Fix for a VFIO device unbinding failure on PowerPC
* tag 'iommu-fixes-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
powerpc: iommu: Bring back table group release_ownership() call
drm/tegra: Do not assume that a NULL domain means no DMA IOMMU
iommu: Allow ops->default_domain to work when !CONFIG_IOMMU_DMA
Pull device mapper fixes from Mike Snitzer:
- Fix DM ioctl interface to avoid INT_MAX overflow warnings from
kvmalloc by limiting the number of targets and parameter size area.
- Fix DM stats to avoid INT_MAX overflow warnings from kvmalloc by
limiting the number of entries supported.
- Fix DM writecache to support mapping devices larger than 1 TiB by
switching from using kvmalloc_array to vmalloc_array -- which avoids
INT_MAX overflow in kvmalloc_node and associated warnings.
- Remove the (ab)use of tasklets from both the DM crypt and verity
targets. They will be converted to use BH workqueue in future.
* tag 'for-6.8/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-crypt, dm-verity: disable tasklets
dm writecache: allow allocations larger than 2GiB
dm stats: limit the number of entries
dm: limit the number of targets and parameter size area
Pull ata fix from Niklas Cassel:
- Following up on last week's ASMedia ASM1061 43-bit dma_mask quirk, we
sent an email to ASMedia developers that have previously been active
on the mailing list, asking exactly which SATA controllers that are
affected by this hardware limitation.
We got a reply that it affects all the SATA controllers in the
ASM106x family, thus extend the existing 43-bit dma_mask quirk to
apply to all the affected ASMedia SATA controllers.
* tag 'ata-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ahci: Extend ASM1061 43-bit DMA address quirk to other ASM106x parts
Another Fujitsu-related patch.
In the initial boot stage the integrated keyboard of Fujitsu Lifebook U728
refuses to work and it's not possible to type for example a dm-crypt
passphrase without the help of an external keyboard.
i8042.nomux kernel parameter resolves this issue but using that a PS/2
mouse is detected. This input device is unused even when the i2c-hid-acpi
kernel module is blacklisted making the integrated ELAN touchpad
(04F3:3092) not working at all.
So this notebook uses a hid-over-i2c touchpad which is managed by the
i2c_designware input driver. Since you can't find a PS/2 mouse port on this
computer and you can't connect a PS/2 mouse to it even with an official
port replicator I think it's safe to not use the PS/2 mouse port at all.
Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Link: https://lore.kernel.org/r/20240103014717.127307-2-szfabian@bluemarch.art
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Remove duplicated enums (Guixen)
- Use appropriate controller state accessors (Keith)
- Retryable authentication (Hannes)
- Add missing module descriptions (Chaitanya)
- Fibre-channel fixes for blktests (Daniel)
- Various type correctness updates (Caleb)
- Improve fabrics connection debugging prints (Nitin)
- Passthrough command verbose error logging (Adam)
- Fix for where we set IO priority in the bio for drivers that use
fops->submit_bio() to queue IO, like md/dm etc.
* tag 'block-6.8-2024-02-01' of git://git.kernel.dk/linux: (32 commits)
block: Fix where bio IO priority gets set
nvme: allow passthru cmd error logging
nvme-fc: show hostnqn when connecting to fc target
nvme-rdma: show hostnqn when connecting to rdma target
nvme-tcp: show hostnqn when connecting to tcp target
nvmet-fc: use RCU list iterator for assoc_list
nvmet-fc: take ref count on tgtport before delete assoc
nvmet-fc: avoid deadlock on delete association path
nvmet-fc: abort command when there is no binding
nvmet-fc: do not tack refs on tgtports from assoc
nvmet-fc: remove null hostport pointer check
nvmet-fc: hold reference on hostport match
nvmet-fc: free queue and assoc directly
nvmet-fc: defer cleanup using RCU properly
nvmet-fc: release reference on target port
nvmet-fcloop: swap the list_add_tail arguments
nvme-fc: do not wait in vain when unloading module
nvme-fc: log human-readable opcode on timeout
nvme: split out fabrics version of nvme_opcode_str()
nvme: take const cmd pointer in read-only helpers
...
Pull io_uring fixes from Jens Axboe:
- Fix for missing retry for read multishot.
If we trigger the execution of it and there's more than one buffer to
be read, then we don't always read more than the first one. As it's
edge triggered, this can lead to stalls.
- Limit inline receive multishot retries for fairness reasons.
If we have a very bursty socket receiving data, we still need to
ensure we process other requests as well. This is really two minor
cleanups, then adding a way for poll reissue to trigger a requeue,
and then finally having multishot receive utilize that.
- Fix for a weird corner case for non-multishot receive with
MSG_WAITALL, using provided buffers, and setting the length to
zero (to let the buffer dictate the receive size).
* tag 'io_uring-6.8-2024-02-01' of git://git.kernel.dk/linux:
io_uring/net: fix sr->len for IORING_OP_RECV with MSG_WAITALL and buffers
io_uring/net: limit inline multishot retries
io_uring/poll: add requeue return code from poll multishot handling
io_uring/net: un-indent mshot retry path in io_recv_finish()
io_uring/poll: move poll execution helpers higher up
io_uring/rw: ensure poll based multishot read retries appropriately
Pull arm64 fixes from Will Deacon:
"Two small fixes.
The first one is an alternative fix for the SCS patching problem we
thought we'd fixed in -rc1; it turned out not to be robust with all
toolchains/configs, so this is a revert+retry which has seen some more
testing.
The other one simply removes an unused header file, but I couldn't
resist the negative diffstat.
- Really fix shadow call stack patching with LTO=full
- Remove unused (empty) header file generated from the compat vDSO"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: vdso32: Remove unused vdso32-offsets.h
arm64: scs: Disable LTO for SCS patching code
arm64: Revert "scs: Work around full LTO issue with dynamic SCS"
When closing the laptop lid with an external screen connected, the mouse
pointer has a constant movement to the lower right corner. Opening the
lid again stops this movement, but after that the touchpad does no longer
register clicks.
The touchpad is connected both via i2c-hid and PS/2, the predecessor of
this device (NS70MU) has the same layout in this regard and also strange
behaviour caused by the psmouse and the i2c-hid driver fighting over
touchpad control. This fix is reusing the same workaround by just
disabling the PS/2 aux port, that is only used by the touchpad, to give the
i2c-hid driver the lone control over the touchpad.
v2: Rebased on current master
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231205163602.16106-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tasklets have an inherent problem with memory corruption. The function
tasklet_action_common calls tasklet_trylock, then it calls the tasklet
callback and then it calls tasklet_unlock. If the tasklet callback frees
the structure that contains the tasklet or if it calls some code that may
free it, tasklet_unlock will write into free memory.
The commits 8e14f61015 and d9a02e016a try to fix it for dm-crypt, but
it is not a sufficient fix and the data corruption can still happen [1].
There is no fix for dm-verity and dm-verity will write into free memory
with every tasklet-processed bio.
There will be atomic workqueues implemented in the kernel 6.9 [2]. They
will have better interface and they will not suffer from the memory
corruption problem.
But we need something that stops the memory corruption now and that can be
backported to the stable kernels. So, I'm proposing this commit that
disables tasklets in both dm-crypt and dm-verity. This commit doesn't
remove the tasklet support, because the tasklet code will be reused when
atomic workqueues will be implemented.
[1] https://lore.kernel.org/all/d390d7ee-f142-44d3-822a-87949e14608b@suse.de/T/
[2] https://lore.kernel.org/lkml/20240130091300.2968534-1-tj@kernel.org/
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 39d42fa96b ("dm crypt: add flags to optionally bypass kcryptd workqueues")
Fixes: 5721d4e5a9 ("dm verity: Add optional "try_verify_in_tasklet" feature")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Johan writes:
USB-serial device ids for 6.8-rc3
Here are some new device ids for 6.8-rc3.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.8-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Fibocom FM101-GL variant
USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
USB: serial: cp210x: add ID for IMST iM871A-USB
We get following warning with W=1:
drivers/dma/at_hdmac.c:243: warning: Function parameter or struct member 'boundary' not described in 'at_desc'
drivers/dma/at_hdmac.c:243: warning: Function parameter or struct member 'dst_hole' not described in 'at_desc'
drivers/dma/at_hdmac.c:243: warning: Function parameter or struct member 'src_hole' not described in 'at_desc'
drivers/dma/at_hdmac.c:243: warning: Function parameter or struct member 'memset_buffer' not described in 'at_desc'
drivers/dma/at_hdmac.c:243: warning: Function parameter or struct member 'memset_paddr' not described in 'at_desc'
drivers/dma/at_hdmac.c:243: warning: Function parameter or struct member 'memset_vaddr' not described in 'at_desc'
drivers/dma/at_hdmac.c:255: warning: Enum value 'ATC_IS_PAUSED' not described in enum 'atc_status'
drivers/dma/at_hdmac.c:255: warning: Enum value 'ATC_IS_CYCLIC' not described in enum 'atc_status'
drivers/dma/at_hdmac.c:287: warning: Function parameter or struct member 'cyclic' not described in 'at_dma_chan'
drivers/dma/at_hdmac.c:350: warning: Function parameter or struct member 'memset_pool' not described in 'at_dma'
Fix this by adding the required description and also drop unused struct
member 'cyclic' in 'at_dma_chan'
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20240130163216.633034-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The commit 2ad56efa80 ("powerpc/iommu: Setup a default domain and
remove set_platform_dma_ops") refactored the code removing the
set_platform_dma_ops(). It missed out the table group
release_ownership() call which would have got called otherwise
during the guest shutdown via vfio_group_detach_container(). On
PPC64, this particular call actually sets up the 32-bit TCE table,
and enables the 64-bit DMA bypass etc. Now after guest shutdown,
the subsequent host driver (e.g megaraid-sas) probe post unbind
from vfio-pci fails like,
megaraid_sas 0031:01:00.0: Warning: IOMMU dma not supported: mask 0x7fffffffffffffff, table unavailable
megaraid_sas 0031:01:00.0: Warning: IOMMU dma not supported: mask 0xffffffff, table unavailable
megaraid_sas 0031:01:00.0: Failed to set DMA mask
megaraid_sas 0031:01:00.0: Failed from megasas_init_fw 6539
The patch brings back the call to table_group release_ownership()
call when switching back to PLATFORM domain from BLOCKED, while
also separates the domain_ops for both.
Fixes: 2ad56efa80 ("powerpc/iommu: Setup a default domain and remove set_platform_dma_ops")
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/170628173462.3742.18330000394415935845.stgit@ltcd48-lp2.aus.stglab.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Timur pointed this out before, and it just slipped my mind,
but this might help some things work better, around pcie power
management.
Fixes: 8d55b0a940 ("nouveau/gsp: add some basic registry entries.")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/576336/
