In preparation for multiple scheduler support, separate out scx_kick_cpu()
from scx_bpf_kick_cpu() and add the @sch parameter to it. scx_bpf_kick_cpu()
now acquires an RCU read lock, reads $scx_root, and calls scx_kick_cpu()
with it if non-NULL. The passed in @sch parameter is not used yet.
Internal uses of scx_bpf_kick_cpu() are converted to scx_kick_cpu(). Where
$sch is available, it's used. In the pick_task_scx() path where no
associated scheduler can be identified, $scx_root is used directly. Note
that $scx_root cannot be NULL in this case.
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_qmap currently outputs verbose debug messages including cgroup operations
and CPU online/offline events by default, which can be noisy during normal
operation. While the existing -P option controls DSQ dumps and event
statistics, there's no way to suppress the other debug messages.
Split the debug output controls to make scx_qmap quieter by default. The -P
option continues to control DSQ dumps and event statistics
(print_dsqs_and_events), while a new -M option controls debug messages like
cgroup operations and CPU events (print_msgs). This allows users to run
scx_qmap with minimal output and selectively enable debug information as
needed.
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The qmap dump operation was destructively consuming queue entries while
displaying them. As dump can be triggered anytime, this can easily lead to
stalls. Add a temporary dump_store queue and modify the dump logic to pop
entries, display them, and then restore them back to the original queue.
This allows dump operations to be performed without affecting the
scheduler's queue state.
Note that if racing against new enqueues during dump, ordering can get
mixed up, but this is acceptable for debugging purposes.
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
ops.exit() may be called even if the loading failed before ops.init()
finishes successfully. This is because ops.exit() allows rich exit info
communication. Add SCX_EFLAG_INITIALIZED flag to scx_exit_info.flags to
indicate whether ops.init() finished successfully.
This enables BPF schedulers to distinguish between exit scenarios and
handle cleanup appropriately based on initialization state.
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Convert warned_zero_slice and warned_deprecated_rq in scx_sched struct to
single-bit bitfields. While this doesn't reduce struct size immediately,
it prepares for future bitfield additions.
v2: Update patch description.
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
task_can_run_on_remote_rq() takes @sch but it is using scx_root when
incrementing SCX_EV_DISPATCH_LOCAL_DSQ_OFFLINE, which is inconsistent and
gets in the way of implementing multiple scheduler support. Use @sch
instead. As currently scx_root is the only possible scheduler instance, this
doesn't cause any behavior changes.
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The comment for SCX_KF_DISPATCH was incomplete and didn't explain that
ops.dispatch() may temporarily release the rq lock, allowing ENQUEUE and
SELECT_CPU operations to be nested inside DISPATCH contexts.
Update the comment to clarify this nesting behavior and provide better
context for when these operations can occur within dispatch.
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The find_user_dsq() function is called from contexts that are already
under RCU read lock protection. Switch from rhashtable_lookup_fast() to
rhashtable_lookup() to avoid redundant RCU locking.
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_bpf_cpu_curr() has been introduced to retrieve the current task of a
given runqueue, allowing schedulers to interact with that task.
The kfunc assumes that it is always called in an RCU context, but this
is not always guaranteed and some BPF schedulers can trigger the
following warning:
WARNING: suspicious RCU usage
sched_ext: BPF scheduler "cosmos_1.0.2_gd0e71ca_x86_64_unknown_linux_gnu_debug" enabled
6.17.0-rc1 #1-NixOS Not tainted
-----------------------------
kernel/sched/ext.c:6415 suspicious rcu_dereference_check() usage!
...
Call Trace:
<IRQ>
dump_stack_lvl+0x6f/0xb0
lockdep_rcu_suspicious.cold+0x4e/0x96
scx_bpf_cpu_curr+0x7e/0x80
bpf_prog_c68b2b6b6b1b0ff8_sched_timerfn+0xce/0x1dc
bpf_timer_cb+0x7b/0x130
__hrtimer_run_queues+0x1ea/0x380
hrtimer_run_softirq+0x8c/0xd0
handle_softirqs+0xc9/0x3b0
__irq_exit_rcu+0x96/0xc0
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x73/0x80
</IRQ>
<TASK>
To address this, mark the kfunc with KF_RCU_PROTECTED, so the verifier
can enforce its usage only inside RCU-protected sections.
Note: this also requires commit 1512231b6c ("bpf: Enforce RCU protection
for KF_RCU_PROTECTED"), currently in bpf-next, to enforce the proper
KF_RCU_PROTECTED.
Fixes: 20b158094a ("sched_ext: Introduce scx_bpf_cpu_curr()")
Cc: Christian Loehle <christian.loehle@arm.com>
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Include the task's migration-disabled counter when dumping task state
during an error exit.
This can help diagnose cases where tasks can get stuck, because they're
unable to migrate elsewhere.
tj: s/nomig/no_mig/ for readability and consistency with other keys.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When printing the deprecation warning for scx_bpf_cpu_rq(), we may hit a
NULL pointer dereference if the kfunc is called before a BPF scheduler
is fully attached, for example, when invoked from a BPF timer or during
ops.init():
[ 50.752775] BUG: kernel NULL pointer dereference, address: 0000000000000331
...
[ 50.764205] RIP: 0010:scx_bpf_cpu_rq+0x30/0xa0
...
[ 50.787661] Call Trace:
[ 50.788398] <TASK>
[ 50.789061] bpf_prog_08f7fd2dcb187aaf_wakeup_timerfn+0x75/0x1a8
[ 50.792477] bpf_timer_cb+0x7e/0x140
[ 50.796003] hrtimer_run_softirq+0x91/0xe0
[ 50.796952] handle_softirqs+0xce/0x3c0
[ 50.799087] run_ksoftirqd+0x3e/0x70
[ 50.800197] smpboot_thread_fn+0x133/0x290
[ 50.802320] kthread+0x115/0x220
[ 50.804984] ret_from_fork+0x17a/0x1d0
[ 50.806920] ret_from_fork_asm+0x1a/0x30
[ 50.807799] </TASK>
Fix this by only printing the warning once the scheduler is fully
registered.
Fixes: 5c48d88fe0 ("sched_ext: deprecation warn for scx_bpf_cpu_rq()")
Cc: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Introduce a compatibility helper that allows BPF schedulers to use
scx_bpf_cpu_curr() on older kernels.
Fixes: 20b158094a ("sched_ext: Introduce scx_bpf_cpu_curr()")
Cc: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_bpf_cpu_rq() works on an unlocked rq which generally isn't safe.
For the common use-cases scx_bpf_locked_rq() and
scx_bpf_cpu_curr() work, so add a deprecation warning
to scx_bpf_cpu_rq() so it can eventually be removed.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Provide scx_bpf_cpu_curr() as a way for scx schedulers to check the curr
task of a remote rq without assuming its lock is held.
Many scx schedulers make use of scx_bpf_cpu_rq() to check a remote curr
(e.g. to see if it should be preempted). This is problematic because
scx_bpf_cpu_rq() provides access to all fields of struct rq, most of
which aren't safe to use without holding the associated rq lock.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Most fields in scx_bpf_cpu_rq() assume that its rq_lock is held.
Furthermore they become meaningless without rq lock, too.
Make a safer version of scx_bpf_cpu_rq() that only returns a rq
if we hold rq lock of that rq.
Also mark the new scx_bpf_locked_rq() as returning NULL as
scx_bpf_cpu_rq() should've been too.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
SCX hooks into CPU cgroup controller operations and read-locks
scx_cgroup_rwsem to exclude them while enabling and disable schedulers.
While this works, it's unnecessarily complicated given that
cgroup_[un]lock() are available and thus the cgroup operations can be locked
out that way.
Drop scx_cgroup_rwsem locking from the tg on/offline and cgroup [can_]attach
operations. Instead, grab cgroup_lock() from scx_cgroup_lock(). Drop
scx_cgroup_finish_attach() which is no longer necessary. Drop the now
unnecessary rcu locking and css ref bumping in scx_cgroup_init() and
scx_cgroup_exit().
As scx_cgroup_set_weight/bandwidth() paths aren't protected by
cgroup_lock(), rename scx_cgroup_rwsem to scx_cgroup_ops_rwsem and retain
the locking there.
This is overall simpler and will also allow enable/disable paths to
synchronize against cgroup changes independent of the CPU controller.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
scx_sched.event_stats_cpu is the percpu counters that are used to track
stats. Introduce struct scx_sched_pcpu and move the counters inside. This
will ease adding more per-cpu fields. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
There currently isn't a place to place SCX-internal types and accessors to
be shared between ext.c and ext_idle.c. Create kernel/sched/ext_internal.h
and move internal type and accessor definitions there. This trims ext.c a
bit and makes future additions easier. Pure code reorganization. No
functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
scx_enable() turns on the bypass mode while enable is in progress. If
enabling fails, it turns off the bypass mode and then triggers scx_error().
scx_error() will trigger scx_disable_workfn() which will turn on the bypass
mode again and unload the failed scheduler.
This moves the system out of bypass mode between the enable error path and
the disable path, which is unnecessary and can be brittle - e.g. the thread
running scx_enable() may already be on the failed scheduler and can be
switched out before it triggers scx_error() leading to a stall. The watchdog
would eventually kick in, so the situation isn't critical but is still
suboptimal.
There is nothing to be gained by turning off the bypass mode between
scx_enable() failure and scx_disable_workfn(). Keep bypass on.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
During tasks iteration, the locks can be dropped using
scx_task_iter_unlock() to perform e.g. sleepable allocations. Afterwards,
scx_task_iter_relock() has to be called prior to other iteration operations,
which is error-prone. This can be easily automated by tracking whether
scx_tasks_lock is held in scx_task_iter and re-acquiring when necessary. It
already tracks whether the task's rq is locked after all.
- Add scx_task_iter->list_locked which remembers whether scx_tasks_lock is
held.
- Rename scx_task_iter->locked to scx_task_iter->locked_task to better
distinguish it from ->list_locked.
- Replace scx_task_iter_relock() with __scx_task_iter_maybe_relock() which
is automatically called by scx_task_iter_next() and scx_task_iter_stop().
- Drop explicit scx_task_iter_relock() calls.
The resulting behavior should be equivalent.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Receive tools/sched_ext updates form https://github.com/sched-ext/scx to
sync userspace bits:
- basic BPF arena allocator abstractions,
- additional process flags definitions,
- fixed is_migration_disabled() helper,
- separate out user_exit_info BPF and user space code.
This also fixes the following warning when building the selftests:
tools/sched_ext/include/scx/common.bpf.h:550:9: warning: 'likely' macro redefined [-Wmacro-redefined]
550 | #define likely(x) __builtin_expect(!!(x), 1)
| ^
Co-developed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull turbostat updates from Len Brown:
"tools/power turbostat: version 2025.09.09
- Probe and display L3 Cache topology
- Add ability to average an added counter (useful for pre-integrated
"counters", such as Watts)
- Break the limit of 64 built-in counters
- Assorted bug fixes and minor feature tweaks"
* tag 'turbostat-2025.09.09' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.09.09
tools/power turbostat: Handle non-root legacy-uncore sysfs permissions
tools/power turbostat: standardize PER_THREAD_PARAMS
tools/power turbostat: Fix DMR support
tools/power turbostat: add format "average" for external attributes
tools/power turbostat: delete GET_PKG()
tools/power turbostat: probe and display L3 cache topology
tools/power turbostat: Support more than 64 built-in-counters
tools/power turbostat.8: Document Totl%C0, Any%C0, GFX%C0, CPUGFX% columns
tools/power turbostat: Fix bogus SysWatt for forked program
tools/power turbostat: Handle cap_get_proc() ENOSYS
tools/power turbostat: Fix build with musl
tools/power turbostat: verify arguments to params --show and --hide
tools/power turbostat: regression fix: --show C1E%
Pull smp fixes from Borislav Petkov:
- Remove an obsolete comment and fix spelling
* tag 'smp_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Remove obsolete comment from takedown_cpu()
smp: Fix spelling in on_each_cpu_cond_mask()'s doc-comment
Pull irq fixes from Borislav Petkov:
- Fix a wrong ioremap size in mvebu-gicp
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
* tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mvebu-gicp: Use resource_size() for ioremap()
irqchip: Build IMX_MU_MSI only on ARM
genirq/test: Resolve irq lock inversion warnings
irqchip/gic-v5: Remove IRQD_RESEND_WHEN_IN_PROGRESS for ITS IRQs
irqchip/gic-v5: iwb: Fix iounmap probe failure path
irqchip/mvebu-gicp: Clear pending interrupts on init
irqchip/msi-lib: Fix fwnode refcount in msi_lib_irq_domain_select()
irqchip/riscv-imsic: Don't dereference before NULL pointer check
Pull x86 fixes from Borislav Petkov:
- Fix an interrupt vector setup race which leads to a non-functioning
device
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
* tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Plug vector setup race
x86/cpu: Add new Intel CPU model numbers for Wildcatlake and Novalake
Pull locking fix from Borislav Petkov:
- Prevent a futex hash leak due to different mm lifetimes
* tag 'locking_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Move futex cleanup to __mmdrop()
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
Signed-off-by: Len Brown <len.brown@intel.com>
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/
may be readable by all, but
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz
may be readable only by root.
Non-root turbostat users see complaints in this scenario.
Fail probe of the interface if we can't read current_freq_khz.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Original-patch-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Together with the RAPL MSRs, there are more MSRs gone on DMR, including
PLR (Perf Limit Reasons), and IRTL (Package cstate Interrupt Response
Time Limit) MSRs. The configurable TDP info should also be retrieved
from TPMI based Intel Speed Select Technology feature.
Remove the access of these MSRs for DMR. Improve the DMR platform
feature table to make it more readable at the same time.
Fixes: 83075bd59d ("tools/power turbostat: Add initial support for DMR")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
External atributes with format "raw" are not printed in summary lines
for nodes/packages (or with option -S). The new format "average"
behaves like "raw" but also adds the summary data
Signed-off-by: Michael Hebenstreit <michael.hebenstreit@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
We have out-grown the ability to use a 64-bit memory location
to inventory every possible built-in counter.
Leverage the the CPU_SET(3) macros to break this barrier.
Also, break the Joules & Watts counters into two,
since we can no longer 'or' them together...
Signed-off-by: Len Brown <len.brown@intel.com>
Pull TTY fix from Greg KH:
"Here is a single revert of one of the previous patches that went in
the last tty/serial merge that is breaking userspace on some platforms
(specifically powerpc, probably a few others.)
It accidentially changed the ioctl values of some tty ioctls, which
breaks xorg.
The revert has been in linux-next all this week with no reported
issues"
* tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: vt: use _IO() to define ioctl numbers"
Pull EFI updates from Ard Biesheuvel:
- Expose the OVMF firmware debug log via sysfs
- Lower the default log level for the EFI stub to avoid corrupting any
splash screens with unimportant diagnostic output
* tag 'efi-next-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: add API doc entry for ovmf_debug_log
efistub: Lower default log level
efi: add ovmf debug log driver
Pull bpf fixes from Alexei Starovoitov:
- Fix memory leak of bpf_scc_info objects (Eduard Zingerman)
- Fix a regression in the 'perf' tool caused by moving UID filtering to
BPF (Ilya Leoshkevich)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
perf bpf-filter: Enable events manually
libbpf: Add the ability to suppress perf event enablement
bpf: Fix memory leak of bpf_scc_info objects
Pull more block updates from Jens Axboe:
- MD pull request via Yu:
- mddev null-ptr-dereference fix, by Erkun
- md-cluster fail to remove the faulty disk regression fix, by
Heming
- minor cleanup, by Li Nan and Jinchao
- mdadm lifetime regression fix reported by syzkaller, by Yu Kuai
- MD pull request via Christoph
- add support for getting the FDP featuee in fabrics passthru path
(Nitesh Shetty)
- add capability to connect to an administrative controller
(Kamaljit Singh)
- fix a leak on sgl setup error (Keith Busch)
- initialize discovery subsys after debugfs is initialized
(Mohamed Khalfella)
- fix various comment typos (Bjorn Helgaas)
- remove unneeded semicolons (Jiapeng Chong)
- nvmet debugfs ordering issue fix
- Fix UAF in the tag_set in zloop
- Ensure sbitmap shallow depth covers entire set
- Reduce lock roundtrips in io context lookup
- Move scheduler tags alloc/free out of elevator and freeze lock, to
fix some lockdep found issues
- Improve robustness of queue limits checking
- Fix a regression with IO priorities, if no io context exists
* tag 'block-6.17-20250808' of git://git.kernel.dk/linux: (26 commits)
lib/sbitmap: make sbitmap_get_shallow() internal
lib/sbitmap: convert shallow_depth from one word to the whole sbitmap
nvmet: exit debugfs after discovery subsystem exits
block, bfq: Reorder struct bfq_iocq_bfqq_data
md: make rdev_addable usable for rcu mode
md/raid1: remove struct pool_info and related code
md/raid1: change r1conf->r1bio_pool to a pointer type
block: ensure discard_granularity is zero when discard is not supported
zloop: fix KASAN use-after-free of tag set
block: Fix default IO priority if there is no IO context
nvme: fix various comment typos
nvme-auth: remove unneeded semicolon
nvme-pci: fix leak on sgl setup error
nvmet: initialize discovery subsys after debugfs is initialized
nvme: add capability to connect to an administrative controller
nvmet: add support for FDP in fabrics passthru path
md: rename recovery_cp to resync_offset
md/md-cluster: handle REMOVE message earlier
md: fix create on open mddev lifetime regression
block: fix potential deadlock while running nr_hw_queue update
...
Pull io_uring fixes from Jens Axboe:
- Allow vectorized payloads for send/send-zc - like sendmsg, but
without the hassle of a msghdr.
- Fix for an integer wrap that should go to stable, spotted by syzbot.
Nothing alarming here, as you need to be root to hit this.
Nevertheless, it should get fixed.
FWIW, kudos to the syzbot crew for having much nicer reproducers now,
and with nicely annotated source code as well. This is particularly
useful as syzbot uses the raw interface rather than liburing,
historically it's been difficult to turn a syzbot reproducer into a
meaningful test case. With the recent changes, not true anymore!
* tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux:
io_uring/memmap: cast nr_pages to size_t before shifting
io_uring/net: Allow to do vectorized send
Pull spi fixes from Mark Brown:
"There's one fix here for an issue with the CS42L43 where we were
allocating a single property for client devices as just that property
rather than a terminated array of properties like we are supposed to.
We also have an update to the MAINTAINERS file for some Renesas
devices"
* tag 'spi-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cs42l43: Property entry should be a null-terminated array
MAINTAINERS: Add entries for the RZ/V2H(P) RSPI
Pull regulator fix from Mark Brown:
"This fixes an issue with the newly added code for handling large
voltage changes on regulators which require that individual voltage
changes cover a limited range, the check for convergence was broken"
* tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: correct convergence check in regulator_set_voltage()
Pull regmap fixes from Mark Brown:
"These patches fix a lockdep issue Russell King reported with nested
regmap-irqs (unusual since regmap is generally for devices on slow
buses so devices don't get nested), plus add a missing mutex free
which I noticed while implementing a fix for that issue"
* tag 'regmap-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Avoid lockdep warnings with nested regmap-irq chips
regmap: irq: Free the regmap-irq mutex
Pull pci fix from Bjorn Helgaas:
- Fix vmd MSI interrupt domain restructure that caused crash early in
boot (Nam Cao)
* tag 'pci-v6.17-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: vmd: Fix wrong kfree() in vmd_msi_free()
Pull mailbox updates from Jassi Brar:
- aspeed: add driver and bindings for ast2700
- broadcom: add driver and bindings for bcm74110
- mediatek: fix RPM api usage
- qcom: use dev_fwnode
- pcc: support shared buffer
- misc dt-bindings cleanup
* tag 'mailbox-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox/pcc: support mailbox management of the shared buffer
mailbox: bcm74110: Fix spelling mistake
mailbox: bcm74110: remove unneeded semicolon
mailbox: aspeed: add mailbox driver for AST27XX series SoC
dt-bindings: mailbox: Add ASPEED AST2700 series SoC
dt-bindings: mailbox: Drop consumers example DTS
dt-bindings: mailbox: nvidia,tegra186-hsp: Use generic node name
dt-bindings: mailbox: Correct example indentation
dt-bindings: mailbox: ti,secure-proxy: Add missing reg maxItems
dt-bindings: mailbox: amlogic,meson-gxbb-mhu: Add missing interrupts maxItems
dt-bindings: mailbox: qcom-ipcc: document the Milos Inter-Processor Communication Controller
mailbox: Add support for bcm74110
dt-bindings: mailbox: Add support for bcm74110
mailbox: Use dev_fwnode()
mailbox: mtk-cmdq: Switch to pm_runtime_put_autosuspend()
Pull gpio updates from Bartosz Golaszewski:
"As discussed: there's a small commit that removes the legacy GPIO line
value setter callbacks as they're no longer used and a big, treewide
commit that renames the new ones to the old names across all GPIO
drivers at once.
While at it: there are also two fixes that I picked up over the course
of the merge window:
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion"
* tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
treewide: rename GPIO set callbacks back to their original names
gpio: remove legacy GPIO line value setter callbacks
gpio: mlxbf2: use platform_get_irq_optional()
Revert "gpio: pxa: Make irq_chip immutable"
Pull sound fixes from Takashi Iwai:
- Support for ASoC AMD ACP 7.2 with new IDs
- ASoC Intel AVS and SOF fixes
- Yet more kconfig adjustments for HD-audio codecs
- TAS2781 codec fixes
- Fixes for longstanding (rather minor) bugs in Intel LPE audio and
USB-audio drivers
* tag 'sound-fix-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/cirrus: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/hdmi: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/realtek: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/ca0132: Fix missing error handling in ca0132_alt_select_out()
ASoC: SOF: Intel: hda-sdw-bpt: fix SND_SOF_SOF_HDA_SDW_BPT dependencies
ALSA: hda/tas2781: Support L"SmartAmpCalibrationData" to save calibrated data
ALSA: intel_hdmi: Fix off-by-one error in __hdmi_lpe_audio_probe()
ALSA: hda/realtek: add LG gram 16Z90R-A to alc269 fixup table
ALSA: usb-audio: Don't use printk_ratelimit for debug prints
ASoC: Intel: sof_sdw: Add quirk for Alienware Area 51 (2025) 0CCC SKU
ASoC: tas2781: Fix the wrong step for TLV on tas2781
ASoC: amd: acp: Add SoundWire SOF machine driver support for acp7.2 platform
ASoC: amd: acp: Add SoundWire legacy machine driver support for acp7.2 platform
ASoC: amd: ps: Add SoundWire pci and dma driver support for acp7.2 platform
ASoC: SOF: amd: Add sof audio support for acp7.2 platform
ASoC: Intel: avs: Fix uninitialized pointer error in probe()
ASoC: wm8962: Clear master mode when enter runtime suspend
ASoC: SOF: amd: acp-loader: Use GFP_KERNEL for DMA allocations in resume context
Pull SoC fixes from Arnd Bergmann:
"These are a few patches to fix up bits that went missing during the
merge window: The tegra and s3c patches address trivial regressions
from conflicts, the bcm7445 makes the dt conform to the binding that
was made stricter"
* tag 'soc-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: tegra: Remove numa-node-id properties
ARM: s3c/gpio: complete the conversion to new GPIO value setters
ARM: dts: broadcom: Fix bcm7445 memory controller compatible
Pull xtensa update from Max Filippov:
- replace __ASSEMBLY__ with __ASSEMBLER__ in arch headers
* tag 'xtensa-20250808' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
xtensa: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
