Pull io_uring fix from Jens Axboe:
"Andres reported a regression with the fix that was merged earlier this
week, where his setup of using signals to interrupt io_uring CQ waits
no longer worked correctly.
Fix this, and also limit our use of TWA_SIGNAL to the case where we
need it, and continue using TWA_RESUME for task_work as before.
Since the original is marked for 5.7 stable, let's flush this one out
early"
* tag 'io_uring-5.8-2020-07-05' of git://git.kernel.dk/linux-block:
io_uring: fix regression with always ignoring signals in io_cqring_wait()
Pull i2c fixes from Wolfram Sang:
"The usual driver fixes and documentation updates"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mlxcpld: check correct size of maximum RECV_LEN packet
i2c: add Kconfig help text for slave mode
i2c: slave-eeprom: update documentation
i2c: eg20t: Load module automatically if ID matches
i2c: designware: platdrv: Set class based on DMI
i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665
Pull MIPS fixes from Thomas Bogendoerfer:
- fix for missing hazard barrier
- DT fix for ingenic
- DT fix of GPHY names for lantiq
- fix usage of smp_processor_id() while preemption is enabled
* tag 'mips_fixes_5.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Do not use smp_processor_id() in preemptible code
MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen
MIPS: ingenic: gcw0: Fix HP detection GPIO.
MIPS: lantiq: xway: sysctrl: fix the GPHY clock alias names
This resolves the hazard between the mtc0 in the change_c0_status() and
the mfc0 in configure_exception_vector(). Without resolving this hazard
configure_exception_vector() could read an old value and would restore
this old value again. This would revert the changes change_c0_status()
did. I checked this by printing out the read_c0_status() at the end of
per_cpu_trap_init() and the ST0_MX is not set without this patch.
The hazard is documented in the MIPS Architecture Reference Manual Vol.
III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev
6.03 table 8.1 which includes:
Producer | Consumer | Hazard
----------|----------|----------------------------
mtc0 | mfc0 | any coprocessor 0 register
I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU.
There the change_c0_status() function would activate the DSPen by
setting ST0_MX in the c0_status register. This was reverted and then the
system got a DSP exception when the DSP registers were saved in
save_dsp() in the first process switch. The crash looks like this:
[ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.107070] Kernel panic - not syncing: Unexpected DSP exception
[ 0.113470] Rebooting in 1 seconds..
We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs,
not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with
kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it
did not happen.
In the kernel I bisected this problem to commit 9012d01166 ("compiler:
allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was
reverted it also happened after commit 172dcd935c ("MIPS: Always
allocate exception vector for MIPSr2+").
Commit 0b24cae4d5 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.")
does similar changes to a different file. I am not sure if there are
more places affected by this problem.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull powerpc fixes from Michael Ellerman:
"One fix for a regression in our pkey handling, which exhibits as
PROT_EXEC mappings taking continuous page faults.
Thanks to: Jan Stancek, Aneesh Kumar K.V"
* tag 'powerpc-5.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm/pkeys: Make pkey access check work on execute_only_key
Pull arm64 fixes from Will Deacon:
"Nothing earth-shattering, really - some CPU errata workarounds (one
day they'll get it right, ha!) and a fix for a boot failure with very
large kernel images where the alternative patching gets confused when
patching relative branches using veneers.
- Fix alternative patching for very large kernel images and modules
- Hook up existing CPU errata workarounds for Qualcomm Kryo CPUs"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add KRYO4XX silver CPU cores to erratum list 1530923 and 1024718
arm64: Add KRYO4XX gold CPU cores to erratum list 1463225 and 1418040
arm64: Add MIDR value for KRYO4XX gold CPU cores
arm64/alternatives: use subsections for replacement sequences
When switching to TWA_SIGNAL for task_work notifications, we also made
any signal based condition in io_cqring_wait() return -ERESTARTSYS.
This breaks applications that rely on using signals to abort someone
waiting for events.
Check if we have a signal pending because of queued task_work, and
repeat the signal check once we've run the task_work. This provides a
reliable way of telling the two apart.
Additionally, only use TWA_SIGNAL if we are using an eventfd. If not,
we don't have the dependency situation described in the original commit,
and we can get by with just using TWA_RESUME like we previously did.
Fixes: ce593a6c48 ("io_uring: use signal based task_work running")
Cc: stable@vger.kernel.org # v5.7
Reported-by: Andres Freund <andres@anarazel.de>
Tested-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull xen fixes from Juergen Gross:
"One small cleanup patch for ARM and two patches for the xenbus driver
fixing latent problems (large stack allocations and bad return code
settings)"
* tag 'for-linus-5.8b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: let xenbus_map_ring_valloc() return errno values only
xen/xenbus: avoid large structs and arrays on the stack
arm/xen: remove the unused macro GRANT_TABLE_PHYSADDR
I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the
SMBus 2.0 specs. I don't see a reason to add 1 here. Also, fix the errno
to what is suggested for this error.
Fixes: c9bfdc7c16 ("i2c: mlxcpld: Add support for smbus block read transaction")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Michael Shych <michaelsh@mellanox.com>
Tested-by: Michael Shych <michaelsh@mellanox.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Pull sysctl fix from Al Viro:
"Another regression fix for sysctl changes this cycle..."
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Call sysctl_head_finish on error
The driver can't be loaded automatically because it misses
module alias to be provided. Add corresponding MODULE_DEVICE_TABLE()
call to the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Current AMD's zen-based APUs use this core for some of its i2c-buses.
With this patch we re-enable autodetection of hwmon-alike devices, so
lm-sensors will be able to work automatically.
It does not affect the boot-time of embedded devices, as the class is
set based on the DMI information.
DMI is probed only on Qtechnology QT5222 Industrial Camera Platform.
DocLink: https://qtec.com/camera-technology-camera-platforms/
Fixes: 3eddad96c4 ("i2c: designware: reverts "i2c: designware: Add support for AMD I2C controller"")
Signed-off-by: Ricardo Ribalda <ribalda@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PCA9665 datasheet says that I2CSTA = 78h indicates that SCL is stuck
low, this differs to the PCA9564 which uses 90h for this indication.
Treat either 0x78 or 0x90 as an indication that the SCL line is stuck.
Based on looking through the PCA9564 and PCA9665 datasheets this should
be safe for both chips. The PCA9564 should not return 0x78 for any valid
state and the PCA9665 should not return 0x90.
Fixes: eff9ec95ef ("i2c-algo-pca: Add PCA9665 support")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Pull cifs fixes from Steve French:
"Eight cifs/smb3 fixes, most when specifying the multiuser mount flag.
Five of the fixes are for stable"
* tag '5.8-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: prevent truncation from long to int in wait_for_free_credits
cifs: Fix the target file was deleted when rename failed.
SMB3: Honor 'posix' flag for multiuser mounts
SMB3: Honor 'handletimeout' flag for multiuser mounts
SMB3: Honor lease disabling for multiuser mounts
SMB3: Honor persistent/resilient handle flags for multiuser mounts
SMB3: Honor 'seal' flag for multiuser mounts
cifs: Display local UID details for SMB sessions in DebugData
Pull hwmon fixes from Guenter Roeck:
- Fix typo in Kconfig SENSORS_IR35221 option
- Fix potential memory leak in acpi_power_meter_add()
- Make sure the OVERT mask is set correctly in max6697 driver
- In PMBus core, fix page vs. register when accessing fans
- Mark is_visible functions static in bt1-pvt driver
- Define Temp- and Volt-to-N poly as maybe-unused in bt1-pvt driver
* tag 'hwmon-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus) fix a typo in Kconfig SENSORS_IR35221 option
hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add()
hwmon: (max6697) Make sure the OVERT mask is set correctly
hwmon: (pmbus) Fix page vs. register when accessing fans
hwmon: (bt1-pvt) Mark is_visible functions static
hwmon: (bt1-pvt) Define Temp- and Volt-to-N poly as maybe-unused
Merge misc fixes from Andrew Morton:
"Subsystems affected by this patch series: mm/hugetlb, samples, mm/cma,
mm/vmalloc, mm/pagealloc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/page_alloc: fix documentation error
vmalloc: fix the owner argument for the new __vmalloc_node_range callers
mm/cma.c: use exact_nid true to fix possible per-numa cma leak
samples/vfs: avoid warning in statx override
mm/hugetlb.c: fix pages per hugetlb calculation
Calling cma_declare_contiguous_nid() with false exact_nid for per-numa
reservation can easily cause cma leak and various confusion. For example,
mm/hugetlb.c is trying to reserve per-numa cma for gigantic pages. But it
can easily leak cma and make users confused when system has memoryless
nodes.
In case the system has 4 numa nodes, and only numa node0 has memory. if
we set hugetlb_cma=4G in bootargs, mm/hugetlb.c will get 4 cma areas for 4
different numa nodes. since exact_nid=false in current code, all 4 numa
nodes will get cma successfully from node0, but hugetlb_cma[1 to 3] will
never be available to hugepage will only allocate memory from
hugetlb_cma[0].
In case the system has 4 numa nodes, both numa node0&2 has memory, other
nodes have no memory. if we set hugetlb_cma=4G in bootargs, mm/hugetlb.c
will get 4 cma areas for 4 different numa nodes. since exact_nid=false in
current code, all 4 numa nodes will get cma successfully from node0 or 2,
but hugetlb_cma[1] and [3] will never be available to hugepage as
mm/hugetlb.c will only allocate memory from hugetlb_cma[0] and
hugetlb_cma[2]. This causes permanent leak of the cma areas which are
supposed to be used by memoryless node.
Of cource we can workaround the issue by letting mm/hugetlb.c scan all cma
areas in alloc_gigantic_page() even node_mask includes node0 only. that
means when node_mask includes node0 only, we can get page from
hugetlb_cma[1] to hugetlb_cma[3]. But this will cause kernel crash in
free_gigantic_page() while it wants to free page by:
cma_release(hugetlb_cma[page_to_nid(page)], page, 1 << order)
On the other hand, exact_nid=false won't consider numa distance, it might
be not that useful to leverage cma areas on remote nodes. I feel it is
much simpler to make exact_nid true to make everything clear. After that,
memoryless nodes won't be able to reserve per-numa CMA from other nodes
which have memory.
Fixes: cf11e85fc0 ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andreas Schaufler <andreas.schaufler@gmx.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200628074345.27228-1-song.bao.hua@hisilicon.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Something changed recently to uncover this warning:
samples/vfs/test-statx.c:24:15: warning: `struct foo' declared inside parameter list will not be visible outside of this definition or declaration
24 | #define statx foo
| ^~~
Which is due the use of "struct statx" (here, "struct foo") in a function
prototype argument list before it has been defined:
int
# 56 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h"
foo
# 56 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h" 3 4
(int __dirfd, const char *__restrict __path, int __flags,
unsigned int __mask, struct
# 57 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h"
foo
# 57 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h" 3 4
*__restrict __buf)
__attribute__ ((__nothrow__ , __leaf__)) __attribute__ ((__nonnull__ (2, 5)));
Add explicit struct before #include to avoid warning.
Fixes: f1b5618e01 ("vfs: Add a sample program for the new mount API")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/202006282213.C516EA6@keescook
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The routine hpage_nr_pages() was incorrectly used to calculate the number
of base pages in a hugetlb page. hpage_nr_pages is designed to be called
for THP pages and will return HPAGE_PMD_NR for hugetlb pages of any size.
Due to the context in which hpage_nr_pages was called, it is unlikely to
produce a user visible error. The routine with the incorrect call is only
exercised in the case of hugetlb memory error or migration. In addition,
this would need to be on an architecture which supports huge page sizes
less than PMD_SIZE. And, the vma containing the huge page would also need
to smaller than PMD_SIZE.
Fixes: c0d0381ade ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization")
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200629185003.97202-1-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull xfs fix from Darrick Wong:
"Fix a use-after-free bug when the fs shuts down"
* tag 'xfs-5.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix use-after-free on CIL context on shutdown
Pull PCI fix from Bjorn Helgaas:
"Fix a pcie_find_root_port() simplification that broke power management
because it didn't handle the edge case of finding the Root Port of a
Root Port itself (Mika Westerberg)""
* tag 'pci-v5.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Make pcie_find_root_port() work for Root Ports
Pull ACPI updates from Rafael Wysocki:
"Add a new device ID for Intel Tiger Lake to the DPTF battery
participant driver (Srinivas Pandruvada) and fix the Tiger Lake fan
device ID (Sumeet Pawnikar)"
* tag 'acpi-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: fan: Fix Tiger Lake ACPI device ID
ACPI: DPTF: Add battery participant for TigerLake
Pull gfs2 fixes from Andreas Gruenbacher:
"Various gfs2 fixes"
* tag 'gfs2-v5.8-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: The freeze glock should never be frozen
gfs2: When freezing gfs2, use GL_EXACT and not GL_NOCACHE
gfs2: read-only mounts should grab the sd_freeze_gl glock
gfs2: freeze should work on read-only mounts
gfs2: eliminate GIF_ORDERED in favor of list_empty
gfs2: Don't sleep during glock hash walk
gfs2: fix trans slab error when withdraw occurs inside log_flush
gfs2: Don't return NULL from gfs2_inode_lookup
Pull drm fixes from Dave Airlie:
"Pretty usual rc4 pull: two usual amdgpu, i915 pulls, and some misc arm
driver fixes.
The bigger bit is including the asm sources for some GPU shaders that
were contained in the i915 driver, otherwise it's pretty much business
as usual.
dma-buf:
- fix a use-after-free bug
amdgpu:
- Fix for vega20 boards without RAS support
- DC bandwidth revalidation fix
- Fix Renoir vram info fetching
- Fix hwmon freq printing
i915:
- GVT fixes
- Two missed MMIO handler fixes for SKL/CFL
- Fix mask register bits check
- Fix one lockdep error for debugfs entry access
- Include asm sources for render cache clear batches
msm:
- memleak fix
- display block fix
- address space fixes
exynos:
- error value and reference count fix
- error print removal
sun4i:
- remove HPD polling"
* tag 'drm-fixes-2020-07-03' of git://anongit.freedesktop.org/drm/drm: (22 commits)
drm/amdgpu: use %u rather than %d for sclk/mclk
drm/amdgpu/atomfirmware: fix vram_info fetching for renoir
drm/amd/display: Only revalidate bandwidth on medium and fast updates
drm: sun4i: hdmi: Remove extra HPD polling
drm/i915: Include asm sources for {ivb, hsw}_clear_kernel.c
drm/exynos: fix ref count leak in mic_pre_enable
drm/exynos: Properly propagate return value in drm_iommu_attach_device()
drm/exynos: Remove dev_err() on platform_get_irq() failure
drm/amd/powerplay: Fix NULL dereference in lock_bus() on Vega20 w/o RAS
dma-buf: Move dma_buf_release() from fops to dentry_ops
drm/msm: Fix up the rest of the messed up address sizes
drm/msm: Fix setup of a6xx create_address_space.
drm/msm: Fix address space size after refactor.
drm/i915/gvt: Use GFP_ATOMIC instead of GFP_KERNEL in atomic context
drm/i915/gvt: Fix incorrect check of enabled bits in mask registers
drm/i915/gvt: Fix two CFL MMIO handling caused by regression.
drm/i915/gvt: Add one missing MMIO handler for D_SKL_PLUS
drm/msm: Fix 0xfffflub in "Refactor address space initialization"
drm/msm/dpu: allow initialization of encoder locks during encoder init
drm/msm/dpu: fix error return code in dpu_encoder_init
...
This error path returned directly instead of calling sysctl_head_finish().
Fixes: ef9d965bc8 ("sysctl: reject gigantic reads/write to sysctl files")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Before this patch, some gfs2 code locked the freeze glock with LM_FLAG_NOEXP
(Do not freeze) flag, and some did not. We never want to freeze the freeze
glock, so this patch makes it consistently use LM_FLAG_NOEXP always.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, the freeze code in gfs2 specified GL_NOCACHE in
several places. That's wrong because we always want to know the state
of whether the file system is frozen.
There was also a problem with freeze/thaw transitioning the glock from
frozen (EX) to thawed (SH) because gfs2 will normally grant glocks in EX
to processes that request it in SH mode, unless GL_EXACT is specified.
Therefore, the freeze/thaw code, which tried to reacquire the glock in
SH mode would get the glock in EX mode, and miss the transition from EX
to SH. That made it think the thaw had completed normally, but since the
glock was still cached in EX, other nodes could not freeze again.
This patch removes the GL_NOCACHE flag to allow the freeze glock to be
cached. It also adds the GL_EXACT flag so the glock is fully transitioned
from EX to SH, thereby allowing future freeze operations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, only read-write mounts would grab the freeze
glock in read-only mode, as part of gfs2_make_fs_rw. So the freeze
glock was never initialized. That meant requests to freeze, which
request the glock in EX, were granted without any state transition.
That meant you could mount a gfs2 file system, which is currently
frozen on a different cluster node, in read-only mode.
This patch makes read-only mounts lock the freeze glock in SH mode,
which will block for file systems that are frozen on another node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function freeze_go_sync, called when promoting
the freeze glock, was testing for the SDF_JOURNAL_LIVE superblock flag.
That's only set for read-write mounts. Read-only mounts don't use a
journal, so the bit is never set, so the freeze never happened.
This patch removes the check for SDF_JOURNAL_LIVE for freeze requests
but still checks it when deciding whether to flush a journal.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In several places, we used the GIF_ORDERED inode flag to determine
if an inode was on the ordered writes list. However, since we always
held the sd_ordered_lock spin_lock during the manipulation, we can
just as easily check list_empty(&ip->i_ordered) instead.
This allows us to keep more than one ordered writes list to make
journal writing improvements.
This patch eliminates GIF_ORDERED in favor of checking list_empty.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Pull m68knommu mm fixes from Greg Ungerer:
"Two critical mm related fixes that affect booting of m68k/ColdFire
devices.
Both fix problems caused by recent system init memblock changes"
* tag 'm68knommu-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: mm: fix node memblock init
m68k: nommu: register start of the memory with memblock
Pull devicetree fixes from Rob Herring:
- Sync dtc to upstream to pick up fixes for I2C bus checks and quiet
warnings
- Various fixes for DT binding check warnings
- A couple of build fixes/improvements for binding checks
- ReST formatting improvements for writing-schema.rst
- Document reference fixes
* tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: clock: imx: Fix e-mail address
dt-bindings: thermal: k3: Fix the reg property
dt-bindings: thermal: Remove soc unit address
dt-bindings: display: arm: versatile: Pass the sysreg unit name
dt-bindings: usb: aspeed: Remove the leading zeroes
dt-bindings: copy process-schema-examples.yaml to process-schema.yaml
dt-bindings: do not build processed-schema.yaml for 'make dt_binding_check'
dt-bindings: fix error in 'make clean' after 'make dt_binding_check'
dt-bindings: mailbox: zynqmp_ipi: fix unit address
dt-bindings: bus: uniphier-system-bus: fix warning in example
scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c
doc: devicetree: bindings: fix spelling mistake
docs: dt: minor adjustments at writing-schema.rst
dt: fix reference to olpc,xo1.75-ec.txt
dt: Fix broken references to renamed docs
dt: fix broken links due to txt->yaml renames
dt: update a reference for reneases pcar file renamed to yaml
Pull data race annotation from Christian Brauner:
"This contains an annotation patch for a data race in copy_process()
reported by KCSAN when reading and writing nr_threads.
The data race is intentional and benign. This is obvious from the
comment above the relevant code and based on general consensus when
discussing this issue. So simply using data_race() to annotate this as
an intentional race seems the best option"
* tag 'for-linus-2020-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fork: annotate data race in copy_process()
Pull tpm fixes from Jarkko Sakkinen:
"These are just fixes for bugs found lately.
All of them are small scale things here and there, and all of them are
for previous kernel releases (the oldest appeared in v2.6.17)"
* tag 'tpmdd-next-v5.8-rc4' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm_tis: Remove the HID IFX0102
tpm_tis_spi: Prefer async probe
tpm: ibmvtpm: Wait for ready buffer before probing for TPM2 attributes
tpm/st33zp24: fix spelling mistake "drescription" -> "description"
tpm_tis: extra chip->ops check on error path in tpm_tis_core_init
tpm_tis_spi: Don't send anything during flow control
tpm: Fix TIS locality timeout problems
Pull kselftest fixes from Shuah Khan:
"tpm test fixes from Jarkko Sakkinen"
* tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tpm: Use /bin/sh instead of /bin/bash
selftests: tpm: Use 'test -e' instead of 'test -f'
Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test"
Pull kunit fixes from Shuah Khan
"Fixes for build and run-times failures.
Also includes troubleshooting tips updates to kunit user
documentation"
* tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: Add some troubleshooting tips to the FAQ
kunit: kunit_tool: Fix invalid result when build fails
kunit: show error if kunit results are not present
kunit: kunit_config: Fix parsing of CONFIG options with space
Pull nfsd fixes from Bruce Fields:
"Fixes for a umask bug on exported filesystems lacking ACL support, a
leak and a module unloading bug in the /proc/fs/nfsd/clients/ code,
and a compile warning"
* tag 'nfsd-5.8-1' of git://linux-nfs.org/~bfields/linux:
SUNRPC: Add missing definition of ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
nfsd: fix nfsdfs inode reference count leak
nfsd4: fix nfsdfs reference count loop
nfsd: apply umask on fs without ACL support
Pull block fixes from Jens Axboe:
- Use kvfree_sensitive() for the block keyslot free (Eric)
- Sync blk-mq debugfs flags (Hou)
- Memory leak fix in virtio-blk error path (Hou)
* tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
virtio-blk: free vblk-vqs in error path of virtblk_probe()
block/keyslot-manager: use kvfree_sensitive()
blk-mq-debugfs: update blk_queue_flag_name[] accordingly for new flags
Pull io_uring fixes from Jens Axboe:
"One fix in here, for a regression in 5.7 where a task is waiting in
the kernel for a condition, but that condition won't become true until
task_work is run. And the task_work can't be run exactly because the
task is waiting in the kernel, so we'll never make any progress.
One example of that is registering an eventfd and queueing io_uring
work, and then the task goes and waits in eventfd read with the
expectation that it'll get woken (and read an event) when the io_uring
request completes. The io_uring request is finished through task_work,
which won't get run while the task is looping in eventfd read"
* tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
io_uring: use signal based task_work running
task_work: teach task_work_add() to do signal_wake_up()
