The ADXL345 uses a fixed threshold resolution of 62.5 mg/LSB for
event-related registers. Previously, the driver reported raw
values without a scale factor.
Implement IIO_EV_INFO_SCALE for all event types to provide the
conversion factor (0.612915 m/s^2) as required by the IIO ABI.
Consequently, remove the obsolete comment in adxl345_read_event_value()
which stated that the scale factor is not applied.
Add explicit write rejection for IIO_EV_INFO_SCALE in
adxl345_write_event_value() returning -EINVAL.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADXL345 uses a single hardware register (ADXL345_REG_THRESH_TAP) to
store the threshold for both single tap and double tap events.
Currently, the driver only exposes the IIO_EV_INFO_VALUE attribute for
the single tap event.
However, the IIO ABI dictates that if an event is supported, its
associated configuration attributes should be exposed to userspace. This
applies even if writing to one channel property alters the value of
another due to shared underlying hardware state.
Add IIO_EV_INFO_VALUE to the double tap event specification to ensure
full ABI compliance.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Implement support for IIO_EV_INFO_SCALE in the internal enum
iio_event_info to allow proper ABI compliance.
This allows drivers (like the ADXL345) to expose event scale
attributes using the standard IIO ABI rather than manual
device attributes.
Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Correct several grammatical errors, typos, and pluralization issues
throughout the ADXL345 documentation.
Key changes include:
- Changing 'generic' to 'general-purpose'
- Correcting 'axis' to 'axes' in multiple tables and descriptions
- Improving phrasing in the device attributes section
- Fixing 'latent' to 'latency' in usage examples
- Sorting the existing event attribute table alphabetically for
better readability and to establish a clean baseline for future
additions.
Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the correct kernel-doc notation for struct members to eliminate
kernel-doc warnings:
Warning: include/linux/platform_data/tsl2772.h:88 struct member
'prox_diode' not described in 'tsl2772_settings'
Warning: include/linux/platform_data/tsl2772.h:88 struct member
'prox_power' not described in 'tsl2772_settings'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver currently defines device attributes using symbolic permission
flags (S_IRUGO and S_IWUSR). Update these to use octal permissions (0444
and 0200) to resolve checkpatch warnings.
Signed-off-by: Bhargav Joshi <rougueprince47@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Platform data pointer dereferences for pll1_charge_pump_current_nA and
pll2_charge_pump_current_nA were split across multiple lines. Bring the
dereference chains onto a single line.
This resolves the following checkpatch.pl warnings:
WARNING: Avoid multiple line dereference - prefer 'pdata->pll1_charge_pump_current_nA'
WARNING: Avoid multiple line dereference - prefer 'pdata->pll2_charge_pump_current_nA'
Signed-off-by: Bhargav Joshi <rougueprince47@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The macros AD9523_CLK_DIST_DIV_PHASE_REV(x) and
AD9523_CLK_DIST_DIV_REV(x) implicitly relied on the variable named 'ret'
instead of using passed argument '(x)'. Update the macros to explicitly
use the argument '(x)' for their operations.
This also resolves the following checkpatch.pl warning: Argument '(x)'
is not used in function-like macro.
Signed-off-by: Bhargav Joshi <rougueprince47@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove the AD9000_CHANNELS_PER_PHASE macro which is unused, has a
misspelled prefix (AD9000 instead of ADE9000), and has an incorrect
value (10 instead of 11, there are 33 total channels and 3 phases, so 11
per phase).
Signed-off-by: Giorgi Tchankvetadze <giorgitchankvetadze1997@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce a local struct device pointer in functions that reference
&spi->dev for device-managed resource calls and device property reads,
improving code readability.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce a local struct device pointer in functions that reference
&spi->dev for device-managed resource calls and device property reads,
improving code readability.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce a local struct device pointer in functions that reference
&spi->dev for device-managed resource calls and device property reads,
improving code readability.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce a local struct device pointer in functions that reference
&spi->dev for device-managed resource calls and device property reads,
improving code readability.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce a local struct device pointer in functions that reference
&spi->dev for device-managed resource calls and device property reads,
improving code readability.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce a local struct device pointer in functions that reference
&spi->dev for device-managed resource calls and device property reads,
improving code readability.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Place the opening brace of ad7173_calc_openwire_thrsh_raw() on its own
line to comply with the kernel coding style for function definitions.
Issue found by checkpatch.
Signed-off-by: Giorgi Tchankvetadze <giorgitchankvetadze1997@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver name should be easily greppable and clearly spelled.
Replace a level of indirection and explicitly use string literal.
While at it, remove useless blank lines before module_*() and
MODULE_*() macros.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Return directly from the switch cases which makes code easier to follow.
In some cases convert pieces to the standard pattern which also unifies
it with the accepted kernel practices.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of using byte arrays and then explicit castings, change
the types of byte arrays to be __le16 and update the endianness
conversions accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The function gp2ap020a00f_get_thresh_reg() can return -EINVAL in its
error path. Yet, the function has return type of u8. Added error
checking for gp2ap020a00f_get_thresh_reg() return value.
Detected by Smatch:
drivers/iio/light/gp2ap020a00f.c:1013 gp2ap020a00f_get_thresh_reg() warn:
signedness bug returning '(-22)'
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the guard() cleanup handler to manage the device lock.
This simplifies the code by removing the need for manual unlocking
and goto error handling paths.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The return value of at91_ts_sample() is never checked by its caller.
Change the return type to void to make this explicit. The error
conditions are already logged via dev_err() which provides sufficient
visibility into hardware issues.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for the following digital step attenuators:
- HMC271A: 1dB LSB 5-Bit Digital Attenuator SMT, 0.7 - 3.7 GHz
- ADRF5720: 0.5 dB LSB, 6-Bit, Digital Attenuator, 9 kHz to 40 GHz
- ADRF5730: 0.5 dB LSB, 6-Bit, Digital Attenuator, 100 MHz to 40 GHz
- ADRF5731: 2 dB LSB, 4-Bit, Digital Attenuator, 100 MHz to 40 GHz
- HMC1018A: 1.0 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, 0.1 - 30 GHz
- HMC1019A: 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, 0.1 - 30 GHz
Additionally, copyright notice was updated with current year.
Co-developed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Co-developed-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some parts may consume enable GPIO to enable serial mode
(HMC1119's and HMC792A P/S pin) or powerup the device
(e.g. ADA4961's PWUP pin).
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drop the enum ID, split chip info table into per-device structs and add
of_match_table. Additionally, add 'name' field into the chip info struct,
dropping the usage of spi_get_device_id().
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drop switch case on the enum ID in favor of extended chip info table,
containing:
- gain_step, indicating with sign the start of the code range;
- num_channels, to indicate the number IIO channels;
- pack_code() function to describe how SPI buffer is populated;
Which allowed for a simplified read_raw() and write_raw() callbacks. The
probe() function was adjusted accordingly. The linux/array_size.h include
is removed as number of channels is provided by chip info table.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove reset_gpio from the device state struct and use the reset_control
interface instead, using a local variable, as it is not being used
anywhere else. The reset controller init is moved out from the switch case
and optionally initialized for every device variant. Although not all
devices have a reset pin the code does not need to change if it is not
wired.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adhere modern device resource management with the following:
- Voltage regulator managed and enabled internally;
- IIO device registration handled with devm_iio_device_register();
- removal of goto's from the probe function;
- ad8366_remove() removed as it is not needed anymore;
With the drop of goto's dev_err_probe() is used to report probe errors.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adopt proper mutex lifecycle with devm_mutex_init(), replacing
mutex_init(). Mutex init is moved up (before regulator init),
so that goto statement in the error path is avoided (which will
be cleaned up later).
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Create local device pointer in the probe function to shorten lines, making
the code easier to read. The local device pointer replaces &spi->dev and
will be reused across other probe function places in later patches.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Apply IWYU principle, removing the following headers:
- linux/device.h: no usage of devm_add_action_or_reset, device_attr...
- linux/kernel.h: no usage of container_of, kasprintf, ...
- linux/slab.h: memory management handled by iio
- linux/sysfs.h: sysfs interaction is managed by iio
- linux/iio/sysfs.h: not using iio device attributes in this driver
Adding the following missing headers:
+ linux/array_size.h: for ARRAY_SIZE
+ linux/bits.h: for BIT
+ linux/dev_printk.h: for dev_err
+ linux/math.h: for abs
+ linux/mutex.h: for mutex_lock, mutex_unlock
+ linux/mod_devicetable.h: for spi_device_id
+ linux/types.h for NULL, __aligned
Additionally, those include directives are alphabetically sorted.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add device tree binding documentation for amplifiers and digital
attenuators. This covers different device variants with similar
SPI control. Each device has its own gain range and step, hence
no fallback compatibles are used.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace dev_err() + return with dev_err_probe() in ade9000_reset(),
which is called during probe. This simplifies error handling.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use devm_add_action_or_reset() instead of devres_alloc() and
devres_add(), which works the same. This will simplify the
code. There is no functional changes.
While at it, inline devm_iio_kfifo_allocate() into its only user.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The else in admv8818_init() is unnecessary since the if block already
returns after calling admv8818_rfin_band_select() when clkin is present.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
