fs_holder_ops recovers the owning superblock from bdev->bd_holder, which
forces the holder to be exactly one superblock and prevents several
superblocks from sharing one block device. That's what erofs is doing.
As a first step introduce a global dev_t-keyed rhltable mapping each
device to the superblock(s) using it. The entry is preallocated in
alloc_super() and registered under sb->s_dev by the set callback through
set_anon_super() and set_bdev_super(), the two helpers every set
callback assigns s_dev through. Registration is the final fallible act
of a set callback, so an insert failure unwinds through sget_fc()'s
existing set-failure path: the fs_context keeps ownership of s_fs_info
and the callers' error paths stay correct. set_anon_super() releases
the anonymous dev it allocated when registration fails. Unwinding
through deactivate_locked_super() instead would run kill_sb() and free
s_fs_info behind the caller's back: nfs and ceph free that object
through a local pointer when sget_fc() fails and would double-free.
The superblock stashes the entry in sb->s_super_dev and
kill_super_notify() drops the claim through it, so teardown doesn't
depend on s_dev staying stable; an entry that was never registered is
freed together with the superblock in destroy_super_work().
Each table entry holds a passive reference (s_passive) on its
superblock, so the struct stays valid for as long as the entry is
reachable. Entries are claim-counted through sd_ref: additional claims
on the same (device, superblock) pair share the entry, and the unlink
is deferred to the last put, so a later iteration cursor never resumes
from a removed node.
The table is initialized from mnt_init(): the first superblocks (the
tmpfs shm mount and rootfs) are created from start_kernel() long before
any initcall runs, so an initcall would be too late.
The table has no readers yet; the fs_holder_ops callbacks are switched
over once all devices a filesystem claims are registered.
Link: https://patch.msgid.link/20260616-work-super-bdev_holder_global-v2-7-7df6b864028e@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
ocfs2_dismount_volume() has reset sb->s_dev to zero since the original
merge in ccd979bdbc ("[PATCH] OCFS2: The Second Oracle Cluster
Filesystem") as part of scrubbing the super_block. Nothing reads the
field afterwards: all ocfs2-internal uses are mount-time log and trace
prints, and dev_t-keyed superblock lookups skip a dying superblock
anyway - s_root is gone before ->put_super runs and super_lock()
refuses SB_DYING superblocks.
The upcoming device-to-superblock table registers every superblock
under its s_dev. Drop the reset instead of leaving a superblock around
whose s_dev contradicts its registration.
Link: https://patch.msgid.link/20260616-work-super-bdev_holder_global-v2-6-7df6b864028e@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The mballoc and extents KUnit tests create superblocks through
sget_fc() with a set callback that never assigns s_dev and a kill_sb
that only calls generic_shutdown_super().
The upcoming global device-to-superblock table registers every
superblock under its s_dev, so each superblock needs a unique device
number. Allocate a proper anonymous device via set_anon_super_fc() and
release it through kill_anon_super().
Link: https://patch.msgid.link/20260616-work-super-bdev_holder_global-v2-5-7df6b864028e@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
__put_super() required the caller to hold sb_lock, so put_super()
wrapped it. The per-device superblock table introduced later drops its
passive references from contexts that do not hold sb_lock, so make
put_super() self-locking: drop the count first and take sb_lock only for
the final list_del.
With the count now dropped outside sb_lock a superblock can briefly sit
on @super_blocks with s_passive == 0 before it is unlinked, so the list
walkers (__iterate_supers(), iterate_supers_type(), user_get_super())
switch to refcount_inc_not_zero() and skip it.
Link: https://patch.msgid.link/20260616-work-super-bdev_holder_global-v2-3-7df6b864028e@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The superblock carries two counters: s_active, the active reference
count that keeps the filesystem usable, and s_count, the passive
reference count that merely keeps the structure itself alive. Turn the
passive count into a refcount_t and rename it to s_passive to make the
pairing with s_active obvious.
Everything is still serialized by sb_lock, so there is no functional
change; the conversion buys the usual refcount_t saturation and
underflow checking. The following patches start dropping passive
references without holding sb_lock and make the device-to-superblock
table hold one passive reference per registered entry, which a plain
integer cannot support.
Link: https://patch.msgid.link/20260616-work-super-bdev_holder_global-v2-2-7df6b864028e@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Christian Brauner <brauner@kernel.org> says:
block,btrfs: fix frozen-superblock strand on device add/remove/replace
This is another series of fixes that fell out of the device to
superblock hashtable work. These are all pre-existing bugs.
A block-device freeze that races a btrfs device membership change can leave
the whole filesystem stuck frozen, recoverable only with a manual FITHAW.
btrfs holds each of its devices open with the superblock as the block-device
holder. bdev_freeze() - issued by "dmsetup suspend" or an LVM snapshot -
resolves that holder to freeze the filesystem, and bdev_thaw() ("dmsetup
resume") resolves it again to thaw. If a freeze lands while btrfs is adding,
removing or replacing a device, it rides in on the device's holder link and
freezes the filesystem; the membership change then drops that link, so the
matching thaw can no longer find the superblock. The filesystem stays frozen
with no way back short of FITHAW.
To reproduce on the remove path: build a two-device btrfs with one member
behind a dm-linear target, write enough data that removing that member
relocates for a few seconds, start "btrfs device remove" on it, and
"dmsetup suspend" the dm device while the removal is underway. The suspend's
freeze blocks on the remove ioctl's write access and rides in as the ioctl
drops it; the removal then clears the device's holder link, so the matching
"dmsetup resume" can no longer reach the superblock. On an unpatched kernel
the filesystem is left frozen and the next write hangs in D state until a
manual FITHAW (fsfreeze -u).
The fix lets a filesystem forbid freezing a device for the duration of a
membership change, modelled on deny_write_access()/allow_write_access().
bd_fsfreeze_count becomes signed: > 0 counts active freezes, < 0 counts deny
holders, and the two are mutually exclusive. bdev_deny_freeze() reserves the
device (bdev_freeze() then returns -EBUSY) and bdev_allow_freeze() releases
it; both are a single lockless atomic, so a filesystem can deny under
s_umount without inverting against bdev_freeze()'s bd_fsfreeze_mutex. btrfs
denies the device across each add, remove and replace, so a racing freeze is
refused instead of riding in, while a normal freeze of a settled member
still works.
To re-allow freezing safely on release, bdev_yield_claim() is split out of
bdev_fput(): the caller yields the holder while the device file is still
open, re-allows freezing on the now-holderless device, and only then closes
it. Re-allowing after the holder is gone avoids re-stranding on a racing
freeze; doing it while the file is still open keeps the block device alive
without referencing it after the final fput.
With the fix the racing suspend is refused with -EBUSY mid-removal and the
filesystem stays writable.
* patches from https://patch.msgid.link/20260616-work-super-freeze_deny_upstream-v2-0-b3567c7f994b@kernel.org:
btrfs: deny freezing devices undergoing a replace
btrfs: deny freezing a device while it is being added
btrfs: deny freezing a device while it is being removed
block: split bdev_yield_claim() out of bdev_fput()
block: allow making a block device unfreezable
Link: https://patch.msgid.link/20260616-work-super-freeze_deny_upstream-v2-0-b3567c7f994b@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
A device replace opens a target and, on success, frees the source on a live
filesystem from btrfs_dev_replace_finishing() - which cannot fail and also
runs from a kthread on mount resume. A bdev_freeze() racing the source free
or the target swap-in would freeze the filesystem through a claim that is
being torn down or replaced, leaving nothing for bdev_thaw() to rebalance.
Make both devices unfreezable for the whole replace, with the invariant that
a STARTED replace holds one deny on each device and any other state holds
none. The target is denied at open (btrfs_open_device_deny_freeze(), undone
on btrfs_init_dev_replace_tgtdev()'s error unwind); the source is denied at
the start of btrfs_dev_replace_start(), before mark_block_group_to_copy() so
every 'leave' unwind sees both denied.
The deny tracks the STARTED state and is dropped whenever the replace leaves
it: btrfs_dev_replace_finishing() re-allows the target it makes a member and
frees the source through btrfs_close_bdev(allow_freeze=true), and its
scrub-error path re-allows both as it cancels. Its early failures (before
the device swap) keep the replace STARTED and resumable, so both stay denied.
Suspending for unmount re-allows both, so they are reopened freezable at the
next mount where btrfs_resume_dev_replace_async() re-denies them (staying
suspended if a device is frozen right then); a replace cancelled from the
suspended state therefore destroys the target without allowing.
btrfs_close_bdev() and btrfs_destroy_dev_replace_tgtdev() take an allow_freeze
argument to carry this distinction; the unmount path
(btrfs_close_one_device()) passes false.
On resume, a failed kthread_run() re-allows both devices and goes through the
suspend path, resetting the replace to SUSPENDED and finishing the exclusive
operation instead of returning straight away. The (re)mount still aborts on
that error; routing it through suspend keeps the deny balanced against the
unmount teardown and additionally drops BTRFS_EXCLOP_DEV_REPLACE, closing a
pre-existing leak that was harmless on the failed mount that frees the fs but
would have wedged future exclusive operations after a failed remount-rw.
Link: https://patch.msgid.link/20260616-work-super-freeze_deny_upstream-v2-5-b3567c7f994b@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
btrfs_init_new_device() opens and claims the new device on a live
superblock without holding the write count, so a bdev_freeze() racing the
window between the claim being published and the device becoming a member
could freeze the filesystem through a claim the add may still abort and tear
down.
Add btrfs_open_device_deny_freeze(): it opens the device once
non-exclusively to take the freeze deny, then claims it by the same dev_t,
so the holder is only ever published while the device is already
unfreezable. Keep it denied until the add is durable: bdev_allow_freeze()
on each success return (the device is now a committed member),
btrfs_release_device_allow_freeze() on the error unwind. The deny spans the
whole add, including the seeding tail whose late failures still release the
device. A device already frozen when the add starts is refused with -EBUSY.
Link: https://patch.msgid.link/20260616-work-super-freeze_deny_upstream-v2-4-b3567c7f994b@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
btrfs_rm_device() runs under mnt_want_write_file(), but the claim on the
removed device is released by the ioctl after mnt_drop_write_file(), so a
bdev_freeze() racing that window could freeze the filesystem through the
device just as its claim is torn down, leaving nothing for bdev_thaw() to
rebalance.
The window cannot be closed by reordering the teardown. btrfs_rm_device()
hands the final bdev_fput() back to the ioctl, run only after
mnt_drop_write_file(), because bdev_release() takes the disk ->open_mutex and
its dependency chain, which must not nest under the superblock's freeze/write
protection -- freeze_super() drops s_umount before draining writers precisely
to keep sb_start_write ordered above s_umount. Holding mnt_want_write across
bdev_fput() would reintroduce that inversion, so the holder teardown is forced
outside the write-protected section. A freeze landing in the resulting gap
resolves the still-live holder, rides in, and strands when the claim is
released; no ordering of the close against the drop removes the gap. The
device itself therefore has to refuse freezing for the whole removal.
Deny freezing the device for the duration of the removal: bdev_deny_freeze()
at the start of btrfs_rm_device() (it cannot be frozen yet, the ioctl holds
the write count), and release it through btrfs_release_device_allow_freeze()
in the ioctls on success, or bdev_allow_freeze() on the error paths that keep
the device a member. A device frozen before the removal begins is refused
with -EBUSY.
btrfs_release_device_allow_freeze() yields the holder, re-allows freezing,
then closes the device, so the re-allow neither strands the filesystem on a
racing freeze nor touches the block device after the final fput.
Link: https://patch.msgid.link/20260616-work-super-freeze_deny_upstream-v2-3-b3567c7f994b@kernel.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
bdev_fput() yields the holder claim and then closes the file, which is a
deferred operation. Split the yield half into bdev_yield_claim() so a caller
can give up the holder while the file - and therefore the block device - is
still open, act on the device, and only then bdev_fput().
A filesystem that made a device unfreezable for a membership change with
bdev_deny_freeze() undoes the deny on release with
bdev_yield_claim(bdev_file);
bdev_allow_freeze(file_bdev(bdev_file));
bdev_fput(bdev_file);
Re-allowing only after the holder is yielded avoids stranding the filesystem
on a racing freeze, and doing it while the file is still open avoids touching
the block device after bdev_fput(). bdev_fput() yields again, which is a
no-op once the claim has already been given up.
Link: https://patch.msgid.link/20260616-work-super-freeze_deny_upstream-v2-2-b3567c7f994b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewd-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Add bdev_deny_freeze() and bdev_allow_freeze(), modeled on
deny_write_access()/allow_write_access(). bd_fsfreeze_count becomes a
signed counter: > 0 counts active freezes, < 0 counts deniers, and the
two regimes are mutually exclusive. bdev_freeze() refuses with -EBUSY
while a deny is held, and bdev_deny_freeze() refuses while the device is
frozen.
A filesystem that mutates a device's membership (a btrfs device add,
remove or replace) denies freezing on the device for the duration, so a
claim a freeze walk might act on is never added or torn down behind the
freezer's back.
The deny/allow helpers are a single atomic on bd_fsfreeze_count and take
no lock, so they can be called while holding s_umount without inverting
against bdev_freeze()'s bd_fsfreeze_mutex -> s_umount order.
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260616-work-super-freeze_deny_upstream-v2-1-b3567c7f994b@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Pull NTB updates from Jon Mason:
"An EPF bug fix to prevent an invalid unmap during device removal,
along with documentation fixes and minor AMD driver cleanups"
* tag 'ntb-7.2' of https://github.com/jonmason/ntb:
ntb: amd: Use named initializer for pci_device_id::driver_data
NTB: fix kernel-doc warnings in ntb.h
NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR
ntb_hw_amd: Fix incorrect debug message in link disable path
Pull more input updates from Dmitry Torokhov:
- Updates to Synaptics RMI4 driver to fix potential OOB accesses in F30
and F3A keymap handling
- A workaround in Synaptics RMI4 to tolerate buggy firmware on some
touchpads (e.g. ThinkPad T14 Gen 1) that report incomplete register
descriptor structures, preventing probe failures
- A revert of an incorrect register descriptor address calculation in
Synaptics RMI4 driver
- A fix for a regression in HP GSC PS/2 (gscps2) driver where the
receive buffer write index was not advanced, leaving keyboard and
mouse unusable.
* tag 'input-for-v7.2-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: gscps2 - advance receive buffer write index
Input: rmi4 - tolerate short register descriptor structure
Revert "Input: rmi4 - fix register descriptor address calculation"
Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count
Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count
Pull pwm fixes from Uwe Kleine-König:
"Two more fixes that I managed to put into the public branch merged
into next before my first pull request but missed to include them in
it.
The first change is a relevant change that fixes misconfigurations due
to a variable overflow. The second is only cosmetic but very obviously
an improvement"
* tag 'pwm/for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: rzg2l-gpt: Add missing newlines to dev_err_probe() messages
pwm: rzg2l-gpt: Fix period_ticks type from u32 to u64
Pull more fbdev updates from Helge Deller:
"Fixes for generic fbdev & fbcon code for the handling of modelists
and preventing a potential NULL ptr dereference in the console code.
Fix missed cleanups in the error path of various fbdev drivers.
And Uwe Kleine-König contributed a cleanup patch to use named
initializers in the vga16fb driver"
* tag 'fbdev-for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var
fbcon: fix NULL pointer dereference for a console without vc_data
fbdev: fix use-after-free in store_modes()
fbdev: viafb: return an error when DMA copy times out
fbdev: goldfishfb: fail pan display on base-update timeout
fbdev: fbcon: fix out-of-bounds read in err_out of fbcon_do_set_font()
fbdev: pm2fb: unwind WC setup on probe failure
fbdev: vga16fb: Drop unused assignment of platform_device_id driver data
Pull sound fixes from Takashi Iwai:
"A collection of small bug fixes accumulated over the last week.
Most are device-specific fixes while there are a few core fixes as
well.
Here are the highlights:
ALSA Core:
- A fix for an uninitialised heap leak in ALSA sequencer core
- A fix for error handling/resource leak in compress-offload API
USB-audio:
- A teardown-ordering fix in USB MIDI 2.0 to prevent use-after-free
- Bounds and length checks for packet data in Native Instruments
caiaq / Traktor Kontrol input parsers
- Avoidance of expensive kobject path lookups in DualSense controller
matches
- Robustness/memory leak fixes for Qualcomm USB offload driver
- Focusrite Control Protocol (FCP) NULL-pointer dereference fix and a
new device quirk (ISA C8X)
- Device-specific quirks for Yamaha CDS3000 and SC13A
HD-Audio:
- A bunch of quirks and mute/mic-mute LED fixups for various laptops
(Acer, Clevo, Lenovo, HP)
ASoC & SoundWire:
- Avoid failing card registration if the device_link creation fails
- A workaround for SoundWire randconfig build failures by making
helper functions static inline
- Corrected MCLK reference validation for CS530x codecs
- Clean up of untested, problematic guard() macro replacements in
Rockchip SAI driver
- Fix for eDMA maxburst misalignment with channel count in Freescale
ASRC
- Miscellaneous hardware-specific fixes (qcom, rt5650, tlv320aic3x,
tas2781/3)
Others:
- Bounds and length checks for packet data in Apple iSight"
* tag 'sound-fix-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: FCP: Fix NULL pointer dereference in interface lookup
ALSA: hda/realtek: Update Acer Nitro ANV15-41 quirk to enable mute LED
ASoC: fsl_asrc_dma: fix eDMA maxburst misalignment with channel count
ASoC: codecs: pcm512x: only print info once on no sclk
ASoC: tas2781: Update default register address to TAS2563
ALSA: firewire: isight: bound the sample count to the packet payload
ALSA: usb-audio: qcom: Free QMI handle
ALSA: hda: Add Lenovo Legion 7i 16IAX7 17AA3874 quirk
ALSA: usb-audio: avoid kobject path lookup in DualSense match
ALSA: hda/realtek: Add quirk for Acer Nitro ANV15-41
ASoC: soc-core: Don't fail if device_link could not be created
ASoC: rockchip: rockchip_sai: #include <linux/platform_device.h> explicitly
ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup()
ASoC: rt5575: Use __le32 for SPI burst write address
ASoC: tas2783: Update loaded firmware names to linux-firmware 20260519
ASoC: SDCA: Validate written enum value in ge_put_enum_double()
ASoC: realtek: Add back local call to sdw_show_ping_status()
ASoC: ti: Add back local call to sdw_show_ping_status()
ASoC: max98373: Add back local call to sdw_show_ping_status()
ASoC: es9356: Add back local call to sdw_show_ping_status()
...
Pull RTC updates from Alexandre Belloni:
"Most of the work and improvements are for features of the m41t93.
The ds1307 also gets support for OSF (Oscillator Stop Flag) for
new variants.
The pcap driver is being removed as the Motorola EZX support was
removed a while ago.
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for
ds1307, fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes"
* tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (36 commits)
rtc: ds1307: update reference to removed CONFIG_RTC_DRV_DS1307_HWMON
platform/x86: amd-pmc: Fix S0i3 wakeup with alarmtimer
rtc: s35390a: fix typo in comment
rtc: cmos: unregister HPET IRQ handler on probe failure
rtc: ds1307: Fix off-by-one issue with wday for rx8130
dt-bindings: rtc: ds1307: Add epson,rx8901
rtc: bq32000: add delay between RTC reads
rtc: m41t93: Add watchdog support
rtc: m41t93: Add square wave clock provider support
rtc: m41t93: Add alarm support
rtc: m41t93: migrate to regmap api for register access
rtc: m41t93: add device tree support
dt-bindings: rtc: Add ST m41t93
rtc: ds1307: add support for clock provider in ds1307
rtc: mv: add suspend/resume support for wakeup
rtc: aspeed: add AST2700 compatible
dt-bindings: rtc: add ASPEED AST2700 compatible
rtc: interface: fix typos in rtc_handle_legacy_irq() documentation
rtc: msc313: fix NULL deref in shared IRQ handler at probe
rtc: remove unused pcap driver
...
Pull fscrypt fixes from Eric Biggers:
- Fix a bug where in a specific edge case, file contents en/decryption
could be done with the wrong data unit size
- Fix the data structure used for keeping track of users that have
added an fscrypt key to be a simple list instead of a 'struct key'
keyring
This fixes issues such as a lockdep report found by syzbot and
possible unintended interactions with the keyctl() system calls
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: Replace mk_users keyring with simple list
fscrypt: Fix key setup in edge case with multiple data unit sizes
Commit 44f9200699 ("Input: gscps2 - use guard notation when
acquiring spinlock") moved the receive loop into gscps2_read_data()
and gscps2_report_data().
While moving the code, it preserved the writes to
buffer[ps2port->append], but omitted the following producer index
update from the original loop:
ps2port->append = (ps2port->append + 1) & BUFFER_SIZE;
As a result, append never advances. Since gscps2_report_data() only
reports bytes while act != append, the receive buffer always appears
empty and no keyboard or mouse data reaches the serio core.
Restore the omitted index update.
Fixes: 44f9200699 ("Input: gscps2 - use guard notation when acquiring spinlock")
Cc: stable@vger.kernel.org # 6.13+
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/460B5655BA580C60+20260624094739.850306-1-raoxu@uniontech.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some touchpads (e.g. ThinkPad T14 Gen 1) have buggy firmware that reports
a register descriptor structure size that is too small for the number of
registers it claims to have in the presence map. The remaining bytes in
the structure are 0, which with the new strict bounds checking causes the
parser to fail with -EIO, aborting the device probe.
Tolerate such short reads by dropping the remaining (unparseable or
0-size) registers from the list instead of failing the probe,
preventing the driver from trying to use them.
Fixes: 0adb483fbf ("Input: rmi4 - refactor register descriptor parsing")
Reported-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The register descriptor presence register is a packet register, which
means its bytes share a single RMI address. It does not occupy
consecutive addresses, and the register structure that follows it
is located at the next RMI address (presence_address + 1), not
(presence_address + presence_size).
Revert the incorrect address calculation introduced in commit
a98518e724.
Reported-by: "Barry K. Nathan" <barryn@pobox.com>
Tested-by: "Barry K. Nathan" <barryn@pobox.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current list initialisation depends on the well hidden two zeros in
the PCI_VDEVICE macro. Instead use a named initialisation that is more
robust and easier to understand.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Correct a function name and function parameter name to avoid
kernel-doc warnings:
Warning: include/linux/ntb.h:575 expecting prototype for
ntb_default_port_count(). Prototype was for ntb_default_peer_port_count()
instead
Warning: include/linux/ntb.h:590 function parameter 'pidx' not
described in 'ntb_default_peer_port_number'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
When BAR_PEER_SPAD and BAR_CONFIG share one PCI BAR, the module teardown
path ends up calling pci_iounmap() on the same iomem with some offset,
which is unnecessary and triggers a kernel warning like the following:
Trying to vunmap() nonexistent vm area (0000000069a5ffe8)
WARNING: mm/vmalloc.c:3470 at vunmap+0x58/0x68, CPU#5: modprobe/2937
[...]
Call trace:
vunmap+0x58/0x68 (P)
iounmap+0x34/0x48
pci_iounmap+0x2c/0x40
ntb_epf_pci_remove+0x44/0x80 [ntb_hw_epf]
pci_device_remove+0x48/0xf8
device_remove+0x50/0x88
device_release_driver_internal+0x1c8/0x228
driver_detach+0x50/0xb0
bus_remove_driver+0x74/0x100
driver_unregister+0x34/0x68
pci_unregister_driver+0x34/0xa0
ntb_epf_pci_driver_exit+0x14/0xfe0 [ntb_hw_epf]
[...]
Fix it by unmapping only when PEER_SPAD and CONFIG use difference bars.
Cc: stable@vger.kernel.org
Fixes: e75d5ae8ab ("NTB: epf: Allow more flexibility in the memory BAR map method")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
amd_ntb_link_disable() prints "Enabling Link" which is misleading.
Update the message to reflect that the link is being disabled.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Pull drm fixes from Dave Airlie:
"These are just the fixes from our fixes branch, all pretty small and
scattered.
sysfb:
- drm/sysfb truncation and alignment fixes
edid:
- fix edid OOB read in tile parsing
- increase displayid topology id to correct size
nouveau:
- fix error handling paths in nouveau
amdxdna:
- get_bo_info fix
ivpu:
- fix leak when error handling in ivpu"
* tag 'drm-fixes-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel:
drm/sysfb: Avoid truncating maximum stride
drm/sysfb: Return errno code from drm_sysfb_get_visible_size()
drm/sysfb: Avoid possible truncation with calculating visible size
drm/sysfb: Do not page-align visible size of the framebuffer
drm/edid: fix OOB read in drm_parse_tiled_block()
drm/nouveau: fix reversed error cleanup order in ucopy functions
drm/nouveau/acr: fix missing nvkm_done() in error path of nvkm_acr_oneinit()
accel/amdxdna: Use caller client for debug BO sync
drm/displayid: fix Tiled Display Topology ID size
accel/ivpu: fix HWS command queue leak on registration failure
Pull drm merge window fixes from Dave Airlie:
"This is the merge window fixes from our next tree, i915/xe and amdgpu
make up all of it.
I've got a separate fixes pull from our fixes branch arriving after
this.
i915:
- Fix corrupted display output on GLK, #16209
- Add missing Spectre mitigation for parallel submit IOCTL
- MTL+ fix for DP resume
- clear CRTC blobs after dropping refs
- fix sharpness filter on DP MST
xe:
- Set TTM beneficial order to 9 in Xe
- Several error path cleanups
- Fix TDR for unstarted jobs on kernel queues
- Several TLB invalidation fixes related to suspending LR queues
- Some small RAS fixes
- Multi-queue suspend fix for LR queues
- Revert inclusion of NVL_S firmware
amdgpu:
- devcoredump fixes
- SMU15 fix
- Various irq put/get imbalance cleanup fixes
- 8K panel fix
- DCN3.5 fix
- lockdep fix
- Cleaner shader sysfs IB overflow fix
- Async flip fixes
- GET_MAPPING_INFO fix
- CP_GFX_SHADOW fix
- Ctx pstate handling fix
- GTT bo move handling fixes
- Old UVD BO placement fixes
- GC9 mode2 reset fix
- IH6.1 version fix
- Soft IH ring fix
amdkfd:
- Fix doorbell/mmio double unpin on free
- CRIU fixes
- SMI event fixes
- Sysfs teardown fix
- Various boundary checking fixes
- Various error checking fixes
- SVM fix"
* tag 'drm-next-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel: (52 commits)
drm/i915/cdclk: Fix up CDCLK_FREQ_DECIMAL without a full PLL re-enable
drm/i915/gem: Add missing nospec on parallel submit slot
drm/amdgpu: Use system unbound workqueue for soft IH ring
amdgpu/ih6.1: Fix minor version
drm/amdkfd: Use exclusive bounds for SVM split alignment checks
drm/amdgpu/gfx9: Fix Ring and IB test fail after mode2
drm/amdgpu/uvd: Fix forcing MSG, FB BOs into VCPU segment when it isn't at 0 (v2)
drm/amdgpu/uvd: Place VCPU BO only in VRAM for UVD 4.x and older
drm/amdgpu: Fix amdgpu_bo_move() when old_mem and new_mem are both GTT
drm/amdgpu: Respect placement requirements in amdgpu_gtt_mgr functions
drm/amdgpu: Fix context pstate override handling
drm/amdkfd: Use memdup_array_user to copy data from/to user space at kfd ioctls
drm/amdkfd: check find_first_zero_bit before __set_bit on kfd->doorbell_bitmap
drm/amdkfd: Let driver decide buffer size at AMDKFD_IOC_GET_DMABUF_INFO ioctl
drm/amdgpu: fix recursive ww_mutex acquire in amdgpu_devcoredump_format
drm/amdgpu: convert amdgpu_vm_lock_by_pasid() to drm_exec
drm/amdgpu: Don't use UTS_RELEASE directly
drm/amdkfd: Fix NULL deref during sysfs teardown
drm/amdgpu: validate CP_GFX_SHADOW chunk size in CS pass1
drm/amdgpu: check amdgpu_vm_bo_find() result in GET_MAPPING_INFO
...
Pull ceph updates from Ilya Dryomov:
"This adds support for manual client session reset in CephFS, allowing
operators to get out of tricky livelock situations involving caps and
file locks without evicting the problematic client instance on the MDS
side or rebooting the client node both of which can be disruptive"
* tag 'ceph-for-7.2-rc1' of https://github.com/ceph/ceph-client:
ceph: add manual reset debugfs control and tracepoints
ceph: add client reset state machine and session teardown
ceph: add diagnostic timeout loop to wait_caps_flush()
ceph: harden send_mds_reconnect and handle active-MDS peer reset
ceph: use proper endian conversion for flock_len in reconnect
ceph: convert inode flags to named bit positions and atomic bitops
rbd: switch to dynamic root device
Pull thermal control fixes from Rafael Wysocki:
"These fix a failure path in an Intel thermal driver and prevent
thermal testing module code from being executed after it has been
freed:
- Fix dangling resources on thermal_throttle_online() failure in the
Intel thermal_throttle driver (Ricardo Neri)
- Eliminate a possibility of running thermal testing module code
after that module has been removed (Rafael Wysocki)"
* tag 'thermal-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: testing: zone: Flush work items during cleanup
thermal: intel: Fix dangling resources on thermal_throttle_online() failure
Pull power management fixes from Rafael Wysocki:
"These fix the schedutil cpufreq governor and drop a bogus warning
from the cpuidle core:
- Remove a misguided warning along with an inaccurate comment
next to it from the cpuidle core (Rafael Wysocki)
- Clear need_freq_update as appropriate in the .adjust_perf()
path of the schedutil cpufreq governor to avoid calling
cpufreq_driver_adjust_perf() unnecessarily on every scheduler
utilization update (Zhongqiu Han)"
* tag 'pm-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: Allow exit latency to exceed target residency
cpufreq: schedutil: Fix uncleared need_freq_update on the .adjust_perf() path
Pull ACPI support fixes and cleanups from Rafael Wysocki:
"These fix assorted issues and do cleanups in the ACPI support code,
which includes a fix for tools build breakage related to strncpy()
removal:
- Unbreak ACPICA tools builds after switching over to using
strscpy_pad() that is kernel-specific (Rafael Wysocki)
- Fix module parameter file paths in comments in the ACPI code
managing the general sysfs attributes (Zenghui Yu)
- Update kerneldoc comments in the ACPI resource management code to
follow the common style (Andy Shevchenko)
- Fix inverted interface check in ipmi_bmc_gone() that may cause ACPI
IPMI interfaces to be mishandled (Xu Rao)
- Add __cpuidle annotation to idle state management functions related
to ACPI _LPI to avoid trace-induced RCU warnings (Li RongQing)"
* tag 'acpi-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor_idle: Mark LPI enter functions as __cpuidle
ACPICA: Unbreak tools build after switching over to strscpy_pad()
ACPI: IPMI: Fix inverted interface check in ipmi_bmc_gone()
ACPI: resource: Amend kernel-doc style
ACPI: sysfs: Fix path of module parameters in comments
Pull spi fixes from Mark Brown:
"A fairly unremarkable collection of fixes that came in over the
merge window, plus a new device ID for the DesignWare controller
in the StarFive JHB100 SoC.
There's a couple of core fixes included, one avoiding freeing an
empty resource in error handling cases and another which fixes a
NULL dereference which could be triggered by using an abnormal
device registration flow like driver_override"
* tag 'spi-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: imx: reconfigure for PIO when DMA cannot be started
spi: dw: Add support for snps,dwc-ssi-2.00a
spi: dt-bindings: snps,dw-apb-ssi: Add starfive,jhb100-spi
spi: rpc-if: Use correct device for hardware reinitialization on resume
spi: acpi: Free resource list at appropriate time
spi: dw: fix wrong BAUDR setting after resume
spi: uniphier: Fix completion initialization order before devm_request_irq()
spi: Add NULL check for spi_get_device_id() in spi_get_device_match_data()
Pull regulator fixes from Mark Brown:
"A couple of unremarkable driver specific fixes that came in during the
merge window"
* tag 'regulator-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: da9121: Use subvariant ids in the I2C table
regulator: pca9450: Correct default t_off_deb for PCA9451A/PCA9452
Pull regmap fix from Mark Brown:
"Ensure that we don't overwrite the error code when cleaning up a
failed cache initialisation, helping people debug issues if they
do arise"
* tag 'regmap-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regcache: Do not overwrite error code when finalizing cache after error
Merge a fix eliminating a possibility of running the thermal testing
module code after that module has been removed.
* thermal-testing:
thermal: testing: zone: Flush work items during cleanup
Merge a cpuidle core fix that removes a misguided warning along with an
inaccurate comment next to it.
* pm-cpuidle:
cpuidle: Allow exit latency to exceed target residency
Merge an update of comments regarding the ACPI sysfs code, a kernel-doc
style fixup update of ACPI resource management, and ACPI IPMI driver
fix, and an ACPI processor driver fix for 7.2-rc1:
- Fix module parameter file paths in comments in the ACPI code managing
the general sysfs attributes (Zenghui Yu)
- Update kerneldoc comments in the ACPI resource management code to
follow the common style (Andy Shevchenko)
- Fix inverted interface check in ipmi_bmc_gone() which may cause ACPI
IPMI interfaces to be mishandled (Xu Rao)
- Add __cpuidle to idle state management functions related to ACPI _LPI
to avoid trace-induced RCU warnings (Li RongQing)
* acpi-sysfs:
ACPI: sysfs: Fix path of module parameters in comments
* acpi-resource:
ACPI: resource: Amend kernel-doc style
* acpi-driver:
ACPI: IPMI: Fix inverted interface check in ipmi_bmc_gone()
* acpi-processor:
ACPI: processor_idle: Mark LPI enter functions as __cpuidle
Pull devicetree fixes from Rob Herring:
- Drop unnecessary type reference from khadas,mcu "fan-supply"
- Fix clocks in Renesas R-Mobile APE6 example
- Add missing Unisoc SC2730 PMIC regulators schema
- Fix Amlogic thermal example
- kernel-doc fix for of_map_id()
- Handle negative index in of_fwnode_get_reference_args()
* tag 'devicetree-fixes-for-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: mfd: khadas,mcu: Drop type reference from "fan-supply"
dt-bindings: clock: renesas: div6: Use ZT/ZTR trace clock in R-Mobile APE6 example
regulator: dt-bindings: Add Unisoc SC2730 PMIC
dt-bindings: thermal: amlogic: Correct 'reg' in the example
dt-bindings: thermal: amlogic: Fix missing header in the example
of: Fix RST inline emphasis warnings in of_map_id() kernel-doc
of: property: Fix of_fwnode_get_reference_args() with negative index
Pull LoongArch updates from Huacai Chen:
- Add THREAD_INFO_IN_TASK implementation
- Add build salt to the vDSO
- Add some BPF JIT inline helpers
- Update DTS for I2C clocks and clock-frequency
- Some bug fixes and other small changes
* tag 'loongarch-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Test jited inline of bpf_get_smp_processor_id() for LoongArch
selftests/bpf: Test jited inline of bpf_get_current_task() for LoongArch
selftests/bpf: Add __arch_loongarch to limit test cases for LoongArch
selftests/bpf: Add get_preempt_count() support for LoongArch
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K2000
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K1000
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K0500
LoongArch: BPF: Inline bpf_get_smp_processor_id() helper
LoongArch: BPF: Inline bpf_get_current_task/_btf() helpers
LoongArch: BPF: Fix off-by-one error in tail call
LoongArch: BPF: Fix outdated tail call comments
LoongArch: Add build salt to the vDSO
LoongArch: Fix nr passing in set_direct_map_valid_noflush()
LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect()
LoongArch: Move struct kimage forward declaration before use
LoongArch: Report dying CPU to RCU in stop_this_cpu()
LoongArch: Add PIO for early access before ACPI PCI root register
LoongArch: Add THREAD_INFO_IN_TASK implementation
Pull arm64 fixes from Will Deacon:
"Small crop of arm64 fixes for -rc1. We've got a build fix for a new
randconfig permutation, a fix for a long-standing truncation issue
with hardware watchpoints and a KVM initialisation fix for the newly
merged remapping of the kernel data and bss sections:
- Fix randconfig build failure due to missing include of asm/insn.h
- Reject unaligned hardware watchpoints which were silently being
truncated
- Fix crash in KVM initialisation by deferring the read-only
remapping of the kernel data and bss sections"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: Defer read-only remap of data/bss linear alias
arm64/hw_breakpoint: reject unaligned watchpoints that would truncate BAS
arm64: static_call: include asm/insns.h
Pull ecryptfs updates from Tyler Hicks:
"No functional changes, just code cleanups:
- replace kmalloc()/snprintf() with kasprintf()
- simplify code flow by removing an unnecessary variable"
* tag 'ecryptfs-7.2-rc1-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
ecryptfs: use kasprintf in ecryptfs_crypto_api_algify_cipher_name
ecryptfs: remove redundant variable found_auth_tok
Pull smb server updates from Steve French:
"This is mostly a correctness and compatibility update for ksmbd's
SMB2/3 lease, oplock, durable handle, compound request, CREATE,
rename, stream and share-mode handling.
A large part of the series fixes cases found by smbtorture where ksmbd
diverged from the SMB2/3 protocol requirements.
The main changes are:
- Rework SMB2 lease state handling so lease state is shared per
ClientGuid/LeaseKey across opens, with better validation of lease
create contexts, ACK handling, epochs, break-in-progress reporting,
v2 lease notification routing, and chained lease breaks
- Fix several oplock break corner cases, including ACK validation,
timeout downgrade behavior, level-II break handling on unlink,
share-conflict lease breaks, and read-control/stat-open behavior
- Fix durable handle behavior around delete-on-close, stale
reconnects, reconnect context parsing, oplock/lease break
invalidation, and durable v2 AppInstanceId replacement
- Fix compound request handling so related commands propagate failed
statuses correctly, preserve response framing across chained
errors, keep compound FIDs across READ/WRITE/FLUSH, and send
interim STATUS_PENDING where clients expect cancellable compound
I/O
- Tighten CREATE and stream semantics, including create attribute
validation, allocation size reporting, explicit create security
descriptors, unnamed DATA stream handling, stream directory
validation, and stream delete sharing against the base file
- Fix rename and metadata behavior, including parent directory
sharing checks, denying directory rename with open children, and
preserving SMB ChangeTime across rename for open handles
- Fix two important safety issues: a multichannel byte-range lock
list owner race that could lead to use-after-free, and an NTLMv2
session key update before authentication proof validation
- Fix a concurrent SMB2 NEGOTIATE preauth use-after-free, a UBSAN
warning in compression capability parsing, a false hung-task
warning in the durable handle scavenger, endian debug logging,
Smatch indentation warnings, and kernel-doc warnings
- Increase the default SMB3 transaction size from 1MB to 4MB to
better match modern read/write negotiation and improve sequential
I/O behavior"
* tag 'v7.2-rc-part2-smb3-server-fixes' of git://git.samba.org/ksmbd: (50 commits)
ksmbd: fix kernel-doc warnings in smb2_lease_break_noti()
ksmbd: fix inconsistent indenting warnings
ksmbd: validate NTLMv2 response before updating session key
ksmbd: increase SMB3_DEFAULT_TRANS_SIZE from 1MB to 4MB
ksmbd: fix UBSAN array-index-out-of-bounds in decode_compress_ctxt()
ksmbd: sleep interruptibly in the durable handle scavenger
ksmbd: start file id allocation at 1
ksmbd: treat read-control opens as stat opens only for leases
ksmbd: validate :: stream type against directory create
ksmbd: break conflicting-open leases only as far as needed
ksmbd: break handle caching for share conflicts
ksmbd: normalize ungrantable lease states
ksmbd: return oplock protocol error for level II ack
ksmbd: avoid level II oplock break notification on unlink
ksmbd: downgrade oplock after break timeout
ksmbd: apply create security descriptor first
ksmbd: return requested create allocation size
ksmbd: tighten create file attribute validation
ksmbd: reject empty-attribute synchronize-only create
ksmbd: honor stream delete sharing for base file
...
info->var, a framebuffer's current mode, is expected to have a matching
entry in info->modelist. var_to_display() relies on this and treats a
failed fb_match_mode() as "This should not happen". fb_set_var() keeps it
true by adding the mode to the list on every change, and
do_register_framebuffer() does the same at registration.
store_modes() replaces the modelist from userspace. fb_new_modelist()
validates the new modes but does not check that info->var still has a
match. It relies on fbcon_new_modelist() to re-point consoles, but that
only handles consoles mapped to the framebuffer. With fbcon unbound there
are none, so info->var is left describing a mode that is no longer in the
list.
A later console takeover runs var_to_display(), where fb_match_mode()
returns NULL and leaves fb_display[i].mode NULL. fbcon_switch() passes it
to display_to_var(), and fb_videomode_to_var() dereferences the NULL mode.
Keep the current mode in the list in fb_new_modelist(), the same way
fb_set_var() does.
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Ian Bridges <icb@fastmail.org>
Signed-off-by: Helge Deller <deller@gmx.de>
fbcon_new_modelist() runs when a framebuffer's modelist changes. For each
console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and
passes the vc_num to fbcon_set_disp(). This assumes a console with a mode
set has a vc_data, but it can be NULL. fbcon_set_disp() sets
fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the
mode set after the vc_data is freed. fbcon_new_modelist() then dereferences
the NULL vc_data.
Keep fb_display[i].mode set only while the console has a vc_data. Check
vc_data before setting the mode in fbcon_set_disp(), and clear the mode in
fbcon_deinit(). The existing mode check in fbcon_new_modelist() then skips
such consoles.
Reported-by: syzbot+42525d636f430fd5d983@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=42525d636f430fd5d983
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Ian Bridges <icb@fastmail.org>
Signed-off-by: Helge Deller <deller@gmx.de>
store_modes() replaces a framebuffer's modelist with modes from userspace.
On success it frees the old modelist with fb_destroy_modelist(). Two
fields still point into that freed list.
One pointer is fb_display[i].mode, the mode a console is using.
fbcon_new_modelist() moves these pointers to the new list. It only does so
for consoles still mapped to the framebuffer. An unmapped console is
skipped and keeps its stale pointer. Unbinding fbcon, for example, sets
con2fb_map[i] to -1 but leaves fb_display[i].mode set. An
FBIOPUT_VSCREENINFO ioctl with FB_ACTIVATE_INV_MODE later reaches
fbcon_mode_deleted(). That function reads the stale fb_display[i].mode
through fb_mode_is_equal(). The read is a use-after-free.
The other pointer is fb_info->mode, the current mode. It is set through
the mode sysfs attribute. store_modes() does not update fb_info->mode, so
it is left pointing into the freed list. show_mode(), the attribute's read
handler, dereferences the stale fb_info->mode through mode_string(). The
read is a use-after-free.
Clear both pointers before freeing the list. Commit a1f3058930 ("fbcon:
Set fb_display[i]->mode to NULL when the mode is released") added the
helper fbcon_delete_modelist(). It clears every fb_display[i].mode that
points into a given list. So far it is called only from the unregister
path. Call it from store_modes() too, and set fb_info->mode to NULL.
Reported-by: syzbot+81c7c6b52649fd07299d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=81c7c6b52649fd07299d
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/ajjoDhAi2y4ArSlz@dev/
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Ian Bridges <icb@fastmail.org>
Signed-off-by: Helge Deller <deller@gmx.de>
A malformed USB device can provide a vendor-specific interface without
any endpoint descriptors. fcp_find_fc_interface() currently selects the
first vendor-specific interface and reads endpoint 0 from it, without
checking whether the interface actually has any endpoints.
When bNumEndpoints is zero, no endpoint array is allocated for the parsed
alternate setting, so get_endpoint(..., 0) yields an invalid endpoint
descriptor pointer. Dereferencing it through usb_endpoint_num() then
triggers a NULL pointer dereference.
Skip vendor-specific interfaces that do not have any endpoints.
Fixes: 46757a3e7d ("ALSA: FCP: Add Focusrite Control Protocol driver")
Reported-by: Jiaming Zhang <r772577952@gmail.com>
Closes: https://lore.kernel.org/lkml/CANypQFb1EHj0xX8bA1WxSOSK-5xca6ZNKzOQcp12=s=puY7VFw@mail.gmail.com/
Signed-off-by: Jiaming Zhang <r772577952@gmail.com>
Link: https://patch.msgid.link/20260625134933.425785-1-r772577952@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
