Pull arm64 fixes from Will Deacon:
"Here is a (hopefully) final round of arm64 fixes for 6.12 that address
some user-visible floating point register corruption. Both of the
Marks have been working on this for a couple of weeks and we've ended
up in a position where SVE is solid but SME still has enough pending
issues that the most pragmatic solution for the release and stable
backports is to disable the feature. Yes, it's a shame, but the
hardware is rare as hen's teeth at the moment and we're better off
getting back to a known good state before fixing it all properly.
We're also improving the selftests for 6.13 to help avoid merging
broken code in the future.
Anyway, the good news is that we're removing a lot more code than
we're adding.
Summary:
- Fix handling of SVE traps from userspace on preemptible kernels
when converting the saved floating point state into SVE state.
- Remove broken support for the SMCCCv1.3 "SVE discard hint"
optimisation.
- Disable SME support, as the current support code suffers from
numerous issues around signal delivery, ptrace access and
context-switch which can lead to user-visible corruption of the
register state"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Kconfig: Make SME depend on BROKEN for now
arm64: smccc: Remove broken support for SMCCCv1.3 SVE discard hint
arm64/sve: Discard stale CPU state when handling SVE traps
Pull powerpc fix from Madhavan Srinivasan:
- Fix spurious interrupts in Book3S HV Nested KVM
Thanks to Gautam Menghani.
* tag 'powerpc-6.12-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Mask off LPCR_MER for a vCPU before running it to avoid spurious interrupts
Pull spi fix from Mark Brown:
"An update for the maintainers of the AMD driver following some job
changes there"
* tag 'spi-fix-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
MAINTAINERS: update AMD SPI maintainer
Pull regulator fixes from Mark Brown:
"A couple of small fixes for drivers, nothing particularly remarkable"
* tag 'regulator-fix-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rk808: Add apply_bit for BUCK3 on RK809
regulator: rtq2208: Fix uninitialized use of regulator_config
Pull networking fixes from Jakub Kicinski:
"Including fixes from can and netfilter.
Things are slowing down quite a bit, mostly driver fixes here. No
known ongoing investigations.
Current release - new code bugs:
- eth: ti: am65-cpsw:
- fix multi queue Rx on J7
- fix warning in am65_cpsw_nuss_remove_rx_chns()
Previous releases - regressions:
- mptcp: do not require admin perm to list endpoints, got missed in a
refactoring
- mptcp: use sock_kfree_s instead of kfree
Previous releases - always broken:
- sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access
- virtio_net: make RSS interact properly with queue number
- can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
- can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing
configuration when switching CAN modes
Misc:
- revert earlier hns3 fixes, they were ignoring IOMMU abstractions
and need to be reworked
- can: {cc770,sja1000}_isa: allow building on x86_64"
* tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error path
net/smc: do not leave a dangling sk pointer in __smc_create()
rxrpc: Fix missing locking causing hanging calls
net/smc: Fix lookup of netdev by using ib_device_get_netdev()
net: arc: rockchip: fix emac mdio node support
net: arc: fix the device for dma_map_single/dma_unmap_single
virtio_net: Update rss when set queue
virtio_net: Sync rss config to device when virtnet_probe
virtio_net: Add hash_key_length check
virtio_net: Support dynamic rss indirection table size
netfilter: nf_tables: wait for rcu grace period on net_device removal
net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case
net: vertexcom: mse102x: Fix possible double free of TX skb
mptcp: use sock_kfree_s instead of kfree
mptcp: no admin perm to list endpoints
net: phy: ti: add PHY_RST_AFTER_CLK_EN flag
net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns()
net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7
net: hns3: fix kernel crash when uninstalling driver
Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'"
...
The ionic_setup_one() creates a debugfs entry for ionic upon
successful execution. However, the ionic_probe() does not
release the dentry before returning, resulting in a memory
leak.
To fix this bug, we add the ionic_debugfs_del_dev() to release
the resources in a timely manner before returning.
Fixes: 0de38d9f1d ("ionic: extract common bits from ionic_probe")
Signed-off-by: Wentao Liang <Wentao_liang_g@163.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20241107021756.1677-1-liangwentao@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a call gets aborted (e.g. because kafs saw a signal) between it being
queued for connection and the I/O thread picking up the call, the abort
will be prioritised over the connection and it will be removed from
local->new_client_calls by rxrpc_disconnect_client_call() without a lock
being held. This may cause other calls on the list to disappear if a race
occurs.
Fix this by taking the client_call_lock when removing a call from whatever
list its ->wait_link happens to be on.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Fixes: 9d35d880e0 ("rxrpc: Move client call connection to the I/O thread")
Link: https://patch.msgid.link/726660.1730898202@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull pwm fix from Uwe Kleine-König:
"Fix period setting in imx-tpm driver and a maintainer update
Erik Schumacher found and fixed a problem in the calculation of the
PWM period setting yielding too long periods. Trevor Gamblin - who
already cared about mainlining the pwm-axi-pwmgen driver - stepped
forward as an additional reviewer.
Thanks to Erik and Trevor"
* tag 'pwm/for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
MAINTAINERS: add self as reviewer for AXI PWM GENERATOR
pwm: imx-tpm: Use correct MODULO value for EPWM mode
seq_printf is costy, on a system with n CPUs, reading /proc/softirqs
would yield 10*n decimal values, and the extra cost parsing format string
grows linearly with number of cpus. Replace seq_printf with
seq_put_decimal_ull_width have significant performance improvement.
On an 8CPUs system, reading /proc/softirqs show ~40% performance
gain with this patch.
Signed-off-by: David Wang <00107082@163.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pablo Neira Ayuso says:
====================
Netfilter fix for net
The following series contains a Netfilter fix:
1) Wait for rcu grace period after netdevice removal is reported via event.
* tag 'nf-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: wait for rcu grace period on net_device removal
====================
Link: https://patch.msgid.link/20241107113212.116634-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andy Yan says:
====================
Fix the arc emac driver
The arc emac driver was broken for a long time,
The first broken happens when a dma releated fix introduced in Linux 5.10.
The second broken happens when a emac device tree node restyle introduced
in Linux 6.1.
These two patches are try to make the arc emac work again.
Changes in v2:
- Add cover letter.
- Add fix tag.
- Add more detail explaination.
====================
Link: https://patch.msgid.link/20241104130147.440125-1-andyshrk@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The binding emac_rockchip.txt is converted to YAML.
Changed against the original binding is an added MDIO subnode.
This make the driver failed to find the PHY, and given the 'mdio
has invalid PHY address' it is probably looking in the wrong node.
Fix emac_mdio.c so that it can handle both old and new
device trees.
Fixes: 1dabb74971 ("ARM: dts: rockchip: restyle emac nodes")
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Tested-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20220603163539.537-3-jbx6244@gmail.com
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ndev->dev and pdev->dev aren't the same device, use ndev->dev.parent
which has dma_mask, ndev->dev.parent is just pdev->dev.
Or it would cause the following issue:
[ 39.933526] ------------[ cut here ]------------
[ 39.938414] WARNING: CPU: 1 PID: 501 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x90/0x1f8
Fixes: f959dcd6dd ("dma-direct: Fix potential NULL pointer dereference")
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Philo Lu says:
====================
virtio_net: Make RSS interact properly with queue number
With this patch set, RSS updates with queue_pairs changing:
- When virtnet_probe, init default rss and commit
- When queue_pairs changes _without_ user rss configuration, update rss
with the new queue number
- When queue_pairs changes _with_ user rss configuration, keep rss as user
configured
Patch 1 and 2 fix possible out of bound errors for indir_table and key.
Patch 3 and 4 add RSS update in probe() and set_queues().
====================
Link: https://patch.msgid.link/20241104085706.13872-1-lulie@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
RSS configuration should be updated with queue number. In particular, it
should be updated when (1) rss enabled and (2) default rss configuration
is used without user modification.
During rss command processing, device updates queue_pairs using
rss.max_tx_vq. That is, the device updates queue_pairs together with
rss, so we can skip the sperate queue_pairs update
(VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET below) and return directly.
Also remove the `vi->has_rss ?` check when setting vi->rss.max_tx_vq,
because this is not used in the other hash_report case.
Fixes: c7114b1249 ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During virtnet_probe, default rss configuration is initialized, but was
not committed to the device. This patch fix this by sending rss command
after device ready in virtnet_probe. Otherwise, the actual rss
configuration used by device can be different with that read by user
from driver, which may confuse the user.
If the command committing fails, driver rss will be disabled.
Fixes: c7114b1249 ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Joe Damato <jdamato@fastly.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When reading/writing virtio_net_ctrl_rss, we get the indirection table
size from vi->rss_indir_table_size, which is initialized in
virtnet_probe(). However, the actual size of indirection_table was set
as VIRTIO_NET_RSS_MAX_TABLE_LEN=128. This collision may cause issues if
the vi->rss_indir_table_size exceeds 128.
This patch instead uses dynamic indirection table, allocated with
vi->rss after vi->rss_indir_table_size initialized. And free it in
virtnet_remove().
In virtnet_commit_rss_command(), sgs for rss is initialized differently
with hash_report. So indirection_table is not used if !vi->has_rss, and
then we don't need to alloc indirection_table for hash_report only uses.
Fixes: c7114b1249 ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Joe Damato <jdamato@fastly.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
8c873e2199 ("netfilter: core: free hooks with call_rcu") removed
synchronize_net() call when unregistering basechain hook, however,
net_device removal event handler for the NFPROTO_NETDEV was not updated
to wait for RCU grace period.
Note that 835b803377 ("netfilter: nf_tables_netdev: unregister hooks
on net_device removal") does not remove basechain rules on device
removal, I was hinted to remove rules on net_device removal later, see
5ebe0b0eec ("netfilter: nf_tables: destroy basechain and rules on
netdevice removal").
Although NETDEV_UNREGISTER event is guaranteed to be handled after
synchronize_net() call, this path needs to wait for rcu grace period via
rcu callback to release basechain hooks if netns is alive because an
ongoing netlink dump could be in progress (sockets hold a reference on
the netns).
Note that nf_tables_pre_exit_net() unregisters and releases basechain
hooks but it is possible to see NETDEV_UNREGISTER at a later stage in
the netns exit path, eg. veth peer device in another netns:
cleanup_net()
default_device_exit_batch()
unregister_netdevice_many_notify()
notifier_call_chain()
nf_tables_netdev_event()
__nft_release_basechain()
In this particular case, same rule of thumb applies: if netns is alive,
then wait for rcu grace period because netlink dump in the other netns
could be in progress. Otherwise, if the other netns is going away then
no netlink dump can be in progress and basechain hooks can be released
inmediately.
While at it, turn WARN_ON() into WARN_ON_ONCE() for the basechain
validation, which should not ever happen.
Fixes: 835b803377 ("netfilter: nf_tables_netdev: unregister hooks on net_device removal")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Although support for SME was merged in v5.19, we've since uncovered a
number of issues with the implementation, including issues which might
corrupt the FPSIMD/SVE/SME state of arbitrary tasks. While there are
patches to address some of these issues, ongoing review has highlighted
additional functional problems, and more time is necessary to analyse
and fix these.
For now, mark SME as BROKEN in the hope that we can fix things properly
in the near future. As SME is an OPTIONAL part of ARMv9.2+, and there is
very little extant hardware, this should not adversely affect the vast
majority of users.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org # 5.19
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20241106164220.2789279-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
SMCCCv1.3 added a hint bit which callers can set in an SMCCC function ID
(AKA "FID") to indicate that it is acceptable for the SMCCC
implementation to discard SVE and/or SME state over a specific SMCCC
call. The kernel support for using this hint is broken and SMCCC calls
may clobber the SVE and/or SME state of arbitrary tasks, though FPSIMD
state is unaffected.
The kernel support is intended to use the hint when there is no SVE or
SME state to save, and to do this it checks whether TIF_FOREIGN_FPSTATE
is set or TIF_SVE is clear in assembly code:
| ldr <flags>, [<current_task>, #TSK_TI_FLAGS]
| tbnz <flags>, #TIF_FOREIGN_FPSTATE, 1f // Any live FP state?
| tbnz <flags>, #TIF_SVE, 2f // Does that state include SVE?
|
| 1: orr <fid>, <fid>, ARM_SMCCC_1_3_SVE_HINT
| 2:
| << SMCCC call using FID >>
This is not safe as-is:
(1) SMCCC calls can be made in a preemptible context and preemption can
result in TIF_FOREIGN_FPSTATE being set or cleared at arbitrary
points in time. Thus checking for TIF_FOREIGN_FPSTATE provides no
guarantee.
(2) TIF_FOREIGN_FPSTATE only indicates that the live FP/SVE/SME state in
the CPU does not belong to the current task, and does not indicate
that clobbering this state is acceptable.
When the live CPU state is clobbered it is necessary to update
fpsimd_last_state.st to ensure that a subsequent context switch will
reload FP/SVE/SME state from memory rather than consuming the
clobbered state. This and the SMCCC call itself must happen in a
critical section with preemption disabled to avoid races.
(3) Live SVE/SME state can exist with TIF_SVE clear (e.g. with only
TIF_SME set), and checking TIF_SVE alone is insufficient.
Remove the broken support for the SMCCCv1.3 SVE saving hint. This is
effectively a revert of commits:
* cfa7ff959a ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
* a7c3acca53 ("arm64: smccc: Save lr before calling __arm_smccc_sve_check()")
... leaving behind the ARM_SMCCC_VERSION_1_3 and ARM_SMCCC_1_3_SVE_HINT
definitions, since these are simply definitions from the SMCCC
specification, and the latter is used in KVM via ARM_SMCCC_CALL_HINTS.
If we want to bring this back in future, we'll probably want to handle
this logic in C where we can use all the usual FPSIMD/SVE/SME helper
functions, and that'll likely require some rework of the SMCCC code
and/or its callers.
Fixes: cfa7ff959a ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241106160448.2712997-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Commit a23aa04042 ("net: stmmac: ethtool: Fixed calltrace caused by
unbalanced disable_irq_wake calls") introduced checks to prevent
unbalanced enable and disable IRQ wake calls. However it only
initialized the auxiliary variable on one of the paths,
stmmac_request_irq_multi_msi(), missing the other,
stmmac_request_irq_single().
Add the same initialization on stmmac_request_irq_single() to prevent
"Unbalanced IRQ <x> wake disable" warnings from being printed the first
time disable_irq_wake() is called on platforms that run on that code
path.
Fixes: a23aa04042 ("net: stmmac: ethtool: Fixed calltrace caused by unbalanced disable_irq_wake calls")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241101-stmmac-unbalanced-wake-single-fix-v1-1-5952524c97f0@collabora.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull NFS client fixes from Anna Schumaker:
"These are mostly fixes that came up during the nfs bakeathon the other
week.
Stable Fixes:
- Fix KMSAN warning in decode_getfattr_attrs()
Other Bugfixes:
- Handle -ENOTCONN in xs_tcp_setup_socked()
- NFSv3: only use NFS timeout for MOUNT when protocols are compatible
- Fix attribute delegation behavior on exclusive create and a/mtime
changes
- Fix localio to cope with racing nfs_local_probe()
- Avoid i_lock contention in fs_clear_invalid_mapping()"
* tag 'nfs-for-6.12-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs: avoid i_lock contention in nfs_clear_invalid_mapping
nfs_common: fix localio to cope with racing nfs_local_probe()
NFS: Further fixes to attribute delegation a/mtime changes
NFS: Fix attribute delegation behaviour on exclusive create
nfs: Fix KMSAN warning in decode_getfattr_attrs()
NFSv3: only use NFS timeout for MOUNT when protocols are compatible
sunrpc: handle -ENOTCONN in xs_tcp_setup_socket()
Pull keys fixes from Jarkko Sakkinen:
"A couple of fixes for keys and trusted keys"
* tag 'keys-next-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: dcp: fix NULL dereference in AEAD crypto operation
security/keys: fix slab-out-of-bounds in key_task_permission
Pull tracefs fixes from Steven Rostedt:
"Fix tracefs mount options.
Commit 78ff640819 ("vfs: Convert tracefs to use the new mount API")
broke the gid setting when set by fstab or other mount utility. It is
ignored when it is set. Fix the code so that it recognises the option
again and will honor the settings on mount at boot up.
Update the internal documentation and create a selftest to make sure
it doesn't break again in the future"
* tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/selftests: Add tracefs mount options test
tracing: Document tracefs gid mount option
tracing: Fix tracefs mount options
Pull x86 platform driver fixes from Hans de Goede:
- AMD PMF: Add new hardware id
- AMD PMC: Fix crash when loaded with enable_stb=1 on devices without STB
- Dell: Add Alienware hwid for Alienware systems with Dell WMI interface
- thinkpad_acpi: Quirk to fix wrong fan speed readings on L480
- New hotkey mappings for Dell and Lenovo laptops
* tag 'platform-drivers-x86-v6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix for ThinkPad's with ECFW showing incorrect fan speed
platform/x86: ideapad-laptop: add missing Ideapad Pro 5 fn keys
platform/x86: dell-wmi-base: Handle META key Lock/Unlock events
platform/x86: dell-smbios-base: Extends support to Alienware products
platform/x86/amd/pmc: Detect when STB is not available
platform/x86/amd/pmf: Add SMU metrics table support for 1Ah family 60h model
Pull device mapper fixes from Mikulas Patocka:
- fix memory safety bugs in dm-cache
- fix restart/panic logic in dm-verity
- fix 32-bit unsigned integer overflow in dm-unstriped
- fix a device mapper crash if blk_alloc_disk fails
* tag 'for-6.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: fix potential out-of-bounds access on the first resume
dm cache: optimize dirty bit checking with find_next_bit when resizing
dm cache: fix out-of-bounds access to the dirty bitset when resizing
dm cache: fix flushing uninitialized delayed_work on cache_ctr error
dm cache: correct the number of origin blocks to match the target length
dm-verity: don't crash if panic_on_corruption is not selected
dm-unstriped: cast an operand to sector_t to prevent potential uint32_t overflow
dm: fix a crash if blk_alloc_disk fails
The logic for handling SVE traps manipulates saved FPSIMD/SVE state
incorrectly, and a race with preemption can result in a task having
TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state
is stale (e.g. with SVE traps enabled). This has been observed to result
in warnings from do_sve_acc() where SVE traps are not expected while
TIF_SVE is set:
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
Warnings of this form have been reported intermittently, e.g.
https://lore.kernel.org/linux-arm-kernel/CA+G9fYtEGe_DhY2Ms7+L7NKsLYUomGsgqpdBj+QwDLeSg=JhGg@mail.gmail.com/https://lore.kernel.org/linux-arm-kernel/000000000000511e9a060ce5a45c@google.com/
The race can occur when the SVE trap handler is preempted before and
after manipulating the saved FPSIMD/SVE state, starting and ending on
the same CPU, e.g.
| void do_sve_acc(unsigned long esr, struct pt_regs *regs)
| {
| // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled
| // task->fpsimd_cpu is 0.
| // per_cpu_ptr(&fpsimd_last_state, 0) is task.
|
| ...
|
| // Preempted; migrated from CPU 0 to CPU 1.
| // TIF_FOREIGN_FPSTATE is set.
|
| get_cpu_fpsimd_context();
|
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
|
| sve_init_regs() {
| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
| ...
| } else {
| fpsimd_to_sve(current);
| current->thread.fp_type = FP_STATE_SVE;
| }
| }
|
| put_cpu_fpsimd_context();
|
| // Preempted; migrated from CPU 1 to CPU 0.
| // task->fpsimd_cpu is still 0
| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:
| // - Stale HW state is reused (with SVE traps enabled)
| // - TIF_FOREIGN_FPSTATE is cleared
| // - A return to userspace skips HW state restore
| }
Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set
by calling fpsimd_flush_task_state() to detach from the saved CPU
state. This ensures that a subsequent context switch will not reuse the
stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the
new state to be reloaded from memory prior to a return to userspace.
Fixes: cccb78ce89 ("arm64/sve: Rework SVE access trap to convert state in registers")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241030-arm64-fpsimd-foreign-flush-v1-1-bd7bd66905a2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Running a L2 vCPU (see [1] for terminology) with LPCR_MER bit set and no
pending interrupts results in that L2 vCPU getting an infinite flood of
spurious interrupts. The 'if check' in kvmhv_run_single_vcpu() sets the
LPCR_MER bit if there are pending interrupts.
The spurious flood problem can be observed in 2 cases:
1. Crashing the guest while interrupt heavy workload is running
a. Start a L2 guest and run an interrupt heavy workload (eg: ipistorm)
b. While the workload is running, crash the guest (make sure kdump
is configured)
c. Any one of the vCPUs of the guest will start getting an infinite
flood of spurious interrupts.
2. Running LTP stress tests in multiple guests at the same time
a. Start 4 L2 guests.
b. Start running LTP stress tests on all 4 guests at same time.
c. In some time, any one/more of the vCPUs of any of the guests will
start getting an infinite flood of spurious interrupts.
The root cause of both the above issues is the same:
1. A NMI is sent to a running vCPU that has LPCR_MER bit set.
2. In the NMI path, all registers are refreshed, i.e, H_GUEST_GET_STATE
is called for all the registers.
3. When H_GUEST_GET_STATE is called for LPCR, the vcpu->arch.vcore->lpcr
of that vCPU at L1 level gets updated with LPCR_MER set to 1, and this
new value is always used whenever that vCPU runs, regardless of whether
there was a pending interrupt.
4. Since LPCR_MER is set, the vCPU in L2 always jumps to the external
interrupt handler, and this cycle never ends.
Fix the spurious flood by masking off the LPCR_MER bit before running a
L2 vCPU to ensure that it is not set if there are no pending interrupts.
[1] Terminology:
1. L0 : PAPR hypervisor running in HV mode
2. L1 : Linux guest (logical partition) running on top of L0
3. L2 : KVM guest running on top of L1
Fixes: ec0f6639fa ("KVM: PPC: Book3S HV nestedv2: Ensure LPCR_MER bit is passed to the L0")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-11-04 (ice, idpf, i40e, e1000e)
For ice:
Marcin adjusts ordering of calls in ice_eswitch_detach() to resolve a
use after free issue.
Mateusz corrects variable type for Flow Director queue to fix issues
related to drop actions.
For idpf:
Pavan resolves issues related to reset on idpf; avoiding use of freed
vport and correctly unrolling the mailbox task.
For i40e:
Aleksandr fixes a race condition involving addition and deletion of VF
MAC filters.
For e1000e:
Vitaly reverts workaround for Meteor Lake causing regressions in power
management flows.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: Remove Meteor Lake SMBUS workarounds
i40e: fix race condition by adding filter's intermediate sync state
idpf: fix idpf_vc_core_init error path
idpf: avoid vport access in idpf_get_link_ksettings
ice: change q_index variable type to s16 to store -1 value
ice: Fix use after free during unload with ports in bridge
====================
Link: https://patch.msgid.link/20241104223639.2801097-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: pm: fix wrong perm and sock kfree
Two small fixes related to the MPTCP path-manager:
- Patch 1: remove an accidental restriction to admin users to list MPTCP
endpoints. A regression from v6.7.
- Patch 2: correctly use sock_kfree_s() instead of kfree() in the
userspace PM. A fix for another fix introduced in v6.4 and
backportable up to v5.19.
====================
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-0-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During the switch to YNL, the command to list all endpoints has been
accidentally restricted to users with admin permissions.
It looks like there are no reasons to have this restriction which makes
it harder for a user to quickly check if the endpoint list has been
correctly populated by an automated tool. Best to go back to the
previous behaviour then.
mptcp_pm_gen.c has been modified using ynl-gen-c.py:
$ ./tools/net/ynl/ynl-gen-c.py --mode kernel \
--spec Documentation/netlink/specs/mptcp_pm.yaml --source \
-o net/mptcp/mptcp_pm_gen.c
The header file doesn't need to be regenerated.
Fixes: 1d0507f468 ("net: mptcp: convert netlink from small_ops to ops")
Cc: stable@vger.kernel.org
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-1-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DP83848 datasheet (section 4.7.2) indicates that the reset pin should be
toggled after the clocks are running. Add the PHY_RST_AFTER_CLK_EN to
make sure that this indication is respected.
In my experience not having this flag enabled would lead to, on some
boots, the wrong MII mode being selected if the PHY was initialized on
the bootloader and was receiving data during Linux boot.
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 34e45ad937 ("net: phy: dp83848: Add TI DP83848 Ethernet PHY")
Link: https://patch.msgid.link/20241102151504.811306-1-paissilva@ld-100007.ds1.internal
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Roger Quadros says:
====================
net: ethernet: ti: am65-cpsw: Fixes to multi queue RX feature
On J7 platforms, setting up multiple RX flows was failing
as the RX free descriptor ring 0 is shared among all flows
and we did not allocate enough elements in the RX free descriptor
ring 0 to accommodate for all RX flows. Patch 1 fixes this.
The second patch fixes a warning if there was any error in
am65_cpsw_nuss_init_rx_chns() and am65_cpsw_nuss_cleanup_rx_chns()
was called after that.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
====================
Link: https://patch.msgid.link/20241101-am65-cpsw-multi-rx-j7-fix-v3-0-338fdd6a55da@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
flow->irq is initialized to 0 which is a valid IRQ. Set it to -EINVAL
in error path of am65_cpsw_nuss_init_rx_chns() so we do not try
to free an unallocated IRQ in am65_cpsw_nuss_remove_rx_chns().
If user tried to change number of RX queues and am65_cpsw_nuss_init_rx_chns()
failed due to any reason, the warning will happen if user tries to change
the number of RX queues after the error condition.
root@am62xx-evm:~# ethtool -L eth0 rx 3
[ 40.385293] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19
[ 40.393211] am65-cpsw-nuss 8000000.ethernet: Failed to init rx flow2
netlink error: Invalid argument
root@am62xx-evm:~# ethtool -L eth0 rx 2
[ 82.306427] ------------[ cut here ]------------
[ 82.311075] WARNING: CPU: 0 PID: 378 at kernel/irq/devres.c:144 devm_free_irq+0x84/0x90
[ 82.469770] Call trace:
[ 82.472208] devm_free_irq+0x84/0x90
[ 82.475777] am65_cpsw_nuss_remove_rx_chns+0x6c/0xac [ti_am65_cpsw_nuss]
[ 82.482487] am65_cpsw_nuss_update_tx_rx_chns+0x2c/0x9c [ti_am65_cpsw_nuss]
[ 82.489442] am65_cpsw_set_channels+0x30/0x4c [ti_am65_cpsw_nuss]
[ 82.495531] ethnl_set_channels+0x224/0x2dc
[ 82.499713] ethnl_default_set_doit+0xb8/0x1b8
[ 82.504149] genl_family_rcv_msg_doit+0xc0/0x124
[ 82.508757] genl_rcv_msg+0x1f0/0x284
[ 82.512409] netlink_rcv_skb+0x58/0x130
[ 82.516239] genl_rcv+0x38/0x50
[ 82.519374] netlink_unicast+0x1d0/0x2b0
[ 82.523289] netlink_sendmsg+0x180/0x3c4
[ 82.527205] __sys_sendto+0xe4/0x158
[ 82.530779] __arm64_sys_sendto+0x28/0x38
[ 82.534782] invoke_syscall+0x44/0x100
[ 82.538526] el0_svc_common.constprop.0+0xc0/0xe0
[ 82.543221] do_el0_svc+0x1c/0x28
[ 82.546528] el0_svc+0x28/0x98
[ 82.549578] el0t_64_sync_handler+0xc0/0xc4
[ 82.553752] el0t_64_sync+0x190/0x194
[ 82.557407] ---[ end trace 0000000000000000 ]---
Fixes: da70d184a8 ("net: ethernet: ti: am65-cpsw: Introduce multi queue Rx")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On J7 platforms, setting up multiple RX flows was failing
as the RX free descriptor ring 0 is shared among all flows
and we did not allocate enough elements in the RX free descriptor
ring 0 to accommodate for all RX flows.
This issue is not present on AM62 as separate pair of
rings are used for free and completion rings for each flow.
Fix this by allocating enough elements for RX free descriptor
ring 0.
However, we can no longer rely on desc_idx (descriptor based
offsets) to identify the pages in the respective flows as
free descriptor ring includes elements for all flows.
To solve this, introduce a new swdata data structure to store
flow_id and page. This can be used to identify which flow (page_pool)
and page the descriptor belonged to when popped out of the
RX rings.
Fixes: da70d184a8 ("net: ethernet: ti: am65-cpsw: Introduce multi queue Rx")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the driver is uninstalled and the VF is disabled concurrently, a
kernel crash occurs. The reason is that the two actions call function
pci_disable_sriov(). The num_VFs is checked to determine whether to
release the corresponding resources. During the second calling, num_VFs
is not 0 and the resource release function is called. However, the
corresponding resource has been released during the first invoking.
Therefore, the problem occurs:
[15277.839633][T50670] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
[15278.131557][T50670] Call trace:
[15278.134686][T50670] klist_put+0x28/0x12c
[15278.138682][T50670] klist_del+0x14/0x20
[15278.142592][T50670] device_del+0xbc/0x3c0
[15278.146676][T50670] pci_remove_bus_device+0x84/0x120
[15278.151714][T50670] pci_stop_and_remove_bus_device+0x6c/0x80
[15278.157447][T50670] pci_iov_remove_virtfn+0xb4/0x12c
[15278.162485][T50670] sriov_disable+0x50/0x11c
[15278.166829][T50670] pci_disable_sriov+0x24/0x30
[15278.171433][T50670] hnae3_unregister_ae_algo_prepare+0x60/0x90 [hnae3]
[15278.178039][T50670] hclge_exit+0x28/0xd0 [hclge]
[15278.182730][T50670] __se_sys_delete_module.isra.0+0x164/0x230
[15278.188550][T50670] __arm64_sys_delete_module+0x1c/0x30
[15278.193848][T50670] invoke_syscall+0x50/0x11c
[15278.198278][T50670] el0_svc_common.constprop.0+0x158/0x164
[15278.203837][T50670] do_el0_svc+0x34/0xcc
[15278.207834][T50670] el0_svc+0x20/0x30
For details, see the following figure.
rmmod hclge disable VFs
----------------------------------------------------
hclge_exit() sriov_numvfs_store()
... device_lock()
pci_disable_sriov() hns3_pci_sriov_configure()
pci_disable_sriov()
sriov_disable()
sriov_disable() if !num_VFs :
if !num_VFs : return;
return; sriov_del_vfs()
sriov_del_vfs() ...
... klist_put()
klist_put() ...
... num_VFs = 0;
num_VFs = 0; device_unlock();
In this patch, when driver is removing, we get the device_lock()
to protect num_VFs, just like sriov_numvfs_store().
Fixes: 0dd8a25f35 ("net: hns3: disable sriov before unload hclge layer")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241101091507.3644584-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit d80a309130, reversing
changes made to 637f414763:
2cf2461435 ("net: hns3: fix kernel crash when 1588 is sent on HIP08 devices")
3e22b7de34 ("net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue")
d1c2e2961a ("net: hns3: initialize reset_timer before hclgevf_misc_irq_init()")
5f62009ff1 ("net: hns3: don't auto enable misc vector")
2758f18a83 ("net: hns3: Resolved the issue that the debugfs query result is inconsistent.")
662ecfc466 ("net: hns3: fix missing features due to dev->features configuration too early")
3e0f7cc887 ("net: hns3: fixed reset failure issues caused by the incorrect reset type")
f2c14899ca ("net: hns3: add sync command to sync io-pgtable")
e6ab19443b ("net: hns3: default enable tx bounce buffer when smmu enabled")
The series is making the driver poke into IOMMU internals instead of
implementing appropriate IOMMU workarounds.
Link: https://lore.kernel.org/069c9838-b781-4012-934a-d2626fa78212@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can 2024-11-04
Alexander Hölzl contributes a patch to fix an error in the CAN j1939
documentation.
Thomas Mühlbacher's patch allows building of the {cc770,sja1000}_isa
drivers on x86_64 again.
A patch by me targets the m_can driver and limits the call to
free_irq() to devices with IRQs.
Dario Binacchi's patch fixes the RX and TX error counters in the c_can
driver.
The next 2 patches target the rockchip_canfd driver. Geert
Uytterhoeven's patch lets the driver depend on ARCH_ROCKCHIP. Jean
Delvare's patch drops the obsolete dependency on COMPILE_TEST.
The last 2 patches are by me and fix 2 regressions in the mcp251xfd
driver: fix broken coalescing configuration when switching CAN modes
and fix the length calculation of the Transmit Event FIFO (TEF) on
full TEF.
* tag 'linux-can-fixes-for-6.12-20241104' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing configuration when switching CAN modes
can: rockchip_canfd: Drop obsolete dependency on COMPILE_TEST
can: rockchip_canfd: CAN_ROCKCHIP_CANFD should depend on ARCH_ROCKCHIP
can: c_can: fix {rx,tx}_errors statistics
can: m_can: m_can_close(): don't call free_irq() for IRQ-less devices
can: {cc770,sja1000}_isa: allow building on x86_64
can: j1939: fix error in J1939 documentation.
====================
Link: https://patch.msgid.link/20241104200120.393312-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull SoC fixes from Arnd Bergmann:
"Where the last set of fixes was mostly drivers, this time the
devicetree changes all come at once, targeting mostly the Rockchips,
Qualcomm and NXP platforms.
The Qualcomm bugfixes target the Snapdragon X Elite laptops,
specifically problems with PCIe and NVMe support to improve
reliability, and a boot regresion on msm8939.
Also for Snapdragon platforms, there are a number of correctness
changes in the several platform specific device drivers, but none of
these are as impactful.
On the NXP i.MX platform, the fixes are all for 64-bit i.MX8 variants,
correcting individual entries in the devicetree that were incorrect
and causing the media, video, mmc and spi drivers to misbehave in
minor ways.
The Arm SCMI firmware driver gets fixes for a use-after-free bug and
for correctly parsing firmware information.
On the RISC-V side, there are three minor devicetree fixes for
starfive and sophgo, again addressing only minor mistakes. One device
driver patch fixes a problem with spurious interrupt handling"
* tag 'arm-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (63 commits)
firmware: arm_scmi: Use vendor string in max-rx-timeout-ms
dt-bindings: firmware: arm,scmi: Add missing vendor string
riscv: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
arm64: dts: rockchip: Correct GPIO polarity on brcm BT nodes
arm64: dts: rockchip: Drop invalid clock-names from es8388 codec nodes
ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylin
ARM: dts: rockchip: Fix the spi controller on rk3036
ARM: dts: rockchip: drop grf reference from rk3036 hdmi
ARM: dts: rockchip: fix rk3036 acodec node
arm64: dts: rockchip: remove orphaned pinctrl-names from pinephone pro
soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
rpmsg: glink: Handle rejected intent request better
arm64: dts: qcom: x1e80100: fix PCIe5 interconnect
arm64: dts: qcom: x1e80100: fix PCIe4 interconnect
arm64: dts: qcom: x1e80100: Fix up BAR spaces
MAINTAINERS: invert Misc RISC-V SoC Support's pattern
soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
arm64: dts: qcom: x1e80100-qcp: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-microsoft-romulus: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-yoga-slim7x: fix nvme regulator boot glitch
...
This is a partial revert to commit 76a0a3f9cc ("e1000e: fix force smbus
during suspend flow"). That commit fixed a sporadic PHY access issue but
introduced a regression in runtime suspend flows.
The original issue on Meteor Lake systems was rare in terms of the
reproduction rate and the number of the systems affected.
After the integration of commit 0a6ad4d9e1 ("e1000e: avoid failing the
system during pm_suspend"), PHY access loss can no longer cause a
system-level suspend failure. As it only occurs when the LAN cable is
disconnected, and is recovered during system resume flow. Therefore, its
functional impact is low, and the priority is given to stabilizing
runtime suspend.
Fixes: 76a0a3f9cc ("e1000e: fix force smbus during suspend flow")
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix a race condition in the i40e driver that leads to MAC/VLAN filters
becoming corrupted and leaking. Address the issue that occurs under
heavy load when multiple threads are concurrently modifying MAC/VLAN
filters by setting mac and port VLAN.
1. Thread T0 allocates a filter in i40e_add_filter() within
i40e_ndo_set_vf_port_vlan().
2. Thread T1 concurrently frees the filter in __i40e_del_filter() within
i40e_ndo_set_vf_mac().
3. Subsequently, i40e_service_task() calls i40e_sync_vsi_filters(), which
refers to the already freed filter memory, causing corruption.
Reproduction steps:
1. Spawn multiple VFs.
2. Apply a concurrent heavy load by running parallel operations to change
MAC addresses on the VFs and change port VLANs on the host.
3. Observe errors in dmesg:
"Error I40E_AQ_RC_ENOSPC adding RX filters on VF XX,
please set promiscuous on manually for VF XX".
Exact code for stable reproduction Intel can't open-source now.
The fix involves implementing a new intermediate filter state,
I40E_FILTER_NEW_SYNC, for the time when a filter is on a tmp_add_list.
These filters cannot be deleted from the hash list directly but
must be removed using the full process.
Fixes: 278e7d0b9d ("i40e: store MAC/VLAN filters in a hash with the MAC Address as key")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In an event where the platform running the device control plane
is rebooted, reset is detected on the driver. It releases
all the resources and waits for the reset to complete. Once the
reset is done, it tries to build the resources back. At this
time if the device control plane is not yet started, then
the driver timeouts on the virtchnl message and retries to
establish the mailbox again.
In the retry flow, mailbox is deinitialized but the mailbox
workqueue is still alive and polling for the mailbox message.
This results in accessing the released control queue leading to
null-ptr-deref. Fix it by unrolling the work queue cancellation
and mailbox deinitialization in the reverse order which they got
initialized.
Fixes: 4930fbf419 ("idpf: add core init and interrupt request")
Fixes: 34c21fa894 ("idpf: implement virtchnl transaction manager")
Cc: stable@vger.kernel.org # 6.9+
Reviewed-by: Tarun K Singh <tarun.k.singh@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When the device control plane is removed or the platform
running device control plane is rebooted, a reset is detected
on the driver. On driver reset, it releases the resources and
waits for the reset to complete. If the reset fails, it takes
the error path and releases the vport lock. At this time if the
monitoring tools tries to access link settings, it call traces
for accessing released vport pointer.
To avoid it, move link_speed_mbps to netdev_priv structure
which removes the dependency on vport pointer and the vport lock
in idpf_get_link_ksettings. Also use netif_carrier_ok()
to check the link status and adjust the offsetof to use link_up
instead of link_speed_mbps.
Fixes: 02cbfba1ad ("idpf: add ethtool callbacks")
Cc: stable@vger.kernel.org # 6.7+
Reviewed-by: Tarun K Singh <tarun.k.singh@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
