The kfree() function was called in one case by
the apmf_sbios_heartbeat_notify() function during error handling
even if the passed variable contained a null pointer.
This issue was detected by using the Coccinelle software.
* Thus return directly after a call of the function “apmf_if_call” failed
at the beginning.
* Delete the label “out” which became unnecessary with this refactoring.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/362ee824-fc53-4e19-9529-8b621657635b@web.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Merge the 'platform-drivers-x86-v6.7-6' fixes into pdx86/for-next
so that the "Intel PMC GBE LTR regression" fixes can also be
applied to the new Arrow Lake and Lunar Lake platform support
code in pdx86/for-next .
It seems traffic there is quite low and changes are often not related
to PDx86 anyhow. Besides that I have a lot of other stuff to do, I'm
rearly pay attention on these emails. Doesn't seem Daren to be active
either. With this in mind, remove (stale) section.
Note, it might be make sense to actually move that folder under PDx86
umbrella (in MAINTAINERS) if people find it suitable. That will reduce
burden on arch/x86 maintenance.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231222144453.2888706-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit 804951203a ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added at probe. This was needed in order to allow the
SoC to enter the deepest Package C state. To fix the regression and at
least support PC10 during suspend, move the LTR ignore from probe to the
suspend callback, and enable it again on resume. This solution will allow
PC10 during suspend but restrict Package C entry at runtime to no deeper
than PC8/9 while a network cable it attach to the PCH LAN.
Fixes: 804951203a ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-6-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Commit 804951203a ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added during probe. The fix will move the ignore to
occur at suspend-time (so as to not affect suspend power). This will
require the ability to enable the LTR again on resume. Modify
pmc_core_send_ltr_ignore() to allow enabling an LTR.
Fixes: 804951203a ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-5-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a suspend callback to struct pmc for performing platform specific tasks
before device suspend. This is needed in order to perform GBE LTR ignore on
certain platforms at suspend-time instead of at probe-time and replace the
GBE LTR ignore removal that was done in order to fix a bug introduced by
commit 804951203a ("platform/x86:intel/pmc: Combine core_init() and
core_configure()").
Fixes: 804951203a ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-4-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
If PMC discovery using pmc_core_ssram_init() was unsuccessful for the
Meteor Lake platform, the legacy enumeration method is used. In this
case pci device struct for the PMC SSRAM is not available
and pmc_core_ssram_get_lpm_reqs() will not work. Add ssram_init flag to
indicate if the PMC SSRAM initialization was successful or not. Call
pmc_core_ssram_get_lpm_reqs() only if the ssram_init flag is set to true.
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Link: https://lore.kernel.org/r/20231219042216.2592029-6-rajvi.jingar@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently, the ACPI notify handler searches all WMI devices for
a matching WMI event device. This is inefficient since only WMI devices
associated with the notified ACPI device need to be searched.
Use the WMI bus device and device_for_each_child() to search for
a matching WMI event device instead.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231218192420.305411-6-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When removing the ACPI notify/address space handlers, the WMI devices
are still active and might still depend on ACPI EC access or
WMI events.
Fix this by removing the ACPI handlers after all WMI devices
associated with an ACPI device have been removed.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231218192420.305411-3-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF driver based on the output actions from the TA can request to update
the system states like entering s0i3, lock screen etc. by generating
an uevent. Based on the udev rules set in the userspace the event id
matching the uevent shall get updated accordingly using the systemctl.
Sample udev rules under Documentation/admin-guide/pmf.rst.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-9-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
To sideload pmf policy binaries, the Smart PC Solution Builder provides a
debugfs file called "update_policy"; that gets created under a new debugfs
directory called "pb" and this new directory has to be associated with
existing parent directory for PMF driver called "amd_pmf".
In the current code structure, amd_pmf_dbgfs_register() is called after
amd_pmf_init_features(). This will not help when the Smart PC builder
feature has to be assoicated to the parent directory.
Hence change the order of amd_pmf_dbgfs_register() and call it before
amd_pmf_init_features() so that when the Smart PC init happens, it has the
parent debugfs directory to get itself hooked.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF Policy binary is a encrypted and signed binary that will be part
of the BIOS. PMF driver via the ACPI interface checks the existence
of Smart PC bit. If the advertised bit is found, PMF driver walks
the acpi namespace to find out the policy binary size and the address
which has to be passed to the TA during the TA init sequence.
The policy binary is comprised of inputs (or the events) and outputs
(or the actions). With the PMF ecosystem, OEMs generate the policy
binary (or could be multiple binaries) that contains a supported set
of inputs and outputs which could be specifically carved out for each
usage segment (or for each user also) that could influence the system
behavior either by enriching the user experience or/and boost/throttle
power limits.
Once the TA init command succeeds, the PMF driver sends the changing
events in the current environment to the TA for a constant sampling
frequency time (the event here could be a lid close or open) and
if the policy binary has corresponding action built within it, the
TA sends the action for it in the subsequent enact command.
If the inputs sent to the TA has no output defined in the policy
binary generated by OEMs, there will be no action to be performed
by the PMF driver.
Example policies:
1) if slider is performance ; set the SPL to 40W
Here PMF driver registers with the platform profile interface and
when the slider position is changed, PMF driver lets the TA know
about this. TA sends back an action to update the Sustained
Power Limit (SPL). PMF driver updates this limit via the PMFW mailbox.
2) if user_away ; then lock the system
Here PMF driver hooks to the AMD SFH driver to know the user presence
and send the inputs to TA and if the condition is met, the TA sends
the action of locking the system. PMF driver generates a uevent and
based on the udev rule in the userland the system gets locked with
systemctl.
The intent here is to provide the OEM's to make a policy to lock the
system when the user is away ; but the userland can make a choice to
ignore it.
The OEMs will have an utility to create numerous such policies and
the policies shall be reviewed by AMD before signing and encrypting
them. Policies are shared between operating systems to have seemless user
experience.
Since all this action has to happen via the "amdtee" driver, currently
there is no caller for it in the kernel which can load the amdtee driver.
Without amdtee driver loading onto the system the "tee" calls shall fail
from the PMF driver. Hence an explicit MODULE_SOFTDEP has been added
to address this.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-5-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In the current code, the metrics table information was required only
for auto-mode or CnQF at a given time. Hence keeping the return type
of amd_pmf_set_dram_addr() as static made sense.
But with the addition of Smart PC builder feature, the metrics table
information has to be shared by the Smart PC also and this feature
resides outside of core.c.
To make amd_pmf_set_dram_addr() visible outside of core.c make it
as a non-static function and move the allocation of memory for
metrics table from amd_pmf_init_metrics_table() to amd_pmf_set_dram_addr()
as amd_pmf_set_dram_addr() is the common function to set the DRAM
address.
Add a suspend handler that can free up the allocated memory for getting
the metrics table information.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF TA (Trusted Application) loads via the TEE environment into the
AMD ASP.
PMF-TA supports two commands:
1) Init: Initialize the TA with the PMF Smart PC policy binary and
start the policy engine. A policy is a combination of inputs and
outputs, where;
- the inputs are the changing dynamics of the system like the user
behaviour, system heuristics etc.
- the outputs, which are the actions to be set on the system which
lead to better power management and enhanced user experience.
PMF driver acts as a central manager in this case to supply the
inputs required to the TA (either by getting the information from
the other kernel subsystems or from userland)
2) Enact: Enact the output actions from the TA. The action could be
applying a new thermal limit to boost/throttle the power limits or
change system behavior.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231212014705.2017474-3-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Immutable branch between pdx86 amd wbrf branch and wifi / amdgpu due for the v6.8 merge window
platform-drivers-x86-amd-wbrf-v6.8-1: v6.7-rc1 + AMD WBRF support
for merging into the wifi subsys and amdgpu driver for 6.8.
Due to electrical and mechanical constraints in certain platform designs
there may be likely interference of relatively high-powered harmonics of
the (G-)DDR memory clocks with local radio module frequency bands used
by Wifi 6/6e/7.
To mitigate this, AMD has introduced a mechanism that devices can use to
notify active use of particular frequencies so that other devices can make
relative internal adjustments as necessary to avoid this resonance.
Co-developed-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
