This so we prevent Tx timeout issues. One of conditions checked on
running in the background dev_watchdog() is netif_carrier_ok(), so let
us turn it off when we disable the queues that belong to a q_vector
where XSK pool is being configured. Turn carrier on in ice_qp_ena()
only when ice_get_link_status() tells us that physical link is up.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Don't bail out right when spotting an error within ice_qp_{dis,ena}()
but rather track error and go through whole flow of disabling and
enabling queue pair.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Given that ice_qp_dis() is called under rtnl_lock, synchronize_net() can
be called instead of synchronize_rcu() so that XDP rings can finish its
job in a faster way. Also let us do this as earlier in XSK queue disable
flow.
Additionally, turn off regular Tx queue before disabling irqs and NAPI.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When ice driver is spammed with multiple xdpsock instances and flow
control is enabled, there are cases when Rx queue gets stuck and unable
to reflect the disable state in QRX_CTRL register. Similar issue has
previously been addressed in commit 13a6233b03 ("ice: Add support to
enable/disable all Rx queues before waiting").
To workaround this, let us simply not wait for a disabled state as later
patch will make sure that regardless of the encountered error in the
process of disabling a queue pair, the Rx queue will be enabled.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Address a scenario in which XSK ZC Tx produces descriptors to XDP Tx
ring when link is either not yet fully initialized or process of
stopping the netdev has already started. To avoid this, add checks
against carrier readiness in ice_xsk_wakeup() and in ice_xmit_zc().
One could argue that bailing out early in ice_xsk_wakeup() would be
sufficient but given the fact that we produce Tx descriptors on behalf
of NAPI that is triggered for Rx traffic, the latter is also needed.
Bringing link up is an asynchronous event executed within
ice_service_task so even though interface has been brought up there is
still a time frame where link is not yet ok.
Without this patch, when AF_XDP ZC Tx is used simultaneously with stack
Tx, Tx timeouts occur after going through link flap (admin brings
interface down then up again). HW seem to be unable to transmit
descriptor to the wire after HW tail register bump which in turn causes
bit __QUEUE_STATE_STACK_XOFF to be set forever as
netdev_tx_completed_queue() sees no cleaned bytes on the input.
Fixes: 126cdfe100 ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Matthieu Baerts says:
====================
mptcp: fix signal endpoint readd
Issue #501 [1] showed that the Netlink PM currently doesn't correctly
support removal and re-add of signal endpoints.
Patches 1 and 2 address the issue: the first one in the userspace path-
manager, introduced in v5.19 ; and the second one in the in-kernel path-
manager, introduced in v5.7.
Patch 3 introduces a related selftest. There is no 'Fixes' tag, because
it might be hard to backport it automatically, as missing helpers in
Bash will not be caught when compiling the kernel or the selftests.
The last two patches address two small issues in the MPTCP selftests,
one introduced in v6.6., and the other one in v5.17.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/501 [1]
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In main_loop_s function, when the open(cfg_input, O_RDONLY) function is
run, the last fd is not closed if the "--cfg_repeat > 0" branch is not
taken.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Liu Jing <liujing@cmss.chinamobile.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
pm_nl_check_endpoint() currently calls an not existing helper
to mark the test as failed. Fix the wrong call.
Fixes: 03668c65d1 ("selftests: mptcp: join: rework detailed report")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Delete and re-create a signal endpoint and ensure that the PM
actually deletes and re-create the subflow.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the per connection announced address counter is never
decreased. As a consequence, after connection establishment, if
the NL PM deletes an endpoint and adds a new/different one, no
additional subflow is created for the new endpoint even if the
current limits allow that.
Address the issue properly updating the signaled address counter
every time the NL PM removes such addresses.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the per-connection announced address counter is never
decreased. When the user-space PM is in use, this just affect
the information exposed via diag/sockopt, but it could still foul
the PM to wrong decision.
Add the missing accounting for the user-space PM's sake.
Fixes: 8b1c94da1e ("mptcp: only send RM_ADDR in nl_cmd_remove")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cited commit accidentally replaced tgt_net with net in rtnl_dellink().
As a result, IFLA_TARGET_NETNSID is ignored if the interface is specified
with IFLA_IFNAME or IFLA_ALT_IFNAME.
Let's pass tgt_net to rtnl_dev_get().
Fixes: cc6090e985 ("net: rtnetlink: introduce helper to get net_device instance by ifname")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
tp->scaling_ratio is not updated based on skb->len/skb->truesize once
SO_RCVBUF is set leading to the maximum window scaling to be 25% of
rcvbuf after
commit dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale")
and 50% of rcvbuf after
commit 697a6c8cec ("tcp: increase the default TCP scaling ratio").
50% tries to emulate the behavior of older kernels using
sysctl_tcp_adv_win_scale with default value.
Systems which were using a different values of sysctl_tcp_adv_win_scale
in older kernels ended up seeing reduced download speeds in certain
cases as covered in https://lists.openwall.net/netdev/2024/05/15/13
While the sysctl scheme is no longer acceptable, the value of 50% is
a bit conservative when the skb->len/skb->truesize ratio is later
determined to be ~0.66.
Applications not specifying SO_RCVBUF update the window scaling and
the receiver buffer every time data is copied to userspace. This
computation is now used for applications setting SO_RCVBUF to update
the maximum window scaling while ensuring that the receive buffer
is within the application specified limit.
Fixes: dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale")
Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says;
====================
ethtool: more RSS fixes
More fixes for RSS setting. First two patches fix my own bugs
in bnxt conversion to the new API. The third patch fixes
what seems to be a 10 year old issue (present since the Linux
RSS API was created). Fourth patch fixes an issue with
the XArray state being out of sync. And then a small test.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We had a handful of bugs relating to key being either all 0
or just reported incorrectly as all 0. Check for this in
the tests.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We expect drivers implementing the new create/modify/destroy
API to populate the defaults in struct ethtool_rxfh_context.
In legacy API ctx isn't even passed, and rxfh.indir / rxfh.key
are NULL so drivers can't give us defaults even if they want to.
Call get_rxfh() to fetch the values. We can reuse rxfh_dev
for the get_rxfh(), rxfh stores the input from the user.
This fixes IOCTL reporting 0s instead of the default key /
indir table for drivers using legacy API.
Add a check to try to catch drivers using the new API
but not populating the key.
Fixes: 7964e78846 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The indirection table and the key follow struct ethtool_rxfh
in user memory.
To reset the indirection table user space calls SET_RXFH with
table of size 0 (OTOH to say "no change" it should use -1 / ~0).
The logic for calculating the offset where they key sits is
incorrect in this case, as kernel would still offset by the full
table length, while for the reset there is no indir table and
key is immediately after the struct.
$ ethtool -X eth0 default hkey 01:02:03...
$ ethtool -x eth0
[...]
RSS hash key:
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
[...]
Fixes: 3de0b59239 ("ethtool: Support for configurable RSS hash key")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As described in the kdoc for .create_rxfh_context we are responsible
for populating the defaults. The core will not call .get_rxfh
for non-0 context.
The problem can be easily observed since Netlink doesn't currently
use the cache. Using netlink ethtool:
$ ethtool -x eth0 context 1
[...]
RSS hash key:
13:60:cd:60:14:d3:55:36:86:df:90:f2:96:14:e2:21:05:57:a8:8f:a5:12:5e:54:62:7f:fd:3c:15:7e:76:05:71:42:a2:9a:73:80:09:9c
RSS hash function:
toeplitz: on
xor: off
crc32: off
But using IOCTL ethtool shows:
$ ./ethtool-old -x eth0 context 1
[...]
RSS hash key:
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
RSS hash function:
Operation not supported
Fixes: 7964e78846 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit under Fixes I split the bnxt_set_rxfh_context() function,
and attached the appropriate chunks to new ops. I missed that
bnxt_set_rxfh_context() gets called after some initial checks
in bnxt_set_rxfh(), namely that the hash function is Toeplitz.
Fixes: 5c466b4d4e ("eth: bnxt: move from .set_rxfh to .create_rxfh_context and friends")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In testing the recent kernel I found that the fbnic driver couldn't be
enabled on x86_64 builds. A bit of digging showed that the fbnic driver was
the only one to check for S390 to be n, all others had checked for !S390.
Since it is a boolean and not a tristate I am not sure it will be N. So
just update it to use the !S390 flag.
A quick check via "make menuconfig" verified that after making this change
there was an option to select the fbnic driver.
Fixes 0e03c643dc ("eth: fbnic: fix s390 build.")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/172192698293.1903337.4255690118685300353.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Couple of more urgent fixes:
* ath12k: wowlan loop iteration issue
* ath12k: fix soft lockup on suspend in certain scenarios
* mt76: fix crash when removing an interface
* mac80211: fix injection crash with some drivers that
don't want monitor vif
* cfg80211: fix S1G beacon parsing in scan
* cfg80211: fix MLO link status reporting on connect
* tag 'wireless-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: ath12k: fix soft lockup on suspend
wifi: mt76: mt7921: fix null pointer access in mt792x_mac_link_bss_remove
wifi: ath12k: fix reusing outside iterator in ath12k_wow_vif_set_wakeups()
wifi: cfg80211: correct S1G beacon length calculation
wifi: cfg80211: fix reporting failed MLO links status with cfg80211_connect_done
wifi: mac80211: use monitor sdata with driver only if desired
====================
Link: https://patch.msgid.link/20240726122638.942420-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DISCOVERY_FINDING shall only be set for active scanning as passive
scanning is not meant to generate MGMT Device Found events causing
discovering state to go out of sync since userspace would believe it
is discovering when in fact it is just passive scanning.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219088
Fixes: 2e2515c1ba ("Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The caller of these functions in btusb.c is guarded with an
if(IS_ENABLED()) style check, so dead code is left out, but the
declarations are still needed at compile time:
drivers/bluetooth/btusb.c: In function 'btusb_mtk_reset':
drivers/bluetooth/btusb.c:2705:15: error: implicit declaration of function 'btmtk_usb_subsys_reset' [-Wimplicit-function-declaration]
2705 | err = btmtk_usb_subsys_reset(hdev, btmtk_data->dev_id);
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btusb.c: In function 'btusb_send_frame_mtk':
drivers/bluetooth/btusb.c:2720:23: error: implicit declaration of function 'alloc_mtk_intr_urb' [-Wimplicit-function-declaration]
2720 | urb = alloc_mtk_intr_urb(hdev, skb, btusb_tx_complete);
| ^~~~~~~~~~~~~~~~~~
drivers/bluetooth/btusb.c:2720:21: error: assignment to 'struct urb *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
2720 | urb = alloc_mtk_intr_urb(hdev, skb, btusb_tx_complete);
| ^
Fixes: f0c83a23fc ("Bluetooth: btmtk: Fix btmtk.c undefined reference build error")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The previous fix was incomplete as the link failure still persists
with CONFIG_USB=m when the sdio or serial wrappers for btmtk.c
are build-in:
btmtk.c:(.text+0x468): undefined reference to `usb_alloc_urb'
btmtk.c:(.text+0x488): undefined reference to `usb_free_urb'
btmtk.c:(.text+0x500): undefined reference to `usb_anchor_urb'
btmtk.c:(.text+0x50a): undefined reference to `usb_submit_urb'
btmtk.c:(.text+0x92c): undefined reference to `usb_control_msg'
btmtk.c:(.text+0xa92): undefined reference to `usb_unanchor_urb'
btmtk.c:(.text+0x11e4): undefined reference to `usb_set_interface'
btmtk.c:(.text+0x120a): undefined reference to `usb_kill_anchored_urbs'
Disallow this configuration.
Fixes: f0c83a23fc ("Bluetooth: btmtk: Fix btmtk.c undefined reference build error")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
MediaTek moved some usb interface related function to btmtk.c which
may cause build failed if BT USB Kconfig wasn't enabled.
Fix undefined reference by adding config check.
btmtk.c:(.text+0x89c): undefined reference to `usb_alloc_urb'
btmtk.c:(.text+0x8e3): undefined reference to `usb_free_urb'
btmtk.c:(.text+0x956): undefined reference to `usb_free_urb'
btmtk.c:(.text+0xa0e): undefined reference to `usb_anchor_urb'
btmtk.c:(.text+0xb43): undefined reference to `usb_autopm_get_interface'
btmtk.c:(.text+0xb7e): undefined reference to `usb_autopm_put_interface'
btmtk.c:(.text+0xf70): undefined reference to `usb_disable_autosuspend'
btmtk.c:(.text+0x133a): undefined reference to `usb_control_msg'
Fixes: d019930b00 ("Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407091928.AH0aGZnx-lkp@intel.com/
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When suspending the scan filter policy cannot be 0x00 (no acceptlist)
since that means the host has to process every advertisement report
waking up the system, so this attempts to check if hdev is marked as
suspended and if the resulting filter policy would be 0x00 (no
acceptlist) then skip passive scanning if thre no devices in the
acceptlist otherwise reset the filter policy to 0x01 so the acceptlist
is used since the devices programmed there can still wakeup be system.
Fixes: 182ee45da0 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Do not attempt to send any hci command to controller if *setup* function
fails.
Fixes: af395330ab ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The PHY built in to the Realtek RTL8366S switch controller was
previously supported by genphy_driver. This PHY does not implement MMD
operations. Since commit 9b01c885be ("net: phy: c22: migrate to
genphy_c45_write_eee_adv()"), MMD register reads have been made during
phy_probe to determine EEE support. For genphy_driver, these reads are
transformed into 802.3 annex 22D clause 45-over-clause 22
mmd_phy_indirect operations that perform MII register writes to
MII_MMD_CTRL and MII_MMD_DATA. This overwrites those two MII registers,
which on this PHY are reserved and have another function, rendering the
PHY unusable while so configured.
Proper support for this PHY is restored by providing a phy_driver that
declares MMD operations as unsupported by using the helper functions
provided for that purpose, while remaining otherwise identical to
genphy_driver.
Fixes: 9b01c885be ("net: phy: c22: migrate to genphy_c45_write_eee_adv()")
Reported-by: Russell Senior <russell@personaltelco.net>
Closes: https://github.com/openwrt/openwrt/issues/15981
Link: https://github.com/openwrt/openwrt/issues/15739
Signed-off-by: Mark Mentovai <mark@mentovai.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ext interrupts are enabled when the firmware has been started, but
this may never happen, for example, if the board configuration file is
missing.
When the system is later suspended, the driver unconditionally tries to
disable interrupts, which results in an irq disable imbalance and causes
the driver to spin indefinitely in napi_synchronize().
Make sure that the interrupts have been enabled before attempting to
disable them.
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Cc: stable@vger.kernel.org # 6.3
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240709073132.9168-1-johan+linaro@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Individual MLO links connection status is not copied to
EVENT_CONNECT_RESULT data while processing the connect response
information in cfg80211_connect_done(). Due to this failed links
are wrongly indicated with success status in EVENT_CONNECT_RESULT.
To fix this, copy the individual MLO links status to the
EVENT_CONNECT_RESULT data.
Fixes: 53ad07e982 ("wifi: cfg80211: support reporting failed links")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20240724125327.3495874-1-quic_vjakkam@quicinc.com
[commit message editorial changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In commit 0d9c2beed1 ("wifi: mac80211: fix monitor channel
with chanctx emulation") I changed mac80211 to always have an
internal monitor_sdata to have something to have the chanctx
bound to.
However, if the driver didn't also have the WANT_MONITOR flag
this would cause mac80211 to allocate it without telling the
driver (which was intentional) but also use it for later APIs
to the driver without it ever having known about it which was
_not_ intentional.
Check through the code and only use the monitor_sdata in the
relevant places (TX, MU-MIMO follow settings, TX power, and
interface iteration) when the WANT_MONITOR flag is set.
Cc: stable@vger.kernel.org
Fixes: 0d9c2beed1 ("wifi: mac80211: fix monitor channel with chanctx emulation")
Reported-by: ZeroBeat <ZeroBeat@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219086
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240725184836.25d334157a8e.I02574086da2c5cf0e18264ce5807db6f14ffd9c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It could lead to error happen because the variable res is not updated if
the call to sr_share_read_word returns an error. In this particular case
error code was returned and res stayed uninitialized. Same issue also
applies to sr_read_reg.
This can be avoided by checking the return value of sr_share_read_word
and sr_read_reg, and propagating the error if the read operation failed.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: c9b37458e9 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
ethtool: rss: small fixes to spec and GET
Two small fixes to the ethtool RSS_GET over Netlink.
Spec is a bit inaccurate and responses miss an identifier.
====================
Link: https://patch.msgid.link/20240724234249.2621109-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The response to a GET request in Netlink should fully identify
the queried object. RSS_GET accepts context id as an input,
so it must echo that attribute back to the response.
After (assuming context 1 has been created):
$ ./cli.py --spec netlink/specs/ethtool.yaml \
--do rss-get \
--json '{"header": {"dev-index": 2}, "context": 1}'
{'context': 1,
'header': {'dev-index': 2, 'dev-name': 'eth0'},
[...]
Fixes: 7112a04664 ("ethtool: add netlink based get rss support")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240724234249.2621109-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In __bnxt_reserve_rings(), the existing code unconditionally sets the
default RSS indirection table to default if netif_is_rxfh_configured()
returns false. This used to be correct before we added RSS contexts
support. For example, if the user is changing the number of ethtool
channels, we will enter this path to reserve the new number of rings.
We will then set the RSS indirection table to default to cover the new
number of rings if netif_is_rxfh_configured() is false.
Now, with RSS contexts support, if the user has added or deleted RSS
contexts, we may now enter this path to reserve the new number of VNICs.
However, netif_is_rxfh_configured() will not return the correct state if
we are still in the middle of set_rxfh(). So the existing code may
set the indirection table of the default RSS context to default by
mistake.
Fix it to check if the reservation of the RX rings is changing. Only
check netif_is_rxfh_configured() if it is changing. RX rings will not
change in the middle of set_rxfh() and this will fix the issue.
Fixes: b3d0083caf ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()")
Reported-and-tested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/20240625010210.2002310-1-kuba@kernel.org
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240724222106.147744-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
A lot of networking people were at a conference last week, busy
catching COVID, so relatively short PR.
Current release - regressions:
- tcp: process the 3rd ACK with sk_socket for TFO and MPTCP
Current release - new code bugs:
- l2tp: protect session IDR and tunnel session list with one lock,
make sure the state is coherent to avoid a warning
- eth: bnxt_en: update xdp_rxq_info in queue restart logic
- eth: airoha: fix location of the MBI_RX_AGE_SEL_MASK field
Previous releases - regressions:
- xsk: require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len,
the field reuses previously un-validated pad
Previous releases - always broken:
- tap/tun: drop short frames to prevent crashes later in the stack
- eth: ice: add a per-VF limit on number of FDIR filters
- af_unix: disable MSG_OOB handling for sockets in sockmap/sockhash"
* tag 'net-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
tun: add missing verification for short frame
tap: add missing verification for short frame
mISDN: Fix a use after free in hfcmulti_tx()
gve: Fix an edge case for TSO skb validity check
bnxt_en: update xdp_rxq_info in queue restart logic
tcp: process the 3rd ACK with sk_socket for TFO/MPTCP
selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test
xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len
bpf: Fix a segment issue when downgrading gso_size
net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling
MAINTAINERS: make Breno the netconsole maintainer
MAINTAINERS: Update bonding entry
net: nexthop: Initialize all fields in dumped nexthops
net: stmmac: Correct byte order of perfect_match
selftests: forwarding: skip if kernel not support setting bridge fdb learning limit
tipc: Return non-zero value from tipc_udp_addr2str() on error
netfilter: nft_set_pipapo_avx2: disable softinterrupts
ice: Fix recipe read procedure
ice: Add a per-VF limit on number of FDIR filters
net: bonding: correctly annotate RCU in bond_should_notify_peers()
...
Pull printk updates from Petr Mladek:
- trivial printk changes
The bigger "real" printk work is still being discussed.
* tag 'printk-for-6.11-trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
vsprintf: add missing MODULE_DESCRIPTION() macro
printk: Rename console_replay_all() and update context
Pull sysctl constification from Joel Granados:
"Treewide constification of the ctl_table argument of proc_handlers
using a coccinelle script and some manual code formatting fixups.
This is a prerequisite to moving the static ctl_table structs into
read-only data section which will ensure that proc_handler function
pointers cannot be modified"
* tag 'constfy-sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: treewide: constify the ctl_table argument of proc_handlers
Pull EFI fixes from Ard Biesheuvel:
- Wipe screen_info after allocating it from the heap - used by arm32
and EFI zboot, other EFI architectures allocate it statically
- Revert to allocating boot_params from the heap on x86 when entering
via the native PE entrypoint, to work around a regression on older
Dell hardware
* tag 'efi-fixes-for-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Revert to heap allocated boot_params for PE entrypoint
efi/libstub: Zero initialize heap allocated struct screen_info
Pull kgdb updates from Daniel Thompson:
"Three small changes this cycle:
- Clean up an architecture abstraction that is no longer needed
because all the architectures have converged.
- Actually use the prompt argument to kdb_position_cursor() instead
of ignoring it (functionally this fix is a nop but that was due to
luck rather than good judgement)
- Fix a -Wformat-security warning"
* tag 'kgdb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Get rid of redundant kdb_curr_task()
kdb: Use the passed prompt in kdb_position_cursor()
kdb: address -Wformat-security warnings
Pull MIPS updates from Thomas Bogendoerfer:
- Use improved timer sync for Loongson64
- Fix address of GCR_ACCESS register
- Add missing MODULE_DESCRIPTION
* tag 'mips_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: sibyte: add missing MODULE_DESCRIPTION() macro
MIPS: SMP-CPS: Fix address for GCR_ACCESS register for CM3 and later
MIPS: Loongson64: Switch to SYNC_R4K
