psci_init_system_suspend() invokes suspend_set_ops() very early during
bootup even before kernel command line for mem_sleep_default is setup.
This leads to kernel command line mem_sleep_default=s2idle not working
as mem_sleep_current gets changed to deep via suspend_set_ops() and never
changes back to s2idle.
Set mem_sleep_current along with mem_sleep_default during kernel command
line setup as default suspend mode.
Fixes: faf7ec4a92 ("drivers: firmware: psci: add system suspend support")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
set_memory_ro() and set_memory_rw() can fail, leaving memory
unprotected.
Take the returned value into account and abort in case of
failure.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently the default compression algorithm is selected based on
compile time options. Introduce a module parameter "hibernate.compressor"
to override this behaviour.
Different compression algorithms have different characteristics and
hibernation may benefit when it uses any of these algorithms, especially
when a secondary algorithm(LZ4) offers better decompression speeds over
a default algorithm(LZO), which in turn reduces hibernation image
restore time.
Users can override the default algorithm in two ways:
1) Passing "hibernate.compressor" as kernel command line parameter.
Usage:
LZO: hibernate.compressor=lzo
LZ4: hibernate.compressor=lz4
2) Specifying the algorithm at runtime.
Usage:
LZO: echo lzo > /sys/module/hibernate/parameters/compressor
LZ4: echo lz4 > /sys/module/hibernate/parameters/compressor
Currently LZO and LZ4 are the supported algorithms. LZO is the default
compression algorithm used with hibernation.
Signed-off-by: Nikhil V <quic_nprakash@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to the context, 'pci_pm_suspend_noirq' is the right
word for the changed sentence.
Signed-off-by: Yiwei Lin <s921975628@gmail.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Extend the support for LZ4 compression to be used with hibernation.
The main idea is that different compression algorithms
have different characteristics and hibernation may benefit when it uses
any of these algorithms: a default algorithm, having higher
compression rate but is slower(compression/decompression) and a
secondary algorithm, that is faster(compression/decompression) but has
lower compression rate.
LZ4 algorithm has better decompression speeds over LZO. This reduces
the hibernation image restore time.
As per test results:
LZO LZ4
Size before Compression(bytes) 682696704 682393600
Size after Compression(bytes) 146502402 155993547
Decompression Rate 335.02 MB/s 501.05 MB/s
Restore time 4.4s 3.8s
LZO is the default compression algorithm used for hibernation. Enable
CONFIG_HIBERNATION_COMP_LZ4 to set the default compressor as LZ4.
Signed-off-by: Nikhil V <quic_nprakash@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently for hibernation, LZO is the only compression algorithm
available and uses the existing LZO library calls. However, there
is no flexibility to switch to other algorithms which provides better
results. The main idea is that different compression algorithms have
different characteristics and hibernation may benefit when it uses
alternate algorithms.
By moving to crypto based APIs, it lays a foundation to use other
compression algorithms for hibernation. There are no functional changes
introduced by this approach.
Signed-off-by: Nikhil V <quic_nprakash@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Renaming lzo* to generic names, except for lzo_xxx() APIs. This is
used in the next patch where we move to crypto based APIs for
compression. There are no functional changes introduced by this
approach.
Signed-off-by: Nikhil V <quic_nprakash@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Simplify the system-wide suspend of devices by invoking dpm_async_fn()
directly from the main loop in each suspend phase instead of using an
additional wrapper function for running it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
During a system-wide suspend of devices, dpm_noirq_suspend_devices(),
dpm_suspend_late() and dpm_suspend() move devices from one list to
another. They do it with each device after its PM callback in the
given suspend phase has run or has been scheduled for asynchronous
execution, in case it is deleted from the current list in the
meantime.
However, devices can be moved to a new list before invoking their PM
callbacks (which usually is the case for the devices whose callbacks
are executed asynchronously anyway), because doing so does not affect
the ordering of that list. In either case, each device is moved to
the new list after the previous device has been moved to it or gone
away, and if a device is removed, it does not matter which list it is
in at that point, because deleting an entry from a list does not change
the ordering of the other entries in it.
Accordingly, modify the functions mentioned above to move devices to
new lists without waiting for their PM callbacks to run regardless of
whether or not they run asynchronously.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
The async_error and pm_transition variables are set under dpm_list_mtx
in multiple places in the system-wide device PM core code, which is
unnecessary and confusing, so rearrange the code so that the variables
in question are set before acquiring the lock.
While at it, add some empty code lines around locking to improve the
consistency of the code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
The error logging and failure statistics updates are carried out in two
places in each system-wide device suspend phase, which is unnecessary
code duplication, so do that in one place in each phase, right after
invoking device suspend callbacks.
While at it, add "noirq" or "late" to the "async" string printed when
the failing device callback in the "noirq" or "late" suspend phase,
respectively, was run asynchronously.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Because dpm_save_failed_dev() may be called simultaneously by multiple
failing device PM functions, the state of the suspend_stats fields
updated by it may become inconsistent.
Prevent that from happening by using a lock in dpm_save_failed_dev().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
If the handling of two or more devices fails in one suspend-resume
phase, it should be counted once in the statistics which is not
guaranteed to happen during system-wide resume of devices due to
the possible asynchronous execution of device callbacks.
Address this by using the async_error static variable during system-wide
device resume to indicate that there has been a device resume error and
the given suspend-resume phase should be counted as failing.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
It is not necessary to define struct suspend_stats in a header file and the
suspend_stats variable in the core device system-wide PM code. They both
can be defined in kernel/power/main.c, next to the sysfs and debugfs code
accessing suspend_stats, which can be static.
Modify the code in question in accordance with the above observation and
replace the static inline functions manipulating suspend_stats with
regular ones defined in kernel/power/main.c.
While at it, move the enum suspend_stat_step to the end of suspend.h which
is a more suitable place for it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Change the type of the "success" and "fail" fields in struct
suspend_stats to unsigned int, because they cannot be negative.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Instead of using a set of individual struct suspend_stats fields
representing suspend step failure counters, use an array of counters
indexed by enum suspend_stat_step for this purpose, which allows
dpm_save_failed_step() to increment the appropriate counter
automatically, so that its callers don't need to do that directly.
It also allows suspend_stats_show() to carry out a loop over the
counters array to print their values.
Because the counters cannot become negative, use unsigned int for
representing them.
The only user-observable impact of this change is a different
ordering of entries in the suspend_stats debugfs file which is not
expected to matter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Replace suspend_step_name() in the suspend statistics code with an array
of suspend step names which has fewer lines of code and less overhead.
While at it, remove two unnecessary line breaks in suspend_stats_show()
and adjust some white space in there to the kernel coding style for a
more consistent code layout.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Notice that devices can be moved to dpm_prepared_list before running
their resume callbacks, in analogy with dpm_noirq_resume_devices() and
dpm_resume_early(), because doing so will not affect the final ordering
of that list.
Namely, if a device is the first dpm_suspended_list entry while
dpm_list_mtx is held, it has not been removed so far and it cannot be
removed until dpm_list_mtx is released, so moving it to dpm_prepared_list
at that point is valid. If it is removed later, while its resume
callback is running, it will be deleted from dpm_prepared_list without
changing the ordering of the other devices in that list.
Accordingly, rearrange the while () loop in dpm_resume() to move
devices to dpm_prepared_list before running their resume callbacks and
implify the locking and device reference counting in it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
For some 1-bit fields in struct dev_pm_info the data type is bool, while
for some other 1-bit fields in there it is unsigned int, and these
differences are somewhat arbitrary.
For consistency, change the data type of the latter to bool, so that all
of the 1-bit fields in struct dev_pm_info fields are bool.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull more bcachefs updates from Kent Overstreet:
"Some fixes, Some refactoring, some minor features:
- Assorted prep work for disk space accounting rewrite
- BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
makes our trigger context more explicit
- A few fixes to avoid excessive transaction restarts on
multithreaded workloads: fstests (in addition to ktest tests) are
now checking slowpath counters, and that's shaking out a few bugs
- Assorted tracepoint improvements
- Starting to break up bcachefs_format.h and move on disk types so
they're with the code they belong to; this will make room to start
documenting the on disk format better.
- A few minor fixes"
* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
bcachefs: Improve inode_to_text()
bcachefs: logged_ops_format.h
bcachefs: reflink_format.h
bcachefs; extents_format.h
bcachefs: ec_format.h
bcachefs: subvolume_format.h
bcachefs: snapshot_format.h
bcachefs: alloc_background_format.h
bcachefs: xattr_format.h
bcachefs: dirent_format.h
bcachefs: inode_format.h
bcachefs; quota_format.h
bcachefs: sb-counters_format.h
bcachefs: counters.c -> sb-counters.c
bcachefs: comment bch_subvolume
bcachefs: bch_snapshot::btime
bcachefs: add missing __GFP_NOWARN
bcachefs: opts->compression can now also be applied in the background
bcachefs: Prep work for variable size btree node buffers
bcachefs: grab s_umount only if snapshotting
...
Pull timer updates from Thomas Gleixner:
"Updates for time and clocksources:
- A fix for the idle and iowait time accounting vs CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers"
* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
clocksource/drivers/ep93xx: Fix error handling during probe
clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
clocksource/timer-riscv: Add riscv_clock_shutdown callback
dt-bindings: timer: Add StarFive JH8100 clint
dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
Pull powerpc fixes from Aneesh Kumar:
- Increase default stack size to 32KB for Book3S
Thanks to Michael Ellerman.
* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Increase default stack size to 32KB
Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.
And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.
Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.
Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
