When a ring reset happens, the kernel log shows only "amdgpu: Starting
<ring name> ring reset", but when it finishes nothing appears in the
log. Explicitly write in the log that the reset has finished correctly.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After a GPU reset happens, the driver creates a coredump file. However,
the user might not be aware of it. Log the file creation the user can
find more information about the device and add the file to bug reports.
This is similar to what the xe driver does.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add core reset control register definitions and align
all prior register definitions to end at 100 column
length for uniformity.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There was a quirk added to add a workaround for a Sapphire
RX 5600 XT Pulse that didn't allow BAR resizing. However,
the quirk caused a regression with runtime pm on Dell laptops
using those chips, rather than narrowing the scope of the
resizing quirk, add a quirk to prevent amdgpu from resizing
the BAR on those Dell platforms unless runtime pm is disabled.
v2: update commit message, add runpm check
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1707
Fixes: 907830b0fc ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update pmfw headers for smu_v13_0_12 new messages & metrics table.
Static metrics table for frequency added, Separate metrics table
for smu_v13_0_12 added.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates the `amdgpu_job_timedout` function to check if
the ring is actually guilty of causing the timeout. If not, it
skips error handling and fence completion.
v2: move the is_guilty check down into the queue reset area (Alex)
v3: need to call is_guilty before reset (Alex)
v4: squash in is_guilty logic fixes (Alex)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces a new function to check if the SMU supports resetting the SDMA engine.
This capability check ensures that the driver does not attempt to reset the SDMA engine
on hardware that does not support it.
The following changes are included:
- New function `amdgpu_dpm_reset_sdma_is_supported` to check SDMA reset
support at the AMDGPU driver level.
- New function `smu_reset_sdma_is_supported` to check SDMA reset support
at the SMU level.
- Implementation of `smu_v13_0_6_reset_sdma_is_supported` for the specific
SMU version v13.0.6.
- Updated `smu_v13_0_6_reset_sdma` to use the new capability check before
attempting to reset the SDMA engine.
v2: change smu_reset_sdma_is_supported type to bool (Tim)
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a reset function pointer to the SDMA v4.4.2 page ring
functionality. The new function pointer `reset` is set to
`sdma_v4_4_2_reset_queue`, which is responsible for resetting the SDMA queue.
Changes:
- Add `reset` function pointer to `sdma_v4_4_2_page_ring_funcs`.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch includes the remaining improvements to the SDMA reset logic:
- Added `gfx_guilty` and `page_guilty` flags to track guilty queues.
- Updated the reset and resume functions to handle the guilty state.
- Cached the `rptr` before reset.
v2:
1.replace the caller with a guilty bool.
If the queue is the guilty one, set the rptr and wptr to the saved wptr value,
else, set the rptr and wptr to the saved rptr value. (Alex)
2. cache the rptr before the reset. (Alex)
v3: Keeping intermediate variables like u64 rwptr simplifies resotre rptr/wptr.(Lijo)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces the following changes:
- Add `cached_rptr` to the `amdgpu_ring` structure to store the read pointer before a reset.
- Add `is_guilty` callback to the `amdgpu_ring_funcs` structure to check if a ring is guilty of causing a timeout.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Modify the `amdgpu_sdma_reset_engine` function to accept a `suspend_user_queues` parameter.
- This parameter allows the function to conditionally suspend and resume user queues during SDMA resets.
- Ensure that user queues are suspended only when necessary to avoid unnecessary overhead and potential deadlocks.
- Restart the scheduler's work queue for the GFX and page rings after the reset to allow new tasks to be submitted.
This change improves synchronization between the KGD and the KFD during SDMA resets,
ensuring proper handling of user queues and avoiding race conditions.
V2: replace the ring_lock with the existed the scheduler
locks for the queues (ring->sched) on the sdma engine.(Alex)
v3: call drm_sched_wqueue_stop() rather than job_list_lock.
If a GPU ring reset was already initiated for one ring at amdgpu_job_timedout,
skip resetting that ring and call drm_sched_wqueue_stop()
for the other rings (Alex)
replace the common lock (sdma_reset_lock) with DQM lock to
to resolve reset races between the two driver sections during KFD eviction.(Jon)
Rename the caller to Reset_src and
Change AMDGPU_RESET_SRC_SDMA_KGD/KFD to AMDGPU_RESET_SRC_SDMA_HWS/RING (Jon)
v4: restart the wqueue if the reset was successful,
or fall back to a full adapter reset. (Alex)
move definition of reset source to enumeration AMDGPU_RESET_SRCS, and
check reset src in amdgpu_sdma_reset_instance (Jon)
v5: Call amdgpu_amdkfd_suspend/resume at the start/end of reset function respectively under !SRC_HWS
conditions only (Jon)
v6: replace the paramter src with a bool suspend_user_queues,
remove the paramter src in pre/post func. (Jon)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Suggested-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Acked-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Users can check the file "/sys/kernel/debug/dri/0/amdgpu_firmware_info"
to get information on the firmware loaded in the system. This file has
multiple acronyms that are not documented in the glossary. This commit
introduces some missing acronyms to the AMD glossary documentation. The
meaning of each acronym in this commit was extracted from code
documentation available in the following files:
- drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c
- drivers/gpu/drm/amd/include/amd_shared.h
Changes since v1:
- Expand acronym meanings based on Alex Deucher suggestions.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch refactors the SDMA reset functionality in the `sdma_v4_4_2` driver
to improve modularity and support shared usage between AMDGPU and KFD. The
changes include:
1. **Refactored SDMA Reset Logic**:
- Split the `sdma_v4_4_2_reset_queue` function into two separate functions:
- `sdma_v4_4_2_stop_queue`: Stops the SDMA queue before reset.
- `sdma_v4_4_2_restore_queue`: Restores the SDMA queue after reset.
- These functions are now used as callbacks for the shared reset mechanism.
2. **Added Callback Support**:
- Introduced a new structure `sdma_v4_4_2_reset_funcs` to hold the stop and
restore callbacks.
- Added `sdma_v4_4_2_set_reset_funcs` to register these callbacks with the
shared reset mechanism using `amdgpu_set_on_reset_callbacks`.
3. **Fixed Reset Queue Function**:
- Modified `sdma_v4_4_2_reset_queue` to use the shared `amdgpu_sdma_reset_queue`
function, ensuring consistency across the driver.
This patch ensures that SDMA reset functionality is more modular, reusable, and
aligned with the shared reset mechanism between AMDGPU and KFD.
v2: Renamed sdma_v4_4_2_set_reset_funcs to sdma_v4_4_2_set_engine_reset_funcs.
Renamed sdma_v4_4_2_reset_funcs to sdma_v4_4_2_engine_reset_funcs.(Alex)
Suggested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces shared SDMA reset functionality between AMDGPU and KFD.
The implementation includes the following key changes:
1. Added `amdgpu_sdma_reset_queue`:
- Resets a specific SDMA queue by instance ID.
- Invokes registered pre-reset and post-reset callbacks to allow KFD and AMDGPU
to save/restore their state during the reset process.
2. Added `amdgpu_set_on_reset_callbacks`:
- Allows KFD and AMDGPU to register callback functions for pre-reset and
post-reset operations.
- Callbacks are stored in a global linked list and invoked in the correct order
during SDMA reset.
This patch ensures that both AMDGPU and KFD can handle SDMA reset events
gracefully, with proper state saving and restoration. It also provides a flexible
callback mechanism for future extensions.
v2: fix CamelCase and put the SDMA helper into amdgpu_sdma.c (Alex)
v3: rename the `amdgpu_register_on_reset_callbacks` function to
`amdgpu_sdma_register_on_reset_callbacks`
move global reset_callback_list to struct amdgpu_sdma (Alex)
v4: Update the reset callback function description and
rename the reset function to amdgpu_sdma_reset_engine (Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When userspace applications call AMDKFD_IOC_UPDATE_QUEUE. Preserve
bitfields that do not need to be modified as they contain flags to
track queue states that are used by CP FW.
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the kfd_process_device_init_vm function, a valid error code is now
returned when the associated Process Address Space ID (PASID) is not
present.
If the address space virtual memory (avm) does not have an associated
PASID, the function sets the ret variable to -EINVAL before proceeding
to the error handling section. This ensures that the calling function,
such as kfd_ioctl_acquire_vm, can appropriately handle the error,
thereby preventing any issues during virtual memory initialization.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:1694 kfd_process_device_init_vm()
warn: missing error code 'ret'
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c
1647 int kfd_process_device_init_vm(struct kfd_process_device *pdd,
1648 struct file *drm_file)
1649 {
...
1690
1691 if (unlikely(!avm->pasid)) {
1692 dev_warn(pdd->dev->adev->dev, "WARN: vm %p has no pasid associated",
1693 avm);
--> 1694 goto err_get_pasid;
ret = -EINVAL?
1695 }
Fixes: 8544374c0f ("drm/amdkfd: Have kfd driver use same PASID values from graphic driver")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Xiaogang Chen <xiaogang.chen@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If firmware supported NPS modes are available through CAP register, use
those values for supported NPS modes.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SMU v13.0.12, always query the firmware to get the current power
limit as it could be updated through other means also.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ring reset function callback for JPEG4_0_3 to
recover from job timeouts without a full gpu reset.
V2:
- sched->ready flag shouldn't be modified by HW backend (Christian)
V3:
- Dont modifying sched/job-submission state from HW backend (Christian)
- Implement per-core reset sequence
V4:
- Dont create reset_mask sysfs and return -EOPNOTSUPP on VFs (Lijo)
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RLCG Register Access is a way for virtual functions to safely access GPU
registers in a virtualized environment., including TLB flushes and
register reads. When multiple threads or VFs try to access the same
registers simultaneously, it can lead to race conditions. By using the
RLCG interface, the driver can serialize access to the registers. This
means that only one thread can access the registers at a time,
preventing conflicts and ensuring that operations are performed
correctly. Additionally, when a low-priority task holds a mutex that a
high-priority task needs, ie., If a thread holding a spinlock tries to
acquire a mutex, it can lead to priority inversion. register access in
amdgpu_virt_rlcg_reg_rw especially in a fast code path is critical.
The call stack shows that the function amdgpu_virt_rlcg_reg_rw is being
called, which attempts to acquire the mutex. This function is invoked
from amdgpu_sriov_wreg, which in turn is called from
gmc_v11_0_flush_gpu_tlb.
The [ BUG: Invalid wait context ] indicates that a thread is trying to
acquire a mutex while it is in a context that does not allow it to sleep
(like holding a spinlock).
Fixes the below:
[ 253.013423] =============================
[ 253.013434] [ BUG: Invalid wait context ]
[ 253.013446] 6.12.0-amdstaging-drm-next-lol-050225 #14 Tainted: G U OE
[ 253.013464] -----------------------------
[ 253.013475] kworker/0:1/10 is trying to lock:
[ 253.013487] ffff9f30542e3cf8 (&adev->virt.rlcg_reg_lock){+.+.}-{3:3}, at: amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.013815] other info that might help us debug this:
[ 253.013827] context-{4:4}
[ 253.013835] 3 locks held by kworker/0:1/10:
[ 253.013847] #0: ffff9f3040050f58 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680
[ 253.013877] #1: ffffb789c008be40 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680
[ 253.013905] #2: ffff9f3054281838 (&adev->gmc.invalidate_lock){+.+.}-{2:2}, at: gmc_v11_0_flush_gpu_tlb+0x198/0x4f0 [amdgpu]
[ 253.014154] stack backtrace:
[ 253.014164] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Tainted: G U OE 6.12.0-amdstaging-drm-next-lol-050225 #14
[ 253.014189] Tainted: [U]=USER, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 253.014203] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/18/2024
[ 253.014224] Workqueue: events work_for_cpu_fn
[ 253.014241] Call Trace:
[ 253.014250] <TASK>
[ 253.014260] dump_stack_lvl+0x9b/0xf0
[ 253.014275] dump_stack+0x10/0x20
[ 253.014287] __lock_acquire+0xa47/0x2810
[ 253.014303] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.014321] lock_acquire+0xd1/0x300
[ 253.014333] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.014562] ? __lock_acquire+0xa6b/0x2810
[ 253.014578] __mutex_lock+0x85/0xe20
[ 253.014591] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.014782] ? sched_clock_noinstr+0x9/0x10
[ 253.014795] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.014808] ? local_clock_noinstr+0xe/0xc0
[ 253.014822] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.015012] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.015029] mutex_lock_nested+0x1b/0x30
[ 253.015044] ? mutex_lock_nested+0x1b/0x30
[ 253.015057] amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.015249] amdgpu_sriov_wreg+0xc5/0xd0 [amdgpu]
[ 253.015435] gmc_v11_0_flush_gpu_tlb+0x44b/0x4f0 [amdgpu]
[ 253.015667] gfx_v11_0_hw_init+0x499/0x29c0 [amdgpu]
[ 253.015901] ? __pfx_smu_v13_0_update_pcie_parameters+0x10/0x10 [amdgpu]
[ 253.016159] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.016173] ? smu_hw_init+0x18d/0x300 [amdgpu]
[ 253.016403] amdgpu_device_init+0x29ad/0x36a0 [amdgpu]
[ 253.016614] amdgpu_driver_load_kms+0x1a/0xc0 [amdgpu]
[ 253.017057] amdgpu_pci_probe+0x1c2/0x660 [amdgpu]
[ 253.017493] local_pci_probe+0x4b/0xb0
[ 253.017746] work_for_cpu_fn+0x1a/0x30
[ 253.017995] process_one_work+0x21e/0x680
[ 253.018248] worker_thread+0x190/0x330
[ 253.018500] ? __pfx_worker_thread+0x10/0x10
[ 253.018746] kthread+0xe7/0x120
[ 253.018988] ? __pfx_kthread+0x10/0x10
[ 253.019231] ret_from_fork+0x3c/0x60
[ 253.019468] ? __pfx_kthread+0x10/0x10
[ 253.019701] ret_from_fork_asm+0x1a/0x30
[ 253.019939] </TASK>
v2: s/spin_trylock/spin_lock_irqsave to be safe (Christian).
Fixes: e864180ee4 ("drm/amdgpu: Add lock around VF RLCG interface")
Cc: lin cao <lin.cao@amd.com>
Cc: Jingwen Chen <Jingwen.Chen2@amd.com>
Cc: Victor Skvortsov <victor.skvortsov@amd.com>
Cc: Zhigang Luo <zhigang.luo@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Summary:
* Add support for disconnected eDP streams
* Add log for MALL entry on DCN32x
* Add DCC/Tiling reset helper for DCN and DCE
* Guard against setting dispclk low when active
* Other minor fixes
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
eDP may not be connected to the GPU on driver start causing
fail enumeration.
[How]
Move the virtual signal type check before the eDP connector
signal check.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In current HPO DP2 implementation, driver would enable/disable DIG
encoder when configuring HPO DP2. Therefore, usb4 dp tunnelling should
not use the DIG encoder if the corresponded phy is used by a HPO DP2
stream.
[HOW]
A DP2 stream is treated as a dig stream.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We should never apply a minimum dispclk value while in prepare_bandwidth
or while displays are active. This is always an optimization for when
all displays are disabled.
[How]
Defer dispclk optimization until safe_to_lower = true and display_count
reaches 0.
Since 0 has a special value in this logic (ie. no dispclk required)
we also need adjust the logic that clamps it for the actual request
to PMFW.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Reviewed-by: Leo Chen <leo.chen@amd.com>
Reviewed-by: Syed Hassan <syed.hassan@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The informative structure needs to be extended by the total number of DPPs
required per each active plane.
The new informative field is going to be used as a statistical indicator.
[How]
The dml2_core_calcs_get_informative() routine must count a total number of DPPs.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Oleh Kuzhylnyi <okuzhyln@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The latest DP spec requires the DP TX to read DPCD F0000h through F0009h
when detecting LTTPR capabilities for the first time.
[How]
Update LTTPR cap retrieval to read up to F0009h (two more bytes than the
previous F0007h), and store the LTTPR ALPM capabilities.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
