It's just an empty module at the moment, selected by COMEDI_NI_LABPC_ISA
&& ISA_DMA_API && VIRT_TO_BUS, but will be populated by later patches to
migrate ISA DMA support for NI Lab-PC cards out of the "ni_labpc"
module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`labpc_ai_cmd()` calls `labpc_cancel()` which already sets
`devpriv->cmd3` to 0. Remove the lines from `labpc_ai_cmd()` that clear
specific bits in `devpriv->cmd3` explicitly as they have no effect.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If `labpc_attach()` allocates memory for `devpriv->dma_buffer` but fails
to request a DMA channel, it frees `devpriv->dma_buffer` but leaves the
pointer set. Later, `labpc_detach()` frees `devpriv->dma_buffer` again,
which means it has been freed twice in this case.
Fix it by only setting `devpriv->dma_buffer` in `labpc_attach()` if the
DMA channel was requested successfully.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Low-level comedi drivers registered with the comedi core by
`comedi_driver_register()` are linked together into a simple linked list
headed by the `comedi_drivers` variable and chained by the `next` member
of `struct comedi_driver`. A driver is removed from the list by
`comedi_driver_unregister()`. The driver list is iterated through by
`comedi_device_attach()` when the `COMEDI_DEVCONFIG` ioctl is used to
attach a "legacy" device to a driver, and is also iterated through by
`comedi_read()` in "proc.c" when reading "/proc/comedi".
There is currently no protection against items being added or removed
from the list while it is being iterated. Add a mutex
`comedi_drivers_list_lock` to be locked while adding or removing an item
on the list, or when iterating through the list.
`comedi_driver_unregister()` also checks for and detaches any devices
using the driver. This is currently done before unlinking the driver
from the list, but it makes more sense to unlink the driver from the
list first to prevent `comedi_device_attach()` attempting to use it, so
move the unlinking part to the start of the function. Also, in
`comedi_device_attach()` hold on to the mutex until we've finished
attempting to attach the device to avoid it interfering with the
detachment in `comedi_driver_unregister()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'Unregister' functions generally return `void`.
`comedi_driver_unregister()` currently returns an `int` errno value.
Nothing looks at the return value. Change the return type to `void`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver can support the WinSystems PCM-IO48 PC/104 board. That
board has two 8255 devices providing 48 digital I/O channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Intelligent Instrumentation PCI-20001C board is a legacy PC/XT/AT
8-bit ISA board not a PCI board. The "PCI" appears to mean "Personal
Computer Instrumentation".
Move the Kconfig option into the COMEDI_ISA group.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the ioport resources are managed by the comedi core. None of
the drivers depend on <linux/ioport.h>. Remove the includes.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
comedidev.h is the main kernel header for comedi. Every comedi
driver includes this header which then includes a number of
<linux/*> headers. All the drivers need <linux/module.h> and some
of them need <linux/delay.h>. The rest are not needed by any of
the drivers.
Remove all the includes in comedidev.h except for <linux/dma-mapping.h>,
which is needed to pick up the enum dma_data_direction for the
comedi_subdevice definition, and "comedi.h", which is the uapi
header for comedi.
Add <linux/module.h> to all the comedi drivers and <linux/delay.h>
to the couple that need it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the helper function to allocate memory and set the comedi_device
private data pointer.
This removes the dependency on slab.h from most of the drivers so
remove the global #include in comedidev.h and the local #include
in some of the drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This removes a bunch of unused helper macros in the kp30.h file as they
were not being used anywhere, and they better not be used in the future.
Cc: Peng Tao <tao.peng@emc.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
use ERR_CAST() function instead of ERR_PTR() and PTR_ERR()
found using coccinelle and err_cast.cocci
Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the standard, listxattr(2) should return -1
and errno should be set to ERANGE if the size of the list
buffer is too small to hold the result. However ll_listxattr()
will return a value bigger than the size of buffer in some cases.
Let's assume listxattr(2) returns SIZE when it is called with a
large enough list buffer. If it's called again with a list buffer
whose size is smaller than SIZE but bigger than (SIZE - 12), then
listxattr(2) will return SIZE too. This patch fixes the problem.
Original patch by Li Xi <pkuelelixi@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3403
Lustre-change: http://review.whamcloud.com/6463
Signed-off-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Li Xi <pkuelelixi@gmail.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, I accidentally introduced a new way for duplicate
directory entries to be returned from readdir(). That patch fails
to properly decrement the nlupgs counter when breaking out of the
inner-for loop. This accounting error causes an extra iteration
of the inner-for loop when processing the next cfs page and a bad
ldp_hash_end value is then saved in the lu_dirpage. To fix this,
always decrement the nlupgs counter on entry into the inner loop.
Note: this bug only affects architectures with > 4k-sized pages, e.g.
PowerPC.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3182
Lustre-change: http://review.whamcloud.com/6405
Signed-off-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When creating a hard link to a file, the MDT/MDD/OSD code does
not verify whether the target link name already exists in the
directory. The ZFS ZAP code checks for duplicate entries. The
add_dirent_to_buf() function in ldiskfs only checks entries for
duplicates while it is traversing the leaf block looking for free
space. Even if it scanned the whole leaf block, this would not
work for non-htree directories since there is no guarantee that
the name is being inserted into the same leaf block.
To fix this, link should check target object doesn't exist as
other creat operations.
Add sanity.sh test_31o with multiple threads racing to link a new
name into the directory, while ensuring that there is a free entry
in the leaf block that is large enough to hold the duplicate name.
This needs to be racy, because otherwise the client VFS will see
the existing name and not send the RPC to the MDS, hiding the bug.
Add DLDLMRES/PLDLMRES macros for printing the whole lock resource
name (including the name hash) in LDLM_DEBUG() messages in a format
similar to DFID/PFID so they can be found in debug logs more easily.
The patch pickes client side change of the original patch, which only
contains the DLM printk part.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2901
Lustre-change: http://review.whamcloud.com/6591
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When ptlrpc_start_thread fails to create a new thread, it will
finalize and free a struct ptlrpc_thread created and used here.
Considering this, it can be a problem when ptlrpc_svcpt_stop_thread
is driven and handles the struct ptlrpc_thread right after or right
before failure of cfs_create_thread. Because this situation let
the both of ptlrpc_start_thread and ptlrpc_svcpt_stop_threads
access the freed ptlrpc_thread and cause OS panic. Or, it may
happen that ptlrpc_svcpt_stop_threads waits forever holding an
already-freed waitq.
This patch adds an error handling into ptlrpc_start_thread to fix
this problem.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2889
Lustre-change: http://review.whamcloud.com/5552
Signed-off-by: Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* lustre/include/lustre_dlm.h: Remove all bit fields and the unused
weighing callback procedure. respell LDLM_AST_DISCARD_DATA as
LDLM_FL_AST_DISCARD_DATA to match other flags.
* .gitignore: ignore emacs temporary files
* autogen.sh: rebuild the lock bits, if autogen is available.
* contrib/bit-masks/lustre_dlm_flags.def: define the ldlm_lock flags
* contrib/bit-masks/lustre_dlm_flags.tpl: template for emitting text
* contrib/bit-masks/Makefile: construct the .c and .h files
The .c file is for constructing a crash extension and is not
preserved.
* contrib/bit-masks/.gitignore: ignore built products
* lustre/contrib/wireshark/packet-lustre.c: use built files instead
of local versions of the defines.
In the rest of the modified sources, replace flag field references
with bit mask references.
* lustre/osc/osc_lock.c: removed osc_lock_weigh, too
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2771
Lustre-change: http://review.whamcloud.com/5312
Signed-off-by: Bruce Korb <bruce_korb@xyratex.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: Keith Mannthey <Keith.Mannthey@intel.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: <bruce.korb@gmail.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main reason behind this is ldlm_poold walks all namespaces currently
no matter if there are any locks or not. On large systems this could take
quite a bit of time, esp. since ldlm_poold is currently woken up once per
second.
Now every time a client namespace loses it's last resource it is placed
into an inactive list that is not touched by ldlm_poold as pointless.
On creation of a first resource in a namespace it is placed back into
the active list.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2924
Lustre-change: http://review.whamcloud.com/5624
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lustre puts system errors (e.g., ENOTCONN) on wire as numbers
essentially specific to senders' architectures. While this is fine
for x86-only sites, where receivers share the same error number
definition with senders, problems will arise, however, for sites
involving multiple architectures with different error number
definitions. For instance, an ENOTCONN reply from a sparc server will
be put on wire as -57, which, for an x86 client, means EBADSLT
instead.
To solve the problem, this patch defines a set of network errors for
on-wire or on-disk uses. These errors correspond to a subset of the
x86 system errors and share the same number definition, maintaining
compatibility with existing x86 clients and servers.
Then, either error numbers could be translated at run time, or all
host errors going on wire could be replaced with network errors in the
code. This patch does the former by introducing both generic and
field-specific translation routines and calling them at proper places,
so that translations for existing fields are transparent.
(Personally, I tend to think the latter way might be worthwhile, as it
is more straightforward conceptually. Do we really need so many
different errors? Should errors returned by kernel routines really be
passed up and eventually put on wire? There could even be security
implications in that.)
Thank Fujitsu for the original idea and their contributions that make
this available upstream.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2743
Lustre-change: http://review.whamcloud.com/5577
Signed-off-by: Li Wei <wei.g.li@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The race is result of use-after-free situation:
~ ptlrpc_stop_pinger() ~ ptlrpc_pinger_main()
---------------------------------------------------------------
thread_set_flags(SVC_STOPPING)
cfs_waitq_signal(pinger_thread) ...
... thread_set_flags(SVC_STOPPED)
l_wait_event(thread_is_stopped)
OBD_FREE_PTR(pinger_thread)
... cfs_waitq_signal(pinger_thread)
---------------------------------------------------------------
The memory used by pinger_thread might have been freed and
reallocated to something else, when ptlrpc_pinger_main()
used it in cvs_waitq_signal().
Signed-off-by: Li Wei <wei.g.li@intel.com>
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3032
Lustre-change: http://review.whamcloud.com/6040
Reviewed-by: Faccini Bruno <bruno.faccini@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Print the namespace and OBD device name, as well as the first two
lock resource fields (typically the FID) if there is an error with
loading the object from disk. This will be more important with
FID-on-OST and also the MDS. Using fid_extract_from_res_name() isn't
possible in the LDLM code, since the lock resource may not be a FID.
Make fid_extract_quota_resid() argument order and name consistent
with other fid_*_res() functions, with FID first and resource second.
Fix a bug in ofd_lvbo_init() where NULL lvb is accessed on error.
Print FID in ofd_lvbo_update() CDEBUG() and CERROR() messages.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2193
Lustre-change: http://review.whamcloud.com/4501
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
