These fields were only used by si_dpm and are not necessary
anymore. They also may have been incorrect because:
- wm_high was set to the LOW_WATERMARK field of watermark A.
- wm_low was not set on DCE 6 and was always zero.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port of commit 227545b9a0 ("drm/radeon/dpm: Disable sclk
switching on Oland when two 4K 60Hz monitors are connected")
This is an ad-hoc DPM fix, necessary because we don't have
proper bandwidth calculation for DCE 6.
We define "high pixelclock" for SI as higher than necessary
for 4K 30Hz. For example, 4K 60Hz and 1080p 144Hz fall into
this category.
When two high pixel clock displays are connected to Oland,
additionally disable shader clock switching, which results in
a higher voltage, thereby addressing some visible flickering.
v2:
Add more comments.
v3:
Split into two commits for easier review.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to pp_pm_compute_clocks the non-DC display code
has "issues with mclk switching with refresh rates over 120 hz".
The workaround is to disable MCLK switching in this case.
Do the same for legacy DPM.
Fixes: 6ddbd37f10 ("drm/amd/pm: optimize the amdgpu_pm_compute_clocks() implementations")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some parts of the code base expect that MCLK switching is turned
off when the vblank time is set to zero.
According to pp_pm_compute_clocks the non-DC code has issues
with MCLK switching with refresh rates over 120 Hz.
v3:
Add code comment to explain this better.
Add an if statement instead of changing the switch_limit.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based on some comments in dm_pp_display_configuration
above the crtc_index and line_time fields, these values
are programmed to the SMC to work around an SMC hang
when it switches MCLK.
According to Alex, the Windows driver programs them to:
mclk_change_block_cp_min = 200 / line_time
mclk_change_block_cp_max = 100 / line_time
Let's use the same for the sake of consistency.
Previously we used the watermark values, but it seemed buggy
as the code was mixing up low/high and A/B watermarks, and
was not saving a low watermark value on DCE 6, so
mclk_change_block_cp_max would be always zero previously.
Split this change off from the previous si_upload_smc_data
to make it easier to bisect, in case it causes any issues.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The si_upload_smc_data function uses si_write_smc_soft_register
to set some register values in the SMC, and expects the result
to be PPSMC_Result_OK which is 1.
The PPSMC_Result_OK / PPSMC_Result_Failed values are used for
checking the result of a command sent to the SMC.
However, the si_write_smc_soft_register actually doesn't send
any commands to the SMC and returns zero on success,
so this check was incorrect.
Fix that by not checking the return value, just like other
calls to si_write_smc_soft_register.
v3:
Additionally, when no display is plugged in, there is no need
to restrict MCLK switching, so program the registers to zero.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SMC can take an excessive amount of time to process some
messages under some conditions.
Background:
Sending a message to the SMC works by writing the message into
the mmSMC_MESSAGE_0 register and its optional parameter into
the mmSMC_SCRATCH0, and then polling mmSMC_RESP_0. Previously
the timeout was AMDGPU_MAX_USEC_TIMEOUT, ie. 100 ms.
Increase the timeout to 200 ms for all messages and to 1 sec for
a few messages which I've observed to be especially slow:
PPSMC_MSG_NoForcedLevel
PPSMC_MSG_SetEnabledLevels
PPSMC_MSG_SetForcedLevels
PPSMC_MSG_DisableULV
PPSMC_MSG_SwitchToSwState
This fixes the following problems on Tahiti when switching
from a lower clock power state to a higher clock state, such
as when DC turns on a display which was previously turned off.
* si_restrict_performance_levels_before_switch would fail
(if the user previously forced high clocks using sysfs)
* si_set_sw_state would fail (always)
It turns out that both of those failures were SMC timeouts and
that the SMC actually didn't fail or hang, just needs more time
to process those.
Add a warning when there is an SMC timeout to make it easier to
identify this type of problem in the future.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always send PPSMC_MSG_DisableULV to the SMC, even if ULV mode
is unsupported, to make sure it is properly turned off.
v3:
Simplify si_disable_ulv further.
Always check the return value of amdgpu_si_send_msg_to_smc.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unlike later versions, UVD 3 has firmware validation.
For this to work, the UVD should be powered up correctly.
When DPM is enabled and the display clock is off,
the SMU may choose a power state which doesn't power
the UVD, which can result in failure to initialize UVD.
v2:
Add code comments to explain about the UVD power state
and how UVD clock is turned on/off.
Fixes: b38f3e80ec ("drm amdgpu: SI UVD v3_1 (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The kfd CRIU checkpoint ioctl would return an error if trying
to checkpoint a process with no kfd buffer objects.
This is a normal case and should not be an error.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new ioctl DRM_IOCTL_AMDGPU_GEM_LIST_HANDLES.
This ioctl returns a list of bos with their handles, sizes,
and flags and domains.
This ioctl is meant to be used during CRIU checkpoint and
provide information needed to reconstruct the bos
in CRIU restore.
Userspace for this and the next change can be found at
https://github.com/checkpoint-restore/criu/pull/2613
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GEM create flag AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE
specifies that gem memory contains sensitive information and
should be cleared to prevent snooping.
The COHERENT and UNCACHED gem create flags enable memory
features related to sharing memory across devices.
For CRIU we need to re-create KFD BOs through the
GEM_CREATE IOCTL, so allow those KFD specific flags here as well.
This will also aid us in the future and allows to move
the KFD components over using the render node for allocations.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
- Add madvise interface (Himal Prasad Ghimiray)
- Add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count and
memory attributes (Himal Prasad Ghimiray)
- Handle Firmware reported Hardware Errors notifying userspace with
device wedged uevent (Riana Tauro)
Cross-subsystem Changes:
- Add a vendor-specific recovery method to drm device wedged uevent
(Riana Tauro)
Driver Changes:
- Use same directory structure in debugfs as in sysfs (Michal Wajdeczko)
- Cleanup and future-proof VRAM region initialization (Piotr Piórkowski)
- Add G-states and PCIe link states to debugfs (Soham Purkait)
- Cleanup eustall debug messages (Harish Chegondi)
- Add SR-IOV support to restore Compression Control Surface (CCS) to
Xe2 and later (Satyanarayana K V P)
- Enable SR-IOV PF mode by default on supported platforms without
needing CONFIG_DRM_XE_DEBUG and mark some platforms behind
force_probe as supported (Michal Wajdeczko)
- More targeted log messages (Michal Wajdeczko)
- Cleanup STEER_SEMAPHORE/MCFG_MCR_SELECTOR usage (Nitin Gote)
- Use common code to emit flush (Tvrtko Ursulin)
- Add/extend more HW workarounds and tunings for Xe2 and Xe3
(Sk Anirban, Tangudu Tilak Tirumalesh, Nitin Gote, Chaitanya Kumar Borah)
- Add a generic dependency scheduler to help with TLB invalidations
and future scenarios (Matthew Brost)
- Use DRM scheduler for delayed GT TLB invalidations (Matthew Brost)
- Error out on incorrect device use in configfs
(Michal Wajdeczko, Lucas De Marchi)
- Refactor configfs attributes (Michal Wajdeczko / Lucas De Marchi)
- Allow configuring future VF devices via configfs (Michal Wajdeczko)
- Implement some missing XeLP workarounds (Tvrtko Ursulin)
- Generalize WA BB setup/emission and add support for
mid context restore BB, aka indirect context (Tvrtko Ursulin)
- Prepare the driver to expose mmio regions to userspace
in future (Ilia Levi)
- Add more GuC load error status codes (John Harrison)
- Document DRM_XE_GEM_CREATE_FLAG_DEFER_BACKING (Priyanka Dandamudi)
- Disable CSC and RPM on VFs (Lukasz Laguna, Satyanarayana K V P)
- Fix oops in xe_gem_fault with PREEMPT_RT (Maarten Lankhorst)
- Skip LMTT update if no LMEM was provisioned (Michal Wajdeczko)
- Add support to VF migration (Tomasz Lis)
- Use a helper for guc_waklv_enable functions (Jonathan Cavitt)
- Prepare GPU SVM for migration of THP (Francois Dugast)
- Program LMTT directory pointer on all GTs within a tile
(Piotr Piórkowski)
- Rename XE_WA to XE_GT_WA to better convey its scope vs the device WAs
(Matt Atwood)
- Allow to match devices on PCI devid/vendorid only (Lucas De Marchi)
- Improve PDE PAT index selection (Matthew Brost)
- Consolidate ASID allocation in xe_vm_create() vs
xe_vm_create_ioctl() (Piotr Piórkowski)
- Resize VF BARS to max possible size according to number of VFs
(Michał Winiarski)
- Untangle vm_bind_ioctl cleanup order (Christoph Manszewski)
- Start fixing usage of XE_PAGE_SIZE vs PAGE_SIZE to improve
compatibility with non-x86 arch (Simon Richter)
- Improve tile vs gt initialization order and accounting
(Gustavo Sousa)
- Extend WA kunit test to PTL
- Ensure data is initialized before transferring to pcode
(Stuart Summers)
- Add PSMI support for HW validation (Lucas De Marchi,
Vinay Belgaumkar, Badal Nilawar)
- Improve xe_dma_buf test (Thomas Hellström, Marcin Bernatowicz)
- Fix basename() usage in generator with !glibc (Carlos Llamas)
- Ensure GT is in C0 during resumes (Xin Wang)
- Add TLB invalidation abstraction (Matt Brost, Stuart Summers)
- Make MI_TLB_INVALIDATE conditional on migrate (Matthew Auld)
- Prepare xe_nvm to be initialized early for future use cases
(Riana Tauro)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/nuejxdhnalyok7tzwkrj67dwjgdafwp4mhdejpyyqnrh4f2epq@nlldovuflnbx
Update the legacy (non-DC) display code to respect the maximum
pixel clock for HDMI and DVI-D. Reject modes that would require
a higher pixel clock than can be supported.
Also update the maximum supported HDMI clock value depending on
the ASIC type.
For reference, see the DC code:
check max_hdmi_pixel_clock in dce*_resource.c
v2:
Fix maximum clocks for DVI-D and DVI/HDMI adapters.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Read link setting inside mode validation is not always the final downlink setting.
It is found true in Synaptics branch device.
At bootup, the preferred mode being set right after 1080p is set. It occurred
before graphic load. That modeset switch in a short period of time makes
the branch device switch back and forth from lower and higher link rate,
observed at Synaptics branch device.
DP2 RTK hub on the other hand, sticks to highest available downlink rate after bootup.
Existing check of runtime downlink setting in mode validation shows asynchronous at
branch device link switch, i.e., downlink switch to higher link rate not yet complete
when the mode validation tries to probe the downlink setting. That makes mode validation
checking downlink setting making wrong decision by pruning modes that should pass the
validation after the downlink setting switch is complete.
[how]
If Synaptics is found at the last branch, skip checking downlink setting
at mode validation.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Previously, when calculating dto phase, we would incorrectly fail when phase
<=0 without additionally checking for the integer value. This meant that
calculations would incorrectly fail when the desired pixel clock was an exact
multiple of the reference clock.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Bounding box values can be stored in multiple locations. (e.g. PMFW, VBIOS, DMUB).
The source and interpretation of these values can vary with DCN revision
so there should be a component that can gather these values and translate
them accordingly
[How]
Have component start with the statically defined values as a base.
Then update them as needed with DCN-specific logic
Guard this component with FPU flags since values need to be in float point.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Custom brightness curve works by walking through all data points one
by one. When the brightness value is at either extreme this is a lot
of data points to walk. This is especially noticeable when moving a
brightness slider around how it can lag.
[How]
Bisect the data points to find the closest for interpolation.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
-Pipe splitting allows for clocks to be reduced, but when using TMDS 420,
reduced clocks lead to missed clocks cycles on clock resyncing
[How]
-Impose a minimum clock when using TMDS 420
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Relja Vojvodic <rvojvodi@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The patch uses power state of VCN instances for requesting video
profile.
In idle worker of a vcn instance, when there is no outstanding
submisssion or fence, the instance is put to power gated state. When
all instances are powered off that means video profile is no longer
required. A request is made to turn off video profile.
A job submission starts with begin_use of ring, and at that time
vcn instance state is changed to power on. Subsequently a check is
made for active video profile, and if not active, a request is made.
Fixes: 3b669df92c ("drm/amdgpu/vcn: adjust workload profile handling")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
1. Unified amdgpu ip block name print with format
"{ip_type}_v{major}_{minor}_{rev}"
2. Avoid IP block name conflicts for SMU/PSP ip block
v2:
Update IP block print format to keep legacy IP block name (Alex)
"{ip_type}_v{major}_{minor}_{rev} ({funcs->name})"
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using the previous firmware could lead to problems with
PROTECTED_FENCE_SIGNAL commands, specifically causing register
conflicts between MCU_DBG0 and MCU_DBG1.
The updated firmware versions ensure proper alignment
and unification of the SDMA_SUBOP_PROTECTED_FENCE_SIGNAL value with SDMA 7.x,
resolving these hardware coordination issues
Fixes: e8cca30d8b ("drm/amdgpu/sdma6: add ucode version checks for userq support")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Notify pmfw when bad page threshold is exceeded, no matter the module
parameter 'bad_page_threshold' is set or not.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For multiple VCN instances case we get multiple lines of the same
message like below:
amdgpu 0000:43:00.0: amdgpu: Found VCN firmware Version ENC: 1.24 DEC: 9 VEP: 0 Revision: 11
amdgpu 0000:43:00.0: amdgpu: Found VCN firmware Version ENC: 1.24 DEC: 9 VEP: 0 Revision: 11
By adding instance number to the log message for multiple VCN instances,
each line will clearly indicate which VCN instance it refers to.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use max() to reduce the code and improve readability.
No functional changes.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a kernel-doc warning by documenting the num_rmcm_3dluts member of struct mpc_color_caps.
v2: improve comment (Melissa)
Signed-off-by: Kavithesh A.S <kavitheshnitt@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc-next for v6.18:
UAPI Changes:
atomic:
- Reallow no-op async page flips
Cross-subsystem Changes:
hid:
- i2c-hid: Make elan touch controllers power on after panel is enabled
video:
- Improve pixel-format handling for struct screen_info
Core Changes:
display:
- dp: Fix command length
Driver Changes:
amdxdna:
- Fixes
bridge:
- Add support for Radxa Ra620 plus DT bindings
msm:
- Fix VMA allocation
panel:
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
stm:
- Clean up logging
vesadrm:
- Support 8-bit palette mode
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250828065714.GA11906@linux.fritz.box
When clearing VRAM we should be able to skip invalidating the TLBs if we
are only using the identity map to access VRAM (which is the common
case), since no modifications are made to PTEs on the fly. Also since we
use huge 1G entries within the identity map, there should be a pretty
decent chance that the next packet(s) (if also clears) can avoid a tree
walk if we don't shoot down the TLBs, like if we have to process a long
stream of clears.
For normal moves/copies, we usually always end up with the src or dst
being system memory, meaning we can't only rely on the identity map and
will also need to emit PTEs and so will always require a TLB flush.
v2:
- Update commit to explain the situation for normal copies (Matt B)
- Rebase on latest changes
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250808110452.467513-2-matthew.auld@intel.com
The frontend exposes an API to the driver to send invalidations, handles
sequence number assignment, synchronization (fences), and provides a
timeout mechanism. The backend issues the actual invalidation to the
hardware (or firmware).
The new layering easily allows issuing TLB invalidations to different
hardware or firmware interfaces.
Normalize some naming while here too.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-10-stuart.summers@intel.com
